Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.2 LAdmitted-Finance | ₹5.2 L | L1 | Admitted-Finance |
| 2 | L2₹5.8 L+₹52,949.48 (10.1%)Admitted-Finance | ₹5.8 L+₹52,949.48 (10.1%) | L2 | Admitted-Finance |
| 3 | L3₹5.8 L+₹52,998.90 (10.1%)Admitted-Finance | ₹5.8 L+₹52,998.90 (10.1%) | L3 | Admitted-Finance |
| 4 | L4₹6.5 L+₹1.3 L (24.8%)Admitted-Finance | ₹6.5 L+₹1.3 L (24.8%) | L4 | Admitted-Finance |
| 5 | L5₹6.8 L+₹1.6 L (29.9%)Admitted-Finance | ₹6.8 L+₹1.6 L (29.9%) | L5 | Admitted-Finance |
| Sl No | Description | Qty | Unit | AJAY KUMAR SHUKLA L5 | MECHTEQ ENTERPRISES L2 | SELVAM RAJESH L4 | M/s AYUSH CONSTRUCTION L3 | JAY BHOLENATH UNEMPLOYED YOUTH CO OPERATIVE SOCIETY LTD L1 |
|---|---|---|---|---|---|---|---|---|
| 1.00Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge | ||||||||
| 1.01 | Extruded section profile size 48x40 mm | 5.2 | mtr | 1,350 ₹7,020 | 1,100 ₹5,720 Lowest | 2,500 ₹13,000 | 1,150 ₹5,980 | 1,200 ₹6,240 |
| 2.00Providing and fixing to existing door frames. | ||||||||
| 2.01 | 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. | 1.68 | Sqm | 11,500 ₹19,320 | 9,100 ₹15,288 | 4,500 ₹7,560 Lowest | 11,500 ₹19,320 | 5,000 ₹8,400 |
| 3.00Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. | ||||||||
| 3.01 | Size of Tile 600x600 mm | 30.6 | Sqm | 2,000 ₹61,200 | 2,000 ₹61,200 | 2,500 ₹76,500 | 1,900 ₹58,140 | 1,600 ₹48,960 Lowest |
| 4.00Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately). | ||||||||
| 4.01 | 6 mm thick Cement fiber board as per IS: 14862 | 136.23 | Sqm | 1,200 ₹1,63,476 | 880 ₹1,19,882.4 | 650 ₹88,549.5 Lowest | 900 ₹1,22,607 | 800 ₹1,08,984 |
| 5.00 | Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately). | 390.72 | Kg | 1,100 ₹4,29,789.8 | 960 ₹3,75,089.28 | 1,200 ₹4,68,861.6 | 950 ₹3,71,182.1 | 900 ₹3,51,646.2 Lowest |
Tender Value
₹7.7 L
EMD Value
₹15,447
Closing Date
21 Apr 2026, 3:00 pmClosed
Executive Engineer PRI NMA Mayabunder
Office of Executive Engineer PRI NMA Mayabunder
Repair and Maintenenace of Panchayat Bhawan (including doors, windows and roof etc) and Painting of Panchayat Bhawan under Gram Panchayat, Parnashala.
2026_RDPRI_22704_1
244/EE/PRI/NMA/MB/25-2026
Open Tender
Civil Works - Buildings
Works
60 days
Parnashala
Refer Tender Document
5 documents required · 5 mandatory
₹500
Executive Engineer PRI NMA Mayabunder
₹15,447
23 Apr 2026
15 Apr 2026
21 Apr 2026
15 Apr 2026
21 Apr 2026
15 Apr 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge | |||||
| 1.01 | Extruded section profile size 48x40 mm | - | mtr | - | - |
| 2Providing and fixing to existing door frames. | |||||
| 2.01 | 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. | 1 | Sqm | - | - |
| 3Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. | |||||
| 3.01 | Size of Tile 600x600 mm | - | Sqm | - | - |
| 4Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately). | |||||
| 4.01 | 6 mm thick Cement fiber board as per IS: 14862 | 1 | Sqm | - | - |
| 5 | Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately). | 0.2 | Kg | - | - |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.51 MB
Tenderdocument244.pdf
Tender Documents • 2.12 MB
BOQ_24054.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .