Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.3 LQualified 2 BAPUNAGAR JILLA GARDAN ROAD 80 FEET ROAD RAJKOT RAJKOT GUJARAT 360002 | RAJKOT | GUJARAT | 360002 | L1 | Qualified MII | |
| 2 | L2₹5.3 L+₹2,465 (0.47%)Qualified CHANDITALA II CHANDITALA II MANICK CHANDRA NATH VILL KHORAGORE PO KRISHNARA VILLAGE TOWN HOOGHLY CITY HOOGHLY | L2 | Qualified MII | |
| 3 | L3₹8.4 L+₹3.1 L (59.0%)Qualified 27 G 104 MANISH SINHA RAJA INDUSTRUIES 27G 104 SANJAY PLACE AGRA SANJAY PLACE AGRA AGRA UTTAR PRADESH 282005 | AGRA | UTTAR PRADESH | 282005 | L3 | Qualified MSE, MII, Category: General | |
| 4 | Disqualified | - | Disqualified MII |
Tender Value
Refer Docs
EMD Value
₹19,800
Closing Date
13 Jun 2025, 6:00 pmClosed
Slotted Weight for School Laboratory (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC)
Additional Doc 1 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled Yes RA Qualification Rule H1-Highest Priced Bid Elimination Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Bid Number ( ) : GEM/2025/B/6305576 Dated : 03-06-2025 Bid Document 1/6 Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Advisory Bank State Bank of India EMD Amount 19800 ePBG Detail Required No (a). EMD EXEMPTION: The bidder seeking EMD exemption
must submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category
only manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. (b). EMD & Performance securityshould be in favour of Beneficiary
wherever it is applicable.
Beneficiary : Dy. Manager Port Wing
NA
Jawaharlal Nehru Port Authority
Ministry of Ports
Shipping and Waterways (Sitaram Gangadhar Chavan) MII Purchase Preference MII Purchase Preference Yes MSE Purchase Preference MSE Purchase Preference Yes 1. Preference to Make In India products (For bids < 200 Crore):Preference shall be given to Class 1 local supplier as defined in public procurement (Preference to Make in India)
Order 2017 as amended from time to time and its subsequent Orders/Notifications issued by concerned Nodal Ministry for specific Goods/Products. The minimum local content to qualify as a Class 1 local supplier is denoted in the bid document. If the bidder wants to avail the 2/6 Purchase preference
the bidder must upload a certificate from the OEM regarding the percentage of the local content and the details of locations at which the local value addition is made along with their bid
failing which no purchase preference shall be granted. In case the bid value is more than Rs 10 Crore
the declaration relating to percentage of local content shall be certified by the statutory auditor or cost auditor
if the OEM is a company and by a practicing cost accountant or a chartered accountant for OEMs other than companies as per the Public Procurement (preference to Make-in -India) order 2017 dated 04.06.2020. Only Class-I and Class-II Local suppliers as per MII order dated 4.6.2020 will be eligible to bid. Non - Local suppliers as per MII order dated 04.06.2020 are not eligible to participate. However
eligible micro and small enterprises will be allowed to participate .The buyers are advised to refer the OM No.F.1/4/2021-PPD dated 18.05.2023. OM_No.1_4_2021_PPD_dated_18.05.2023 for compliance of Concurrent application of Public Procurement Policy for Micro and Small Enterprises Order
2012 and Public Procurement (Preference to Make in India) Order
2017. 2. Purchase preference will be given to MSEs having valid Udyam Registration and whose credentials are validated online through Udyam Registration portal as defined in Public Procurement Policy for Micro and Small Enterprises (MSEs) Order
2012 dated 23.03.2012 issued by Ministry of Micro
Small and Medium Enterprises and its subsequent Orders/Notifications issued by concerned Ministry. If the bidder wants to avail themselves of the Purchase preference
the bidder must be the manufacturer/OEM of the offered product on GeM. Traders are excluded from the purview of Public Procurement Policy for Micro and Small Enterprises and hence resellers offering products manufactured by some other OEM are not eligible for any purchase preference. In respect of bid for Services
the bidder must be the Service provider of the offered Service. Relevant documentary evidence in this regard shall be uploaded along with the bid in respect of the offered product or service and Buyer will decide eligibility for purchase preference based on documentary evidence submitted
while evaluating the bid. If L-1 is not an MSE and MSE Seller (s) has/have quoted price within L-1+ 15% (Selected by Buyer) of margin of purchase preference/price band defined in relevant policy
such MSE Seller shall be given opportunity to match L-1 price and contract will be awarded for 25% (selected by Buyer) percentage of total quantity. The buyers are advised to refer the OM No. F.1/4/2021-PPD dated 18.05.2023 OM_No.1_4_2021_PPD_dated_18.05.2023 for compliance of Concurrent application of Public Procurement Policy for Micro and Small Enterprises Order
2012 and Public Procurement (Preference to Make in India) Order
2017. Benefits of MSE will be allowed only if seller is validated on-line in GeM profile as well as validated and approved by Buyer after evaluation of documents submitted. 3. Reverse Auction would be conducted amongst all the technically qualified bidders except the Highest quoting bidder. The technically qualified Highest Quoting bidder will not be allowed to participate in RA. However
H-1 will also be allowed to participate in RA in following cases: i . If number of technically qualified bidders are only 2 or 3. ii . If Buyer has chosen to split the bid amongst N sellers
and H1 bid is coming within N. iii . In case Primary product of only one OEM is left in contention for participation in RA on elimination of H-1. iv . If L-1 is non-MSE and H-1 is eligible MSE and H-1 price is coming within price band of 15% of Non-MSE L-1 v . If L-1 is non-MII and H-1 is eligible MII and H-1 price is coming within price band of 20% of Non-MII L-1 Slotted Weight For School Laboratory ( 425 set ) (Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier respectively 1 2 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Bid Requirement (Allowed Values) Performance Parameters Slotted weight set Set of 10 Numbers weight (Nine weight of 1 grams + one number basic weight including hanger of 1gram. total weight =10 grams) Dimensional and Material Parameters Material of Weight Grey Cast Iron Packing Type of Case for Packing High QualityWooden Box 3/6 Additional Specification Parameters - Slotted Weight For School Laboratory ( 425 set ) Specification Parameter Name Bid Requirement (Allowed Values) Legal License Bidders shall submit valid copy of Legal License from Legal Metrology Department Applicable Standards/Acts As per Legal Metrology Act 2009 vide notification No .S.O.1(E) dated 31.12.2010
Gazett of India
Extraordinary
Part II
Sec. 3(ii) Fifth Schedule as amended upto date. Applicable clauses on Weights As per Legal Metrology Act 2009 vide notification No S O 1(E) dated 31 12 2010
Gazett of India
Extraordinary
Part II
Sec 3(ii) Fifth Schedule (Part I) B Stamping as per clause 10 Weight of each unit 20 Kgs. * Bidders offering must also comply with the additional specification parameters mentioned above. Consignees/Reporting Officer and Quantity S.No. .. .. Consignee Reporting/Officer Address Quantity Delivery Days 1 Abhay Khare 400707
Administration Building
Jawaharlal Nehru Port Authority
Sheva
Navi Mumbai 425 15 Buyer Added Bid Specific Terms and Conditions 1 . Generic OPTION CLAUSE: The Purchaser reserves the right to increase or decrease the quantity to be ordered up to 25 percent of bid quantity at the time of placement of contract. The purchaser also reserves the right to increase the ordered quantity up to 25% of the contracted quantity during the currency of the contract at the contracted rates. The delivery period of quantity shall commence from the last date of original delivery order and in cases where option clause is exercised during the extended delivery period the additional time shall commence from the last date of extended delivery period. The additional delivery time shall be (Increased quantity ÷ Original quantity) × Original delivery period (in days)
subject to minimum of 30 days. If the original delivery period is less than 30 days
the additional time equals the original delivery period. The Purchaser may extend this calculated delivery duration up to the original delivery period while exercising the option clause. Bidders must comply with these terms. 2 . Scope of Supply Scope of supply (Bid price to include all cost components) : Only supply of Goods 4/6 3 . Buyer Added Bid Specific ATC Buyer Added text based ATC clauses 1. Bidders should submit " Valid Copy of Legal License from Legal Metrology Department" alon g with their bids . Bids received without the same will not be considered for further evaluatio n. 2.
7923367
GEM/2025/B/6305576
Two Packet Bid
Slotted Weight for School Laboratory (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC)
GeM Contract
15 days
Khare400707Administration Building, Jawaharlal Nehru Port Authority, Sheva, Navi Mumbai
Total value wise evaluation
PRODUCT
Awarded to PRADIP FOUNDRY
₹5.3 L
| Product | Brand / Model | HSN | Quantity | Unit Price | Amount |
|---|---|---|---|---|---|
| Unbranded Grey Cast Iron High QualityWooden Box Slotted Weight for School Laboratory | NA / SLOTTED WEIGHTS | 8423 | 425 set | 1,245 | 529,125 |
2 documents required · 2 mandatory
₹19,800
15 Jul 2025
3 Jun 2025
13 Jun 2025
Unbranded Grey Cast Iron High QualityWooden Box Slotted Weight for School Laboratory | Brand:NA | Model:SLOTTED WEIGHTS | HSN:8423 | Qty:425 set | UnitPrice:1,245 | Amount:529,125
contract_GEMC-511687742762304.pdf
GEM_CONTRACT • 0.06 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
bid_7923367.pdf
GEM_BID
list-of-categories-where-trials-are-allowed_1712126171.pdf
OTHER
gtc.pdf
OTHER
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .