REPAIR, MAINT OF CERTAIN BR WORKS OF OTM ACCN OF 536 ASC BN, ROU, MANDIR MARG, V.K LINE, 336 FIELD HOSPITAL, 56 ENGR REGT, 636 EME, PRO UNIT, ETC. UNDER GE SAUGOR..

Amount

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Dismantling of floor, hearth or wall tiles / terrazo including cement mortar bedding (but not backing),removal servicable tiles to store and rubbish off the premises complete all as specified and directed

Demolition of cement concrete in ground floors and pavings not exc 15cm below or above ground floor complete all as specified and directed.

Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed

Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.5 Sqm but not exc 4 Sqm each complete all as specified and directed .

Taking down shutters of any description not exc 1 Sqm each complete all as specified and directed

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion & making good disturbed ground embedded in Concrete, brick work, masonry, etc., complete all as specified and directed

M&L for PCC 1:2:4, type B2 (using 40mm graded stone aggregates) as in foundations, filling and mass concrete complete all as specified and directed

M&L for brickwork with subclass 'B' bricks, straright or corved on plan exc 6m mean radius built in cement mortar 1:6 including demolition of brick work with all qoins arches, pillars etc built in cement mortar complete all as specified and directed.

M&L for stone walling of random rubble, uncoursed well bonded, bedded and solidly hearted built in cement -mortor 1:6 including demolition of rubbled stone masonry with all qoins arches , pillars etc built in cement mortar complete all as specified and directed.

M&L for cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, in cement mortor 1:3 cutting not exceeding 10cm girth complete all as specified and directed.

S&F mild steel TMT bars 10mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed.

S&F mild steel TMT bars 6mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed

M&L for precast reinforced cement concrete 1:2:4, type B1 (using 20mm graded stone aggregates) set in CM(1:4) in landings,kitchen platform, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including demolition of RCC in precast cover slab any thickness (reinforced) complete all as specified and directed.

M&L for providing precast cement concrete louvers and jallies 35 mm thick, ype B-0, 1:2:4 (using12.5 mm graded stone aggregates) set in cement mortar (1:4), (Measured solid), including all mouldings including dismantling of existing jallies of any description complete all as specified and directed.

M&L for non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles laid over and including 15mm thick screed bed or beding layer in cement mortar (1:6) complete all as specified and directed

M&L for coloured anti skid ceremic tiles 7 to 8 mm thick area of each tiles exc. 0.11 sqm and not exc. 0.18 sqm (size 400mm x 400 mm joint free (rectified) ) as in floor set & jointed in neat cement slurry and pointed in white /coloured cement to match tiles laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed

All as per Srl item No. 18 above but in dado / skirting laid over and including 10 mm thick rendering in CM (1:4) -ditto-

M&L for glazed ceramic tiles of size 600mmx 300mmx 7mm thick,(joint free (rectified)) coloured, on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed in white/ coloured cement to match tiles laid over and including 15 mm thick rendering in CM 1:4 complete all as specified and directed .

M&L for 600mm x 600mmx 8mm to10 mm thick coloured vitrified tiles as in floors set & jointed in neat cement slurry and pointed in white /coloured cement to match the tiles laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

All as perSrl item No. 21 above but in dado / skirting laid over and including 10 mm thick rendering in CM (1:4) -ditto-

M&L for mirror polished machine cut Kota stone slab flooring 18mm to 20mm thick laid over and including 15mm thick screed in CM(1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed

M&L for Kota stone slab 12mm to 15mm thick in skirting laid over and including 15mm thick plater in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed

M&L for 16mm to18mm thick Granite of any shade ( table rubbed and polished ) in steps, jambs, pillars, windowcills, cooking plateforms and like in cement mortor 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match shade of the slabs complete all as specified and directed

M&L for rounding/ chamferring to edges of stone slabss one edge , such as in steps , cooking plateform and other similar situations complete all as specified and directed

M&L for coloured designer tiles exterior grade ( ENDURA or equivalent ) 10 mm thick over and including 15 mm thick cement mortor 1:6 set and jointed in floor and pointed in neat cement slurry with grey cement and pigment complete all as specified and directed

M&L for machine pressed precast concrete interlocking paver block glossy finished chemically treated any shape and size confirming to IS-15658-2006 size of 60 mm thickness, M-35 Grade with grey cement and pigment laid over and including 30mm to 50mm stone dust cushioning including demolition of stone set paving of any description or thickness laid, bedded and pointed in any mortar complete all as specified and directed.

M&L for 40 mm thick PCC type B-0, (1:2:4) (using 12.5mm graded stone aggregates) surface finished even & smooth using extra cement complete all as specified and directed

S&F Glass dividing strips, 3mm thick & inserted in position to conform to design width of strip 38 mm complete all as specified and directed

M&L for cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregates) as in plinth protection 75mm thick finishing cement concrete surfaces even & smooth without using extra cement including filling of construction joint with bitumenous sealing compound complete all as specified and directed

M&L for 25 mm thick PCC (1:2:4), type B1 (using 20mm graded stone aggregates) as in sub base of floor to receive tiles or Kota stone complete all as specified and directed

M&L for plain cement concrete type D-2, 1:3:6 (using 20mm graded stone aggregates) as in sub base complete all as specified and directed

M&L for plain cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed

M&L for rendering 20mm thick cement plaster in cement mortar 1:6 on stone masonary / other than fair finished surfaces of brick wall finishing the surfaces even and smooth without using extra cement complete all as specified and directed

M&L for rendering 15mm thick cement plaster on wall in cement mortar 1:6 on brick wall / concrete surfaces of finishing the surfaces even and smooth without using extra cement complete all as specified and directed

M&L for rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:4) including water proofing compound @ 2% by wt of cement complete all as specified and directed. Note:-WPC shall be measured and paid separately

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling complete all as specified and directed

M&L for cement concrete 1:2:4, type B0 ( using 12.5 mm graded stone aggregates) as in coping , apex stone , bed plate , kerbs including weathering , slightly rounded or chamferred angles and throating and including necessary form work complete all as specified and directed

M&L for preparing the new plastered surfaces and applying three coats of white wash on walls complete all as specified and directed

M&L for applying three coats of white wash on new ceiling surface including preparation of surface complete all as specified and directed.

M&L for applying two coats of Acrylic Distemper, white or tinted on new wall surface including preparation of surface complete all as specified and directed.

M&L for applying two coats of Acrylic Distemper, white or tinted on old wall surface including preparation of surface complete all as specified and directed.

M&L for applying two coats of exterior emulsion anti fungal paint ACE or equivalent on newly platered surface of walls incl preparation of surfaces with one coat of primer complete all as specified and directed

S&F GI ( cold rolled) snap grid size of 600mm x 600 mm frame work of 24 x 38 x 0.60 mm, Tee Section ( bottom pre coated ) and 24 x 24 x 0.5 mm thick angle rung along the wall incl GI suspenders wire as per manufacturer instruction as in ceiling with and incl S & F coloured Non Asbestos designer ceiling cement boards 4 mm thick including dismantling textile coverings including frames (if any) & cover fillets in ceilings (measured flat & not girthed) complete all as specified and directed

M&L for gypsum boards in suspended system ceiling as in flat or vertical step up or down pattern (GS-MFSC-4.1) including GI perimeter channel of size 0.55 mm thick (having one flange of 20 mm and another flange of 30 mm and a web of 27 mm ) along with perimeter of ceiling, screw fixed to brick wall with partition with the help of nylon sleeves and screws at 610 mm centre to centre. Then suspending GI intermediate channel of size 45 mm (0.9 mm thick with two flanges of 15 mm each) from the soffits ot 1220 mm centres with ceiling angle of width 25 mm x 10 mm x 0.55 mm fixed to soffits with GI cleat and steel expansion fasteners. Ceiling section of 0.5 mm thickness having knurled web of 51.5 mm and two flanges of 26 mm each with lips of 10. 5 mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457 mm centres to centres, 12.5 mm tapered edge gypsum boards (conforming to IS 2095 –1982) is then screw fixed to ceiling section with 25 mm dry wall screws at 230 mm centres to centres.Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. The board are to be jointed and finished the tapered and square edges of the board with jointing compound, joint paper tape and applying two coats synthetic distemper over a coat of primer suitable for Gypsum board complete including dismantling textile coverings including frames (if any) & cover fillets in ceilings (measured flat & not girthed) complete all as specified and directed

M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs fixed with L-type or J-type or cranked hook bolts including dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

Taking down and refixing Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed..

S&F 6mm thick asbestos cement serrated ridge or hip ridge for corugated or semi corugated sheets, fixed with L-type or J-type or cranked hook bolts including dismantling existing damaged AC sheet ridge/hip for corrugated or semi corrugated sheets from roof complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick, trapozoidal pattern with guard film of any colour having tensile strength of 550 Mpa as in roof covering/cladding in wall, fixed with self tapping screws including dismantling old plain or corrugated GI sheeting, any gauge, thickness complete all as specified and directed.

M&L for second class hardwood in scantlings, timber clean sawn framed and fixed including dismantling unframed timber scantlings 40 sqcm & over in section, in any position complete all as specified and directed.

M&L for preparing surfaces of wood & wood based materials, new or old, of any description & girth, not otherwise described & treated with one coat of cresote complete all as specified and directed..

M&L for second class hardwood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

M&L for second class hardwood clean sawn straight scantling area exc. 13 but not exc 25 sqcm each for fixing to existing chowkats with nails complete all as specified and directed

S&F 105 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of red oxide primer including cutting holes and making good in P:C:C 1.2.4 type B-1 (using 20 mm graded stone aggregates) and M&L PCC 1:3:6 type C-0 (using 12.5 mm graded store aggregates) for filling in pressed steel frame complete all as specified and as directed

All as per Srl item No. 55 above but size 125mm x60mm -ditto-

S&F mild steel door shutter with MS angle iron shutters frame 35 mm X 35 mm X 5 mm in two panel covered with 1.25 mm thick MS plain black sheet welded to shutter with 2 Nos sliding door bolt of 16 mm dia 300 mm long with locking arrangement, 2 Nos of tower bolt of 200 mm longincluding MS angle iron frame 40mm x40mmx 5mm as in chowkhat with 6 Nos hold fast of flat iron 30mm X5 mm ,200 mm long with bottom flat iron of size 30mmx5mm and 100 mm size 4 Nos butt hinges including necessary cutting, welding, binding as required with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces complete all as specified and as directed. [Single shutters of approx width0.8 to 1.2 m and ht 1.9 to 2.10 M.]

S&F steel window with side hung shutters with glazing bars devetailed or welded, fixed on and including pressed steel frame of size 80mm x 40mm x 1.25mm thick CRCA profile section with box type hinges, steel handle, steel peg stay etc complete all as specified and directed.

S&F steel window with side hung shutters without glazing bars devetailed or welded, fixed on and including pressed steel frame of size 80mm x 40mm x 1.25mm thick CRCA profile section with box type hinges, steel handle, steel peg stay etc complete all as specified and directed.

S&F fixed type ventilators aluminium powder coated of frame size 50.80X 25.40mm,1.5 mm thick half portion will be fixed with 4mm thick frosted glass and half portion will be fixed with louvers with 4mm thick frosted glass with rubber gasket and aluminium beading ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as directed by Engr-in- Charge (Al. section thickness 1.50 mm }

S& F glazed (5.0 mm thick plain / coloured glass) aluminum door powder coated consisting of frame of 63.50 mm x 38.10 x 1.95 mm size with shutter fixed on frame both side open able on pivotal arrangement with including necessary cutting holes in wall & floor, Door shutter consists of top and bottom rail size is 83 x 44.45x 2mm mm , & lock rail size is 100 x 44.45x 2mm mm & style of door shutter is 85mmx 44.45 x 2mm mm with handles 2 Nos in each door , hinges has fitted on frame as required fixed with rubber gasket & aluminum beading any No of panels with aluminum handle , locking arrangemen,floor door stopper incl. necessary joining cleats , glazing clips and floor springs etc complete, confirming to IS

S&F aluminium windows sliding type three track powder coated consisting of frame bottom with gutter of size min 92.34 X 39 mm,sideand top of size min 92.34X29.70, shutters vertical 39X20 mm,shutter top &bottom of size min 20X39 mm ,shutter interlock min size 39X20 mm with rollers and conceled locking arrangements with 4 mm thick tinted glass with rubber gasket,brush and aluminium beading , ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia etc including necessary cutting holes on wall and floor and confirming to IS complete all as directed by Engr-in- Charge (Al. section thickness 1.50 mm }

S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood facepanels, commercial type on both sides, complete all as specified and directed(with double or single shutter complete all as specified and directed.

S&F second class hardwood factory made glazed and skeleton shutters 35 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, cla-use 8.24 (a); for doors supplied and fitted to chowkats complete all as specified and directed.

S&F second class hardwood factory made 30mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc (with sash bars any numbers), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, for windows and ventilator all as per SSR Part-I clause 8.24 (b) complete all as specified and directed

S&F 30mm thick second class hardwood factory made glazed and skeleton shutters , open rebated and prepared to receive glass, guaze, etc.(without sash bars), edges of framing plain chamfered or rounded fitted with cut and metered beads for securing glass etc . size of members of shutters as specified in SSR-I , section-8, clause-8.24(b) for windows and ventilator complete all as specified and directed.

S&F Solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with prelam sheet) reinforced with MS square tube complete all as specified and directed

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm prelam PVC sheet on back face complete all as specified and directed

S&F galvanised mild steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F in repairs galvanised mild steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F second class hardwood beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

M&L for preparation of new wooden surfaces of any description not exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide priner complete all as specified and directed

S&F mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed, length of bolt 200 mm complete all as specified and directed.

S&F mild steel barrel tower blots 100mm long, stove enamelled black with bright bolt complete all as specified and directed

S&F Aluminium handles 150mm size, cast type, anodised complete all as specified and directed

S&F mild steel pressed handles,150mm oval type, stove enamelled black complete all as specified and directed

S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section complete all as specified and directed.

S&F mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, length of bolt 300 mm complete all as specified and directed.

S&F Butt hinges of 100 mm size, medium weight, cold rolled mild steel and fixed complete all as specified and directed.

S&F Butt hinges of 100mm size extruded aluminium aloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed

S&F 75mm size butt hinges medium weught , cold rolled MS and fixed complete all as specified and directed.

S&F door stopper of aluminium alloy body and tongue 150 mm long , anodised fixed in door with screws complete all as specified and directed

S&F 300mm size, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

M&L for PCC 1:3:6, type C-1 (using 20mm graded stone aggregates) as in filling of hold fast complete all as specified and directed.

Cutting holes in brick walls in cement mortar or cement lime mortar and stone wall built in lime mortar for inserting holdfasts in exc. One brick but not exc. two brick wall and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required complete all as specified and directed

M&L for preparing surface of wood & wood based materials, steel & iron work, new or old, of any description & girth, not otherwise described & treated with tar or coal tar black paint complete all as specified and directed.

All as per Srl item No 88 as above but treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc area not exc 0.1 sqm each.

S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples, chains, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters;and similar small articles conforming to Fe 290 Gde E 165 complete all as specified and directed.

S&F framed work such as grills gratings, sunshed cover fixed with nut bolts incl,cutting drilling holes etc., with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed baluster, walk ways, railings, framedwork or water tanks and similar work conforming to Fe 290 Gde E 165 complete all as specified and directed.

S&F mild steel for wind ties for roof including securing bolts, posts including all necessary drilling, bolting or riveting, etc & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed

S&F steel work in tubular trusses or post, perline and rafters, etc using tubes, pipes, hollow section complete all as specified and directed

Hacking out old broken glass (any tickness, size,quality or description) from wooden / steel framesglazed with oil putty or fixed with beads complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and directed.

S&F 3 mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed.

S&F in repairs 110mm bore PVC(SWR) pipes single soketed in any length with rubber ring jointed fixed to wall including mild steel clamps complete all as specified and directed

S&F in repairs PVC (SWR) bends 110 mm dia complete all as specified and directed

S&F in repairs PVC (SWR) 110 mm dia junction, single(single 'T') equal or unequal complete all as specified and directed .

S&F in repair PVC(SWR) vent cowl of 110mm dia complete all as specified and directed

S&F in repairs PVC (SWR) pipes 75mm bore single socketed, in any length with solvent joints laid in trenches or in floors complete all as specified and directed.

S&F in repairs PVC (SWR) bends 75mm dia complete all as specified and directed

S&F in repair PVC(SWR) vent cowl of 75mm dia complete all as specified and directed

S&F in repairs for 75 mm dia PVC ( SWR) floor trap with grating including jointing with solvent complete all as specified and directed

S&F in repairs 25 mm dia aluminium powder coated droppery rod including brackets complete all as specified and directed

S&F GI tubing 15mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down 15mm bore GI tubing and connections complete all as specified and directed

Taking down and re-fixing 15mm bore GI tubing and connection in new or old position ( wall, floor, wall, etc., ) complete all as specified and directed.

S&F GI tubing 20mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down 20mm bore GI tubing and connections complete all as specified and directed

Taking down and re-fixing 20mm bore GI tubing and connection in new or old position ( wall, floor, wall, etc., ) complete all as specified and directed.

Cutting existing steel tubing for alterations or additions (Each cut measured) 15 /20 mm pipe complete all as specified and directed.

Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) 15 /20 mm bore pipe complete all as specified and directed..

S&F in repair PVC float valve assembly including assessories with float valve 20mm dia complete all as specified and directed.

S&F in repair soap dish brass chromium plated fixed to wall with brass chromium plated screw and wooden/ plastic plug complete all as specified and directed.

S&F in repair C P bib taps, cast copper alloy fancy conceled type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.

S&F in repair angular stop valve , 15mm dia, cast copper alloy,CP fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed.

S&F in repair bib tap standard of PTMT any colour high pressure screwed for iron pipe of 15 mm bore and fixed (Minimum weight 15mm 90gm) complete all as specified and directed.

S&F in repair pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore complete all as specified and directed.

S&F in repairs PTMT PVC grating of 100 mm dia complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repair vitreous China WHB white flat back size 550x400mm including S&F angle iron brackets, C.P pillar tap fency type 01 No 15mm bore, CP waste coupling, 32mm dia and PVC waste pipe 32mm dia and PVC connection 450mm long high pressure complete all as specified & directed.

S&F in repair vitreous China squatting pan 'Orrisa pattern' size 580x440mm white with integral foot rests any pattern including provn of cement concrete bedding and making connection with & including 'P' or 'S' trap, etc complete all as specified and directed.

S&F in repair vitreous China wash down water closet pan (pedestal pattern), white including white seat cover complete all as specified and directed.

S&F in repair Brass CP bottle traps 40mm bore for wash basins with inlet & outlet screwed for pipe or connections including necessary packing, union & cap complete all as specified and directed.

S&F in repairs vitreous China bowl urinal angle back of size 430 x 370 x 340 mm white (min.), with grating & union for discharge pipe (excluding flushing cistern, flush pipe & waste pipe) complete all as specified and directed.

S&F in repair stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x420mm with bowl size 410mm x330mm x160mm complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified & directed.

S&F in repair PVC low level flushing cistern of 10 Ltr capacity including flushing pipe bend PVC bend etc. complete all as specified and directed.

S&F in repairs tolilet paper holder, vitreous China white, box type to walls with CP (CP) brass screws complete all as specified and directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as specified and directed.

S&F in replacement rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layered wall construction hoisted & fixed in position of 1000 Ltrs capacity complete all as specified and directed.

S&F in replacement rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layered wall construction hoisted & fixed in position of 500 Ltrs capacity complete all as specified and directed.

M&L for applying two coats of elastomeric-acrylic waterproof protective cum decorative coating on external surface of RCC, concrete panels, plastered surface of wall etc. over a coat of primer including preparation of surfaces all as per manufactures instructions complete all as specified and directed.. Make: Dr Fixit (Raincoat) or equivalent make as approved by GE

M&L for repairing and filling cracks up to 5mm width with crack-x paste ready to use crack filler (Make: Dr fixit or equivalant) for internal &external surfaces cracks in wall/ plaster all as per manufacture instruction including preparation of surfaces complete all as specified and directed.

M&L for applying evenly a coat of blown type bitumen 85/25 at the rate of 1.50 kg per square metre over a coat of bitumen primer @ 0.30 to 0.50 kg per Sqm and blinding with clean dry sand @ 0.05 Cum. per sqm over roof surfaces including preparation of old surface complete all as specified and directed.

M&L for point wiring for the following with 1.5 Sqmm PVC insulated FR, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC Casing -n-caping /conduit of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green including taking down carefully copper/aluminum pt wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs, & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor etc:- .

For one light point or fan point controlled by one switch

For one Call Bell point controlled by one push button switch

For 5Amp independent socket point controlled by one switch

For one 3 pin ,5 Amp socket point with other switch on the same board

All as per Srl item No. 137 here in before but for power point wiring using with 2.5 sqmm PVC FR insulated ,unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable as continuous earth wire -ditto-

M&L for concealed point wiring for the following with 1.5 Sqmm PVC-FR insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows, etc. all as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green including taking down carefully copper/aluminum pt wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs, & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor etc:-

For one light point or fan point controlled by one switch

For one Call Bell point controlled by one push button switch

For 5Amp independent socket point controlled by one switch

For one 3 pin ,5 Amp socket point with other switch on the same board charge

All as per Srl item No. 139 here in before but for power point wiring using with 2.5 sqmm PVC FR insulated ,unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable as continuous earth wire -ditto-

S&F modular switch, one way,6 Amp 230, 1 module complete all as specified and directed .

S&F modular socket 6 Amp-2/3 pin combined 2 module complete all as specified and directed.

S&F modular switch, one way,6 A/16 Amp 230, 1 module complete all as specified and directed.

S&F modular socket 6 A/16-2/3 pin combined 2 module complete all as specified and directed.

S&F modular fan step regulator 120 Watt -2 module complete all as specified and directed .

S&F modular bell push 6A one module complete all as specified and directed.

S&F switch piano type flush, single pole, one way 5 A, 230 V complete all as specified and directed.

S&F socket outlet, 5 pin, 5 Amp, flush type, 230 V complete all as specified and directed

S&F switch piano type flush, single pole, one way 15 A, 230 V complete all as specified and directed.

S&F socket outlet 2 in 1,6 pin, 5/15 A, flush piano type 240 V complete all as specified and directed

S&F ceiling rose, surface backlite,three terminal complete all as specified and directed .

S&F lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed

S&F in repair/replacement bell ding dong 230 V, single phase complete all as specified and directed.

S&F electronic double space rotary 5 speed type regulator 120-280 V complete all as specified and directed .

S&F bell push flush type one way 5Amp 240 Volt complete all as specified and directed.

M&L for sub main wiring with two single core PVC FR insulated unsheathed stranded copper conductor cable FR, 02 runs of 01 Single core of size 4 sqmm (for main current) drawn in & incl PVC Casing-n-caping of suitable size ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 4 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed

S&F in replacement testing and commissioning of MCB SP 240 volt 6 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed

S&F in replacement testing and commissioning of MCB SPN 240 volt 16 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed

S&F in replacement sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar complete all as specified and directed. Note :- Cutting and chasing in stone masonary and making good to disturbed surfaces shall be included in quoted rate .

S&F in replacement double door metallic sheet metal enclosure for DB double door(IP-42/43) When MCBs to be used SPN 4 ways, 240 V with 200Amps rated bus bar complete all as specified and directed. Note :- Cutting and chasing in stone masonary and making good to disturbed surfaces shall be included in quoted rate .

S&F in replacement TL fitting 20 watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient complete all as specified and directed

S&F in repair/replacement socket outlet multi purpose, 3 pin, 15 Amp & 3 pin 5 amp, combination complete all as specified and directed

maharaja construction and suppliers

M K Construction

M/S AJAY JAIN