Estimate for Repairing of Sanitary work of Bathroom, Electrical Work and Wood Work of Canal Rest House Bibiwala

Amount

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES.

Wiring fan point (Without fan box)

Wiring light point

Wiring 6 Amp. wall socket point

Wiring 16/20 Amp. power plug control point

Recessed air conditioner supply terminal point (Used for HGW, PVC conduit & HDPE Pipe wiring system with modular accessories). Wiring AC supply terminal point having 1 no. 25Amp. universal Socket (shuttered) erected at AC height and 1No. Motor starter 25 Amp. erected at switchboard height.

Overhead distribution aluminium cables, ACSR conductors, clamps, jumpers & Joint kits. PVC insulated & PVC sheathed aluminium conductor cable Overall Size 10 mm² (1/1.40 mm) Twin Core

PVC insulated for copper conductor cables.

Overall size 4 sqmm (Un-sheathed)

Overall size 2.5 sqmm (Un-sheathed)

Supply and erection of PVC flexible pipe complete without compression glands, locking arrangement, check-nuts as required. PVC Flexible Pipe 20 mm dia.

Miniature Circuit Breakers.

MCB Single Pole 6 - 32 amp. (10 kA, Curve-C)

MCB Double Pole 50, 63 amp. (10 kA, Curve- C)

Sheet metal double door distribution board for MCB's/ RCBO's/ RCCB's.

SP & N Double Door Distribution Board 12 way each

Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank.

Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect.

G.I. tank nipple 25 mm i/d

G.I. tank nipple 32 mm i/d

Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.

Providing and fixing jet spray with 2'-6" long PVC pipe. With C.P. Brass nut

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32 mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115 mm long complete in all respect. (Size 450 mm x 300 mm)

Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge) complete in all respect. PVC tube connection of size 15 mm x 300 mm with C.P. Brass nut

Providing and fixing in position vitreous Chinaware white lIndian make large flat back or angular lipped front urinal 375 x 390 x 590 B117 mm of approved make (to the approval of the Engineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32 mm outer length 75 mm , C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube connection 300 mm long complete.

Providing and fixing in position paper holders of approved make (to the approval of Engineer-in-charge ) fixed in to wall with C.P brass screws complete in all respect.

Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. C.P brass towel ring

Providing & Fixing in position 5 mm thick bevelled edge mirror of superior glass (of approved make) complete with 4 mm thick hard board backing fixed in with rawl plugs 50 mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge)(Size 600 mm x 450 mm)

Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1 mm thick, Grade - 304 (18/8) with waste coupling complete in all respect. (a) Rectangular Sink with Deluxe Border Single Bowl Overall Size 700 mm x 555 mm x 230 mm.

Providing & Fixing in postion C.I.bib cock as per IS:210 with stainless steel spindle of approved make (to the approval of Engineerin- charge) complete in all respect. (i) 25 mm i/d

Providing and fixing in position 15mm C.P. Pillar cock foam flow of approved make (to the approval of Engineer-in-charge)

Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect. (i) C.P.brass 20 mm concealed stop cock with flange

Dismantling, disjointing, removal of G.I. pipe lines, specials, valves and fittings complete in all respects. (i) 20 mm internal diametre pipe line.

Providing, Laying, fixing & jointing of P.V.C. Pipes as per ISI - 4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. (i) 110 mm o/d pipe of 10 Kgf. / sqcm

CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge. (i) SDR 11 CPVC pipes & fittings 20 mm o/d

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled.

Doors of area 3 sqm and below.

Windows of area 3 sqm and below

Clerestory windows of area 3 sqm and below.

Red meranti Normal (15 to 16 kg per cft. Approx.) doors shutter windows shutter including hinges, screw and cords etc. Complete fixed in position. (a) Panelled, glazed or glazed and panelled (i) 35 mm thick

Chowkats of Red meranti Normal (15 to 16 kg per cft. Approx.) confirming to ISI specification no 1003 m kiln seasoned of doors and windows including iron hold fasts, corner straps cleats, stops bolts for hold fasts etc, complete fixed in position (Section 60 mm x 150 mm)

Providing and fixing helical door spring 150 mm (superior quality) including necessary screws, complete in all respect. (i) Iron Helical spring

Providing & fixing 6" stainless steel handles ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge.

Providing and fixing bright finished brass door latch with necessary screws etc. complete : 250 x 16 x 5 mm

Tailoring of curtains.

THE GIDDERBAHA CO OP L and C SOCIETY LTD.