NIT NO:22/PWD/Zone-2/2026 RAIPUR DATED: 17/08/2026

OFFICE OF THE MUNICIPAL CORPORATION RAIPUR (C.G.)

Zone No- 02 (BOQ)

Name of the work - lkeqnkf;d Hkou fuekZ.k&iapoVh xkMZu lsDVj 05 gsew dkY;k.kh okMZ uxj fuxe jk;iqj esaA

Bill of Quantity for works

Note: Rates as per PWD, SOR (Building Works) 15-04-2026

S.N PARTICULAR’S QUANTITY RATE UNIT AMOUNT

1 Demolishing cement concrete including disposal of material within 50 metre lead..,Item No.16.43.2 1:3:6 or richer mix

2 Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material within 50 metre lead..,Item No.16.42

3 Earth work in Excavation

Excavation for all types and sizes of foundation, trenches and drains or for any other purpos including disposal of excavated stuff upto 1.5 m lift and upto 50 m (at least 5m away from the excavated area), including dressing and leveling of pits.,Item No.1.1.1(i)In all types of soil

4 P.C.C. Base Conc.

Providing and laying nominal mix cement concrete with crushed stone aggregate using concrete mixer in foundation,plinth and at ground level excluding cost of form work.,Item No.3.1.2 (ii)1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size).

(iii)1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 40mm nominal size).Page No.23,Item No.3.1.3 (iii)

Providing and laying nominal mix reinforcement cement concrete with crushed stone aggregate using concrete mixer in all work upto floor five level excluding cost of reinforcement and form work.Page No.23,Item No.3.2.1 (ii)1:1½:3 (1 cement : 1½ coarse sand :3 graded stone aggregate 20mm nominal size).

Providing and placing in position reinforcement for R.C.C work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire all complete:.Page No.24,Item No.3.12.1 (i)Thermo- Mechanically treated bars

7 Centering & Shuttering

(a) Providing and fixing formwork ncluding,shuttering,strutting,staging, propping bracng etc. complete and including its removal at levels, for: Page No.16,Item No.2.1.1 (i)Foundation, footings, bass of columns and plinth beam in any. Shape and size

b (v) Columns,pillars Piers and likes-rectagular or square in shape 92.48 288 sqm 26634.24

(c) (ix) Beams,lintels,cantillevers & walls 124.28 196.00 Sqm 24358.88

(d) (viii) Suspended floors,roofs,access platform,balconies (plain surfaces ) and shelves (cast in stu)

(a) Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: Page No.45, Item No.7.5.4 (i) Cement Mortar 1:6(1 Cement : 6 Coarse Sand)

9 Half brick thick brick masonry with modular well-burnt clay bricks of crushing strength not less than 25 kg/sqcm and water absorption not more than 20% in superstructure above plinth level upto floor five level.Page No.45, Item No.7.11.1 (ii) Cement Mortar 1:4 (1Cement :4 coarse sand )

10 Plastering work

12 mm thick cement plaster of mix: Page No.103,Item No.11.2.4 (iv) In Cement mortar 1:6 (1 Cement :6 fine sand)

11 15 mm thick cement plaster on the rough of side of single or half brick wall of mix: Page No.103,Item No.11.3.4 (iv) In Cement mortar 1:6 (1 Cement :6 fine sand)

12 6 mm thick cement plaster of mix:Page No.103,Item No.11.1.1 (i)In Cement mortar 1:3 (1 Cement :3 fine sand)

13 Providing wood work in frames of doors, windows, clearestory windows and other frames wrought framed and fixed in position.b) Sal, bijasal, benteak, khair, haldu Item No.8.1.2

14 Providing and fixing flush door shutters,confirming to IS 2202 (Part -1) interior grade, commercial type, core of block board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains, cross bands and face veneers on both faces of shutters excluding hinges ,Item No.8.14.2 (ii)35 mm thick(single leaf)

(a) Single leaf D2 2.10 1598.00 Sqm. 3355.80

(a) Double leaf D2 6.30 1740.00 Sqm. 10962.00

15 Providing and fixing bright finished brass sliding door bolt with nuts and brass polished MS screws complete: Item No.8.60.2 (ii)250x16 mm

16 Providing and fiixing bright finished brass tower bolts(barrel type) with brass polished MS screws complete:Item No.8.62.3 (iii)150x10 mm

17 Providing and fixing bright finished brass door handles with brass polished MS screws complete: Item No.8.65.2 (ii)100 mm

18 Glazed window

Providing and fixing factory made ISI marks steel doors, windows and ventilators side/top/center hung made up of standard rolled steel section conforming to IS 1038:1968 and IS 1977:1969 joints mitred and flash butt and sash bars tenoned and riveted/weded with 10 cm long lugs of size 15x3mm embedded in cement concrete block 15x10x10 cms of 1:3:6(1 cement :3 rawl plugs and screws or with bolts and nuts as required including providing and fixing of hinges, pivots, handles, pags, stays rolling deviced, locking arrangemnts, spring catch etc. as required complete including applying a priming coat of red oxide zinc chormate primer. page No. 81 item No. 9.17

19 Providing and fixing 3 mm fibre glass pane with steel glazing clips and special metal sash uptty of approve make in steel doors, widiows, ventilators.PageNo.82, ItemNo.9.22

75% of window area 6.21 625.00 Sqm. 3881.25

20 Providing and fixing 30mm thick factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded PVC 'C' channel of size 30mm thickness, Both side Pre-laminated panel PVC door shutter No.8.152.2

Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat of red oxide zinc chromate primer. ItemNo. 9.15 with frame

Preparation of wall surface by applying a cost of putty comprising of chalk mitti, varnish and white lead in ratio 2½:1:1(2½ kg chalk mitti:1 litre varnish : 1 kg white lead) respectively, sand papering and making the surface smooth to proper shape and presentable conditions. Item No.14.4

23 Distempering

Providing and applying Synthatic oil bound washable Distemper having VOC content less than 50gms/ lit. Minimum two coats up to final finish to give an even shade applied 1.25 kg / 10Sqm as per relevant I.S. Code 428:2000 (product such as Asian Tractor synthatic distemper , Berger Bison Lite , Dulux Magik , Birla Opus Style super smart) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work. Item No.14.61

24 Exterior Paint

Providing and applying on exterior surface with PREMIUM Exterior emulsion paint of required shade to give protective and water proof finish minimum 3 coats applied @ 1.40 lit / 10Sqm up to final finish as per relevant I.S. Code 15489:2013 Type -2 Class D , C (Glossy /Semi Glossy finish ) (Product such as Asian Apex , Dulux Weather Shield Prima E900 , Berger Weathercoat Antidust , Nerolac Everlas Excel , Nippon Sumo Etra, Opus True flex) inclusive of providing abro tape on edges and articleand cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work.(With 3Year Warranty.) Item No.14.68

25 mm thick KOTA stone slab flooring over 20 mm (Average ) thick base of cement mortar 1:4 laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding rubbing and polishing etc. compete (Area of slab to be 0.20 sq.m and up to 0.50 sq.m) PageNo.118, ItemNo.12.49 25mm thick

26 White/Coloured glazed tiles

Providing and fixing ceramic glazed wall tiles conforming to Is :15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white mixed with matching pigment complete.Item No.12.7.2 size above 200 x300

25 mm thick KOTA stone slab flooring over 20 mm (Average ) thick base of cement mortar 1:4 laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding rubbing and polishing etc. compete (Area of slab to be 0.20 sq.m and up to 0.50 sq.m) ItemNo.12.49

28 Painting onnew work (two or more coats) to give an even shade with:Page No.134,Item No.14.22.2(ii)Premium synthetic enamel paint

Total 736861.94

Add 15% for electrification water supply & Sanitation 110529.29 152530.422

a Total amount 847391.23

Add 18% GST/VAT 152530.42

Grand Total 999921.65