providing toilet facility for ladies staff and repair of stairs and Lobby of SAD Branch in HP University, Shimla-5

Excavation in foundations, trenches etc., in earth work, lift upto 1.50 Metres stacking the excavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. layers, when required in to plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres. a.) Pick & Jumper Work

Providing form work with steel plates 3.15mm. thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in: a) Flat surfaces such as soffits of suspended floors, roofs landings and the like. (i) Floors etc. upto 200 mm in the thickness.

Providing and laying cement concrete 1:6:12 (1 cement:6 sand :12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centring and shuttering in: a.) Foundation and plinth:

Providing and laying cement concrete 1:2:4(1 cement:2 sand :4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of centring and shuttering in: a.) Foundation and plinth:

Providing and laying cement concrete 1:1.5:3 (1 cement :1.5 sand :3 graded stone aggregate20mm nominal Size) and curing complete including cost of form work and reinforcement for reinforced concrete work in : a)Suspended floors, roofs, landings and shelves and their support balconies, beams, girders, bressumers and contilever upto all height

Providing mild steel/Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete: a) Tor Steel

Providing wood work in frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in position. a) 2nd class deodar wood.

Providing 40x3 mm flat iron hold fast 40cm. Long including fixing to frame with 10mm diameter bolts & nuts and wooden plugs and embedding in cement concrete block 30x10x15cm. 1:3:6 (1 cement: 3 sand: 6 graded stone) aggregate 20mm nominal size.

Providing and fixing paneled glazed or panelled and glazed shutters for doors windows and clerestory windows. including black enamelled iron butt hinges with necessary screws. a) 35mm thick. i) 2nd class deodar wood.

Providing and fixing P.G.I. Sheet lining (0.63mm thick) with butt jointing and nails (frame work and cover fillets to be measured and paid for separately).