CERTAIN ROUTINE B AND R MAINT WORKS IN MD AND OTM ACCN AT DIAT AND MILIT GIRINAGAR PUNE

Amount

Dismantling of plain or corrugated steel sheeting ,any gauge and thickness ,including nanital or similar pattern roof covering complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4 sqm each and removing from site complete all as specified and directed.

All as per item No. 2.00 above but n.exc 1.5 sqm each complete all as specified and directed.

Taking down shutters of any description n. exc. 1 sqm each complete all as specified and directed.

Demolition of stone/boulder ashlar facings, dressed stone work, precast concrete articles and precast concrete block walling built in cement mortar complete all as specified and directed.

M&L precast cement concrete block masonry with solid block, type C-1,1:3:6 mix ( using 20mm graded aggregate ), exc 10cm in width and setting in cement mortar 1:6, complete all as specified and directed.

S & F Pre-painted galvalume sheet of roof tile pattern/curved type/ any pattern (aluminium,Zinc and silicon coating) GI based,corrugated steel sheet minimum thickness 0.50 mm of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw including ridges and crimp eaves complete all as specified and directed.

M&L for Prepainted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screw complete all as specified and directed.

S&F rolled mild steel in joist, channels, angles or tee sections, fixed ,post independently without connecting plates, etc.,conf to Fe 410-W (Gde-E-250) quality 'B' complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confrming to IS 1161-1979 grade St-240 complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for first quality joint free Non Skid glazed ceramic tiles (coloured) 7 to 8 mm thick (square/rectangular) area of each tile excedding 0.11 sqm but not exceeding 0.18 sqm as in floors set and jointed in cement slurry and pointed in coloured cement as directed with and including provision of screed bed 15mm thick in CM (1:4) complete all as specified and directed.

M&L for 1st quality, joint free glazed ceramic coloured tiles 300mm x 450mm x 7mm thick on verticle surface of walls set and jointed with neat cement slurry @ 3.00 Kg / Sqm and pointed in white cement with pigment to match the shade of tiles, with and over 10mm thick rendering in CM 1:4, complete all as specified and directed.

M&L vitrified coloured glazed ceramic tiles 10mm thick (square/regtangular) polished , area of each tiles not exc 0.36 sqm in floors etc and joineted neat in cement slurry and pointed in white or colour cement to match with & over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Taking down cement plaster on brick or stone walls including raking out joints , hacking for key , scrubbing down with water etc complete all as specified and directed.

M&L for rendering 10 mm thick cement plaster in CM 1:6 on brick/concrete or stone surfaces finished even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick cement plaster in CM 1:4 on brick/concrete or stone surfaces finished even & smooth without using extra cement complete all as specified and directed.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S & F pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs,hinges lock strike plate etc complete all as specified and directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type both sides (ISI marked) complete all as specified and directed.

S&F 300 mm long alluminium alloy anodised sliding door bolt with hasp &staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alluminium alloy and fixed complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, and fixing in the frame at site complete all as specified and directed.

S&F 150 mm long aluminium, anodized, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F stainless steel butt hinges of size 100 mm complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodized of size 150 mm complete all as specified and directed.

M & L Sheet glass,ordinary quality 3 mm thick and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S & F Door closer hydraucally regulated designation No-3 ,universal type ,suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed.(aluminium die cast) body complete all as specified and directed.

S & F Galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and avrage width of aperature 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S & F 35 mm Glazed and skelton shutters, open rebated and prepared to receive glass,gauze,etc.(without sash bar) edges for framing plain ,chamfered or rounded ,fitted with cut and mitred beads for securing glass etc,sizes of shutters complete all as specified and directed.

S&F three track sliding window with 4mm thick tinted glass in two shutter and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing including good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed. Series of aluminium section as per Jindal is (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.

S&F anodised powder coated (thickness of powder coating not less than 50micron) aluminim window and ventilator shutters, fixed type without sash bar, aluminium section weight not less than 0.55kg/mtr including necessary joining cleats, glazing clips, rubber packing, screws etc complete all as specified and directed.

M&L for 4mm thick figured glass, pin head type and glazing with not exc.0.5Sqm in each pane to aluminium frame work for ventilators complete all as specified and directed.

S&F in repair viterous china flat back urinal bowl type of min size 465mm x 355mm x 265mm, white, with grating and union of discharge pipe including connection to flush pipe and out going pipe, fixed in repair complete all as specified and directed.

S & F in repairs vitreous china padastal pattern, "EWC" coloured with 'P' trap110 mm and incl connection to trap, and to flushing pipe anti-syphonage pipe, etc. with flat PVC low level flushing cistern 10 Ltr capacity, complete all as specified and directed.

S&F in repair plastic water closet seat back closed pattern with flat bottom and cover mild steel chromium plated hinging divice fixed complete all as specified and directed.

S&F in reapair CP health faucet 15mm bore with fittings, complete all as specified and directed.

S&F in repair CP jet spray with CP connection pipe for EWC 15mm bore with fittings, complete all as specified and directed.

S&F in repair CP brass bib cock, cast copper alloy with capston headed handle, screwed down screwed for iron pipe or for brass ferule of 15mm dia complete all as specified and directed.

S&F in repair Stop valve cast copper alloy screwed down high pressure with capstan head, handle chromium plated angular type screwed both ends for iron pipe 15 mm bore or for unions complete all as specified and directed.

S&F in repair Stop valve cast copper alloy with crutch or butter fly handle screwed both ends & screwed for iron pipe of 20mm dia complete all as specified and directed.

S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Taking up or down steel tubing 15mm bore and connections including cleaning for refixing or removing from site complete all as specified and directed.

All as per item No 42.00 above but 20 mm bore pipe complete all as specified and directed.

S&F tube medium grade galvanized with and including all fitting and fixed complete to walls and ceiling or laid in floor bore of pipe 15 mm complete all as specified and directed.

S&F tube medium grade galvanized with and including all fitting and fixed complete to walls and ceiling or laid in floor bore of pipe 20 mm complete all as specified and directed.

S&F in repairs PVC (SWR) floor trap (Dia of outlet 63mm), plain with grating including jointing to waste pipe fixed in cement all as specified and directed.

S&F in repair soap dish any type fixed type fixed to plugs with chromium plated brass screws complete all as specified and directed.

Dismantling water tanks exc 250 but N exc 500 lts capacity including disconnecting water supply pipes and removing from to store complete all as specified and directed.

S&F 500 litre capacity rotational moulded polyethylene water storage tanks cylindrical vertical with closet top hoisted and fixed in position all as specified in SSR (2009) Part I including 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod with high density platic ball complete all as specified and directed.

S&F in repairs 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium road and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

Supply & fix 2.5 mm thick frosted one side sheet glass ordinary quality in square n exc 0.5 sqm each pane in new glazed shutter complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail 20 mm dia 'D' type, 60cm long between flanges complete all as specified and directed

S&Fin repair wash hand basin vitreous china (flat back) any size (450mm x 300mm) including cutting for and pinning in ends of brackets complete all as specified and directed.

S&F Steel ventilators with top hung shutter including hinges, steel peg stay complete all as specified and directed.

S&F in repair Curtain rod 25mm dia 0.80mm wall thickness, mild steel, chromium plated, powder coated as per sample complete all specified and directed.

S&F Brackets at suitable dead end for fixing 25mm dia curtain rods complete all as specified & directed.

S&F Brackets at suitable free end for fixing 25mm dia curtain rods complete all as specified and directed.

S & F MS framed work such as grills gratings etc. with ends of bars shouldeed and / or riveted, or forged into spikes; framed guard bars and similar works conforming to Fe 290 Gde - E- 165 including welding etc complete all as specified and directed.

S & F 1.6mm MS plain , black sheet in wall cladding steel gates and similar items cut to size , holes punched incl round headed screws, clouts nails or rivets fixed to steel framing including welding etc complete all as specified and directed.

M&L for preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot, washing etc. and applying one coat of white lime wash complete all as specified and directed.

M&L for preparation of plastered or unplastered old decorated surfaces of ceiling etc. incl pillasters and cornices etc. incl brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot, washing etc. and applying one coat of white lime wash complete all as specified and directed.

M&L preparation of newly plastered surface of walls over 10 cm width or girth over a coat of approved primer and applying two coat of oil emulsion distemper (tint as approved by GE) over a coat of primer complete all as specified and directed.

M&L for preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl washing, rubbing down and stoping the connected previously treated surfaces and applying one coat of oil emulsion distemper (tint as approved by GE) complete all as specified & directed.

Material & labour for preparation of old painted wood or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint (1st quality) complete all as specified & directed.

M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide or zinc chrome primer complete all as specified & directed.

Material & labour for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint (1st quality) complete all as specified & directed.

Material and labour for preparation of old painted steel or iron surfaces of any description n exc 10 cm width or girth and applying one cost of synthetic enamel paint of approved tint or shade complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls over 10 cm width of girth over a coat of approved primer and appling two coats of acrylic emulsion exterior quality (tint as approved by GE) as in plain pattern complete all as specified & directed.

M&L preparation of old/new surface of walls over 10 cm width or girth and applying two coat of oil emulsion distemper (tint as approved by GE) over a coat of primer complete all as specified and directed.

Preparation of old decorated surfaces of walls/roof projection/chajja including concrete (plastered or un plastered) by brooming down and scraping wherever necessary and apply one coats of external waterproof emulsion paint Apex Ultima or equivalent including necessary scaffolding required for painting work, safety measures complete all as specified and directed

M&L for preparation of old surfaces and applying 2 mm thick water proofing wall care putty or applying two coats of Damp proof chemical of Dr Fixit Surseal all as per manufacturer instructions (internal or external walls) complete all as specified and directed.

M&L for preparation of new walls surfaces and applying two coats of Damp proof chemical of Dr Fixit Surseal or equivalent all as per manufacturer instructions (internal or external walls) complete all as specified and directed.

M&L preparation of walls and applying two coats of Acrylic Elastometric Exterior waterproof decorative coating of Make Dr Fixit raincoat over a coat of primer of Make Dr Fixit Primeseal diluted with portable water by volume in 2:1 over old or plastered surface complete all as specified and directed. Make:Dr Fixit or equivalent

M&L for preparation of old plastered /concrete surfaces and applying two coats of Asian paints Smart care HYDRO LOC including cleaning the surface dust free complete all as specified and directed.

Material and labour for roof tiles Mangalore pattern interlocking at side joints, laid dry in roofing complete all as specified and as directed.

All as per serial item No.76.00 here-in-before but except tiles.

Material and labour for ridge or hip tiles to suit Manglore pattern of roofing tiles,bedded and jointed in cement mortar (1:6) etc complete all as specified and directed.

Supply and fix for 2nd class hardwood clean sawn tile battens, cross sectional area exc 5 and n.exc 15 Sqcm spaced at 30 cm centres to centres fixed with nails complete all as specified and as directed. (NOTE:Measurements shall be taken overall including both battens and spaces. Deductions shall be made only for openings exceeding 0.40sqm each).

All as per serial item No.79 here-in-before but except batten complete all as specified and directed.

Material and labour for 2nd class hard wood, clean sawn, in scantling timber work complete all as specified and directed.

All as per serial item No.81.00 here-in-before but except timber complete all as specified and directed.

Material and labour for preparation of battens, any size and spacing and treated all over (measured overall on one side only, spaces not deducted) with two coats of creosote oil complete all as specified and as directed.

M&L Fibre board Eves/ Weather Boarding 12 to 20mm thick or Feather Edged 15mm to 20mm thick and fixed with 30mm Lap, complete as approved arch pattern any size and shape including taking down existing boarding complete all as specified and as directed.Make: V-Board(Visaka Industries Ltd)/Everest and including necessary scaffolding required for maintance work, safety measures etc complete all as specified and directed

Supply and fix for 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 120gms/ Sqm complete all as specified and as directed.

All as per serial item No. 85.00 here-in-before but except sheeting. complete all as specified and directed.

Dismentling timber scantling of any size and position complete all as specified and directed.

Dismentling wooden battens of any description and any size spaced 30 cm C/C complete all as specified and directed.

Dismentling single layer mangalore pattern or similar tiles in roofing including ridge tiles and removing rubbish off the premises complete all as specified and directed.

S&F in repair galvanized mild steel wire cloth, 0.63mm nominal dia of wire and average width or aperture 1.40mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

M/S SHREE CONSTRUCTIONS

M/S OMSAI ENTERPRISES