Civil repair and maintenance works at Kaveri Guest House, Bengaluru

Providing, supplying, cutting, welding, fabricating, hoisting and fixing in position structural steel members like trusses, purlins, posts etc. using MS hollow / circular / square / rectangular tubular sections including applying a coat of Zinc chromate primer of approved make all as per specifications, drawings and as directed by the Engineer in charge

Providing and fixing hand rail using 304 grade Stainless Steel pipes of approved size and make and quality by welding, mirror /matt polishing, fixing at site etc. for balcony railing & staircasesrailing including special sections as per drawings, specifications. complete as directed by the Engineer-in-charge

Providing and fixing precoated Galvalume Roofing profile sheets of approved size, shape and pitch up to and including single length of 12.00 met. The sheet shall be fixed using self drilling / self tapping screws of size (5.5 X 55 mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white lead complete upto any pitch in horizontal / vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as directed by the Engineer-in-charge Galvalume sheet roofing 0.50 mm Thickness in Single sheet

Providing and Painting two coats of synthetic enamel paint on Steel Surfaces of approved brand and manufacture to give an even shade without primer coat. Including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge. Note.: The existing paint has to be removed by the contractor before applying new paint/primer. Contractor has to quote his rate inclusive of cost of removal of existing paint.

Providing and Painting two coats of synthetic enamel paint on steel surfaces of approved brand and manufacture to give an even shade over a primer coat. Including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge. Note.: The existing paint has to be removed by the contractor before applying new paint/primer. Contractor has to quote his rate inclusive of cost of removal of existing paint.

Dismantling old plaster / skirting carefully , raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 100 m lead

Dismantling brick work in Cement mortar carefully without damaging adjacent structures including stacking of materials and disposal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismantling and stacking within 100 m lead.

Providing and fixing IS:12817 marked stainless steel butt hinges of size 125 x 64 x 2.5 mm (heavy weight) of approved make with suitable stainless steel screws etc. complete as directed by the Engineer-in-charge

Providing and Refixing Glazed VITRIFIED floor tiles of approved make in different sizes conforming to IS 15622 in all colours and shades in Glossy or Matt or satin finish laid over a bed of minimum 20 mm thick bed of cement mortar 1:4 (using Crushed sand) and jointing with grey cement slurry including grouting with the joints with white cement based Tile Grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Engineer-in-charge

Providing 20 mm thick External plastering in two coats under layer 12 mm thick with C.M 1:4 (using crushed sand) finished with a top layer 8 mm thick in C. M 1:3 (using crushed sand) including approved water proofing compound @ 2% by weight of cement or as per manufacturer's specifications, sieving of sand to required fineness, scaffolding up to 10 metres height, finishing, curing etc. complete as per specifications. and as directed by the Engineer-incharge

Providing 12 mm thick Internal plastering in cement mortar 1:4 without cement punning (using crushed sand) finished smooth, including sieving of sand to required fineness, preparation of the surface, scaffolding, curing all as per specifications, drawings and as directed at site complete.

Providing FLUSH pointing on stone masonry with cement mortar 1:3 using crushed sand as per specifications and as directed at site by the Engineer-in-charge.

Providing and grouting the joints of rubble stone pitching with cement mortar 1:3 and pointing the surfaces as directed complete as directed by the Engineer-in-charge

Providing and refixing 150 mm x 150 mm cast iron grating for rain water down takes at roof including chipping and grouting complete all as directed by the Engineer-in-charge

Providing and refixing Glazed VITRIFIED floor tiles of approved make in different sizes conforming to IS 15622 in all colours and shades in Glossy or Matt or satin finish laid over a bed of minimum 20 mm thick bed of cement mortar 1:4 (using Crushed sand) and jointing with grey cement slurry including grouting with the joints with white cement based Tile Grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Engineer-in-charge using Tiles of size above 600x 600mm and up to and including 900 x 900mm

Providing and applying white cement based wall putty of approved make over concrete or Plastered surface up to 3 mm thick to get uniform surface free from undulation including cleaning complete all as directed by the Engineer-in-charge

Providing and painting One coat on old work with 1st quality acrylic washable distemper (ready made) of approved make and of required shade and colour complete, as per manufacturer's specification, including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in charge.

Providing and painting old walls (TWO coats) over existing cement paint surface on plain / sand face plaster & concrete surfaces with premium acrylic smooth exterior paint of approved make, required shade, including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge.

Providing and refixing PVC rain water pipes conforming to relevant IS type B and PVC SWR fittings & specials conforming to relevant IS including jointing with seal ring / With PVC solvent adhesive including fixing in walls using clamps etc complete all as per drawings, specifications and as directed by the Engineer-in-charge. SWR PIPE 110 mm O/D

15 mm dia bib cock of approved type and make .

15 mm Dia LONG BODY bib cock of approved type and make

Providing and refixing C.P brass concealed stop cock of Heavy Quality of specified / approved make as per specifications and as directed by the Engineer-in-charge 15 mm n.b CP brass concealed stop cock of approved make

Providing and refixing C.P brass Angle cock of heavy quality of specified / approved make, for wash basin inlet / flush cistern etc. as per specifications and as directed by the Engineer-in-charge 15 mm n.b CP brass Angle cock of approved make

Providing and refixing 15 mm C.P brass 2 in 1 bib cock and Angle cock combination of Heavy Quality of approved make as per specifications and as directed by the Engineer-in-charge

Providing and refixing 15 mm C.P brass pillar cock of heavy Quality of approved make and specied type as per specifications and as directed by the Engineer-in-charge.

Providing and refixing Heavy Quality 15 mm C.P brass swan neck pillar cock of approved make as per specifications and as directed by the Engineer-in-charge.

Providing and refixing heavy quality health faucet with 1.50 metres long flexible hose (hand shower) of approved make with wall brackets and type as per specifications and as directed by the Engineer-in-charge

Providing and refixing heavy quality 15 mm urinal flush cock of approved make

Providing and refixing heavy quality CP brass bottle trap 31 / 32 mm of approved make single piece moulded with height of 270mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal, of approved make for wash basins / urinal etc all as per specifications and directed by the Engineer in charge.

Providing and refixing PVC low level / high level flushing cistern 10 litre capacity of approved make in white colour with flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures etc. complete as per specifications and as directed by the Engineer-in-charge.

Removing the following sizes of damaged G.I fittings from G.I pipe lines, replacing the damaged fittings with new fittings, testing for leakage etc. complete as per specifications and as directed by the Engineer-in-charge, 50 mm G.I elbow, bend, nipple, socket tee, socket

Providing and refixing viterious China wash basin of approved make and colour with C.I. brackets, 15 m C.P. brass pillar tap of approved make,15 mm x 600mm long PVC Inlet connection, 32 mm heavy quality C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls and testing complete all as per specifications and as directed by the Engineer-in-charge , White vitreous China wash basin size 630 x4 450 mm and equivalent sizes with single 15 mm C.P. brass pillar tap

Providing and fixing anodised aluminium tower bolts of size 300 X 12 mm (barrel type) ISI marked of approved make transparent or dyed to requried colour or shade with necessary screws etc.all as per specifications and as per drawings.

Providing, applying and finishing walls with two coats of premium fine textured exerior paint of required shade over new work including base coat of water proof cement paint, preparation of the surfaces, scaffolding complete as per specifications and as directed by the Engineer-in-charge On Plain plastered / concrete sufaces

Providing and fixing Minimum 17 mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut Granite of Jet Black colour for kitchen platforms, vanitiy counters, wash basin counters, door frames, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edges to give high gloss finish etc. complete at all levels

Providing and fixing brass mortise latch and lock of approved make with 6 levers and a pair of lever Brass handles with necessary screws etc complete suitable for fixing in wooden / steel/ FRP/ doors as per specifications.

Providing, hoisting and installing at required elevation moulded HDPE cylindrical vertical water storage tanks of approved make of the following capacities with WHITE SILICON coated and with suitable S. M. C cover at top including the cost of labour for making hole in the storage tank for inlet, outlet, scour and overflow, providing and fixing necessary G.I nipples ranging from 15 mm to 50 nn n.b of average150 mm length with double check nuts,washers etc. complete as directed by the Engineer-in-charge HDPE CYLINDRICAL vertical storage water tank white silicon coated 5000 lit capacity

Repair and Maintances of DEWATS system consisting of

Repair of Sand carbon filter for Sewage Treatment Plant (STP) of DEWATS type, including supply and placement/replacement of the filter media, supply and replacement of UPVC pipes, supply and replacement of Non-return valves and Multi port valves and any other incidentals required for functioning of sand carbon filters. Rate quoted shall be including of all materials, transport and labour charges and no extra amount shall be payable over and above

Monthly Sampling and Analysis of the treated wastewater for ensuring the system meets the discharge standards prescribed by the Karnataka State Pollution Control Board (KSPCB). For this: i) Wastewater samples shall be collected once every month from the outlet of the DEWATS system. ii) Analysis shall include key parameters such as pH, COD, BOD, TSS, TN, TP, Faecal Coliform and other relevant indicators prescribed by KSPCB. iii) Submission of comprehensive water quality reports to BARC every month, outlining results and observations indicating the required desirable quality as per KSPCB norms. Note: Testing shall be carried out in NABL accredited laboratories or laboratories approved by KSPCB or CPCB only. Quoted rate shall include all activities required for completion of scope of work and no additional amount will be payable over and above the amount quoted

Technical supervision for operation of STP, including i) Deploying technical personnel to site for periodic evaluation and inspection of STP ii) Carrying out inspections for identification of any operational issues. Submission of report to BARC mentioning the issues and recommended solutions for correction of issues. iii) Carrying out minor repair works if required, as a part of preventive maintence to prevent loss of functionality.

SPIDER FAÇADE GLAZING: Supply and replacement of damaged laminated DGU glass 26mm thk (6mm performance glass HS+1.52 DG 40 laminate +8mm clear toughened glass) side edges polished including dismantling of existing glass. Quoted rate includes dismantling of existing glass, supply and installation of new glass panel incuding labour, scaffolding arrangements etc. required for completion of work to the satisfaction of Engineer-in-Charge