CONSTRUCTION OF PLATFORM FOR ENGINE BOX INSIDE SED, KORAPUT

Earth work in excavation for all kind of soil by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. etc. all complete as per specification and direction of Engineer In Charge.

Demolishing brick work in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

Carriage/removing/disposal of excavated Earth upto 2.00 k.m. by mechanical transport including loading, unloading and stacking where directed etc. all complete as per specification and direction of Engineer In Charge.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing etc. all complete as per direction and specification of Engineer In Charge.

Providing and laying in position cement concrete of 1:3:6 (1 Cement : 3 coarse sand derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) excluding the cost of centering and shuttering all works upto plinth level etc. all complete as per direction of Engineer in charge.

Providing and laying in position reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) up to plinth level excluding the cost of centering, shuttering, finishing and reinforcement - etc. all complete as per specification and direction of Engineer In Charge.

Providing and laying in position reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, roof beams, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) etc. all complete as per direction of Engineer in Charge.

Providing and laying in position Reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement etc. all complete as per direction of Engineer in Charge.

Supplying carrying to site all approved materials and placing in all positions steel reinforcement Thermo-Mechanically Treated bars of grade Fe-500D or more for R.C.C. work including straightening, cutting,bending, placing in position and binding etc. all complete as per specification and direction of Engineer In Charge.

Centering and shuttering foundations, footings, bases of columns, etc. for mass concrete including strutting, propping etc. and removal of form for the same etc. all complete as per direction of Engineer in charge.

Centering and shuttering Lintels, beams, plinth beams, girders, bressumers and cantilevers including strutting, propping etc. and removal of form for the same etc. all complete as per direction of Engineer in charge.

Centering and shuttering Columns, Pillars, Piers, Abutments, Posts and Struts etc. and removal of form for the same etc. all complete as per direction of Engineer in charge.

Supplying and carrying to site all approved materials and providing 15 mm thick inside and outside plastering in CM(1:4) in brick work or concrete or any other surface at any height. The work includes erection of necessary scaffolding including rendering, floating,drip couse,border in chajja finishing the surface even and neat curing etc. all complete as per specification and direction of Engineer-in-charge.

Supplying and carrying to site all approved materials , providing and constructing Brick work with Alumina Refractory Bricks (9 in x 4.5 in x 3 in) in superstructure above plinth level up to floor five level in Refractory castable Mortar as per direction of Engineer in Charge.

Painting with two or more coats synthetic enamel paint on new work of approved brand and manufacture of required colour to give an even shade over an under coat of suitable shade with ordinary paint of approved brand and manufacture including applying priming coats with primer of approved brand and manufacture, having VOC (Volatile Organic Compound ) content less than 50 grams/litre with water thinnable cement primer on wall surface including surface preparation etc. all complete as per direction of Engineer in Charge.

Sub Total Works Amount

I / We hereby quote percentage above (+) or below (-) the Estimated cost

Sub Total Works Amount

ADD GST @ 18% (( IGST18%) or (CGST @ 9% +SGST@ 9%)), Whichever is applicable

GRAND TOTAL

Note : (i) : It is a percentage rate tender. Hence the tenderers are required to quote rates on percentage basis i.e. above or below the estimated cost put to tender. (ii) The quoted rates in the bill of quantities are inclusive of all types of taxes, duties levies, fees and charges etc., imposed by Central/ State Govt. and local bodies Compensation Cess, Labour Cess, Custom Duty, royalties and other levies. It shall also include all other costs including loading, un-loading, insurance, transportation, testing and Certification expenses except GST . GST at the prevailing percentage is added in the BOQ at the end.

GOODS AND SERVICE TAX (GST)

Bidder should indicate GSTIN No. (Copy of GST registration to be enclosed) and PAN No. (copy of PAN to be enclosed).

Tender will be considered/ accepted, if & only if the vendor has a valid GST Registration No

Central Tax/ State Tax/ Integrated Tax/ Union Territory tax to be quoted as per GST Law

Bidders to ensure correct applicability of Central Tax/ State Tax/ Integrated Tax/ Union Territory tax based on the Inter / Intra state movement Supply of goods and provision services or both

Bidder shall mention the SAC Code/HSN Code for goods and services in accordance with GST law in their Bid and subsequently in their tax invoice. HAL, Koraput Division shall not be responsible for any error in SAC Code/HSN Code for goods and/or services specified by supplier/contractor

The Tax Invoice for supply of Goods & Services should be raised as per the provision of GST Act & Rules and must compulsorily mention the following-

a. HAL, Korpaut Division GST registration number as 21AAACH3641R1ZJ

b. Name & address of supplier / Vendor/ Contractors

c. GSTIN of Supplier / vendors / Contractors

d. Consecutive Serial Number & date of issue

e. Description of goods or services

f. Total value of supply

g. Taxable value of supply

h. Tax Rate – Central Tax & State Tax or Integrated Tax, Cess

i. Amount of Tax charged

j. Place of supply

k. Address of delivery if different from place of supply

l. Signature of authorized signatory

Reimbursement of GST to the vendor is contingent upon complying with the following condition by the service provider

i. Uploading the (invoices raised on HAL, KoraputDivision ) onward GST Return (GSTR-1) in GSTN Network portal within the statutory time period

ii. Discharging the GST tax liability to the Government.

iii. Submission of Tax Invoice to HAL, Korpaut Division.

iv. Submission of proof of payment of GST to HAL, Korpaut Division.

v. Receipt of goods / services by HAL Koraput Division.

vi. Availment of Input Tax Credit by HAL, Korpaut Division .

In case GST credit is delayed/ denied to HAL, Korpaut Division, due to non/delayed receipt of goods and/or services and/or tax invoice or expiry of timeline prescribed in GST Law for availing such ITC, or any other reason not attributable to HAL, Korpaut Division, GST amount shall be recoverable from Vendor along with interest & penalty levied/ leviable on HAL, Korpaut Division, as the case may be

In case vendor delays declaring such invoice in his return and GST credit availed by HAL, Korpaut Division is denied or reversed subsequently as per GST law, GST amount paid by HAL, Korpaut Division towards such ITC reversal as per GST law shall be recoverable from vendor/contractor along with interest & penalty levied/ leviable on HAL, Korpaut Division.

In case of discrepancy in the data uploaded by supplier in the GSTN portal or in case of any incomplete work/service, then HAL, Korpaut Division will not be able to avail the tax credit and will notify the supplier of the same. Supplier has to rectify the data discrepancy in the GSTN portal or issue credit note (details to be uploaded in GSTN portal).

For any such delay in availing of tax credit for reasons attributable to vendor (as mentioned above), interest as per the GST Act & Rules, along with penalty, if any will be deducted for the delayed period i.e. from the month of receipt till the month tax credit is availed, from the running bills.

Penalty amount so determined along with GST if applicable thereon shall be recovered from the contractor.

Any reduction in rate of Tax on any supply of goods or services or the benefit of input tax credit shall be passed on to the recipient by way of commensurate reduction in prices. Bidders have to submit declaration in their bid that they have complied with ‘Anti-profiteering clause’ under GST law.

The bidder’s quoted rates/ price should be after considering the Input Credit under GST law at their end, since GST on output (GST amount charged in Invoice) will be paid by HAL.

In case any changes in taxes and duties as per Gov. Notification (including GST), the same shall be applicable from time to time.

Quarters will be allotted to the awarded agency subject to availability & recommendation from the E-I-C/ O-I-C for which rents as applicable will be recovered from the running bills of the agency.