ARMO of LWSS Purag in GP Purag Tehsil Kotkhai Distt Shimla HP

Amount

Excavation in foundation & trenches etc. in earth work for pipes up to all depths in all classification of earthwork such as pick work, jumper work, saturated soil including bailing or pumping out water, blasting soft/hard rock or chiseling soft / hard rock where blasting is prohibited in all lifts including jungle clearance wherever required, trimming & dressing of sides, leveling of beds to correct grade including shoring/struting, planking, timbering & dewatering wherever required stacking the useable/unuseable material/soil seperately & after laying, jointing & testing of pipes, returning the useable soil in trenches in 15 cm layers including consolidating of such deposited ayer by ramming & watering & then disposing of all surplus excavated soil/unuseable material as directed with in all leads & lifts including restoration of un-metalled surfaces to its original condition & including cost of diversion for traffic, night signals, fixing caution boards, crossing over trenches for access to houses,fencing etc.complete in all respects in all leads & lifts as per directions of the Engineer Incharge

Laying jointing and testing of GMS pipe conforming to IS 1239-1991 (part-l) of various thickness as mentioned and grade designation with bevelled edge and capable of withstanding required testing pressure in random length of 5.5-65 meters i/c testing and commissioning and cost of jointing with buttwelding as per revant BIS specification ( leak proof) including cost of bends tail pieces, tees reducers increasers etc. as per site requirement and as per directio of the Engineer-in-charge, earth work in trencher to be measured and paid for separately i/c all leads lifts and carriage of materials at site.

GI (Heavy Class) 40mm Wall Thickness 4.00mm

Welding and fixing M.S. plate flanges of various dia (nominal bore) of following Flange Tables confirming to IS 6392-1971 or latest with up to date ammendments to ERW after 100 mtr. pipe or as per site requirement including cutting of of pipes wherever required, welding in three layers (leak proof) confirming to specifications as prescribed in relvent I.S. Code Li.e. IS 816-1969 with electrode as per IS: 814-1991 or latest as applicable with up to date ammendments with nuts, bolts & washers & specials etc. confirming to IS-1963 or latest with up to date ammendments including packing sheet i.e. asbestos fibre sheet minimum 3mm thick and painting with anticorosive paints complete in all respect in all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

40mm Dia. Pipes Flenge Table 28

Carriage & errection of of 20HP Submersible Pumping Machinery alongwith push button starter includng welding & fixing complete in all respect in all eads, lifts and carriage of material at site and as directed by the Engineer Incharge. 20 HP

Providing and Fixing of Cast steel sluice valve of Kirloskar/Leader & equivalent make as per BS 1414/ API 600 as per the direction of Engineer-in-Charge.

Providing and Fixing of Cast steel Reflux valve as per BS 1868/ API 600 as per the direction of Engineer-in-Charge.

Providing, welding and fixing M.S. plate flanges of various dia (nominal bore) of following Flange Tables confirming to IS 6392-1971 or latest with up to date ammendments to ERW after 100 mtr. pipe or as per site requirement including cutting of of pipes wherever required, welding in three layers (leak proof) confirming to specifications as prescribed in relvent I.S. 1963 or latest with up to date ammendments including packing sheet i.e asbestos fibre sheet minimum 3mm thick and painting with anticorosive paints complete in all respect all leads lifts and carriage of materials at site. and as directed by the Engineer Incharge.

40mm dia pipes flenges table 28

P/F of copper armoured 3 core cable for pannel board & motor as per ISI specification complete in all respects. (16 Sqmm)

Providing and laying cement concrete work 1:3:6(1 cement: approved sand: approved graded stone aggregate 40mm nominal size) & curing complete excluding cost of form work in foundation and plinth with in all leads and lifts.

Providing form work with steel plate 3. 15mm thick welded with angle iron frame 30x30x5mmso as give a fair finish i/c centring, shuttering, & centring below supporting floor to ceiling not exceeding 4mtrs. & removal of the same for in-situ reinforced concrete & plain concrete work in:

Vertical surface such as wallany thickness) partitions and the like including attached pillasters, buttresses, plinth and string cources and the like within all leads and lifts

Providing mild steel/tor steel for RCC work including bending binding and placing in position complete upto floor two level within all leads and lifts.

Providing and laying cement concrete concrete work 1:1.5:3 (1 cement: 1.5 sand: 3 graded stone agg. 20mm nominal size) and curing complete excluding cost of form work and reinforment for reinforced concrete Columns, pillar posts and struts upto floor two level

HEM LATA (BID ID -555475)