Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.7 CrAccepted-AOC | ₹15.7 Cr | L1 | Accepted-AOC Accepted being L1 bidder. |
| 2 | L2₹16.2 CrRejected-Finance | ₹16.2 Cr | L2 | Rejected-Finance Rejected being higher than L1 bidder. |
| 3 | L3₹17.2 CrRejected-Finance | ₹17.2 Cr | L3 | Rejected-Finance Rejected being higher than L1 bidder. |
| 4 | L4₹18 CrRejected-Finance F 18 ANSAL COMPLEX OPP JWALA HARI MARKET PASCHIM VIHAR NEW DELHI 110063 | NEW DELHI | WEST DELHI | DELHI | 110063 | ₹18 Cr | L4 | Rejected-Finance Rejected being higher than L1 bidder. |
| 5 | L5₹18.4 CrRejected-Finance BHAGWATI BHAWAN PO HASIMARA DIST JALPAIGURI PIN 735215 | ALIPURDUAR | WEST BENGAL | 735215 | ₹18.4 Cr | L5 | Rejected-Finance Rejected being higher than L1 bidder. |
Tender Value
₹17 Cr
EMD Value
₹11.8 L
Closing Date
3 Feb 2021, 6:00 pmClosed
CE (AF) SHILLONG ZONE
HQ CE (AF) SHILLONG ZONE, ELEPHANT FALLS CAMP, PO-NONGLYER, SHILLONG-793009
PROVN OF FORWARD SUPPLY POINT (FSP) QTY-04 AT AF STATION BORJHAR
2019_MES_271228_2
88417/BOR/E8
Open Tender
Civil Works
750 days
BORJHAR
Please refer Tender documents.
7 documents required · 7 mandatory
₹3,000
GE (AF) BORJHAR
₹11.8 L
22 Feb 2021
9 Jan 2021
5 Feb 2021
9 Jan 2021
3 Feb 2021
20 Jan 2021
10 Jan 2021 - 14 Jan 2021
Amount
SCHEDULE "A" Part - I (BUILDING WORKS) Details of prepriced Schedule is given in tender documents
SCHEDULE "A" PART- II ( SITE CLEARENCE, SITE DEVELOPMENT AND EARTH WORK) Details of prepriced Schedule is given in tender documents
SCHEDULE "A" PART- III ( INTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in tender documents.
SCHEDULE "A" PART-IV ( INTERNAL WATER SUPPLY ) Details of prepriced Schedule is given in tender documents.
SCHEDULE "A" PART- V ( AREA DRAINAGE ) Details of prepriced Schedule is given in tender documents.
SCHEDULE "A" PART- VI (EXTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in tender documents
SCHEDULE "A" PART- VII (EXTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents
SCHEDULE "A" PART- VIII (LIGHTENING PROTECTION) Details of prepriced Schedule is given in tender documents
SCHEDULE "A" PART- IX (ROAD/PATH/CULVERT) Details of prepriced Schedule is given in tender documents
SCHEDULE "A" PART- X (TOE WALL) Details of prepriced Schedule is given in tender documents
SCHEDULE "A" PART- XI (SEWAGE DISPOSAL) Details of prepriced Schedule is given in tender documents
SCHEDULE "A" PART- XII (FENCING/GATE) Details of prepriced Schedule is given in tender documents
SCHEDULE "A" PART- XIII (STATIC WATER TANK) Details of prepriced Schedule is given in tender documents
SCHEDULE "A" PART- XIV (FIRE BREAKS) Details of prepriced Schedule is given in tender documents
SCHEDULE "A" PART -XV (MISCELLANIOUS ITEMS) Note:- This schedule is not pre-priced by MES.
SITE CLEARENCE, SITE DEVELOPMENT AND EARTH WORK M&L for bringing approved earth from outside MD land and filling at site at a depth n. Exc. 2.50m from existing road level including spreading in layers n. Exc. 30 cm thick, watering, ramming/ rolling and finished to required gradient/level, size and shape etc, complete all as specified and as directed. . Note:- (i) Payment shall be made for solid quantity arrived consolidation. .(ii)Before execution of this earth shall be tested/ checked for suitability to use.
AIR-CONDITIONER 1. Design of suitable capacity AC plants based on VRF (Variable Refrigerant Flow) technology, alongwith AHUs, ducts etc. The heat load calculations for summer, monsoon and winter including psychometric analysis, schematic layout diagram of AC plants and ducting system, refrigerant piping, condenser piping, hot water piping, AUH layout drawings and all other necessary documents. The design of AC plant must be got approved from any IIT / NIT as per User data sheet (enclosed) and thereafter put up to this HQ for approval 2. Installation, testing & commissioning of such designed capacity AC plants including all required accessories with a provision of heating and dehumidification and required filters and consideration of 50% stand by capacity. 3. Preparation of AUTO cad drawings of buildings to be considered. Note:- The distance between outerperiphery of AC plant room building to outerperiphery of FSP building is 100 m. Any variation in distance/ connecting pipe length during execution will be measured and paid as deviation.
INTERNAL ELECTRIFICATION. Supply and fixing flame proof industrial type CMRI certified LED light fitting 1x16/20 Watt with LED tube including integral reflector made of aluminium alloy LM6 , with electronic ballast , bipin holders, connector block etc and all accessories prewired and making connection with three core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed. CAT NO EXTN1L T8 MAKE CROMPTON or equivalent model as approved.
Supply and fixing street light bracket made out of 32mm dia GI pipe light grade of length not less than 1.20m, bend to required shape, fixed on wall with suitable size mild steel flat iron clamps, nuts, bolts, washers etc including aluminium painting over a coat of red oxide primer for holding the security light fitting complete all as specified and directed
Supply and fixing Flame proof sheet metal enclosure for MCB TPN double door DB 4 way , 440V with 200 Amps rated bus bar , neutral link, din rail suitable for mounting MCBs complete all as specified and directed ( MCBs shall be measured and paid seperately under relevent item).
Supply and fixing MCB TPN 63 Amps ( C - curve) breaking capacity 10KA , 440V with cable connection and copper lugs complete all as specified and directed .
Supply and fixing MCB TPN 32 Amps ( C - curve) breaking capacity 10KA , 440V with cable connection and copper lugs complete all as specified and directed .
Supply and fixing MCB TPN 20Amps ( C - curve) breaking capacity 10KA , 250V with cable connection and copper lugs complete all as specified and directed .
Supply and fixing MCB SP 6-32Amps ( C - curve) breaking capacity 10KA , 250V with cable connection and copper lugs complete all as specified and directed .
M & L for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised earth wire of size 4 mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 15 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) including testing complete all as specified and as directed.
S&F Star rated ceiling fan of sweep 1200mm complete with all accessories all as specified and as directed.
S & F exhaust fan of sweep 250 mm dia with metal body incl louvers complete all as directed
Supply and fix LED mirror light fittings 7 Watt integral polycarbonate LED channel with white acrylic cover Cat no :- LCL-07-CDL Crompton or equivelent Bajaj/ Phillips.
Supply and fix LED tube light fitting. 1x18/20 Watt, Box type surface mounted 230 V, 4 ft etc. complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size and including one LED tube, 18/20 W complete all as directed. make - Crompton code no- LT5RT-18-CDL or equivelent bajaj/ surya/Havells
Supply fixing, connection and testing MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 6-32 Amps Make : Legrand / L&T/Schiender.
EXTERNAL WATER SUPPLY .Labour only for horizontal boring below pavement of taxi track/ runway/ road as in soft/loose soil for crossing 100mm to 150mm size GI pipe lines complete all as specified and directed .
Material and Labour for cast iron sluice valve 80mm dia with flanged ends heavy duty of class PN1.6 ISI marked, drilled for bolts comprising of gun metal spindle or brass spindle and operating handle including necessary ruber gasket joint with nuts and bolts complete all as specified and directed .
Construction of brick masonry valve pit chamber of iner dimension 900x900x900mmsuitable for sluice valve upto 100m size, with PCC 1:4:8 type D-2 for foundation, brick work in cement mortar 1:6 , 15m thick rendering in CM1:4 PCC 1:3:6 type C-1 as in coping including necessary earth work with MS sheet cover of 3.15m thick on 40x40x6mm thick angle iron frame work including two coats of synthetic enamel paint over a coat of red oxude primer with provision of locking arrangement complete all as specified and directed .
EXTERNAL ELECTRIFICATION .Boring holes under road , hardstanding by trenchless technologyusing ultra sound technic and necessary machine including HDPE pipe of 150mm dia suitable for 0.4 mpa working pressure complete all as specified and directed .
Supply installation testing & commissioning of vermin and dust proof totally enclosed phasphatsed powder painted cubical outdoor type, double door floor mounting compartmentalized panel board of size 1.8 (L) X 1.9(H) X.45(W) made of 14 SWG (3.15mm ) thick C R sheet and 50 mm X 50 mmX 5 mm size angle having 4 nos legs at the bottom and CR sheet roofing on the top. The panel board is to erected in 1 : 3 : 6 PCC foundation including excavation of trench and vrick soling etc complete with 500 Amps 4 (Four) number Aluminium bus bar with provision for one no 315 Amps 4 pole MCCB as incomer and provision for 12 Nos TPN MCCB out going as specified andn directed by the Engr-in-Charge confrming to IP 65 protection compromising of the following electrical items:- (a) INCOMER (i) MCCB TPN 415 Volts 315 Apms 35 KA -01 Nos (b) OUT GOING (i) MCCB TPN 415 Volts 63 Apms 25 KA -04 Nos (ii) MCCB TPN 415 Volts 32 Apms -04 Nos (iii) MCCB TPN 415 Volts 16 Apms -04 Nos (iv) Digital voltmeter - 01 Nos (v) Digital Ammeter with CT's - 01Nos (vi) Digital timer with contractor - 01 Set (vii) LED indication lamp R-Y-B (viii) SP MCB 0.5 Amps - 03 Nos
Supply and installed testing and commissioning outdoor type APFC Bank panel MDXL/LTXL with thyrister control module with aluminium heat sink with semi-condouctor fuses, smooth switching On and Off automatically at + 10 Volts, compartmental design dust and vermin proof suitable for 3 phase, 4 wire 440 volt, made out of 3.15mm thick CRCA sheet with built upon rigid frame work, cubical type type, dutly powder coated RAL 7035, capacity 100 KVAR (50X1+20X1+12.5X2+2.5X2) KVAR capacitor bank having following accessories including control wiring with HR FR / FRLS copper wire complete all as specified and directed as follows:- (i) Compact modular bolted design, removable side and back panel with botom cable entry. (ii) Capacitor installed in removable assemblies for ease of operation and maintenance.
Srl Item No. 36 (Contd...) (iii) Incoming of APFC panel of MCCB TPN 200 Amps, 16 KA breaking capacity with high electrolytic grade Aluminium bus bar of suitable rating. Cont. item No. 20.02 :- .(iv) MDXL/LTXL capacitors of 100 KVAR (50X1+20X1+12.5X2+2.5X2) with capacitor duty thyristor control module & branch protection MCCBs of suitable rating with demi-conductor fuses to each capacitors. (each capacitor bank equipped with discharge resister) & 7% detuned harmonics filter reactor. (v) High performance microprocessor based 3 phase APFC relay 06 stage with Auto / manual Option. (vi) 3 Phase power analyzer with in-but, Amp meter, volt meter and PF menter. (vii) Induced air system provided with axial flow fan/ centrifugal fan.
Supply and fixing LED street light fitting 25 watt. MAKE BAJAJ CAT NO 169708 or equivalent make of CROMPTON/WIPRO.
Supply and fixing IP 66 thermoplastic polycarbonate pole box with terminal totally shock proof , water proof halogen free silica and having internally embedded gasket technology. MAKE; HENSEL
Supply and fixing street light bracket made out of 32mm dia GI pipe light grade of length not less than 1.25m, bend to required shape, with suitable size mild steel flat iron clamps, nuts, bolts, washers etc including two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed
Supply, laying and testing PVC insulated , PVC sheathed, stranded copper conductor 1.5sqmm two core 1100 volts electric control cable ( Heavy duty) complete all as specified and directed
LIGHTENING PROTECTION Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised strip of size 32 mm x 6 mm by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on complete all as specified and as directed.
S&F for H beam pole 150mmX150mm, 16Mtr hight (weight 37Kg per RM complete all as specified and as directed.
EOT CRANE Design, supply and installation of flame proof electrically operated overhead travelling EOT crane bridge and trolly, double girder having span of 5 metre, long travel 15 metre and weight lifting capacity of 2.00 Ton, height of lift 2.5 metre ( For FSP) considering following conditions: (i) Internal dimension of bldg is 15m x 6m x 4.7m (ii) Height avilable for working / stacking of equipments shall be 2.5m and rest 2.2m is to cater for Crane installation. (iii) The operation and micro speed of Crane shall be as follows : (a) main Hoist : 03-04m/min (b) Micro in main Hoist :0.3-0.4m/min (c) Cross travel : 10-12m/min. (d) Micro in cross travel : 1-1.2m/min (e) Long travel :15-18 m/min (f) Micro in long travel : 1.5-1.8m/min (iv) EOT Crane fitted shall be fire/flame proof and comply with the safety specifications given in the STEC Pamphlet No 7. (v) Design of Crane and proof checking of design shall be from any of the IITs/NITs within 2 months from the date of acceptance of the tender.
ROAD/PATH/CULVERT M&L for 150mm thick ( Compacted thickness) Wet Mix Mecadam (WMM) in two layers of 75mm thick each layer compacted seperately as per table 400-II MORTH , IRC specification with crushed stone aggregate of specified grading , rolled and consolidated using 8-10 tonne capacity power roller to required gradient and camber complete all as specified and directed.
Bringing approved earth from outside Min Of Def ( MD) land and forming embankments, including spreading , levelling , watering and well ramming in layers not exceeding 30cm thick and to required size, shape etc. not exceeding 1.5m high from base complete all as specified and directed.
Bringing approved earth from outside Min Of Def ( MD) land and forming embankments, including spreading , levelling , watering and well ramming in layers not exceeding 30cm thick and to required size, shape etc. exceeding 1.5m but not exceeding 3.00m high from base complete all as specified and directed.
M&L for preparing unsurfaced wet mix macadam surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete all as specified and directed
SEWAGE DISPOSAL M&L for septic tank of 10 users on site LLDPE conventional type septic tank design to carry sewage and sullage water, excavation in any type soil, PCC 1:4:8 below foundation, vent shaft, connectionetc complete all as specified and directed.
M&L soak well of size 1.2m dia 3m deep, effective depth excavation in any type soil, foundation in PCC 1:3:6, wall of honeycomb masonry with topping of M-25 concrete, including intercepting chamber, screen chamber made up of brick work in CM, RCC cover slab in M-25/ SFRC cover inter connecting pipes of RCC/DWC complete filled with brick bats of suitable size complete all as specified and directed.
STATIC WATER TANK Supply and fix PVC water bar 150mm wide for construction joint .
SARINS
Allied Construction
City Promoter and Buildwell Pvt. Ltd.
MAA BHAGWATI ASSOCIATES
M.P. Khaitan
PK Constructions
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid