GE863/EWS-T-43 OF 2022-23

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete, all as specified and directed.

M&L for 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm well graded stone aggregate) as in levelling course, complete, all as specified and directed.

M&L for coloured Non-skid ceramic tiles, coloured, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer of cement mortar (1:6), complete, all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D2, using 40mm well graded stone aggregate as in Sub base of flooring/ all as specified and as directed.

M&L for coloured chequered cement concrete tiles 20cm x 20cm x 25mm thick/30cm x 30cm x 25 mm thick, With grey cement and pigments, set, jointed and pointed in neat cement slurry ,over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6, over new or existing sub-base in floors complete all as specified and directed.

M&L for 75 mm thick Plain cement concrete type C2, 1:3:6 (Using 40 mm well graded stone aggregate) in plinth protections, finished even and smooth without using extra cement, complete, all as specified and directed.

Demolition of PCC block masonary built in cement mortar including all quions, arches,pillars etc but precast concrete block walling, complete, all as specified and directed

M &L for pre-cast cement concrete type C1 (1:3:6) using 20mm well graded stone aggregate as in block masonry with solid blocks, exc 10cm in width and setting in cement mortar (1:6), complete, all as specified and directed.

M&L for PCC (1:3:6) type C-1 using 20mm wlee graded stone aggregate for coping, parapaet, thrust block and other similar items, complete, all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, complete, all as specified and directed.

M & L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 using WPC 3% by weight of cement and finished surface even and smooth (without using extra cement) complete all as specified and directed. NOTE: - water proofing compound shall be measured and paid separately as 'supply only'.

M & L for rendering 10 mm thick on fair faces of brick or concrete surfaces in cement plaster 1:6 and finished even and smooth (without using extra cement), complete, all as specified and directed.

Supply only integral water proofing compound, complete, all as specified and directed.

M & L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint over one coat of primer, complete, all as specified and directed.

M & L for preparation of new plastered surface of wall and applying two coats of distemper oil emulsion over a coat of chalk whiting as a preparatory to distempering, complete, all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete, all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete, all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete, all as specified and directed.

S & F of 0.63 mm thick galvanized corrugated iron (CGI) sheeting with two corrugation side lap using grade of zinc coating -275. inclusive of both sides, fixed with ‘L’ or ‘J’ type hooks or cranked hook / bolts and washers as in roof covering etc,complete, all as specified and directed.

S&F 0.63 mm thick plain galvanised mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

M&L for Removing of old paint by paint remover or burning off by blow lamps and cleaning with scrapers, any number of coats and any width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .

M & L for preparation of new or previously untreated surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer,complete, all as specified and directed.

S&F in replacement of Mild steel barrel tower bolts, 150 mm long stove enamelled black, with bright bolt and fixed, complete, all as specified and directed.

S & F in replacement of 125 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

Hacking Out Old Broken Glass (Any Thickness,Size,Quality Or Description)From Wooden Frames Or Stone,Concrete Or Brick Surrounds,Glazed With Putty Or fixed with beads, complete, all as specified and directed.

S&F sheet glass, 4mm thick ordinary quality and glazing with oil putty or beadings in square not exc 0.5 sqm in each pane, complete, all as specified and directed.

S&F 6.3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane, complete, all as specified and directed.

Dismantling water tanks of capacity exc 500 & n exc 1000 litres and removing to store, complete, all as specified and directed.

Supply and fix new rotational moulded polyethylene water storage tank 1000 ltrs capacity (cylindrical vertical with closed top ,with screwable lid) , double layered ,ISI MARKED , hoisted and fixed in position at any height including reconnetcing/refixing of pipes inlet , out let andair pipe, including S & F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0 m m - 2 1 0 g m s ) complete all as specified and directed.

Taking up or down 20 mm bore steel water tubing and connections including cleaning for refixing or removing to store, complete, all as specified and directed.

S & F 20 mm bore tubes 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors, complete, all as specified and directed.

Refixing of old steel tubing of 20 mm bore and connections in new or old position (walls, ceiling, floors etc), complete, all as specified and directed.

Taking up or down 15 mm bore steel water tubing and connections including cleaning for refixing or removing to store, complete, all as specified and directed.

S & F 15 mm bore tubes 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors, complete, all as specified and directed.

Refixing of old steel tubing of 15 mm bore and connections in new or old position (walls, ceiling, floors etc), complete, all as specified and directed.

S&F in replacement of 20 mm Stop valves Fancy type CP, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete, all as specified and directed.

S & F in replacement of 15mm bore bib taps, chromium plated, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.

S&F in replacement of brass CP mixer for mixing hot and cold water screwed down for iron pipe and fixed, complete, all as specified and directed.

S & F in replacement of PVC connections 15mm size with PTMT nuts of length 450 mm, complete, all as specified and directed.

S&F in replacement of Wash basins 550x400mm vitreous china (flat back type) any size incl cutting for and pinning in end of brackets for erecting stand but exclusive of fixing of supply and waste pipe but including waste fittings complete all as specified and directed.

Supply and fixing in replacement of existing water closet (squatt pattern) and foot rest with vitreous china (white) first quality water closet, Orissa pattern size 580x440mm with integral foot rests, including 100mm cast iron 'P' or 'S' trap and 100mm cast iron sanitary connection socket to fit WC outlet , making good the disturbed floor surfaces to match with existing and making connections serviceable, complete, all as specified and directed

S&F in replacement of PVC valveless, syphonic action type flushing cistern, low level , white, with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern for 10 litres capacity complete all as specified and directed.

S&F in replacement of vitreous bowl urinal flat back size 465mmx355mmx265mm, white with grating and union for discharge pipe complete incl fixing plug, bedding, urinal agent wall in CM 1:2 securing urinal to plug pointing around back in cement with bracket flush pipe grating and union for drainage pipe etc, complete, all as specifie and directed.

S & F in replacement of Soap dish, any type, fixed to plugs with chromium plated brass screws embedded in the wall all as specified and directed.

S&F in replacement of Towel Rail 600 mm long of PTMT fixed with and including Chromimum plated brass screws and wooden plastic cleats (Min weight 190 gms), complete, all as specified and directed.

M & L PVC (SWR) floor trap 75 mm dia of outlet , plain with grating including jointing with solvent cement, complete, all as specified and directed.

S & F in replacement of Glass shelf with Sheet Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard ,and railing 60 cm long, complete, all as specified and directed.

S&F in replacement of 110 mm bore PVC (SWR) Soil, waste and vent pipes sinlge socketed in any length with rubber ring joints laid in floors or trenches, complete, all as specified and directed.

S&F in replacement of 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring laid in floors or trenches, complete, all as specified and directed.

S&F 110 mm size PVC(SWR) Junction single, (Single T) equal or unequal, complete, all as specified and directed.

S&F 75 mm size PVC (SWR) junction single, (Single T) equal or unequal, complete, all as specified and directed.

S & F in replacement of stop valve/angle valve, 15mm dia chromium plated, fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete, all as specified and directed.

Dismantling of wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards / slabs / blankets, any thickness including cover fillet, complete, all as specified and directed

Dismantling timber scantlings 40 sq.cm and over in section, in any positions as in unframed work, complete, all as specified and directed.

Dismantling of framed fillets, rails, posts, rafters, purlins etc., under 40 Sqcm in section complete all as specified and directed.

M & L for second class hardwood plain fillets, square, rectangular or triangular in section, wrought secured with screws, cross sectional area exc 13 & n .exc 25 sq cm, complete, all as specified and directed.

M & L for second class hardwood clean sawn scantlings as in timber framed and fixed, complete, all as specified and directed.

M&L for 9 mm thick veneered decorative plywood, grade 1(with BWR resin) with decorative face veneers on only one face has decorative veneer fixed to timber frame work, complete, all as specified and directed.

Dismantling floor, hearth or wall tiles including cement mortar, concrete bedding and removing rubbish off the premises, complete, all as specified and directed.

S&F in replacement of 20 mm dia aluminium alloy anodised cutrain rails with brackets fixed, complete, all as specified and directed.

M&L coloured Glazed ceramic tiles in vertical surfaces 350 x 250 x7 mm/ 450 x 350 x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid over & including rendering 10mm thick in cement mortar (1:4) on stone masonry/Block masonry surfaces or surfaces other than fair face of brick work to receive glazed tiles, complete, all as specified and directed.

M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar (1:6), complete, all as specified and directed.

M & L for machine cut kota stone slab flooring 20 to 25 mm thick over and including 20 mm thick screed bed laid in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and morror polishing, complete, all as specified and directed.

M&L for washing rubbing down and applying of two coat of cement base paint to old surfaces of walls, complete, all as specified and directed.

M & L for preparation of old plastered surface of wall and applying two coats of distemper oil emulsion over a coat of chalk whiting as a preparatory to distempering, complete, all as specified and directed.

S&F Hat and coat hooks, solid body brass, 175 mm to 250 mm, complete, all as specified and directed.

Taking down chowkats or frames not exc 1.5 sq.m each but with shutters (without taking off shutters from the frames) including removing from site, complete, all as specified and directed.

Taking down chowkats or frames exc 1.5 sq.m but n.exc 4 sq.m each but with shutters (without taking off shutters from the frames). including removing from site, complete, all as specified and directed.

Taking down shutters exc 1 Sqm but n. exc 2 Sqm each including removing from site, complete, all as specified and directed.

S & F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete, all as specified and directed.

S & F second class hardwood 35 mm thick plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers and fitted to chowkats, complete, all as specified and directed.

S & F of 35 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without shash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and sizes of the members of shutters as specified in clause No . 8.24 (a) of MES schedule part – I (Specifications - 2009), supplied and fitted to chowkhats, complete, all as specified and directed.

S&F steel windows for industrial buildings, fixed type, with glazing bars, complete, all as specified and directed.

M & L for preparation of new wooden surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of prink primer, complete, all as specified and directed.

S&F Mild steel barrel tower bolts 150 mm long, stove enamelled black, with bright bolt and fixed, complete, all as specified and directed.

S & F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with overall length of vover plate 140 mm, complete, all as specified and directed.

S & F mild steel sliding door bolts, plate type, stove enamelled black withbright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed .Length of bolt 300mm, complete, all as specified and directed.

S & F 125mm butt hinges, medium weight, cold rolled mild steel and fixed,complete, all as specified and directed.

S & F 125 mm long Extruded Aluminium alloy handles, fabricated type, anodised, complete, all as specified and directed.

S & F mild steel 300mm ordinary rat tail rod pattern springs, including roller and roller plate, complete, all as specified and directed.

S & F galvanised mild steel wire cloth , 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staples, complete, all as specified and directed.

Taking down carefully copper/aluminium point wiring from existing points (light, fan, socket or power) alongwith compete fittings such as switches ,ceiling rose, pendent holder, sketch fitting & regulator etc including making good to the disturbed surfaces of wall, roof and floor etc to match with the existing surfaces, complete, all as specified and directed.

M&L for point wiring using approved colour coding as per IS with using 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continuous earthing in & incl PVC casing & capping with accessories having ISI mark fixed on wall surfaces / ceiling including provision of 2 mm thick sheet metal terminal box with 3 mm thick hylam laminated sheet on top for fixing switches sockets etc. all as specified for one light point/ fan Bell point controlled by one switch, complete, all as specified and directed by Engineer-in-charge.

All as per Srl item No 84 here-in-before but controlled with one 3 pin socket outlet 5 Amp on the independent board with other switches with cables 1.5 Sqmm, complete, all as per specified and directed by Engineer-in-charge.

All as per Srl item No 84 here-in-before but controlled with one 3 pin socket outlet 15 Amp, independent board with other switches with cable 2.5 Sqmm, complete, all as per specified and directed by Engineer-in-charge.

All as per Srl item No 84 here-in-before but controlled with one 3 pin socket outlet 15 Amp, independent board with other switches with cable 4 Sqmm, complete, all as per specified and directed by Engineer-in-charge.

All as per Srl item No 84 here-in-before but controlled with one 3 pin socket outlet 5 Amp on the same board with other switches with cables 1.5 Sqmm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of switch piano type 5 Amp, 230 Volt, flush button single pole one way, complete, all as specified and directed by Engineer-in-charge.

Supply and fixing of socket outlet 3 pin 5 Amp 2-in-one 230 Volt flush type, complete, all as specified and directed by Engineer-in-charge.

Supply and fixing switch piano type 15 Amp, 230 Volt, flush button single pole one way, complete, all as specified and directed by Engineer-in-charge.

Supply and fixing socket outlet 3 pin 15 Amp 2-in-one 230 Volt flush type, complete, all as specified and directed by Engineer-in-charge.

M&L Ceiling rose, 3 terminal with ISI mark all as specified and directed by Engineer-in-charge.

S&F in replacement LED integrated batten tube light fittings 20W 4 Feet long complete with twin core twisted flexible copper conductor cable complete all as specfied and directed. Make Crompton Model -Trimline LDL-20CDL or equivalent in Philips/Bajaj / Wipro.

Supply and fix Bajaj LED Bulk head light fittings, 10 W cool white, color temperature 3500-4100K wall mounting type complete all as specifed and directed of equavalent make : CG/Philips/wipro etc.

Supply and fixing in replacement of sheet metal enclosure double door for DBs single pole and neutral for 4 way 240 volt complete all as specified and directed by Engineer-in-Charge .

Supply and fix in replacement of Sheet metal enclosure for DBs 2 way, single door, 240 Volt, complete, all as specified and directed.

Supply and fixing sheet metal enclosure , Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of Capacity 20 Amp complete all as specified and directed.

Supply and fixing in replacement of MCB SPN 32 amps 230V complete all as specified and direct by Engineer-in-Charge .

S&F in replacement of MCB SP 6 Amp to 32 Amp, 240 Volts , 10 KA. Make : Havells / Legrand/ Sehneider/L&T or equavalent approved Make.

Supply and fixing in replacement of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning, complete, all as specified and directed.

Supply and fixing in replacement of 1100 Volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cable flat or circular of size 16 Sqmm complete

Supply and fixing 1100 Volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cable flat or circular of size 10 Sqmm complete, all as specified and directed.

M & L for sub main wiring in PVC casing and caping with 2 x 4.0 Sqmm +1 x 2.5 sqmm earth wire complete all as specified and directed.

M & L for Earthing complete with galvanised steel earth plate electrode 600x600x6.0mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire of 4.0 mm dia as earth continuity coductor by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR-I 2010, connected to main switch board all as specified and including testing on completion. Necessary excavation, earthwork, PCC works and CI earth pit cover with watering pipe 20 mm dia GI Pipe medium grade, funnel with wire mesh and lugs GI Pipe of 15 mm dia of light grade for protection of earth wire upto 7.5 Mtr complete all as specified and directed by Engineer - in - Charge.

S&F for lamp holder, PVC/ Polycarbonate type with back plate suitable of batten fittings, complete, all as specified and directed.

Supply and fixing LED Lamp 12 Watt in lamp (Bulb) holder complete all as specified and directed. (Make-Crompton Cat No. B22/E27-CDL or equivalent in wipro/Havells/Philips.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc, all as specified and directed.

Note:- The total shall subject to adjustment of credit of Rs 48940.00 for old Materials as per Schedule of Credit.

NSK TRADER

M/S SHIV NATH ENTERPRISES

M/S Shamsher Negi Dewa