Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.2 LAccepted-AOC | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹38.9 L+₹61,532.50 (1.61%)Rejected-Finance | L2 | Rejected-Finance Not being lowest |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
19 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Col Sachin Sharma CWE
Military Engineer Services, Commander Works Engineer, Udhampur, PO - Garhi, Udhampur-182121
SMART PERIODICAL SERVICES TO CERTAIN ACCN UNDER GE (NORTH) UDHAMPUR
2023_MES_595861_1
CWE/U(N)-29/2023-24
Open Tender
Civil Works
Item Rate
270 days
Udhampur
As per tender documents
7 documents required · 7 mandatory
₹500
GE (NORTH) UDHAMPUR
₹80,000
17 Jul 2023
16 May 2023
26 Jun 2023
16 May 2023
19 Jun 2023
1 Jun 2023
17 May 2023 - 27 May 2023
Amount
Removing existing paint by scrapping with TruCare Wall Sander : L-01/H-01 (having mechanical vacuum mechanism) or equivalent as recommended by the manufacturer and approved by the GE, having RPM not less than1500, sanding pad of 80 Grit having dia of 7”/9” to make the surface free from dust, loose paint etc. by skilled labour complete all as specified and as directed.
Providing and applying 1mm thick waterproof cement based putty @ 1Kg (undiluted) per Sqm of Asian Paints or its equivalent in Nerolac/Berger over the plastered / old painted wall after scrapping to prepare the surface even and smooth, complete all as specified and as directed. Step 1- Mix the putty powered by adding 40-50% water and mix it with Putty mixer (Trucare Putty mixer capacity of min 2.5 kg putty per minute). Step 2- Apply the first coat the prepared mixer with the help fully automatic airless spray machine of putty application of Asian Paints Trucare Graco spray Machine (Model: EH 230 DI) or equivalent as recommended by the manufacturer and approved by the GE, having DC electric motor of 3.3 KW having flow speed of max 6 ltrs per minutes with a maximum pressure 230 bar having maximum tip size 0.041” or by manually. Step 3- Allow 6-8 hrs time to dry the putty surface.
Sanding of the putty surface with Asian Paints TruCare wall sander: L-01/H-01 or equivalent in Berger/Nerolac (having mechanical vacuum mechanism) or equivalent as recommended by the manufacturer and approved by the GE, having RPM not less than 1500, sanding pad of 240 Grit or above having dia of 7”/9” to make the surface free from dust etc. by skilled labour, complete all as specified and as directed.
Providing and applying one coat of acrylic waterbased interior/exterior grade primer @ 0.8 ltr (undiluted)/10Sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalent as recommended by the manufacturer and approved by the GE, having an electric motor of min 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats, complete all as specified and as directed.
Providing and applying two coats of smooth acrylic emulsion with rich matt finish having voc less than 50 grams per ltr complying leed criteria @ 1 ltrs (undiluted)/10Sqm diluted with water in 2:1 ratio applied over priming coat with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalent as recommended by the manufacturer and approved by the GE, having an electric motor of min 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface in both the coats of paint, complete all as specified and as directed. Make : "Apex Ultima" of Asian Paint/"Weathercoat All Guard" of Berger Paints/Excel Total of Nerolac Paint
Note:- 1. (Applicable to Srl items No. 1 to 5 Here-in-above) At the time of uploading bids each tenderer shall upload a copy of MOU towards triparty agreement between tenderer, Manufacturer of Paints from Asian Paints/Berger Paints/Goodlass Nerolac Paints and their Applicators, for material and execution of work from any of the said manufacturers. Financial Bids of only those bidders shall be admitted whosoever shall upload a legitimate MOU. 2. Terms of the MOU so entered between tenderes, Applicators and Manufacturers mentioned above shall also cover the gaurantee from manufacturer of paints for any defect in work executed by their applicator for a period of 3 Years. All other aspects with regard to payment, execution of work or other legal points shall be solely as decided between the tenderer, Paint manufacturer & Applicator. Department shall in no way be responsible for any complicacy arising at a later stage between the parties to MOU with regard to payments or execution of work. 3. (Applicable to Srl items other than covered under Note 1 to 5 here-in-before). The necessary steel scaffolding upto G+3 storeyed wherever required to execute the work shall be provided by the contractor with all safety equipments and the cost of providing scaffolding & safety equipments shall be deemed to be included in the quoted rates of the contractor and nothing extra shall be admissible on this account. 4. The work shall be executed in restricted area and head loss etc. The contractors are advised to consider this aspect while quoting his rates. Nothing whatsoever on this account shall be admissible at later stage.
Preparation of new plastered surface of walls surface and applying two coat of plastic emulsion paint (Shade as approved by GE) over a coat of primer complete all as specified and directed.
Preparation of old painted surfaces of wood or wood based materials of any description over 10cm width or girth and applying one coat of synthetic enamel paint on wooden surfaces in multistoried bldgs, complete all as specified and as directed.
Preparation of surface and applying textured painting (granular or impression type), any colour and any position complete all as specified and directed by Engineer-in-Charge.
Preparation of old painted Steel surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Water proofing treatment to surfaces of walls / concrete slabs damaged due to moisture and efflorescence including sunken areas of bathrooms / toilets, in balconies by applying acrylic polymer modified cementitious high performance coating or treatment all as per manufacturer's instructions, complete all as specified and as directed.
Taking down cement plaster on brick or stone surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specifed.
15mm thick plastering in cement mortar 1:4 on fair faces of brick surfaces or concrete surfaces, surface finished even and smooth without using extra cementupto G+3 buildings including repairs of chajja, parapets and use of scafforlding/wire mesh where required, complete all as specified and as directed.
15mm thick plastering in cement mortar 1:6 on fair faces of brick surfaces or concrete surfaces, surface finished even and fair without using extra cement, complete all as specified.
20mm dia stainless steel fancy type tubular curtain rods with stainless steel heavy duty bracket fixed to wall with screws and gutties (PVC/wooden) and end bulb as per approved design, colour and pattern, complete all as specified and as directed.
18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified & directed.
Demolition of cement concrete in ground floors and paving not exceeding 15cm thickness (below or above ground level) un-reinforced and disposal of unserviceable materials, debris and rubbish to a distance 200m or under including loading, unloading and stacking, complete all as specified & directed.
50mm thick plain cement concrete 1:4:8, nominal mix, type D2, using 40mm graded crushed stone aggregate as in subbase, surface finished even and fair, complete all as specified.
Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified.
Brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan exc. 6m in mean radius, built in cement mortar 1:6, complete all as specified.
Venetian blinds of approved make, vertical type using 100mm wide fabric blinds of approved colour/ shade and pattern including operating arrangement such as chord/ thread, counter weight, connecting chain etc., and necessary fittings complete all as specified and directed.
Provn of wooden panelling on vertical surfaces of wall using following specification : (a) S&F wooden gutties 1st class hard wood of size 25mm x 25mm x 200mm depth fixed in wall by making holes in brick wall and making good in cement mortar 1:3. (b) S&F horizontal runners 2nd class soft wood (Kail) at 120 cm c/c of section area exc 13 Sqcm and not exc 25 Sqcm clean sawn treated with two coats of creosote Oil mixed with good quality Pesticide for antitermite treatment. (c) S&F 1st class soft wood (Deodar) boarding 12 to 15mm thick as in wall panelling planed one side, wrought on other side clean sawn with tongue/groove joints and applying two coats of good quality Varnish after proper preparing by sand paper etc. on planed surfaces and a coat of Primer mixed with pesticide for Antitermite treatment on the other side and fixed with screws/nails on wooden runners. (d) S&F 1st class soft wood (Deodar) decorative beading 40mm wide on top (and bottom if required) surface of wall panelling including two coats of Varnishing and including dismantling of old ceiling/wall panelling complete all as specified and as directed.
Roughening surfaces of old concrete surfaces by picking up, sweeping, cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @ 3 kg/Sqm including 15 mm thick screeding in CM (1:4) finished even and smooth mixed with water proofing compound (WPC shall be measured and paid separately). Applying bituminous primer conforming to IS-3384 @ 0.30kg/sqm, after drying of primer applying a coat of hot blown bitumen conforming to IS-702 @ 1.20 kg/sqm and layin polymeric water proofing membrane, five layerd with centre core of 90 micron high molecular density polythelene film (min weight 3kg per sqm) with end over laps not less than 150mm and side lap 75 mm and applying a coat of semi hot blown bitumen 85/25 grade @ 0.50kg/sqm and dusted over the bitumen coat and including two coats of bituminious aluminium paint complete all as specified and as directed by Engr-in- Charge.
Supply on Integral water proofing compound complete all as specified and as directed by Engr-in- Charge.
60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed by Engr-in-Charge.
Vitrified Dura stone tiles of size 300 x 300 x 10mm thick as in floors and over & including 15mm thick screed bed or bedding layer in cement mortar 1:6, including jointed with neat cement slurry and pointed in coloured cement to match the surface of tiles, complete all as specified and directed
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engr-in-Charge.
Light shade double charged vitrified tile 10 mm thick (Square / rectangular) polished , area of each tiles not exceeding 0.36 Sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed or beddding layer in cementy mortar 1:6 complete all as specifed and as directed.
Light shade double charged vitrified tile 10 mm thick (Square / rectangular) polished, area of each tiles exceeding 0.36 Sqm but n ext 1.0 Sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed or beddding layer in cementy mortar 1:6 complete all as specifed and as directed.
Light shade double charged vitrified tile 10 mm thick (Square / rectangular) polished , as in vertical surface/skirting set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm plaster in cementy mortar 1:4 complete all as specifed and as directed.
Glazed ceramic wall cladding tiles 300x450mm or 300x600mm on exterior wall surface design and size as approved by Engr in Charge as in vertical surfaces of walls, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm cement rendering in cement mortar 1:4 complete all as specified and as directed.
RAMAN CONSTRUCTION CO
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .