86109SPECIAL REPAIRS TO INTERNAL ROAD ALONGWITH PERIMETER FROM BLDG NO 43 (CHILDREN PARK) TO BLDG NO T-28, BLDG NO T-28 TO P-61 TO LINK ROAD NEAR LIBRARY MI ROOM AND BLDG NO P-100 OF AIPT PUNE.

Amount

Scarifying and picking gravelled macadam or bituminous macadam surfaces in area not exceeding 400 Sqm and in exc 50 mm and n exc 100 mm in depth and removing the same to a distance n exc 50m and staking complete all as specified and as directed.

M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat with paving bitumen (VG-10 grade ) @ 2.50 kg per 10 sqm complete all as specified and as directed.

M&L for bituminous premixed asphaltic semi-dense concrete using paving bitumen (VG-30 grade), 25 mm thick (Consolidated thickness) using binder content @ 5.5% by weight of total mix (Job mix), using mechanical paver rolled & compacted to required camber and gradient complete all as specified and directed.Note : Quantity of bitumen shall be provided as per design mix approved by GE. Difference in quantity bitumen between as covered in this item and as actually provided (On plus or minus side) shall be adjusted.

M&L for premixed bituminous macadam with binder content @ (VG-30) 4% by weight of total mix (Job Mix) laid / rolled and compacted to required gradient and camber (consolidated thickness 75 mm or less) complete all as specified and as directed.

M&L for precast cement concrete Kerb stone with PCC type-C-1 (1:3:6) using 20mm stone aggregates including weathering slightly rounded or chemfered angles or throating etc and laid dry complete all as specified and as directed.

M&L for panting new suraface of PCC Kerb stones with two coats of synthetic enamel paint over one coat of primer including preparation of new surfaces complete all as specified and as directed.

M&L for repair to pot holes any depth, n.exc. 1.00 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in road paths etc, cutting around edges to at least 25 mm in depth making good by filling in screened and graded road metal applying tack coat with Bituminous primer (of bitumen grade VG-10) @ 5 kg per 10 sqm, putting in bituminous (of bitumen grade VG-30) pre-mix asphaltic semi dense concrete (design mix) 25 mm (consolidated thickness) with 5.5% binder content by weight of total mix, laid with mechanical paver, rolled and compacted to required camber and gradient with 8 to 12 tonne power roller complete all as specified and as directed.

M&L for providing through special applicator machine, auto retro-reflective thermoplastic road marking paint in yellow/white, pattern of specified strip, 3.00 mm thick centre line, stop line dashes arrow, brackets similar work on bituminous / cement concrete road surfaces as per IRC pattern including cleaning of road surface free from dust & moisture and putting in duly mixed with 8% glass beads complete all as specified and as directed.

S&F high intensity ABS Plastic road stud of size varying from 100x100x20 mm to 110x90x17 mm and colour of body amaber, red or white, two way reflective 180 degree and fixing of stud with approved high intensity thermoplast adhesive bond & nailing the same on specified section of the road with MS anodised pin of standard pattern of manufactures 8 x 37 mm long including cutting making holes on road for proper fixing of the same all as per specified and directed.

M&L for Water Bound Macadam (WBM) 7.5 cm (compacked thickness) with sand stone coarse aggregate of grading 2 (63 to 40 mm size) or of grading 3 (50 to 20 mm size) of granite , trap or basalt, spread, rolled and consolidated to gradient and camber required with granite trap or basalt type aggregate 8 to 12 ton power roller complete all as specified and as directed.

M&L for Rough excavation n exc 1.5 m deep and getting out in soft / loose soil complete all as directed.

Removing excavated material exc 1.5 km but n exc 5.0 k m and depositing where directed.

M&L for moorum or red bajri filings in side berms of road ,floor or paving ,laid in layer n exc 15 cm thick , spread , levelled and rammed incl watering complete all as specified and as directed.

M&L forming embankments including raising (or loweing) earth , spreading in layer n exc 30 cm thick , watering, raming / rolling and finishing to required size , shape etc n exc 1.5 m high from base all as per specified and directed.

MOHANLAL MATHRANI CONS. PVT. LTD.

M/s ESS KAY Construction

Mourya Enterprises