EIJE/NIT01/2023-24

Dead Weight Pressure Gauge Tester • Bourdon tube pressure gauge as manometer • Manometer with transparent scale • Manufactured from corrosion resistant materials • Components arranged on base plate. • Set of weights • Medium for transmitting pressure: hydraulic • capacity of 25kg/cm2 • The system is nickel chrome • The weights are Zink Iron)

Cut Section Model of Hermetically Sealed Compressor

Universal Bevel Protractor (Accuracy: 0.01 mm Material: Stainless Steel Diameter: 70 mm Size: 300 MM Type: Analog Graduation 5 Min Straightness .00016"+(.00005xL/2)")

Cut Section model of Lamont Boiler

Slip Gauge Set; Special Set (M87), Grade I, High grade steel, 9 mm wide & 30-35 mm long cross section.

UTM Machine (Material:MS Voltage:220 V Phase: Single Phase Capacity: 10 To 100 Ton Cross Travel: Up to 1000 mm Weight: 1500 Kg)

Mollier Chart Flex (40" × 30")

Teak Wood; Wood for Pattern Shop Size: 2'×1"×6'

Thermal Conductivity Of Metal Rod; • Frame: Made of M.S. Square Tubes & Sheets, Welded & Powder coated • Optional Accessories: Rotameter for Water Flow Measurement • Electric Heater : Clamp Heater, Capacity 200 W, Supply 230 V AC • Insulation Jacket: Made of Mild Steel, Mild Steel Rod is insulated by Asbestos powder • Diameter of Metal Rod 25 mm, Length of rod 300 mm

Cut Section Model of screw type rotary air compressor

Chart of Velox Boiler with labelling (Size:30"× 40", Material: PVC, with roller)

Chart of Mollier Diagram with labelling (Size: 23’’ x 36’’, Material: PVC, with roller )

Chart of T-T-T Diagram with labelling (Size:23’’ x 36’’, Material: PVC, with roller )

Chart of UTM Machine & Sample with labelling (Size:30"× 40", Material: PVC, with roller )

Chart of Torsion Testing Machine with labelling (Size:30"× 40", Material: PVC, with roller )

Chart of Iron-Carbon Equilibrium diagram with labelling (Size:23’’ x 36’’, Material: PVC, with roller )

Chart of Vernier Caliper with labeling (Size:23’’ x 36’’, Material: PVC, with roller )

Chart of Vernier height gauge with labeling (Size:23’’ x 36’’, Material: PVC, with roller )

Chart of Thread Measurement with labeling (Size:23’’ x 36’’, Material: PVC, with roller )

Chart of Gear Tooth Vernier Caliper with labeling (Size:23’’ x 36’’, Material: PVC, with roller )

Chart of Hermetically Sealed Compressor with labelling (Size:30"× 40", Material: PVC, with roller)

Chart of Domestic Refrigerator with labeling (Size:30"× 40", Material: PVC, with roller)

Chart of Full Pressure Engine Lubricating System with labelling (Size:30"× 40", Material: PVC, with roller )

Chart of Constant Mesh gear Box with labeling (Size:30"× 40", Material: PVC, with roller)

Chart of Synchromesh gear Box with labelling (Size:30"× 40", Material: PVC, with roller)

Chart of Components of a Chasis with labelling (Size:30"× 40", Material: PVC, with roller)

Chart of Knuckel Joint with labelling (Size:30"× 40", Material: PVC, with roller)

Chart of Intersection of a Prism and Cone (Size:30"× 40", Material: PVC, with roller)

Chart of Projection of a straight line in different quadrants (Size:30"× 40", Material: PVC, with roller)

Chart of Plummer Block - details and arrangement (Size:30"× 40", Material: PVC, with roller)

Chart of Centrifugal Pump with labelling (Size:30"× 40", Material: PVC, with roller)

Chart of Balanced type Vane Pump with labelling (Size:23’’ x 36’’, Material: PVC, with roller )

Chart of Bent Axis Piston Pump with labelling (Size:23’’ x 36’’, Material: PVC, with roller)

Chart of Lathe Machine with labelling (Size:30"× 40", Material: PVC, with roller)

Chart of Single point cutting Tool Geometry with labelling (Size:30"× 40", Material: PVC, with roller)

Chart of Screw Jack Assembly with labelling (Size:30"× 40", Material: PVC, with roller)

Chart of Cotter Joint assembly and design with labelling (Size:30"× 40", Material: PVC, with roller)

Chart of Vertical Drilling Machine with labelling (Size:30"× 40", Material: PVC, with roller)

Chart of Shaper Machine with labelling (Size:30"× 40", Material: PVC, with roller)

Chart of safety on a Lathe Machine (Size:23’’ x 36’’, Material: PVC, with roller)

Chart of safety on a Milling Machine (Size:23’’ x 36’’, Material: PVC, with roller)

Chart of safety on a Shaper Machine (Size:23’’ x 36’’, Material: PVC, with roller)

Chart of safety in Carpentry shop (Size:23’’ x 36’’, Material: PVC, with roller)

Chart of safety in Fitting shop (Size:23’’ x 36’’, Material: PVC, with roller)

Chart of General Precaution in Workshop (Size:30"× 40", Material: PVC, with roller)

Chart of CNC Turning with labelling (Size:30"× 40", Material: PVC, with roller)

Chart of Elements of Jigs (Drill Bushes) with labelling (Size:23’’ x 36’’, Material: PVC, with roller)

Chart of TIG Welding with labelling (Size:30"× 40", Material: PVC, with roller)

Chart of MIG Welding with labelling (Size:30"× 40", Material: PVC, with roller)

Chart of Engine Cooling System with labelling (Size:30"× 40", Material: PVC, with roller)

Digital Lab Trainer(Bread Board Model) (Built-in DC Regulated Power Supply; at least 8 logic Input switches; at least8 output LED; Pulse Generator for Clock frequency ; Patch chords)

Arduino UNO Board (ATMEGA328)

Experimental kit to study PAM, PWM and PPM modulation and demodulation (Pulse generator with variable frequency and amplitude, PAM modulator and demodulator, PWM modulator and demodulator, PPM modulator and demodulator)

UJT trainer kit with P.S. & patch cord

LED colour TV demonstration Kit (Display type: LED, HD: Screen Size: 24": Connectivity: USB, HDMI, AV: Test points to be present minimum 10 nos.: Switched faults to be provided: Product tutorial should be present)

Microwave oven demonstration trainer kit (Type: Solo: Capacity: 17 ltr.: Control type:Mechanical: All circuits & panels to be mounted on-board: Test points to be provided to analyze signals: Instruction manual to be provided)

Washing Machine demonstration trainer kit (Application: Lab Experiment: Semi-Automatic: Tank capacity: 6.5 kg: Block diagram & circuit diagram to be mounted on the lid: Test points to be provided)

Mobile communication trainer kit to study various signalling and fault insertion techniques (GSM Handset trainer kit.  Operate both on Windows and Linux platform  USB Interface for communication  Best suitable for IoT gateway application  External connector to interface with any microcontroller  Easy understanding of AT commands  Real time operation  Built in network status LED  Audio interface connector  Simple/Easy operation  External antenna  Application module relay interface for AC device (optional))

Trainer kit for Mobilephone set to study Transmitter and receiver sections in mobile handset and measure frequency band signal ( Real time Mobile Operation # Full understanding of mobile phone working # Frequency measurement and band verification # Provides study of all sections in mobile phone # TX/RX Frequency measurement # 3G/4G technology and GMSK signals # GSM data rate # Detail study of User Interface Control Signals # Detail study of SIM Operation # Battery identification and charging study  Switched Faults

Consumable (9v battery,CRO probe,digital Ics)

CRO (20 Mhz ,dual trace,dual channel)

Trainer kit for Mobile Phone (Features : The experimental kit will be capable i) To study general block diagram of a mobile phone. ii) To study Mobile transmission section. iii) To study mobile reception section. iv) To study different nos. of faults provided with the trainer. v) To study & observe voltages/waveforms of each test points. vi) To study mobile charging circuits. vii) To use Mobile phone as modem for using AT commands as given; a) Sending text messages, read/delete massages etc. b) Calling to a no, reject/accept the incoming calls etc. c) GPRS related commands. Study of Bluetooth technology & connection with other BT devices. Bluetooth profiles : BIP, BPP, DUNP, FTP, HID, OPP , SAP, A2DP, PBAP, SPP etc. To study general idea of SIM card. (Local SIM card must be inserted by the user at the time of experiment).)

Salt Bath Furnace for Heat Treatment (• Resistance Heating (ELEMENT) • Operating Temp.: Up to 1200°C • Digital temp. Controller (PID) • Chamber size : 450mm x 300 mm x 300 mm • Furnace uniformity +/- 2°C • Temp recorder with 2 channel placed at opposite sides • Salt for use with two times top up • Spare heating element 2pc)

In-Situ Metallography Kit (• Items: Portable grinder/polisher, Grinding discs, lapping cloths, Diamond pastes, Aerosol spray, replication film, paste, reflector and gumming tape for excellent contrast or Transparent replica - Film thickness - 125 microns, 30 microns, Replica liquid, Glass slides)

Automatic electrolytic polishing machine (• Function: Fully automatic electrolytic polishing and etching with automatic scanning function • Preparation time: within 30 sec • Electrolyte for low / high alloyed steels & Aluminium • Pump and Magnetic stirrer • Integrated cooling system)

Micro-hardness tester (• Test Load : 10,25,50,100, 200, 300, 500, 1000 gm • Scale: Knoop & Vickers • Dwell Time: 5-90 seconds settable • Objectives : 10X, 20X, 40X, 60X • Loading and Unloading : Motorized • Measurement – Automatic and or with manual micrometer eyepiece. • Traverse: Automatic and or manual with micrometer. • Focusing - Motorized focusing with manual over-ride • Computerized imaging attachment, dedicated software to measure hardness on computer with report generation facility • Accessories: sheet holder, Wire holder, Hardness test block, bulb, indenter.)

Cracked Aluminum Test Block (for Penetrant Sensitivity checking in DPT) (aluminum test piece that measures 3" x 2" x 3/8" with a 1/8" wide with a milled notch that separates the blocks two sides to facilitate side-by-side penetrant comparison. The test block is used to check the strength of “in-use” penetrants. This is done by processing one half of the block with “used” penetrant, and the other half with fresh penetrant. Can be used to compare sensitivity of different penetrants or sensitivity of new and old penetrants. Complies with ASTM E165 and ASME Boiler and Pressure Vessel Code section V & III, and MIL-I-23135-C.)

Pie gauge/ Magnetic Flux Indicator (To be made from eight ferrous segments, braised into a single piece, providing a star pattern of nonferrous discontinuities. Eight linear discontinuities to provide indications in all directions Non-ferrous handle with pivot. SPECIFICATION COMPLIANCE • MIL-STD-271 • ASTM E709)

20MHz analog CRO(Dual Trace), BandWidth:- DC ~ 20MHz (-3db) Y Deflection:- 5mV / div ~ 10V / div. Rise Time:- <18ns，Mag _70ns ：17.5ns. Max Input:- 400V(DC+ACp-p)

50MHz Digital Storage Oscilloscope, Bandwidth 50MHzReal-time Sampling Rate 500 MSa/s, Equivalent Sampling Rate 50GSa/s.Memory Depth: 32KptsTrigger types: Edge, Pulse width, Video, Slope, AlternativeUnique Digital Filter function and Waveform Recorder function, Max Input:- 400V(DC+ACp-p)

3D Model showing different parts of a coal fired thermal power station

3D Model showing different parts of a gas fired thermal power station

3D Model showing different parts of a diesel power station

3D Model showing different parts of a nuclear power station

3D Model showing different parts of a hydro-electric power station

3D Model of boiler showing its different parts used in coal fired thermal power station

3D Model of boiler showing its different parts used in nuclear power station

3D Model of water turbine showing its different parts, used for hydro-electric power plant

Colour flex chart describing different parts of a coal fired thermal power station Size:30"× 40", Material: PVC, with roller

Colour flex chart describing different parts of a gas fired thermal power station Size:30"× 40", Material: PVC, with roller

Colour flex chart describing different parts of a diesel power station Size:30"× 40", Material: PVC, with roller

Colour flex chart describing different parts of a nuclear power station Size:30"× 40", Material: PVC, with roller

Colour flex chart describing different parts of a hydro-electric power station Size:30"× 40", Material: PVC, with roller

Colour flex chart describing different parts of boiler, used in coal fired thermal power station Size:30"× 40", Material: PVC, with roller

Colour flex chart describing different parts of boiler, used in nuclear power station Size:30"× 40", Material: PVC, with roller

Colour flex chart describing water turbine showing its different parts, used for hydro-electric power plant Size:30"× 40", Material: PVC, with roller

3-phase Induction Motor speed control using PWM inverter for interpreting speed-torque characteristics using VVVF drive

UPS Trainer Kit (1kVA) Output Voltage : 230 V AC Nominal, Input Voltage : +12V DC Battery. Capacity : 1KVA, Output Frequency : 50 Hz Accuracy : + 5%. Switching : Automatic.

SMPS Trainer Kit incl. ±5V, ±12V Input Voltage: AC 100 – 264V 50 / 60Hz Output Voltage: 12V DC, 0-5A Output voltage: Adjustment Range: ±20% Protections: Overload / Over Voltage / Short Circuit Auto-Recovery After Protection Universal AC input / Full range 100% Full Load Burn-in Test Cooling by Free Air Convection High Quality and High Performance LED power supply with a metal body for hidden installation for LED lighting Design with Built-in EMI Filter, improve signal precision. Certifications: CE & RoHs No Minimum Load. Compact Size Light Weight. High Efficiency, Reliabiltiy & low energy consumption Controller: Satandard

Commutation Kit of SCR(Class A to F) Completely self – contained stand – alone unit. Demonstrates the principle and various methods of Forced Commutation of SCR. 1. Self-Commutation by resonating load ( Class “A” Method ). 2. Self-Commutation by an L C Circuit ( Class “B” Method ). 3. Complimentary Commutation ( Class “C” Method ). 4. Auxiliary Commutation ( Class “D” Method ). 5. External Pulse Commutation ( Class “E” Method ). * Supply required 230V, 50Hz AC. * Built-in IC based DC Regulated Supply and LED indication for supply “ON”. * Built-in load facility in the form of LED’s. * Connecting each circuit separately and verifying its principle. * Multicoloured test points are provided to observe the waveform and voltages. * Set of required number of patch cords. * Housed in an elegant cabinet with a well spread intelligently designed circuit layout engraved on the front panel. * Strongly supported by a comprehensive instruction manual complete with theory and operating details.

Colour flex chart describing single line diagram of a given distribution system(LT & HT) Size:30"× 40", Material: PVC, with roller

Colour flex chart describing short transmission line(220KV) Size:30"× 40", Material: PVC, with roller

Colour flex chart describing medium transmission line(220KV)(both T & π-model) Size:30"× 40", Material: PVC, with roller

Power factor improvement kit using static condenser including load R-L load of at least 2KVA with appropriate capacitor bank.

Setup for Load test on 1-ph induction motor: Load test kit of 1-ph induction motor(1hp,230V,50Hz)

Loading test kit of 3-phase alternator: (2kW,415V,50Hz) with 3-ph R-L Load box coupled to a DC motor; capable to perform as synchronous motor test with DC generator load; integrated with all required measuring instruments

Speed control kit of Stepper Motor including reversing arrangement with 8051 Microcontroller: Stepper motor of appropriate capacity to be served by 8051µC

Speed control kit of AC Servo Motor: Motor Spec: 3000rpm, 200W, 0-240V, Control Torque: Standard with all needed accessories

Speed control kit of DC Servo Motor: •Voltmeter VDC 3.5 Digit. 200mV •RPM Indicator for Speed Measurement •Voltmeter VDC 3.5 Digit 20V Power Supply: •IC regulation in controller circuit power supplies •Operated on Mains power 230V, 50Hz +10% Features: •Position control of a 12 volt, 1 Amp DC geared PM motor (50/60 RPM) •Calibrated dials with 1 degree resolution for reference and output position •Two 360 degree Servo-potentiometers •Built in step signal •Built in waveform capture/display card for study dynamic •Electronic techogenerator for feedback •Non-contact eddy current break for load •Speed control of 12V, 4W, permanent magnet DC motor •Speed range up to 3000 RPM (typical

MCB Test kit for performing load test: Kit should be able to perform Short-circuit, Over load, Thermal trip test for MCB with rating upto 30A

Dismantled ELCB & RCCB kit for demonstration purpose: ELCB: Single Phase 2 Pole ELCB, RCCB, ISI Marked 32A MCB with High Voltage, Overload Protection, Current 3 to 30 mA RCCB: Breaking Capacity 10 kA, Frequency, 50 Hz, Number of Poles 2P, Operating Characteristics: AC Rated Current 40 A, Sensitivity 30 mA, Standard, IS 12640-1 & IEC 61008-4, Test Button Yes

Testing kit for percentage differential protection of transformer using transformer differential relay(electromagnetic/µP based/static): Standard for Laboratory purpose

Colour flex chart describing different parts of ACB & VCB (33KV, 15MVA): Size:30"× 40", Material: PVC, with roller

Experiment kit to measure solar radiation using Pyranometer on tilted surface at different angle inclination: Standard for Laboratory purpose

Colour flex chart describing different parts of solar flat plate collector & solar concentrating collector & trough collector: Size:30"× 40", Material: PVC, with roller

Experiment kit to measure thermal performance of solar water heating system: Standard for Laboratory purpose

3D model describing different parts of (i) Solar street lighting system & (ii) 1kW small wind turbine(SWT): 3D Model for Laboratory purpose

Setup of 250Wp solar PV plant including all accessories: Solar panel specifications:Peak power: 250W; Maximum power voltage: 20.2V; Maximum power current: 12.38A; Open circuit voltage: 23.9V; Short circuit current: 13.12A; Power allowance range: +/- 3% Hybrid inverter specifications: Nominal battery voltage: 12V; Continuous power output: 1000W / 1000VA; Surge power: 2000VA Output voltage: 230V AC; Output frequency: 50Hz /60 Hz; Output waveform: Pure sine wave; Maximum solar input power: 600W; Maximum open circuit solar input voltage: 55V; Maximum solar charging current: 50A; Maximum mains AC charging current: 20A; Maximum combined charging current: 50A; Peak efficiency: 93% Battery specifications (per battery): Nominal voltage: 12V; Nominal capacity: 50Ah (10h rate) / 55Ah (20h rate); Maximum charging current: 25A; Self-discharging rate: <3% per month; Cycle lifetime at 30% D.O.D.: 1000-1100 Pressure control: safety valve installed Terminal type: F13 (bolts and washers included) Operating temperature: from +10C to +40C

Setup of Small Wind Turbine plant including all accessories: Standard for Laboratory purpose

Study kit of assembling and dismantling of CSP plant using parabolic trough or disc: Standard for Laboratory purpose

Study kit for assembling vertical axis or horizontal axis SWT: Standard for Laboratory purpose

Digital LCR Multimeter: Digital lcr meter (battery operated), model: 4070 Range: 0.1µh to 20h, 0.1pf to 2000µf, 0.1ohm to 20mohm Accuracy: 2mh, resolution: 1uh, accuracy: 20mh, resolution: 10uh, accuracy: 200mh, resolution: 100uh Accuracy: 2nf, resolution: 1pf, accuracy: 20nf, resolution: 10pf, accuracy: 200nf, resolution: 100pf, accuracy: 2uf, resolution: 1nf, Accuracy: 200, resolution: ±(0.8 percent+5)0.1, accuracy: 2k, resolution: 1, accuracy: 20k, resolution: 10, accuracy: 200k (Make: Metravi)

Handheld Power Meter or Power Analyzer with Socket: Voltage: 85V-265V, Current; 0.002A~20A, 50Hz, 1-ph

Analog Power factor meter(1-ph & 3-ph): Standard for Laboratory purpose

Multimeter with clamp meter arrangement with hfe LCR: Standard for Laboratory purpose (Make: Metravi)

Three phase power measurement KIT(Y & Δ load R-L load) incl. 3-ph wattmeter with 2kW range: Standard for Laboratory purpose

Kit for troubleshooting single phase electronic energy meter: 230V, 1-ph, 50Hz

Three phase trivector meter: Salient features Class 0.5s as per relevant IS and IEC Standards 5A current rating 3 Phase 4 Wire 4 Quadrant Measurement Anti-tamper features Self-diagnostic capability Multiple tariff / Time of day feature Bidirectional Energy recording Up to 4 Maximum Demand registers Load Survey (Interval Data) features Up to 12 reset backups Optical port/RS 232 / RS 485 / IR / IrDA / RF (2.4 GHz/865-867 MHz) (optional) (Make: L&T)

Brake test kit of DC series motor: 220V DC, 2HP with allied required accessories

Back-to-back test kit of single phase transformer: 1-ph, 240V, 50Hz, 1KVA(2 nos.) identical transformers with other standard accessories

Isolation transformer kit: 230v; 230v/10amp 230v; 230v/5amp

Colour flex chart describing different vector groups of theree phase transformer: Size:30"× 40", Material: PVC, with roller

Full-wave fully controlled bridge rectifier kit with & witout filter arrangement: Standard for Laboratory purpose

Kit to find the characteristics of Zener Diode: Standard for Laboratory purpose

Kit to find the characteristics of MOSFET: Standard for Laboratory purpose

UJT relaxation oscillator trainer kit: Standard for Laboratory purpose

Singlestatge transistor trainer kit(CE-mode): Standard for Laboratory purpose

Trainer kit for SR, D, JK & T – flip-flop: Standard for Laboratory purpose

Trainer kit for realization of encoder and decoder circuit: Standard for Laboratory purpose

Trainer kit for realization of multiplexer and demultiplexer circuit: Standard for Laboratory purpose

Trainer kit for implementing DAC & ADC: Standard for Laboratory purpose

Connector cables for ADE Lab. of different types: Standard for Laboratory purpose

Arduino Uno R3 Board with LCD1602, Servo motor, relayes, processing and 'C' Code, beginner starter kit with mannual and allied accessories: Standard for Laboratory purpose

Trainer kit for 8051 µC programming: Trainer kit for 8051 µC programming with keypad to write program

Trainer kit using 8051 µC for measurement of AC voltage, current, frequency & phase angle using suitable CT, PT, ZCD, ADC, etc.

Demonstration kit for identifying PVC, XLPE, VIR, Catenary, FRLS, FRLSH cables/wires of different current rattings: Standard for Laboratory purpose

Megger: Insulation tester (500V) with hand-driven gen.: 500V, 2500 Mega Ohms

Megger: Insulation tester (2500V) with hand-driven gen. 2.5KV, 2500 Mega Ohms

3-ph Smart Energy Meter for LT power measurement, 3-ph, 415V, 4-wire, kWh Meter, Current: 10-60A, Class 1.0 accuracy as per relevant IS and IEC Standards, with LCD display [Make: L&T]

Trainer kit for DC chopper drive with resistive load & DC separately excited motor. 1/8 hp, 200VDC operation, Current limit protection, Speed control using frequency and duty cycle variation, Jones chopper based control, Motor loading arrangement can be provided/Resistive load may be connected, Other variety of controllers with converter control with closed loop controller

Trainer kit for controlling the speed of separately excited DC motor by changing the firing angle of SCR using 1-ph full converter. Power Supplies: • Power Supply +15Vat 150mA • Isolated Supply 0-220V AT 5A. • Operated on Mains power 230V, 50Hz +10% Digital Meters: • Voltmeter 2000V AC • Voltmeter 2000V DC • Ammeter 2A DC Components are mounted on the panels are: • SCR TYN604 (2 Nos.) • DIODE 1N5408 (2Nos.) • Diode BA159 • AC Phase Control by Gate Control Firing Circuit. • Snubber Circuit. LOAD: • 1/2HP DC SHUNT MOTOR. • Inductor as Load 230V,1A • Lamp Load 230V,60W

µController based 3-ph Syn. Motor drive: Trainer kit for controlling the speed of synchronous motor(1kVA) drive using µC.

Demonstartion kit showing different types of power semiconductor devices with heat shink e.g. SCR, IGBT, GTO, MOSFET, Standard for Laboratory purpose.

Kit for magnetic control of IM: Control and power circuit for (i) forward and reverse rotation of squirrel cage IM using contactor, (ii) automatic star-delta starter of squirrel cage IM, (iii) Dynamic braking of squirrel cage IM, Standard for Laboratory purpose.

Screw driver set, Standard for Laboratory purpose.

6” slide range, Standard for Laboratory purpose.

Wire stripper, Standard for Laboratory purpose.

Crimping tool(1 sq. mm. to 6 sq. mm.).

2.5 sq. mm. stranded PVC copper wire

1.5 sq. mm. stranded PVC copper wire

1 sq. mm. stranded PVC copper wire

Soldering kit: 20W with solder material

Contact type tachometer(Range: 0-10,000 RPM)

Set-up with different type TL lamps(Conventional & LED) with fittings containing electrimagnetic ballast/electronic ballast etc.: TL fittings with: 1. electronic & electromagnetic ballast for (i) Single 40W, 240V, 50Hz TL, (ii) 2x40W, 240V, 50Hz TL, 2. 20W LED TL with fittings incl.

3-ph Capacitor bank of 2-4KVA for correcting power factor of 415V, 50Hz, 1500 RPM, 2HP, 3-ph Squirrel Cage IM with facility to connect the stator of the 3-ph IM both in Star & Delta mode and a tri-vector meter having facility to measure KW, KVA, KWh, KVARh, PF.

Transformer oil breakdown strength kit: Breakdown strength kit with 5 Ltr. fresh transformer oil, Standard for Laboratory purpose.

Chart for demonstration of different fire extinguishers: Colour flex chart describing different types of fire extinguishers (4' x 3'), Material: PVC, with roller

Chart for demonstration of artificial respiration (CPR) and prepare a report.: Colour flex chart describing different types of artificial respiration (CPR) (4' x 3'), Material: PVC, with roller.

SUSHAMA ELECTRONICS

DELTA TECHNOLOGIES

DELTA TECHNOLOGIES

SUSHAMA ELECTRONICS