ADDN ALTN TO BLDG NO NP35 JCOS CLUB WITH ALLIED INFRA OF 1 FOD AND PROVN OF TOILET AT HQ OFFICE OF 1 FOD UNDER GE SOUTH UDHAMPUR

Amount

Surface excavation not exc 30 cm deep and averaging 15cm and getting in any type of soil complete all as specified and directed.

Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre in depth and getting out in Hard/dense soil all as specified and directed.

Returning, filling in trenches including spreading, leveling watering and well ramming in layers not exceeding 25cm all as directed.

Removing of surplus soil not exceeding 50 m and deposited where directed at a level not exceeding 1.50m above the starting point all as directed.

S& F coloured machine vibro mechenically floated glossy finish interlocking cement paver block,any shape and size confirming to IS 15658-2006 of 60mm thickness,M-35 Grade with,topping of cement mixed with imported pigment,colour and shape shall be approved by engr-in-charge ISI Marked.

M&L PCC 1:2:4 type B-1 using 20mm graded aggregate as in coping/benching complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specifed and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.60mm thick crimpted/tapard at the external end slo of any colour having tensile strength 550 Mpa as in roof covering fixed with self tapping screws and caps etc complete all as specified and directed

S & F plain galvalume aluminium zinc coating GI based plain steel sheet 0.63mm thick in ridges, hips, valley gutters at the external end slop of any colour having tansile strength 550 Mpa as in roof(ridges) covering fixed with self tapping screws and caps etc complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of gde Fe-410W (Gde E-250 quality), complete all as specified and directed by Engr-in-charge.

Dismantling wall and ceiling boards, fibre pulp insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed by Engr-in-charge.

S&F AC designer composite ceiling board 4-6mm thick in 600x600mm panel confirming to IS-14682 TYPE-B category-3 including GI frame, holdfast and suspenders complete all as specified and as directed by Engr-in-charge.

Demolition of brick/stone masonry incl all necessary arches, pillars,quions etc built in cement mortor complete all as specified.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc. 6.00m meanradius built in cement mortor 1:6, complete all as specified and as directed by Engr-in-charge.

M & L brick work with sub class 'B' bricks, straight or curved on plan exc. 6 mtr mean radius built in cement mortar 1:6 but (except bricks) complete all as specified and directed.

M&L half brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:4 all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and in paving exceeding 15 cm thickness (below or above ground level) complete all as specified.

Demolition of cement concrete (reinforced) as in roof, floors (other than ground floor), beams, staircase, landing, chajjas and similar suspended work,complete all as specified.

Demolition and breaking up 150mm dia SGSW/ AC or reinforced conerete pipes set in cement mortar and taking out of trenches complete all as specified and directed.

M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement complete all as specified.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing complete all as specified.

M&L Shingle filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled, and blinded with earth and rammed including watering complete all as specified.

M&L for hard core of broken stone of guage n.exc 63mm deposited spread and levelled in layer n.exc 15cm thick watered and well rammed to true surfaces as specified.

M&L for 75mm thick Plain cement concrete type B-2, 1:2:4 (40mm graded stone aggregate) finishing cement concrete surface even and smooth by using extra cement etc complete all as specified and as directed by Engr-in-charge.

25mm thick, Plain cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in sub base complete, all as specified.

M&L screed bed or bedding layer of mortar 10 mm thick for laying floor tiles in CM 1:4 all as specified.

M&L for Non skid coloured ceramic tiles (square/rectengular) 8 to 10 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified.

S&F digital vitrified ceramic tiles 8 -10 mm thick ( square / rectangular ) polished dark /light shade , doubble charged/ultracharged tile areaof each tilesn exc 0.36 sqm but n exc 0.42 Sqm in floors etc and jointed in neat cement slurry and pointed in white or coloured cement to match the work using dark shade complete all as specified.

M&L for 10 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4 as in backing coat to recieve tiles as in vertical surfaces and finished even and fair complete all as specified.

M&L for glazed coloured ceramic tiles in dado/vertical surface (300x600mmx 7mm or 300x450mmx7mm) thick set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 18-20 mm thick over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for screed bed or bedding layer of mortar 20mm thick in cement mortar 1:6 laying floor finishes complete all as specified.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified.

M & L rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces (using WPC @ 3% of wt of cement) finished even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for preparation of new surfaces and applying two coats of Cement base paint on walls over one coat of primer complete all as specified and as directed.

M&L for Rendering 10mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified.

M&L for 1mm thick wall care putty on internal and external wall complete all as specified and directed.

M&L two coat of Oil bound distemper including a coat of primer over a layer of birla white putty including preparation of newly plastered surfaces of wall, complete all as specified and as directed by Engr-in-charge.

Material and labour for 5 mm thick rendering in CM 1:3 on concrete ceiling surfaces including finishing even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge.

M&L for preparation of new plastered surfaces on ceiling and applying three coats of white wash.complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 40mm stone aggregate filling mass concrete in foundation, complete all as specified and as directed by Engr-in-charge.

Material and labour for providing Reinforced Cement Concrete M - 25 design Mix using 20 mm graded aggregate as in foundation including rafts, footings, foundation beams, plinth beams, bases of columns etc all as specified and directed.

Material and labour for providing Reinforced Cement Concrete M - 25 design Mix using 20 mm graded aggregate as in columns, pillars, piers, posts and struts all as specified and directed.

Reinforce cement concrete M-25 (20mm graded aggregates) design mix as in slabs supported on walls, beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed.

Material and labour for providing Reinforced Cement Concrete M - 25 design Mix using 20 mm graded aggregate as in beams, cantilever, lintels over 1.5 m all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not other wise specifically providedfor, complete all as specified and as directed by Engr-in-charge.

Material and labour for providing Reinforced Cement Concrete M - 25 design Mix using 20 mm graded aggregate as in Chajjas and like all as specified and directed.

Use of formwork to chullah hoods, chajjas,troughs and similar items including edges for rough flat finished surface of concrete, complete all as specifed and directed.

Use and waste formwork to sides of concrete foundation footings base of coloumns sides and soffits (if any) of foundation and plinth beams, and similar work vertical or to batter for rough finished flat surface of concrete all as specified and directed.

Use and waste formwork to sides of columns, pillars, posts, struts, piers and stanchions, rectangular or square for rough finished flat surfaces of concrete all as specified and as directed.

Use and waste formwork to sides and soffits of floor or roof beams, beam hunching, girders, lintels, cantlievers, shelves including supports, etc for rough finished flat surfaces of concrete all as specified and directed.

Formwork to soffits of suspended flat slabs such as roof slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete as per specified

Formwork to edges of concrete flats, treads breaks in floors, window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in wall, horizontal or sloping and similar work exc 10cm but n exc 20cm wide, complete all as specified and as directed by Engr-in-charge.

Material and labour for 10 mm dia and over TMT bars, cut to length bend to shape as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Material and labour for 6mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length bend to shape as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed by Engr-in-charge.

Providing of anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron., complete all as specified.

Anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors, complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 Square Metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt ), complete all as specified and directed by Engineer-in Charge.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed by Engineer-in Charge.

S&F glazed anodised (15 micron) powder coated Aluminium door made out of extruded section as standard door frame, single groove of size 100 x 45 x 2.5 mm th standard shutter top and bottom section of size 95 x 45 x 2.5mm th standard shutter vertical section of size 80 mm x 45 mm x 2.5 mm thick complete with auto hydraulic floor mounted door closer handle special cylindrical lock, neoprene dry set ,rubber gasket, with 12m th prelaminated (both side) particle board & 5mm th plain glass complete all as specified and as directed by Engr-in-charge.

S&F powder coated aluminium window side hung aluminium window/ ventilator frame or chowkats 1.5 mm thick aluminium anodized of size 65 mm x 40 mm and window shutter frames (sides rail, top rail, bottom rail and middle rail) 1.5 mm thick aluminium anodized of size 45 mm x 45 mm including all fitting such as rubber gasket aluminium glazing clips, locking arrangement and 75 mm aluminium handle and including 5mm thick tinted plain glass in panels fixed with rubber, gasket and aluminium beads, aluminium tower bolt 100 mm, aluminium butt hinges 75 mm 02 No in each shutter, complete all as specified and directed by Engineer-in-charge (Size of window shall be as sper site requirement.)

S&F powder coated aluminium window side hung aluminium window/ ventilator frame or chowkats 1.5 mm thick aluminium anodized of size 65 mm x 40 mm and window shutter frames (sides rail, top rail, bottom rail and middle rail) 1.5 mm thick aluminium anodized of size 45 mm x 45 mm including all fitting such as rubber gasket aluminium glazing clips, locking arrangement and 75 mm aluminium handle and including stainless wire cloth fixed with aluminium beads, aluminium tower bolt 100 mm, aluminium butt hinges 75 mm 02 No in each shutter, complete all as specified and directed by Engineer-in-charge (Size of window shall be as sper site requirement.)

S&F powder coated aluminium frame and grill for door, window,ventilators with one or more rebated incl jointing cleat for fixing etc complete all as spfd

S&F solid PVC moulded door frame of size 50mm x 47mm made out of 5mm both side Prelam PVC sheet used instead of plain colour PVC Sheet and edge will be painted to match with prelam sheet. reinforced with M.S. Square tube, in opening as per specifiecation and drawings complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 28 to 30mm thick style ,with 2,4 or 6 raised flush panel design with 2mm thick Moulded prelam PVC sheet on the front face & 2mm Prelam PVC sheet on back face all as specified and as directed.

S&F steel window (box type) with glazed shutter factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all specified. Note : (i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 (ii) MS fillets, glazing, wire gauge shall be measured and paid separately.

Description all as per Srl Item No.29 here in before but without glazing bar complete all as specified. Note : (i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 (ii) MS fillets, glazing, wire gauge shall be measured and paid separately.

S&F Factory made mild steel ventilators box type with upper top hung with glazed and gauged shutters and bottom openable,locking arrangements type shutters including pintol hinges,steel peg stay and one shop coat of red oxide primer complete all specified. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1302/2009 Sheet 1/3 to 3/3 ii) , Glazing, wire gauge and Glass shall be measured and paid for separately.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks,cup Board etc and similar work conforming to Fe 290 Gd E-165 complete all as specified.

M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified

M&L for factory made, 2nd class hard wood 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

M&L for providing cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified.

M&L for plain cement concrete (1:2:4) type B-2 using 40 mm graded stone aggregate as in benching, haunching of man holes,in surface channels and drains. complete all as specified and directed.

M & L for cement concrete 1:3:6 type C2 using 40 mm graded aggregate as in surface channels and drains complete all as specified and directed

S & F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing with grade Fe 410-W (Gde- E- 250)quality- A complete all as specified and as directed

M&L 18/19mm thick particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified and as directed.

0.90 mm thick decorative choice of lamination type 1 of surface finish, colour and pattern as approved, fixed with aproved adhesive as per manufactur's insturctions complete all as specified and directed.

Stainless steel curtain rails, 25mm dia with fixing brackets, stops, rollers etc. complete all as specified and directed by Engr-in-Charge.

Stainless Steel Hasp and staple size 100 mm with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F 100 mm butt hinges, medium weight ,stainless steel all as complete all as specified and directed.

S&F 150mm SS tower bolts with cast or sheet barrel and rolled or cast bolts of extruded section complete all as specified and directed. (ISI Mark)

S&F 150 mm Stainless steel handles, cast type polished bright complete all as specified and directed. (ISI Mark)

Aluminium body heavy duty double action floor spring suitable for glass shutter at both side rotable complete all as specified and directed.

M&L for preparation of wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified.

M&L for preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of zink chrome primer complete all as specified.

M&L of old steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint complete all as specified.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified.

S&F 4 mm thick figured glass (frosted) ,pin head type and glazing with oil putty not exc 0.50 Sqm in each pane fixing to window/ventilator complete all as specified and as directed.

S&F 250 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete, all as specified. (ISI Mark)

M&L for roughening surfaces of old concrete surfaces by picking, sweeping cleaning and washing down with water to remove dust etc including taking down tarfelt and 15 mm thick screeding in cement mortar 1:4 finished even and smooth without using extra cement mixed with water proofing compound as per manufacturer instructions (WPC shall be measured and paid separately), complete all as specified and as directed by Engr-in-charge.

Material and labour for 3mm thick APP based polymeric membrane minimum weighing 3 kg/sqm non-woven polyester reinforcement polymeric water proofing membrane (wt not less than 150 gms/sqm) laid on primed surfaces by gas flame torch application and apply one coat of industrial bitumen 85/25 grade at the rate of 1.20 Kg/Sqm over APP Memberence complete all as specified and as directed by the Engineer-in-Charge. Note :- Water proofing treatment will be done by IWL or through a specialized agency which will further have to give a five years warranty for rectification of any defect if incurred at a later stage, otherwise no payment shall be made to the contractor if water proofing treatment is executed by engaging local labour.

S&F in repair vitreous China wash basin, white, flat back , size 550x400mm excluding tap, chain, plug but including brackets, waste fitting 32mm dia ,brass chromimium plated for glazed ware sink, basin,with pedestal, long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified.

S&F vitreous china urinal, half stall type white (excluding flushing cistern, flush pipe ) but including PVC waste pipe , providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern trap and waste pipe) fixed in repair complete all as specified.

S&F 10 ltr capacity PVC valveless, syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connetion to pipe but fixed in repair complete all as specified and directed.

S&F brass hat peg solid body 125mm to 175mm long as per sample in repairs complete all as specified.

Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long as in repair complete all as specified and directed. Make : Jaquar, Cat Part No AQN -7771.

S&F in repairs Vitreous China wash down water closet pan “Pedestal pattern” size 580x440mm white (excluding flushing cistern and flush pipe) with CI ‘P or S’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes etc complete all as specified and directed.

S & F in repairs plastic water closet seat cover , white closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed

S/F in repair hand health faucet complete all as specified and as directed.

S&F in repairs flush pipe of polyethylene of low or high density, 32 mm dia for low level cistern including taking down old pipe, complete all as specified and directed.

S&F aluminium tubular towel rail, 20mm dia, D type, 60cm long between flanges aluminium anodized, fixed with rawl plugs. complete all as specified in repairs. (ISI Mark)

Dismantling water tanks capacity exc 500 ltrs & n'exc 1000 ltrs capacity, complete all as specified and as directed by Engr-in-charge.

S & F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer hoisted and fixed in position all as specified in SSR Part I

S&F in repair 15 mm bore bib taps, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified

S&F fancy type chromium plated stop valve cast copper alloy, screwed down, high pressure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions chromium plated of size 15 mm with long shank and cup (concealed type), complete all as specified and as directed by Engr-in-charge.

S&F in repairs 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F in repairs 20mm bore brass valve high pressure with polyethene float and fly nuts complete screwed for iron pipe or brass ferrule, complete all as specified and as directed by Engr-in-charge.

S& F angle valves, cast copper alloy,screwed down,high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair, for 15mm dia of pipe complete all as specified.

S&F in repairs SS Soap dish as specified and directed

S&F in repair PVC waste Pipe 32/40mm dia and fixed complete all as specified and directed

S&F in repairs for Shower roses 15 mm chromium plated with or without swivel joints, any size, including 125 mm long arm and fixing to steel pipe or union, complete all as specified.

S&F in repair PVC connection 15mm bore with ptmt nuts of length 600mm, complete all as specified and as directed by Engr-in-charge.

Taking up or down 15 mm bore steel tubing with connections for cleaning for refixing or removing to store yard complete all as specified

Taking up or down 20 mm bore steel tubing with connections for cleaning for refixing or removing to store yard complete all as specified

M & L 15 mm dia galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified.

M & L 20 mm dia galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified.

Dismantling cast iron pipe & reinforced concrete drain pipes, jointed in cement mortar of any dia taking out from trenches or fixed to wall upto 100mm complete all as specified.

S&F 100mm Cast iron soil sand cast pipes,waste and vent in any length withor without ears, with cement joints,laid in trenches or in floors complete all as specified and as directed.(ISI Marks).

S&F 75mm Cast iron soil sand cast pipes,waste and vent in any length withor without ears, with cemeent joints,laid in trenches or in floors complete all as specified and as directed.(ISI Marks)

S&F 75mm Cast iron soil sand cast pipes,waste and vent in any length withor without ears, with cemeent joints,fixed to wall complete all as specified and as directed.

S&F Salt glazed stone ware gully traps square or round mouthed, type P of size 150x150mm set and jointed to drain pipe with cement mortar (1:1) including demolition of old unserviceable gully traps complete all as specified (ISI Marks).

S&F Cast iron bends (any radius diminishing pieces or tapes (larger bore measured), 75mm bore fitted with oval access door fixed with rubber ring joints as in repairs complete all as specified and as directed.

S&F Cast iron bends (any radius diminishing pieces or tapes (larger bore measured), 100mm bore fitted with oval access door fixed with rubber rings joints as in repairs complete all as specified and as directed.

S&F 75mm Cast iron floor traps with grating including jointing to waste pipe fixed cncrete type B1 (1:2:4). complete all as specified and as directed.(ISI Mark)

S&F 75mm Cast iron cowls, complete all as specified and as directed by Engr-in-charge.

S & F 100mm cast iron sanitary connections- short connections pipe of length upto 300mm, complete all as specified and as directed by Engr-in-charge.

S&F Cast iron branch pieces, double (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches 75mm bore, fitted with oval access door, complete all as specified and as directed by Engr-in-charge.

S&F for 150 mm bore Salt-glazed stoneware drain pipes laid in trenches and jointed as specified.

M&L concrete bed to drain pipe incl packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) for 150mm bore pipe complete all as specified and directed.

Providing Precast cement concrete 1:2:4 type B-1 (20mm graded aggregate ) as in manholes cover slab etc all as specified and directed by Engr-in-charge.

Providing cement concrete 1:2:4 type B0 in steps, seismic and other similar bands, parapets and railings up to 60 cm in hieght, coping, kneeless apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles complete all as specified and directed.

M & L for 75 mm thick cement concrete 1:3:6 type C 2 (40 mm graded aggregate ) as in plinth protection, finished even and smooth without using extra cement complete all as specified and directed

S&F for mild steel ventilators (Box type) factory made with top hung shutters and bottom fixed type shutters incl pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded incl one shop coat of red oxide primer complete all as specified. Note : (i) The window shall be fabricated as per Drg CEUZ/TD/1269/2008 Sh 1/3 (ii) Glazing, wire gauge shall be measured and paid separately.

Supply and fix 4mm thick sheet glass, frosted or grounded on one side with rubber beading around the glass, in squares n exc 0.50 sqm, complete all as specified and as directed by Engr-in-charge.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube and fixed in opening as per specification and drawing complete all as specified.

S&F Factory made solid panel PVC Moulded door shutter 28 to 30mm thick stiles with 2,4 or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face and 2mm thick plain coloure PVC sheet on back face complete all as specification and drawing.

S&F aluminum handles cast type, anodised, 150 mm size complete all as specified .

S&F aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt complete all as specified .

M&L for 10 mm thick rendering in CM 1:3 on roof sufaces, finished even and smooth without using extra cement complete all as specified. Note :- Supply only water proofing compound shall be measured and paid seperately under the respective item.

S&F in Vitreous China wash down water closet pan “Pedestal pattern” size 580x440mm white (excluding flushing cistern and flush pipe) with PVC ‘P ’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes etc complete all as specified and directed.

S/F of hand health faucet complete all as specified and as directed by Engr-in-charge.

S&F Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed.

S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms), complete all as specified and as directed by Engr-in-charge.

S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms), complete all as specified and as directed by Engr-in-charge.

S&F for PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified and as directed by Engr-in-charge.

S&F for Angle valve, cast copper alloy fancy type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore complete all as specified.

S&F 15mm bore pillar tap cast copper alloy with capstan head chromium plated screwed down under high pressure with or without lettered hot or cold with long shank and fly nuts screwed for iron pipe, complete all as specified and as directed by Engr-in-charge.

S&F 32mm dia waste coupling of PTMT(half or full threaded) (Minimum weight 32mm ,45gms), completed all as specified.

S&F SS grating 100mm dia fixed to floor trap in repair, complete all as specified and as directed by Engr-in-charge.

S&F in repair PVC connection 15mm bore with ptmt nuts of length 450mm, complete all as specified and as directed by Engr-in-charge.

S& F 110 mm bore PVC SWR bends and fixed with joint sealent etc complete all specified and as directed

S&F 110mm PVC (SWR) pipes single/Double socketed of any length with rubber ring joints pressure rating 4 kg/cm2 fixed to wall incl clamp etc complete all as specifiedand as directed.

S&F stack clamps out of 50mm by 5mm flat iron and 6mm dia round iron stays,including bolts and nuts and securing ends of stays to wall or roof 100mm bore of pipe complete all as specified and as directed.

S&F for PVC (SWR) floor trap with dia of outlet 75mm with grating including jointing to waste pipe fixed in cement concrete PCC 1:2:4 type B-1 complete all as specified.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed by Engr-in-charge.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed by Engr-in-charge.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and as directed by Engr-in-charge.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls, complete all as specified and as directed by Engr-in-charge.

S&F 75 mm PVC (SWR) bends any radius, complete all as specified and as directed by Engr-in-charge.

S&F 110 mm PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and as directed by Engr-in-charge.

S&F 75 mm PVC (SWR) junction double, (double T), equal or unequal, complete all as specified and as directed by Engr-in-charge.

S&F for PVC (SWR) reducers, complete all as specified and as directed by Engr-in-charge.

S&F for 75 mm PVC (SWR) vent cowl, complete all as specified and as directed by Engr-in-charge.

Brick work with sub-class 'B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:4 complete all as specified and directed.

Removing excavated material (soils) exceeding 250 m but n.exc. 500m and depositing where directed at a level not exceeding 1.5m above the starting point., complete all as specified and as directed by Engr-in-charge.

M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, incl forms moulds, mitered/stopped ends etc complete all as specified and as directed.

S&F for 150 mm bore Salt-glazed stoneware drain pipes laid in trenches and jointed, complete all as specified and as directed by Engr-in-charge.

M&L for cement concrete 1:4:8 type D2 (40mm graded aggregate) in bed to 150 mm dia pipes including packing under, and haunching against the sides of pipes after they are laid and tested for complete all as specified.

Providing Precast cement concrete 1:2:4 type B-1 (20mm graded aggregate ) as in manholes cover slab etc all as specified and directed by Engr-in-charge.

Providing cement concrete 1:2:4 type B0 in steps, seismic and other similar bands, parapets and railings up to 60 cm in hieght, coping, kneeless apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles complete all as specified and directed.

S&F 10 ltr capacity PVC valveless, syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connetion to pipe complete all as specified and directed.

Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. Make : Jaquar, Cat Part No AQN -7771.

S & F plastic water closet seat cover , white closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed

M&L 25 mm thick Sand filling under floors or in foundations including watering and consolidation for laying of interlocking tiles complete all as specified and directed

M&L for preparation of new plastered surfaces on walls and applying three coats of white wash.complete all as specified and directed.

M&L for TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified.

M&L for preparation of new plastered surfaces on walls and applying three coats of white wash.complete all as specified and directed.

Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power) complete including fitting such as switch, sockets, ceiling rose, pendants socket,fan regulators any type, rectangular board ,light fittings,terminal boxes etc removing materials for taking credit and making good disturbed surfaces of walls floors and ceiling complete all as directed.

Point wiring for one light/ fan/bell/Exhaust point controlled by one switch using 1.5 Sq mm FRLSH copper conductor cables (multistanded) PVC insulated and unseathed in and including PVC concealed conduit as per site requirement (thickness not less than 1.4mm and 20mm dia), medium grade with Modular sunken boxes & PVC back plate for mounting modular type switches, sockets & regulators etc with front plate modular type including supplying and laying PVC insulated unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire stranded and conected to earth dolly as specified.Make: Havells/ Finolex/ Polycab.

Point wiring for socket outlet independent board 4.0 Sq mm FRLSH copper conductor cables (multistanded) PVC insulated and unseathed in and including PVC concealed conduit as per site requirement (thickness not less than 1.4mm and 20mm dia), medium grade with Modular sunken boxes & PVC back plate for mounting modular type switches, sockets & regulators etc with front plate modular type including supplying and laying PVC insulated unsheathed 1100 volts coppper conductor cable 4.0 Sq mm as earth wire stranded and conected to earth dolly as specified.(2x4.0 sq. mm +1x4.0 sq. mm earth wire for AC and Geyser) Make: Havells/ Finolex/ Polycab.

Sheet metal enclosure Single pole & neutral with 2 pin and earth plug and socket 20A 240 complete with one single pole MCB of any cap from 10 to 20 A complete all as specified and directed. Make:Legrand/Havell crabtree/L &T/ Schneider

All as per srl item No 182 but for 3 pin 6 Amps socket outlet independent board including PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly. Make: Havells/ Finolex/ Polycab.

All as per srl item No 182 but for 3 pin 6 Amps socket outlet on the same board including PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly. Make: Havells/ Finolex/ Polycab.

All as per Srl item No 182 but for 3 Pin 16 Amps socket outlet independent board with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire standard and connected to earth dolly. Make: Havells/ Finolex/ Polycab.

All as per item no 182 above but cable 2.5 sqmm FRLSH for one 5 pin 5 Amp socket outlet point on an independent board.Make: Havells/ Finolex/ Polycab.

S&F for modular switch 6 Amps single pole one way 230 V, 50 Hz, AC , with outer strip complete all as specified and directed by Engr In charge. Make:Legrand/Havell crabtree/L &T/ Schneider

S&F for modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with outer strip complete all as specified and directed by Engr In charge. Make:Legrand/Havell crabtree/L &T/ Schneider

S&F for modular socket 3 Pin 6 Amps flush type 230 V, 50 Hz, AC , with outer/inner cover complete all as specified and directed by Engr In charge. Make:Legrand/Havell crabtree/L &T/ Schneider

S&F for modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush type with outer/inner cover complete all as specified and directed by Engr In charge.Make:Legrand/Havell crabtree/L &T/ Schneider

M &L Ceiling rose, surface bakelite 65x 50mm two to three terminals fixed on PVC Round Block complete all as specified and directed by Engr In charge.

VTPN MCCB DB Double Door (Including 100 Amp MCCB) 16 kA(as Incommer) 4 way double door complete with appropriate size bus bar, neutral link and Earth Bar fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.Make: L&T/ C&S/CG/ Schenider/ Legrand.

S&F Sheet metal enclosure double door type for DBs 12 way 240 volts with 200 Amps rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.Make: L&T/ C&S/CG/ Schenider/ Legrand.

S&F Sheet metal enclosure double door type for DBs 8 way 240 volts with suitable rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.Make: L&T/ C&S/CG/ Schenider/ Legrand.

S & F MCB single pole 240 volt any rating from 06 to 32 amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable, complete all as specified and as directed by Engr-in-charge.Make: L&T/ C&S/CG/ Schenider/ Legrand.

S & F MCB single pole and neutral 240 volt any rating from 63 Amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable, complete all as specified and as directed by Engr-in-charge. Make: L&T/ C&S/CG/ Schenider/ Legrand.

Earthing complete with galvanized steel earth plate electrodes 600 mmx600 mm x6 mm thick buried directly in ground earth plate not less than 2.25 m deep below normal ground level with top edge of the plate not less than 1.5 m below normal ground level connected to and including galvanized steel earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel including PCC pit in PCC 1:2:4 type B-1using 20 mm graded crushed stone aggregate, RCC frame with 40mm thick RCC cover reinforced with 8mm dia deformed bars handle. including excavation and earth work in any type of soil medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade GI protection pipe 15mm bore main board complete all as shown in electrical plate No 5 connected to main control board all as specified and testing on completion. Note: Excavation earthwork charcoal PCC pit is covered under this item including taking out existing earth plate etc.

S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 6 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 6 Sq mm as earth lead (2x6.0 sq. mm + 1x6.0 sq. mm earth wire ) complete all as specified and as directed (for VTPN DB to SPN DB) Make: Havells/ Finolex/ Polycab.

S&F electric water heater, storage type with steel inner tank and heating element upto 2 KW capacity 25 Ltr, BEE 5 star rated complete with all accessories such as safety valve, thermostate , NRV, connection piece etc complete all as specified and directed by Engr-in-Charge.Make: Bajaj/Havells/Crompton/A O Smith

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engr-in-charge. MAKE : Philips/Syska/Havells/Bajaj

Supply and fixing LED lights fitting 1x 20W, 230V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by Engr-in-charge. MAKE : Philips/Syska/Havells/Bajaj

Supply and fixing LED building security light fitting with including bracket 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp,clamps,suitable bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed by Engr-in-charge. MAKE : Philips/Syska/Havells/Bajaj

Supply and fixing LED luminaire 600mmX600mm 35/36 watt 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holder and LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable cases of suitable size complete all as specified and as directed by Engr-in-charge. MAKE : Philips/Syska/Havells/Bajaj

S&F Venza decorative wall mounting light fitting, SS finish fixture with opal glass diffuser including 12W retrofit LED bulb and making all connection using flexible cable of suitable size from ceiling rose to fitting complete all as specified and as directed. MAKE : Philips/Syska/Havells/Bajaj

Taking down/Refixing of ceiling/wall LED light fittings any type/ any wattage connected with 3 core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer-in-Charge.

S&F Modular electronic step type fan regulator(modular type) 100 watt 230 volts 50Hz two module C/S deluxe type complete all as specified and directed.Make:Legrand/Havell crabtree/L &T/ Schneider

Supply & fix BLDC ceiling fan complete with accessories, blades, down rods, canopy, shackle assy, and 230 V, AC, 50 Hz, 1200mm sweep. Min air delivery 210 CFM with service value ≥ 6.00 BEE. Five star rated with burshless direct current motor (BLDC) all as specified & directed by Engr-in-charge. Make : Bajaj/Khaitan/Orient

Supply & fix exhaust fan, steel body, AC single phase 230 volts heavy duty of size 450mm sweep with blades, frame, louvers and all fixing arrangements as all as specified & directed by Engr-in-charge.Make : Bajaj/Khaitan/Orient/Havells

Taking down/Refixing of wall fan Double String any size complete with louver including grounting of nut bolts and provision of cable from ceiling rose to fan, for fixing of wall Fan Complete all as specified and direceted by Engr-in-charge.

S&F Wall fans complete with accessories, AC single phase 50 Hz 230 volts of size 400mm sweep blades, frame and louvers including grounting of nut bolts for fixing of wall Fan Complete all as specified and direceted by Engr-in-charge. Make : Bajaj/Khaitan/Orient/Havells

Supply , Laying, Testing and commissioning in trenches or passing through pipe, 1100 volts grade heavy duty cable with "XLPE" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 25 Sqmm x 4 core size all as specified. Make: Havells/ Finolex/ Polycab.

S&F Double Walled corrugated DWC Pipe of size 40 mm including snap fit coupler Pt-II for protection of LT Cable in underground complete all as specified and as directed by Engr-in-charge.

Supply and fixing GI tubing light grade 40 mm dia along the wall/ in trenches/ in duct / in culvert /road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holding of GI pipe alongwith poles all as specified and directed.

S & F in replacement MCB single pole 240 volt any rating from 06 to 32 amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable, complete all as specified and as directed by Engr-in-charge. Make: L&T/ C&S/CG/ Schenider/ Legrand.

S & F in replacement MCB single pole and neutral 240 volt any rating upto 32 Amp "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable, complete all as specified and as directed by Engr-in-charge. Make: L&T/ C&S/CG/ Schenider/ Legrand.

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitablesize, complete all as specified and as directed by Engr-in-charge. MAKE : Philips/Syska/Havells/Bajaj

Supply & Laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with "XLPE" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 10 Sqmm x 2 core size all as specified including taking down old cable. Note : Earth work and other connected work shall be measured & paid sperately, complete all as specified and as directed by Engr-in-charge. Make: Havells/ Finolex/ Polycab.

S&F Double Walled corrugated DWC Pipe of size 40 mm including snap fit coupler Pt-II for protection of LT Cable in underground complete all as specified and as directed by Engr-in-charge.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers all as specified and directed by Engg-in-Charge Make : Bajaj/Khaitan/Orient/Havells

MAHADEV ENTERPRISES (BID ID -3357411)

anil construction co. (BID ID -3361836)

VIRINDER SINGH (BID ID -3362149)

JOGINDER SINGH (BID ID -3362520)

M/S R S Builders (BID ID -3355929)

PARDEEP SHARMA (BID ID -3362315)

vmd traders (BID ID -3361959)