electrification work against Package No. 25/2024-25 sanctioned under Deposit Head in the area of EUDD-II, Aligarh

Amount

Safe carriage of 11 Mtrs. long S.T.Pole from Store Centre, Sarsol to the respective site of work including the work of its loading & unloading at the repective ends.

Safe carriage of line material viz. Conductor, G.I. Earth Wire, Cross Arm, Angle, Channel, Insulators, Clamps & other material from store Centre, Sarsol to the respective site of work including the work of its loading & unloading at the respective ends.

Erection & grouting of 11 Mtrs. ST double pole including fixing complete HT/LT fitting, Fuse set & TPMO as per RESSPO Manual including the cost of labour, T&P and carrier etc. required for proper completion of work. The support shall be grouted with cement, sand & brick ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast etc.

Laying sagging stringing and binding of ACSR Weasel Conductor on the newly erected pole as per RESPO manual and as per direction of supervising engineer, including the cost of arrangement of labour, T&P carrier etc. required for proper completion of work.

Fixing & connecting of earthing rods as per RESSPO Manual including the cost of labour, T&P etc. required for proper completion of work.

Safe carriage of 250 KVA Distribution Transformer from Electricity Store Centre, Aligarh or from any other place to the respective site of work including loading & unloading at the respective ends and polacement on plinth including proper jumpering from 11 KV line to the transformer and also connecting the LT site cables as per RESSPO Manual.

Neutral & body earthing of Distribution Transformer by digging of pit upto water level and then inserting 1-¼” dia GI pipe of ‘A’ grade, conforming to the requirement of IS specification and then connecting the top of the inserted pipe and transformer body through GI strip of size 40x6 mm with the help of nut and bolt or through gas welding, as per direction of supervising engineer. It includes the cost of all material labour, T&P, carrier etc. required for proper completion of work. The aforesaid work shall be carried out as per RESSPO norms.

Fabrication of T-Off Channel as per RESSPO Norms.

Fabrication of Top Channel as per RESSPO Norms.

Fabrication of Dropper Channel as per RESSPO Norms.

Fabrication of F-Clamp as per RESSPO Norms.

M/S JITENDRA KUMAR (BID ID -5017611)

SANJAY ELECTRICALS (BID ID -5017605)