Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.0 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹29.5 L+₹1.2 L (4.29%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹35.3 L+₹7.0 L (24.9%)Rejected-Finance | L3 | Rejected-Finance Othet than L1 |
Tender Value
₹29.1 L
EMD Value
₹58,110
Closing Date
21 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Maj Mathews M Shepherd
Mathura Cantt
ADDN ALTN TO BUILDING NO P 01 P 02 AND P 04 UNDER GE (W) MATHURA
2023_MES_618580_2
8300/1197/E8
Open Tender
Civil Works
Item Rate
120 days
GE (WEST) MATHURA
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE (West) Mathura
₹58,110
Yes
8 Jan 2024
30 Oct 2023
28 Nov 2023
30 Oct 2023
21 Nov 2023
6 Nov 2023
Amount
Taking down chowkhats with shutter (without taking off shutters from the frame) area exc. 1.50 Sqm but n.exc 4.00 sqm each complete all as specified and directed.
Taking down chowkhats with shutter (without taking off shutters from the frame) area not exc. 1.50 Sqm each complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm and not exc. 2 Sqm each complete all as specified and as directed by Engineer-in-charge.
S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified & shown in relevant drawing of item No. 08095 in MES Schedule (Part-II) and directed by Engineer-in-Charge.
S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with particle board core and 2,4 or 6 raised panel design with 5mm thick Moulded PVC Sheet on the front Face & 5mm Plain colour PVC sheet on back face, fixing in frame at site complete specification & drawing as per SSR complete all as specified and directed.
S&F stainless steel handles fabricated type of size 125mm long, complete all as specified and directed.
S&F tower bolt stainless steel of 150 mm long complete all as specified and directed.
S&F stainless steel butt hinges 100mm complete all as specified and directed.
S&F 125x60mm pressed steel frames for doors with one or more rebates including necessary lugs, hinges lock, strike plate etc complete all as specified and as directed.
S&F Pressed steel frame for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.
M&L for cement concrete type C-1, (1:3:6) using 20mm graded aggregate as in bed block or filling of chowkhats including necessary form work complete all as specified and directed.
S&F 35 mm thick factory made plain framed, panelled shutter (any number of panels) with lock rail and panel of 9mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces. The size of rail and styles as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated using second class Hard Wood (Hollock or Bonsum) complete all as specified and directed by Engineer-in-charge.
S&F 35mm thick factory made glazed and skeleton shutters made of second class hard wood (Bonsum/Hollock), open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Part I Section 8 Clause 8.24 (a) kiln seasoned and chemically pressure treated fixed to chowkat complete all as specified and directed by Engineer-in-charge.
M&L for 30mm thick flush shutter solid core construction with block board core & ply wood face panels, commercial type on both faces, covered decorative on both face veneer with liping/frame to match complete all as specified and directed by Engineer-in-charge.
S&F 200mm stainless steel barrel tower bolts with bright bolt and fixed complete all as specified and directed.
S&F 300mm stainless steel sliding door bolts, bolt type with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.
S&F 150mm long stainless steel handles, oval type complete all as specified and directed.
S&F 300mm mild steel (Helical door spring) ordinary rat tail rod pattrern spring including roller and roller plate complete with necessary welding work complete all as specified and directed.
S&F powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S & F powder coated Anodised aluminium Sliding door section, aluminium sections weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws Anodise aluminium fitting such as including hinges 100 mm long (2 no) and suitable handle(2 No) & including roller for sliding complete.
S & F powder coated Anodised aluminium door section, aluminium sections weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws Anodise aluminium fitting such as including hinges 100 mm long (2 no) and suitable handle(2 No) complete all as specified and directed.
S & F powder coated aluminium sliding window three track with frame & two glass shutters using 4 mm thick glass tinted modi guard and one shutter with stainless steel wire gauge wire cloth 0.31 mm nominal dia of wire and width of aperture 1.61 mm using aluminium powder coated section aluminium cleat ,PVC track ,bearing, handle lock,rubber beading etc complete fittings as approved. Note:- Size of aluminium section shall be under- (i) Three track top and vertical - Jindal main-2010 section No 20621 or equivalent as approved by GE. (ii) Three track bottom - Jindal main - 2010 section No 20620 or equivalent as approved by GE. (iii) Shutter vertical section -Jindal main -2010 section 20604 or equivalent as approved by GE . (iv)Shutter top and bottom - Jindal main -2010 Section 20604 or equivalent as approved by GE. (v)Shutter vertical middle (interlock) - Jindal Main -2010 Section 20605 or equivalent as approved by GE.
S & F powder coated Anodised aluminium window and ventilator shutters side hung type without sash, aluminium sections weighing 0.55 kg/ m including necessary joining cleats, glazing clips rubber packing, anodised aluminium snap beading screws Anodise aluminium fitting such as peg stays 150 mm long (1 No), including pag stay and hinges type B-21 100 mm long (2 No) and suitable handle (1 No) complete all as specified and directed.
S&F powder coated aluminium grill in windows,doors or ventilators of approved make complete all as specified and directed.
S&F Factory made box type steel windows with hung shutters both glazed and guaged shutter frame 60x25 mm ERW hollow 'P' section with wall thickness not less than 1mm fixed to pressed steel frame 120mm x 70 mm x 1.6mm thick including fixing glazed portion, iron grills 8mm square MS bar hunges with steel handle and fitting, lugs etc, including one shop coat of primer complete all as specified and directed.
S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50 sq.m. in each pane complete all as specified and directed.
S & F 5 mm thick frosted glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane.
S&F Sheet glass 5 mm thick in glazing to aluminium door, window & partition including pad, gasket complete all as specified and directed.
S&F 12 mm thick toughened glass as in door including fitting the rubber packing aluminium snap beading complete all as specified and directed.
S&F 12mm thick toughened glass door with film of size exceeding 1.5 Sqm but not exceeding 3.00 Sqm including steel connectors, top and bottom pivots, stoppers, other fixtures required and all type of locking arrangement & brass handles fancy type 300mm long hole to hole on both side complete all as specified and directed.
M&L for preparation of new wooden or wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge.
M&L for preparation of steel surface already treated with primer over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
M&L in aluminium Motrice lock 4 levers and100 mm size for aluminium doors complete all as specified and directed.
S&F 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
S&F door closer hydraulically regulated designation No. 3 universal type cast iron body suitable for door shutters of 851 to 1000mm in width of weight between 61 to 80 kg and fixed complete all as specified and directed.
S&F for double action floor spring hydraulically regululated made up of minimum 1.25mm thick aluminum sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Eng-in-charge.
S&F in repairs curtain rod, stainless steel of 25mm dia with fixing brackets stop rollers, knobs etc fix complete all as specified and directed.
S&F GI lay in metal ceiling system of 600 x 600mm module which includes provides and fixing 'C' wall angle of size 20 x 30 x 20 mm of 0.5 mm thick prepainted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm c/c , suspending the main main C carrier os size 10 x 38 x 10 mm made of GI steel 0.7mm thick from the soffit with help of soffit cleat 37 x 27 x 25 x 1.6mm, rawl plugs of size 38 x 12 mm and C carrier suspension clip and main carrier bracket at 1000mm c/c. Inverted triangle shaped spring Tee having height of 24mm and width of 34 mm made of GI steel 0.45mm thick is then fixed to main C carrier and in direction to perpendicular to it at 600mm c/c with help of suspension brackets. Where ever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120gm/sqm(both side inclusive, fixing with clip in tiles into spring T with:-
GI metal ceiling lay in plain beveled edge global white colour tiles of size 600 x 600mm and 0.5mm thick with 25mm height, made of GI sheet having galvanizing of 100gm/sqm (Both side inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.
GI metal ceiling lay in plain beveled edge global white colour tiles of size 600 x 600mm and 0.5mm thick with 25mm height, made of GI sheet having galvanizing of 100gm/sqm (Both side inclusive) and 20% perforation area with 1.8mm dia holes and having NRC of 0.5 electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and directed.
M&L for Non skid Ceramic coloured tiles 7-8 mm thick (square/ rectangular) polished, area of each tiles exc0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L Coloured Glazed ceramic tiles in vertical surface 450x300x7 mm with highlighter thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10mm thick plaster in cement mortar (1:3) complete all as specified and directed.
M&L for vitrified ceramic tiles light shade 10mm thick (square/ rectangular) polished area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick cement screed bed in CM (1:4) complete all as specified and directed.
M&L for vitrified ceramic tiles light shade 10mm thick (square/ rectangular) polished area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick cement screed bed in CM (1:4) complete all as specified and directed.
All as per item No 43.00 (here-in-before) above but as in skirting over 10mm thick backing coat in CM (1:3) complete all as specified and directed.
All as per item No 43.10 (here-in-before) above but as in skirting over 10mm thick backing coat in CM (1:3) complete all as specified and directed.
Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc Laid, bedded and pointed in any mortar.
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) for shelves (veneering to wall) including 15mm thick plaster in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and directed.
M&L for Reinforced cement concrete (nominal mix) (1:2:4) type B1 using 20mm graded stone aggregate as in chajjas etc complete all as specified and directed.
M&L for Reinforced cement concrete (nominal mix) (1:2:4) type B1 using 20mm graded stone aggregate as in beams, cantilevers, bressumers, lintels over 1.5 m span complete all as specified.
M&L for Reinforced cement concrete (nominal mix) (1:2:4) type B1 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors roofs landings canopies deck slab and in snelves and the like complete all as specified and directed.
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for TMT MS bars of 5mm dia and upto 10mm dia as in stirrups and spacers cut to lengh bent to shape reqd incl cranking bending spirally for hooking for column and binding with MS annealed wire not less than 0.9mm dia complete all as specified and directed.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished of flat surface complete all as specified and directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams etc. for rough finished surface of concrete complete all as specified and directed.
Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.
Form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls , horizontal or sloping and similar work exceeding 5cm wide but not exceeding 100cm wide, surface flat for rough finished surface of concrete complete all as specified and directed by Engineer-in-Charge.
M&L for cement concrete (1:2:4) type B2 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railigs upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, sligtly rounded or chamfered angles and throating, as directed including necessary form work complete all as specified and directed.
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces finished fair and even in CM (1:4) mixed with liquid water proofing compound using 200ml per bag of 50 Kg cement complete all as specified and directed. Note:- Liquid WPC shall be measured and paid saperately.
M&L for rendering 15 mm thick in CM 1:4 including water proofing compound on fair face of brick or concrete surface,finished even and smooth without using extra cement complete all as specified and directed.
Supply only Liquid water proofing compound of approved complete all as specified and directed.
M&L for water proofing treatment with APP modified bituminous membrane 3mm thick consisting of the following for RCC roof :- (a) Cleaning palstered roof surfaces and applying a coat of oxidised bitumen based solvented primer a@ 0.3Kg /Sqm of approved make on top of dry surface of RCC roof complete all as specified and directed. (b) M&L for APP modified polymeric water proofing membrance 3mm thick weight not less than 3.0 Kg/Sqm with non woven polyster core of approved make applied by heating one surface of membrane with LPG torch with lap of 100mm and the overlap shall be sealed by flame complete all as specified and directed.
M&L for cement concrete tiles 25cm x 25cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment, & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and directed by Engr-in-Charge.
Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-charge.
M&L for Brick work with sub class ‘B’ old size burnt bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed by Engineer-in-charge.
M&L for brick work with sub class ‘B’ old size burnt bricks straight or curved on plan to any radius half brick thick wall built in CM (1: 6) complete all as specified and directed.
Taking down cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, any description etc. complete all as specified and as directed.
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 5mm thick in CM (1:4) as on ceiling complete all as specified and directed.
M&L for washed stone grit plaster on exterior walls in two layers the base plaster shall be 15mm thick in two layers. First layer 10mm thick in CM (1:6) & top layer 5mm thick in CM (1:4) mixed with approved water proofing compound @ 3% & shall be sufficiently rough and combed be wire brush or nail comb, feed from all dust, dirt, grease, oil etc for proper bonding. The base plaster shall be cured for 3 to 4 days before applying the grit wash plaster. A homogeneous mix of white cement, coarse sand and 10mm nominal size sone chippings of approved colour in proportion 1:1/2:2 be prepared by adding water proofing compound @ 2% by weight of cement and be mixed homogenously and then mix be applied on a prepared base surface with a float applying gentle pressure in panels with groove all around as per approved pattern including beading, White cement slurry shall be applied @ 2Kg/sqm on base coat before applying a stone grit wash plaster. After the initial setting of about 1 to 2 hours the surface of stone grit plaster surface be scrubbed and washed out gently with a nylon brush and water. The cement on the surface of stone chips be washed away exposing the aggregates and plastered surface shall be cured for 14 days including necessary steel scaffolding work, complete all as specified and directed.
M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer prepartory to distemper including a coat of 1mm thick wall putty complete all as specified and directed.
M&L preparation of new plastered surfaces and applying two coats of exterior weather coat and primer on walls all as specified.
M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
M&L for complete removal of existing treatment and preparation of old surface of walls and applying two coat of distemper oil emulsion distemper on wall incl applying a coat of wall care putty to achieve smooth finish to wall etc complete all as specified and directed.
M&L for complete removal and preparation of old painted surfaces of wall and applying two coat of exterior emulsion paint over a coat of primer complete all as specified and directed.
M&L for preparation of old treated surfaces of ceiling and applying one coat of white wash complete all as specified and directed.
M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
M&L for preparation of old steel surfaces of any description or girth over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
Taking up or down steel tubing and connections of 15 mm bore pipe complete all as specified and as directed.
Taking up or down steel tubing and connections of 20 mm bore pipe complete all as specified and as directed.
M&L for 15 mm nominal bore Mild steel galvanised water tubing, medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
M&L for 20 mm nominal bore Mild steel galvanised water tubing, medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
M&L for Cutting cheses, pinning in, making good to facing where required & pointing in CM 1:3 for conc water tubing and like not exc 10CM girth in brick wall etc complete all as specified and directed.
S&F rotational moulded polyethylene water storage tank triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I including dismantling water tank of 750 Ltr capacity and ball valve complete all as specified and directed.
M&L Ball valves PTMT 20mm (Min. wt 20 mm -210 gms), with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe complete all as specified and directed.
S & F in 20mm bore gunmetal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F in repairs vitreous china urinal Half stall type, white incl CP spreader screwed for iron pipe and fixed complete including providing and fixing plugs with and including 60mm long brass screws, pointed around urinal back in cement, fixing discharge pipe, flush pipe, grating and union for discharge complete all as specified and directed.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with PVC sheet cover & 'P' OR 'S' trap complete all as specified and directed.
S & F in repairs PVC Straight jet spray with 1.0 m tube for water closet wash down(pedestal pattern) complete all as specified and directed.
S&F health faucet 2 in 1 with 1.5 mtr tube and hook of same complete all as specified and directed.
S & F in repairs PVC 10 ltrs syphonic action type flushing cistern, low level with inlet, ball valve, float and handle including brackets, flush pipe of PVC 32mm bore and connection to WC pan complete all as specified and directed.
S & F in repairs Wall hung vitrous china wash hand basin with full pedestal size 550 x 400 mm screwed shank fly nut flange end including brackets and cutting for and pinning of hole including 32 mm dia chromium plated waste coupling and bottle trap complete all as specified and directed.
S & F in repair Counter wash hand basin white flat black of size 550 x 440mm waste pipe and waste fitting 40mm brass chromium plated and waste pipe and 15mm dia PVC connection with brass nuts complete all as specified and as directed.
S&F PVC bathroom cabinet mirror 450 x 350 mm complete all as specified and as directed.
S&F in repair bib taps cast copper alloy with screwed down for iron pipe or brass ferrule and fixed fancy type chromium plated 15 mm bore complete all as specified and as directed.
S&F in repair pillar taps 15mm bore cast copper alloy fancy type with capstan heads chromium plated scre-wed down high pressure with or without lettered hot' or'cold' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.
S&F in repairs 15mm bore angle cock one way fancy type, chromium plated, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed complete all as specified and as directed.
S&F in repairs 15mm bore stop valve, cast copper alloy fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed complete all as specified and as directed.
S&F Stainless steel Hat pegs set of 6 solid body anodised complete all as specified and as directed.
S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.
S&F in repair brass chromium plated central hole basin mixer with regular spout, popup waste system and 450mm long braided hoses with connection and nuts complete all as specified and as directed.
S&F Towel Bracket chromium plated brass 61cm size complete all as specified and as directed.
S&F Towel rail round with round flange complete all as specified and as directed.
S&F Toilet paper holder fix with chromium plated brass screw and wooden/ plastic cleats complete all as specified and as directed.
S & F soap dish fixed as chromium plated complete all as specified and as directed.
S&F stainless steel grating 100mm bore size fixed with white cement complete all as specified and as directed.
S&F 32mm Waste fittings, brass, chromium plated for basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.
S & F 32mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 and fittings, fixed to WHB, sink complete complete all as specified and as directed.
Dismantling of cast iron pipes with fittings jointed in cement mortar and taking out from trenches walls etc upto 100 mm bore complete all as specified and as directed.
S&F 110mm PVC (SWR) pipes of pressure rating 6kg/per sqcm socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors/wall complete all as specified and as directed.
S&F 75mm PVC (SWR) pipes of pressure rating 6kg/per sqcm socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors/wall complete all as specified and as directed.
S&F 110mm PVC (SWR) bends any radius with oval access door complete all as specified and as directed.
S&F 75mm PVC (SWR) bends any radius with oval access door complete all as specified and as directed.
S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed.
S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed.
S&F 110mm PVC (SWR) vent cowl complete all as specified and as directed.
S&F 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.
M&L for bands, straps, supports or stays for rainwater , Ventilating pipes, including bolts , if required; hooks ( stay), heavy, for large gates; hook and lintle hanges; large hasps and staples ; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters ; knee piece inserts; two way and three ways straps , plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thick above or below ground level complete all as specified and directed.
M&L for 75mm thick cement concrete type C-2, (1:3:6) using 20mm graded stone aggregate as plinth protection and finished surface even and smooth without using extra cement complete all as specified and directed.
M&L for point wiring complete with 2.5sqmm single core FRLSH ISI marked PVC insulated cable with multi stranded copper conductor in and including PVC conduit 20mm dia and thickness not less than 1.5mm, ISI marked with all accessories for concealed conduit as directed at site including chase cutting for one light/fan point controlled by one switch including MS sheet sunken box concealed in wall duly painted inside with one coat of red oxide primer and two coats of black bituminous paint in out side with 3mm thick hylum brand bakelite sheet cover for fixing switches, sockets, regulators etc. alongwith 2.5 sqmm multi stranded FRLSH, PVC insulated copper cable as continuous earth connected to comman earth and earth dolly including making good the disturbed surfaces complete all as specified and directed.
All as per item No 121.00 (here-in-before) but for one 5 pin socket outlet 5amps point controlled by one switch on independent board.
All as per item No 121.00 (here-in-before) but for one 5 pin socket outlet 5amps point controlled by one switch on the same board with other switches.
M&L for Point wiring complete with 4 sqmm single core FRLSH PVC insulated cable with multi stranded copper condutor in and including PVC conduit 20mm dia and thickness not less than 1.5mm, ISI marked with all accessories for surface or concealed conduit as directed at site incl chase cutting for one light/fan point controlled by one one way switch including MS sheet sunken box concealed on wall duly painted inside and outside with one coat of red oxide primer and two coats of black bituminous paint with 3mm thick hylum brand bakelite sheet cover for fixing switches, sockets, regulators etc. alongwith 4 sqmm multi stranded FRLSH, PVC insulaedcopper cable as continuous earth connected to common earth and earth dolly including making good the disturbed surfaces complete all as specified and as directed.
M&L for Sub main wiring with 2 runs of 6 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS 1100 volts grade cable drawn through and in existing surface / recessed PVC conduit and connecting incoming/outgoing electric connections and one run of 6 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS 1100 volts grade cable as earth conductor including taking down old unsv submain wiring and making good the disturbed surfaces complete all as specified and directed. Note: Two runs of 6 Sqmm cable, one run of 6 Sqmm earth conductor and one run of PVC conduit of 32mm dia shall be measured and paid as one unit length.
M&L for Sub main wiring with 2 runs of 10 sqmm single core HRFR PVC insulated but unsheathed multistranded copper conductor HRFR 1100 volts grade cable drawn through and in existing surface / recessed PVC conduit and connecting incoming/outgoing electric connections and one run of 6 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS 1100 volts grade cable as earth conductor including taking down old unsv submain wiring and making good the disturbed surfaces complete all as specified and directed. Note: Two runs of 10 Sqmm cable, one run of 10 Sqmm earth conductor and one run of PVC conduit of 32mm dia shall be measured and paid as one unit length.
S&F switch piano flush button single pole, one way 6 Amp 240 Volt complete all as specified and directed.
S&F switch piano flush button single pole, one way 16 Amp 240 Volt complete all as specified and directed.
S&F socket 6 amps 5 pin flush type, 230 volts complete all as specified and directed.
S&F socket out let, 6 pin 6 and 16 amps multi purpose 2 in 1 flush type 230 volt complete all as specified and directed.
S&F sheet metal enclosure Single pole & neutral with 2 pin and earth plug and socket 20A 240 Volt complete with one single pole MCB of cap 20/25 A, C series complete all as specified and directed.
S&F ceiling rose 63x30 mm three terminal, polycorbonate body complete all as specified and directed.
SS&F fan regulator electronic, five step type hum free suitable control speed of fan from 0 to 100% and connecting electrically all as required complete all as specified and directed.
S&F Angle/ batten holder polycorbonate type body suitable for batten fitting complete all as specified and directed.
Supply & fixing tube light fitting with surface and wall mounted decorative ultra slim round profile LED lighting fixture, 20 watt LED with entruded polycarbonate, environment friendly, energy efficient ready to use with polycarbonate diffuser & integrated electronic driver complete all as specified and directed.
Supply & fixing bulk head decorative LED light fitting of 10 W, IP - 66, environmental friendly, ultra modern, energy saving, surface mounted complete all as specified and as directed.
Supply & fixing tube light fitting with surface and wall mounted decorative ultra slim round profile LED lighting fixture, 10 watt LED with entruded polycarbonate, environment friendly, energy efficient ready to use with polycarbonate diffuser & integrated electronic driver complete all as specified and directed.
Supply & fixing security light with LED street light, 30 Watt, IP - 66, Impact resistance - IK07, colour temp- 5700 K, Class-I in pressure die-cast aluminium alloy for housing (heat sink) for effective thermal management, sturdiness, excellent corrosion resistant, separate optical and control gear compartment & top opening for easy maintenance. Polyster powder coated grey after phosphochromate treatment High efficiency long life LED modules with SMD LED package mounted on MCPCB. Lumen efficacy of LED >110 lm/W with PC lens to ensure better uniformity of light distribution. Powered by Built-in, Potted electronic LED driver (SMPS based constant current supply) with lower THD, Output Open Circuit protection, Phase to Phase protection, Over Voltage protection, Surge Voltage protection upto 10 kV with external SPD & other safety tests as per IS 15885 Part-2/ Sec13 alongwith arm with single arm bracket OD 58 mm (max) with clamp, nut, bolts etc mounted on wall complete in all respect complete all as specified and directed.
Supply & fixing ceiling light with 40W Watt, 6500 K, slim LED panel 2' x 2' LED panel for recessed on ceiling) dust-free installation with high brightness LEDs for glare-free homogenous illumination with driver and all other connected accessories complete all as specified and directed.
Supply & fixing sheet metal enclosure MCB distribution board triple pole & neutral 415 volts 4 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.
Supply & fixing sheet metal enclosure MCB distribution board single pole & neutral 240 volts 12 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.
Supply & fixing of MCB, 415 Volt, 10 KA, 4 Pole, 100 Amps, C series complete all as specified and directed.
Supply & fixing of MCB DP, 240 Volt, 10 KA, 63 Amps, C series complete all as specified and directed.
Supply & fixing of MCB SPN, 240 Volt, 10 KA, 40 Amps, C series complete all as specified and directed.
Supply & fixing of MCB single pole 240 volt any rating from 6 to 32 amps, C series with rupturing capacity 10 KA complete all as specified and directed.
Supply and fixing BLDC ceiling fans, 5 star rated by Bureau of energy with service value of not less than 8.40, (26W±10%) with or without remote, with rated speed 350 Rev per min, air delivery 220 Cum/min complete with blades, down rods, electronic regulator and accessories, 230 volt, 1200 mm sweep, suitable for single phase supply complete all as specified and directed.
M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground not less than 2.25 mtrs deep below normal ground level with top edge of the plate not less than 1.5 mtrs below normal ground level, surrounded from all sides with mixture of charcoal and common salt, connected to galvanized earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel protected by galvanised iron light grade 15 mm dia pipe and GI pipe 20mm light grade for water filling including 15x20mm reducer socket funnel wire mesh, RCC cover with concrete 1:2:4 using 8 mm# bar@100 mm c/c both ways ,PCC chamber pit with PCC (1:3:6) type C-2 and excavation and earth work,disposal of suplus spoil to a dstance not exceeding 50mtrs all as specified and shown on electrical plate No. 3 of 2009 (Part-I) complete all as specified. Note :- The unit rate includes for protection pipe and GI wire 4mm dia from top of earth plate up to 7.5 meter above ground level.
Supply & fixing PVC flat twin core of size 10 Sqmm complete all as specified and directed.
S&F LED bulb of capacity 10/12 watts not less than 700 lumens output at 6500K colour temp, complete all as specified and directed.
S&F Exhaust fan 300mm sweep, heavy duty, four blade, double ball bearing, 1400 RPM, minimum air delivery dishcarge 1710 CMH suitable for SP 230/250V, 50 Hz AC Supply with protective bird guard with louver shutters including grouting of frame in wall and connecting with and including 3 run 0.5 Sqmm single core, PVC insulated but sheathered FRLSH multistranded copper conductors cable from ceiling rose to exhaust fan complete all as specified and directed.
Supply and fixing Geyser 25 ltr capacity in 5 Star rating, digital display, feather touch panel, shock safe plug, incoloy glass coated element, feroglass technology, PUF insulation 0.8 Mpa high working pressure, Whirlflow technology, IPX-4 protection suitable for, 50 Hz, AC 240Volt, single phase supply, white blue with overall length approx 620 mm with wall mounting accessories & 02 Nos SS-304 connections 600 mm long complete all as specified and directed.
Supply & fixing modular socket 6A/16A, 2/3 pin combined 2 module complete all as specified and directed.
Supply & fixing modular bell push 6Amp, 1 module complete all as specified and directed.
Supply & fixing modular socket 6A, 2/3 pin combined 2 module complete all as specified and directed.
Supply & fixing modular switch 1 way 6Amp, 1 module, single pole one way complete all as specified and directed.
Supply & fixing modular switch 1 way 6Amp, 1 module, single pole two way complete all as specified and directed.
Supply & fixing modular metal flush box of 03 module complete all as specified and directed.
Supply & fixing modular metal flush box of 04 module complete all as specified and directed.
Supply & fixing modular metal flush box of 06 module complete all as specified and directed.
Supply & fixing modular white cover plate with frame of 03 module complete all as specified and directed.
Supply & fixing modular white cover plate with frame of 04 module complete all as specified and directed.
Supply & fixing modular white cover plate with frame of 06 module complete all as specified and directed.
M&L for Cutting existing steel tubing and taking up for tapping/termination of pipe line, screwing existng steel tubing of size 15mm dia, complete all as specified and directed.
Deepak Saxena
Ahmed constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .