MAINT REPAIR REPLACEMENT OF LED STREET LIGHT AND CONNECTED ITEMS CABLES ETC AT OTM AND MD ACCN AUNDH AREA UNDER GE MH AND RH KHADKI

Amount

Excavating in trenches not exc 1.5m wide and not exc 1.5m in depth for laying UG cable, pipe line, foundation of poles etc and getting out in soft / loose soil complete all as specified and directed.

Excavating in trenches not exc 1.5m wide and not exc 1.5m in depth for laying UG cable, pipe line, foundation of poles etc and getting out in hard / dense soil complete all as specified and directed.

Returning, filling, incl spreading levelling, watering and well ramming in layers not exc 25cm all as specified and directed by Engr-in-Charge.

Removing excavated material to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above starting point complete all as specified & dierected.

M&L for riddled earth cushioning to under ground cable in trenches / existing cable trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable complete all as specified and directed by Engr in charge. Note:- Measurement shall be taken after gentling punning.

Supply and laying reinforced precast concrete cable cover class LV, type 2, flat of size 250mm x 150mm x 40mm size for cable protection.

Taking down unserviceable cable of any size upto 50 Sqmm carefully from trenches/poles/ducts all as specified and directed by Engr-in-Charge.

Material and labour for fixing or passing through pipe or laid in trenches or fixed to pole/wall or fixed to LT panel board, insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of size 10 sqmm 2 core incl suitable end terminations with cable glands, aluminium lugs, sleeves as required complete all as specified and directed by Engr-in-charge.

Material and labour for fixing or passing through pipe or laid in trenches or fixed to pole/wall or fixed to LT panel board, insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of size 16 sqmm 2 core incl suitable end terminations with cable glands, aluminium lugs, sleeves as required complete all as specified and directed by Engr-in-charge.

Material and labour for fixing or passing through pipe or laid in trenches or fixed to pole/wall or fixed to LT panel board, insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of size 25 sqmm 3.5 core incl suitable end terminations with cable glands, aluminium lugs, sleeves as required ccomplete all as specified and directed by Engr-in-charge.

Material and labour for fixing or passing through pipe or laid in trenches or fixed to pole/wall or fixed to LT panel board, insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of size 50 sqmm 3.5 core incl suitable end terminations with cable glands, aluminium lugs, sleeves as required complete all as specified and directed by Engr-in-charge.

S&F in replacement of old steel tubular swaged pole complete with cast iron base plate , finial taper plug bolts nuts and screws as specified type 410 SP-31 (9m long) confirming to IS : 2713 and made out of structural steel tube confirming to IS: 1161 and painted internally with a coat of bituminous paint and externally one primer coat, one under coat and one finishing coat of aluminium paint as specified. Note : Excavation and earth work and PCC will be measured and paid separately.

S&F ACSR conductor incl jointing with existing conductor and stringing on LT pole and proper fastening to pin/shackle insulators with aluminium binding wires and required jumpering connection all as directed

S&F rigid PVC line separator suitable for 2 wire, made from high grade PVC material, distance but phase to phase 300mm, suitable for use with 1100 volts grade. Make- Shree Balaji Power Plast/Goyal Power Plast

S & F in repair light grade GI pipe of size 80 mm dia conforming to IS 1239 (Part-1): 2004 laid in trenchs or under floors or fixed on pole for cable protection complete all as specified and directed by Engr - in - Charge.

S & F in repair light grade GI pipe of size 40 mm dia conforming to IS 1239 (Part-1): 2004 laid in trenchs or under floors or fixed on pole for cable protection complete all as specified and directed by Engr - in - Charge.

Material and labour for Earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI earth strip 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 40 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and chaarcoal filling, necessary excavation and earth work complete. Note : Rate of item is deemed to be included for excavation in hard rock, by compressor machine to achieve required depth.

M & L for detection of street light cable fault of with and including technician, cable fault location kit at AUNDH (MD Accn & OTM) detect the cable fault, incl necessary excavation of soil / road, hard standing, foot path and refilling the soil, after joint the faulty cable with new straight through joint kit, testing of cable all as specified and directed Note: Cable joint of required size shall be measured and paid separately under relevant item of this BOQ as S&F.

Supply and fix joint, heat shrinkable type straight through joints for joint LT UG cable 1100 volts grade of size 10-16 sqmm, 4 core, all as specified and as directed.

Supply and fix joint heat shrinkable type straight through joints for joint LT UG Cable 1100 volts grade of size 25-50 sqmm, 4/3.5 core, all as specified and as directed.

Taking down old unserviceable CT coil and S & F CT coil up to 5 A of capacity all as directed by Engr-in-Charge.

Supply and fixing in repairs MCB, 4 pole "B" curve, 40 amps, making cutting of existing panel for fixing MCB on suitable fitting and making panel good to match with existing complete all as directed by Engr-in-charge.

Supply and fixing in repairs MCB, single pole, 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 2 AMP, in the MCB DB/SMC Junction Box Complete with connection testing and commissioning.on suitable fitting and making panel good to match with existing and all as directed by Engr-in-charge.

M & L for trimming of branches of trees with in 1.5 mtr on either side of the electric lines/poles with suitable T & P and disposing the waste as directed and as specified. Note : Measurement for triming of tree branches shall be measured once only for entire period of completion.

M&L for road cutting / foot path and making good with PCC M-10 grade (nominal mix) using 40 mm graded stone aggregate of 150mm X 100mm inrespect of width and thickness complete all as specified and directed.

S and F brass terminal of capacity 100Amp 4 pole complete with nut, bolts, washer, complete with backlite/ fibre insulator complete including fixing inside street light junction box complete all as specified and directed .

Supply and fix indicator lamp LED type complete all as specified and directed.

S & F in repairs LED dimmable steert Light 60 W Highly efficient LED street light made of pressure die cast aluminium housing with HIGH POWER LEDs, lens & toughened glass,IP66,, complete & wired with all accessoires. Make: Halonix Cat part No :HLSLD-15-60CWL-R /Wirpro/Jaguar

S & F in repairs LED dimmable street Light 90W Highly efficient LED street light made of pressure die cast aluminium housing with HIGH POWER LEDs, lens & toughened glass, IP66, complete & wired with all accessoires. Make: Halonix Cat part No:HLSLD-MLC04-90-CWL /Wirpro/ Jaguar

S & F in repairs LED flood light 60 W, made up of pressure die cast aluminium housing with toughened glass and high power LEDs , IP 66, complete & wired with all accessoires. Make: Halonix Cat part No - HLFLD-ML21-60-CWL/ Wirpro/ Jaguar or equivalent make

S & F in repairs LED flood light 120 W, made up of pressure die cast aluminium housing with toughened glass and high power LEDs , IP 66, complete & wired with all accessoires. Make: Halonix Cat Part No:HLFLD-ML01-120-CWL-R/ Wirpro/ Jaguar or equivalent make

M & L for repairing of street light fitting/luminaries of any size/type control wiring including replacement of LED drivers 45/60/90 W, fittings of any type and capacity, checking the continuity from pole to pole junction boxes all as directed by Engr-in-charge. Note: (i) Driver shall be measrued and paid separately as supply only. (ii) Make / capacity shall be same as of existing driver.

Supply only LED drivers for suitable for extsting street light /flood LED fitting of any capacity & make upto 120W fitting on pole complete all as specified and directed.

Supply and fix sheet moulding compound(SMC) Junction box size 185x 165 x 60 mm inner dimension, Hinged door, including three phase 100 Amps 4 pole baklite terminals for street light control mounted on pole with the provision of cable entry and exit. Make: Sintex / L & T or equivalent make

Dismantling unserviceable time & switch and S & F Analog time & switch with 150 hrs of battery backup all as specified and as directed. Make: L & T/Havells/Legrand

Repair to pole coping with PCC M-10 grade (nominal mix) using 40 mm graded stone aggregrate, rendering 10 mm thick in CM 1:4 with using extra cement & applying one coat of white wash complete all as specified and as directed.

M & L for checking the solar light , charging of batteries, cleaning the surface of the solar panel, terminals etc and maintaining the serviceability throughout the period of contract complete all as specified and as directed

Supply and replace DC Charging with control unit for solar street light panel all as specified and as directed.

Supply and replace high effiency solar street light panel of capacity 110W all as specified and as directed.

Supply and replace solar street light 20 W with inbuilt litheum ionbattery 12.8 V, 54 AH all as specified and as directed. Make: Exide/Amron or Equilent make

Supply and replace GI tube of size 80 mm bore, 6 Mtr long for solar street light complete all as specified and as directed.

M & L for painting of solar street light poles with two coats of aluminium paint including preparation of steel surfaces complete all as specified & directed.

M & L repair and replacement of LED post top triangular, with cast aluminium housing with acrylic diffuser bollard light of 10 W complete with accessories all as specified and directed. Make: Halonix Cat Part No: HLOB-05-10-CW/Wipro/Havells

M & L for repair and replacement of LED post top gate light 25 W aluminium housing, clear acrylic diffuser, cast aluminium pole -cap complete with accessoires with suitable size 60 mm outer dia GI pipe and making good the dismantled surface to match the existing all as specified and directed. Make : Halonix Cat Part No: HLPT-04-25CW/Wipro/Havells

M & L for preparing old painted steel surfaces and applying two coats of aluminium paint to 9 mtr long steel tubular street light poles complete with connected fittings such as brackets and writing the pole number with black enamelled paint of 25mm high letters on 10 cm dia circle in white paint complete all as directed.

M & L for preparing old painted steel surfaces and applying two coats of aluminium paint to 11 mtr long steel tubular street light poles complete with connected fittings such as brackets and writing the pole number with black enamelled paint of 25mm high letters on 10 cm dia circle in white paint complete all as directed.

M & L for preparing old painted steel surfaces and applying two coats of aluminium paint to 11 mtr long steel tubular street light swan neck poles complete with connected fittings such as brackets and writing the pole number with black enamelled paint of 25mm high letters on 10 cm dia circle in white paint complete all as directed.

M & L for submain wiring to pole wiring with two run of 1.50 sqmm FRLS PVC sheathed multi stranded copper conductor cable and one run of 1.5sqmm FRLS PVC sheathed multi stranded copper conductor cable as earth wire, from street light fitting to looping box thorugh inside pole and necessary cutting for making hole on pole including taking down old unserviceable wiring complete all as specified and directed by Engineer-in-Charge.

M & L for PCC M-10 grade (nominal mix) using 40mm graded stone aggregrate as in foundation for filling in, mass concrete for foundation of pole, transformer, panel board, stay, post top lantern, repairs to road cutting, drain path etc complete all as specified and as directed.

M & L for PCC M-15 grade (nominal mix) using 20mm graded stone aggregrate as in coping of new pole including necessary form work complete all as specified and as directed.

SKS Electricals

Adinath Technical Services

N D ELECTRICAL

ONKAR ELECTRIC AND GENERAL STORE

Mahindra Electric Stores