PROVN OF COVERED SHED IN DRILL GROUND AT DRC UNDER AGE BR I AT FAIZABAD

Amount

Excavation in trenches n. exc 1.5 m wide and n exc. 1.5 m depth, for foundations, etc or for shafts, wells, manholes, pier holes or similar works n.exc 10 sqm on plan and getting out in soft/loose soil, complete all as specified .

M&L for cement concrete type C-2 , 1:3:6 (using 40 mm graded crushed stone aggregate ) in foundations, filling and mass concrete, complete all as specified.

M&L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240, complete all as specified.

S&F in position pre painted galvalume aluminium zinc coating GI based plain sheet 0.50mm thick of any colour (as approved ) having tensile strength of 550 Mpa , as in roof , wall cladding, north light curves, valley gutter, ridge etc, LLoydeck or equivellent as approved profile having creast depth 28 to 30mm at a pitch of 195-250mm and having two ribs in between for additional strength fixed with zinc coated shelf drilling fastner including EPDM washer complete laid with one side lap and main 150mm end laps laid to stop all as per manufacture / profile maker instruction complete all as specified .

S&F mild steel flat iron ( size as approved) as in wind ties for securing truss including securing bolts , complete all as specified.

S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and counter sunk for screw including bending and welding angles , as necessary , gusset plate riveting, etc, n. exc. 10 Kg each brackets conforming to Fe 290, Gde 165 ( Brackets over 10 kg each to be measured under structural steel) , complete all as specified ..

S&F framed work such as grills grating etc with ends of bar sholudered or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing and similar work conforming to FE-290, Gde-E-165 complete all as specifed .

S&F 25mm dia of neck mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarges and jagged or lewished exc 30 cm long complete all as specified.

M&L for preparation of surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer on steel surfaces, complete all as specified .

M&L for Aluminium composite panel sheet 3mm thick for ceiling, of the tray panel screw type system with aluminium composite panel of approved colour on exterior walls, ACP Soffits, coping, slab, projections at all heights and elevation including necesary aluminium framework, complete all as specified.

M&L for old size Brickwork with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6, complete all as specified.

Demolition of Cement Concrete (unreinforced) in ground floor and paving n.exc 15cm thickness (below or above ground level) ,complete all as specified and remving rubbish off the primises.

Taking down cement plaster on Brick or concrete surfaces including racking out joints hacking for key scrubbing down with water etc complete all as specified including the removal of rubbish off the primises.

M&L PCC , 1:4:8 type D-2 using 40 mm graded aggregate stone aggregate 75 mm thick as in sub base , complete all as specified.

M&L screed bed or bedding layer of cement mortar 20mm thick in CM 1:3 for laying floor finishes to receive kota stone , complete all as specified.

M&L 10mm thick screeding bed on backing of verticles kota stone in CM 1:3 , complete all as specified.

M&L Kota stone slab flooring 20-25mm thick pre machine cut and polished at site after fixing (Granite finish), over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified .( Screed bed shall be measured and paid seperatly)

M&L Kota stone slab 20-25mm thick pre machine cut and polished at site after fixing (Granite finish) as in riser of steps, skirting, dado and pillar etc laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab, complete all as specified .

M&L 18-20mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite , complete all as specified.

M & L rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finishing even and smooth without using extra cement , complete all as specified.

Preparation of newly plastered wall surfaces and applying two coat of cement base paint , complete all as specified.

Removal of surplus soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified .

Sai Ram Associates

M/s SHIVAM CONSTRUCTIONS

Matrubhoomi Construction

MOHAMMAD RIZWAN CONTRACTOR

Vibha Enterprises

K R KAUSHAL AND SONS

M/s Sultan Khan

H R ENGINEERS