Construction of New Bus Stand at Haripur Dehra, Distt- Kangra (HP)

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. (One point five Squre millimeter) PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. (One point five Squre millimeter) HRFRLS/PVC insulated single core copper conductor cable as required. Group C. including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

Wiring for power plug with 2x4 Sq. mm. (Two into four Squre millimeter)PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.4 Sq.mm. (four Squre millimeter) HRFRLS/PVC insulated single core copper conductor cable for earthing as required. including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

Wiring for power plug with 4x4 Sq. mm. (Four into four Squre millimeter) PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.4 Sq.mm. (four Squre millimeter) HRFRLS/PVC insulated single core copper conductor cable for earthing as required. including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. 2x1.5 Sq. mm. (Two into One point five Squre millimeter) including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. 2x6.0 Sq. mm. (Two into six point zero Squre millimeter) including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. 2x10 Sq. mm. (Two into ten Squre millimeter) including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. 2x16 Sq. mm. (Two into sixteen Squre millimeter) including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

Supplying and fixing stepped type Modular fan regulator on the existing modular box including making connections etc. as required including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) (One hundred forty into seventy eight into fifty millimeter) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps,modular switch, connections etc. as required. including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) (One hundred forty into seventy eight into fifty millimeter) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required. including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

Supplying and fixing sheet metal bus-bar chamber suitable for 100 Amp. 415 volts capacity with 4 No. copper strip bus-bars Each of length 300mm (Three hundred millimeter) & cross-sectional area(25.4mmx3.17mm), (Twenty five point four into three point seventeen millimeter) enclosure made from 1.6 mm (One point six millimeter) thick M.S. sheet having overall dimensions 80mmx400mmx150mm) (Eighty into four hundred into one hundred fifty millimeter) nominal with all accessories including connections, earthing the body etc. as required:- including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

Supplying and fixing sheet metal bus-bar chamber suitable for 200 Amp. 415 volts capacity with 4 No. copper strip bus-bars Each of length 300mm (Three hundred millimeter) & cross-sectional area (25.4mmx4.75mm), (Twenty five point four into four point seventy five millimeter) enclosure made from 1.6 mm (one point six millimeter) thick M.S. sheet having overall dimensions 80mmx450mmx150mm) (Eighty into four hundred fifty into one hundred fifty millimeter) nominal with all accessories including connections, earthing the body etc. as required:- including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- Single pole. Cat-A. including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- Double pole. Cat-A. including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 Amps. Cat-A. including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 Amps. Cat-A. including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:- Double door-4 way including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:- Double door-6 way including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:- Double door-8 way including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:- Double door-12 way including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

Earthing with copper earth plate 600 mmx600 mmx 3 mm (Six hundred into six hundred into three millimeter) thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required. including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required. including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

Supplying and laying 8 SWG Copper wire at 0.50 mtr. (Zero point fifty meter) Below ground level for earth electrode conductor, including soldering etc. as required. including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the required size:- Armoured cable 6 sq. mm (Six squre millimeter) (twin core) including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the required size:- Armoured cable 70 sq. mm (Seventy squre millimeter) (3.5 core) including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:- Armoured cable 35 sq. mm (Thirty five squre millimeter) (3.5 core) including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:- Armoured cable 70 sq. mm (Seventy squre millimeter) (3.5 core) including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm (Thirty centimeter)) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:- Ceiling Fan 1200 mm (One thousand two hundred millimeter) sweep, Category-A including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm (Thirty centimeter)) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:- Ceiling Fan 1400 mm (One thousand four hundred millimeter) sweep, Category-A including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:- Exhaust Fan, Heavy duty, 300 mm (Three hundred millimeter) sweep including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

Supplying and erection of 3 stepped steel tubular swaged and welded pole of suitable length and dia. to be fixed up to a required planting depth below G/L in a hole of excavation about 30 cm (Thirty centimeter) dia. and of suitable depth, to be filled in up to 15 cm (Fifteen centimeter) below G/L with 1:3:6 (One cement: Three sand: Six graded stone aggregate) cement concrete and there above plinth with 1:2:4 (One cement: Two sand: four graded stone aggregate) cement concrete up to a height of 45 cm (Forty five centimeter) from G/L. The radial thickness of the plinth above G/L should not be less than 6.35 cm (Six into thirty five centimeter) and sufficient to completely flush a 180 mmx100 mmx 45 mm (One hundred eighty into one hundred into forty five millimeter) deep, glass filled Nylan F.R. grade box for housing a 16 Amp. MCB, the outer surface of the plinth to be finished with 1:3 (One cement: Three sand) plaster 6 mm (Six millimeter) thick, the fuse-box shall have a water tight cover, including painting of pole with two coats of approved color, brand and manufacture of paint over a priming coat complete in all respects as required:- (b). Overall length 8 meter, (Eight meter) with planting depth 1.5 m, (One point five meter) length of sections 4.5 m, (Four point five meter) 1.75m (One point Seventy five meter) and 1.75m (One point Seventy five meter) (bottom, middle and top respectively), outer dia and thickness of sections 127mm x 4.5mm, 101.6mm x 3.65mm (One hundred twenty seven into four point five into one hundred one point six into three point sixty five millimeter) and 76.1mmx3.25mm (Seventy six point one into three point twenty five millimeter) (bottom, middle and top respectively) with approximate weight 84 Kg. (Eighty Kilo-garam) including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

Supplying and erection of street light bracket made of G.I. pipe 'A' class of suitable length and dia, the pipe bended to give an angle of 100 to 110 degree fitted with bolt & nuts at the top of existing pole or wall including painting the pipe with two coats of approved paint over priming coat complete in all respects as required:- 40 mm (Forty millimeter) dia. G.I. pipe, heavy class including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

supply and fixing of LED Bulk head 10 watt fitting with all accessories including connection testing as requred. As approved by the Engineer in-charge of great white or its equivalent make. including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

Providing and fixing of LED street light with pressure die cast housing with individual LEDs light source and lens embedded PC cover having top opning sepret driver compartment with IP66 protaction and impect resistance LED 45W of Bajaj or its equivelent make. including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

Supply and fixing of fancy wall (containing LED Lamp Holder of all type and shaps complete with all accessories but excludind LED Lamp including making connections testing etc. As requred .havells make or its equivalent make. including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

Providing and installation of LED batten commircial type with aluminium housing and integrated electronic driver 50Hz 220/240volt connection testing etc. As requred of havells make or its equivalent make. 20W 1200mm. (One thousand two hundred millimeter) including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

Providing and fixing of LED surface mounted LED flate pennel 1' x 1' 22 to 30watt of CRCA sheet duly powder coted with high efficient LEDS & glare freefull opal diffuiser IP 20 luminair complete with connection testing and commissioning extra as required complete in all respect per entire setisefection of the Engineer in charge. Make : Wipro/ Phlips/ Bajaj/ Twinkle/Syska. or its equivalent make. including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

Providing and fixing of LED surface mounted LED flate pennel 2' x 2' 36 watt of CRCA sheet duly powder coted with high efficient LEDS & glare freefull opal diffuiser IP 20 luminair complete with connection testing and commissioning extra as required complete in all respect per entire setisefection of the Engineer in charge. Make : Wipro/ Phlips/ Bajaj/ Twinkle/Syska. including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

supplying and fixing of encloser for 100amp MCCB 3 pole as per C&S price list Wef. 1st July 2017 including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

Supplying installation testing & commisioning of Energy Meter Box complete with 4 pole MCCB 100 Amp, Coopper busbar 100Amp, metering with Amperemeter, Voltmeter. Indicator & space for housing 10 No singal phase energy meter as required capable in all respects and MCCB DP for Each energy meter. including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

Supplying installation testing & commisioning of 4 pole MCCB 200 Amp, Coopper busbar 200Amp, metering with Amperemeter, Voltmeter.Indicator as required capable in all respects. including all leads and lifts and carriage of materials and complete as per entire satisfaction of the Engineer-In-Charge.

SUKH DEV SONI CONT

Jagjit Rai

JAMWAL ELECTRICAL WORKS

ASHOK KUMAR GOVT CONTRACTOR

Kumar Enterprises