SPL REPAIR TO USMAAN AUDITORIUM, CENTRAL INSITUTE OF 50 (I) PARA BDE UNDER GE (EAST) AGRA

Removing of push back seats carefully from Existing place and shifting and loading complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings not otherwise specifically provided for complete all as specified and directed.

Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

Taking down cement or cement lime plaster of any discription on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarsesand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement persquare metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size)in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings over a coat of acrylic polymer complete all as specified (Paymentforproviding grooves shall be made separately), complete all as specified and directed

M&L for replacement of sub main wiring using two 2x6 sqmm single core PVC insulated, unsheathed stranded copper conductor cable of voltage rating upto and including 1100 Volts drawn in and including concealed/surface, PVC conduit (Medium grade) as required dia with standard accessories along-with one run of PVC(green colour) insulated , unsheathed, stranded copper conductor of size 1x 6 sqmm as earth continuity conductor connected to earth dolly including taking down old unsv submain wiring complete all as specified and directed. (NOTE : Two run of single core PVC cable with one run of earth conductor and conduit /batten shall be measured as one unit.)

S & F Wall mounting fan, electric driven single phase 230 volts, oscillating type, 400 mm sweep, high quality ABS base with high speed motor and balanced blades with three leafed and 3 core copper cable of suitable size complete all as specified and directed.

Supply and fixing GI Hot Dip/powder coated perforated type cable tray of size 100mm in width, 50mm in height made of 18 SWG (Approx .20mm) including all necessary fittings such as Tee, Cross, Horizontal/Vertical Bend, coupler plates, 'C' Channel, 'Z' Section, Rod, Anchor Fastner, Cable tie etc complete all as specified and directed. Note: (i) The work should be executed at the top of appx 25m height of building outer walls.

S&F mild steel joist channel angle or tee sections fixed independently with out connecting plates etcof grade Fe-410-W (Gde E-250 quality B) complete all as specified and directed..

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7mm to 8mm thick, area of each tile exc 0.11 Sqm but n. exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10 mm thick cement mortar (1:6) screed bed for floor finishes complete all as specified complete all as specified.

M&L 25 mm thick PCC 1:2:4 type B-0 (using 20 mm graded stone aggregate) as in sub base of flooring finished even and fair without using extra cement complete all as specified & directed.

M&L for two coat water based premium acrylic smooth exterior paint of approved Colour with silicon additive & Colour stay Technology. Excellent Dit Pick up resistance With low VOC less than 50 gram/ lite as per the LEEDS specifications, Anti Algal Properties in two coats @ 1.79 Itr (undiluted)/ 10 sqm diluted with water as per Manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 Ir per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed. Note:- (a.) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer. (b) Masking of window/doors during spray painting using polythene film will be included. (c) Rate quotated includes work at any height (not.exc 10 mtr) incl necessary scaffolding /Centreing etc and cleaning the waste materials and debris from out of MoD land as directed and complete.

M&L in replacement for earthing complete with galvanized earth plate electrode 600 x 600 x6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level ) with top edge of the plate not less than 1.50 M below normal ground level , connected to and including galvanized steel wire 4mm dia as earth lead soldered and riveted to earth plate by means of nuts, bolts, check nuts & washers, of galvanized iron or steel with connected to test point and testing on completion including 15mm GI light grade pipe for earth lead protection from earth point to earth plate, including provn adequate quantity of charcoal dust mixed with 35 % common salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate with 20mm bore medium grade GI Pipe for watering,GI check nut, funnel and wire mesh with and including all necessary excavation & earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre,,PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 and as directed. NOTES:-(i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor.

M&L for 15mm thick ready mix plasterfor Internal surface is a specially designed ready to use cement based plaster with high quality polymer additives and well graded sand and fillers which can be used for plastering on bricks, block, stone walls over a coat of single component polymer as well as concrete surfaces. complete all as specified and directed.

Providing and fixing in position wall paneling at all heights with 10 mm thick fully perforated Square edgeGRG (Glass Fibre Reinforced Gypsum) panels/tiles of size 595 x 595mm of approved texture, design and patterns BIS-compliant GRG tiles conforming to IS:2095 Part3, 2022 having moisture content less than 2%, humidity resistance of 99%, NRC 0.70 to 0.85 as per IS 8225.1987, Non Combustible as per BS 476 (Part 4)-1970 and light Reflectance of 90% (Minimum), comprising of a frame made from especially fabricated galvanized mild steel sheet 0.50 mm thick pressed section(galvanizing @120 grams per sqm including both sides) i.e. vertical studs of size 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceiling channel section of size 50 x 32m fixed to the floor and soffit at 600mm centers using 12mm dia, 50mm long wedge type expanded zinc alloy dash fastener with 10mm bolt. This same channel is then to be fixed in horizontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. Glass wool of 50mm thickness is then to be inserted in the slots and finally GRG (Glass Reinforced Gypsum) non combustible panels/tiles are to be screw fixed with self Tapping pan head nickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an even groove of 1 mm between the panels. The joints between the panels are to be duly jointed and finished using recommended jointing compound and fiber joint tape roll 50mm wide (90 meter) roll and two coats of primer suitable for panelingwith backing of 50mm 1000 GSM thick obsorb wool tested as per fire retradant IS 15061-2002 for excellent results as per manufacturer's specification as Per direction of Engineer-in-Charge .

PCC 1:3:6 C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection ( 75 mm thick ) laying in alternate ways finished even and smooth without using extra cement incl demolition all as specified.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings in roof cobvering complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet AZ - 150 thickness of sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall complete all as specified and directed.

S & F PVC wall lining consisting of 8-10 mm thick wooden grain printed PVC sheet inclusive of solvent cement and fixing channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, at site on wall/ceiling as per specification and complete all as specified and directed.

S & F in repairs 15 mm bore chromium plated fancy bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F factory made uPVC white colour three track three panels sliding window with fly proof SS wire mesh(Two nos glazed & one no wire mesh panels) up to 1.50m height made of (big series) frame 116 x 45mm & sash 46 x 62mm both having wall thickness of 2.3 (+ or -) 2mm and single glazing bead/double glazing beads of appropriate dimension. (area of window above 1.75Sqm ) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profile duly reinforced with 1.60 thick galvanised mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing bead sand uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated ) touch locks with hook, zinc allo body with single nylon rollers (weightbearing capacity to be 40 Kg) , GI fastener 100 x 8mm size for fixing frame to finished wall and necessary stainless steel screws, etc. profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fiximg hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and incl 4mm thick cooling glass and stainless steel wire mesh of approved quality complete all as specified and directed.

M&L for applying two coats of Professional Ultima Stretch paint on new decorated wall surfaces over 2 mm thick wall care putty including complete removal of existing treatment with mechanical complete all as specified and directed. Note :- This item will be used specifically for picture screen only.

S & F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed.

M&L Glazed ceramic coloured tiles in vertical surfaces of size 350 x 250x 7mm /450mm x 350mm x7mm thick set and jointed in neat cement slurry over 10 mm thick rendering in CM 1:4 for receiving the tiles complete all as specified complete all as specified.

Supplying and laying 25 mm outer diameter of CPVC pipes SDR 11 including CPVC Brass fittings (Brass elbow, Brass Tee, MTBA, FTBA etc), Unions, Ball valves, Flange and tank adaptor or necessary fittings on walls/ceiling or laying in floors complete all as specified.

Refixing the shutters of any description exc 1.00 Sqm but not exc. 2 Sqm each in the same opening or in other opening complete all as specified and directed.

Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 174 of SSR 2020 (Part-II)

All as per item No.42 above but 20mm bore

S & F Solid PVC door frame for PVC doors, Kitchen cabinet of size 50mm x 47mm made out of 5mm PVC sheet reinforced with MS square tube, as shown on drawings as per manufacturers specification complete all as specified and directed.

S&F in repairs Rotational moulded polyethylene water storage tanks ISI mark engraved with cover (cylindrical vertical with closed threaded top) hoisted and fixed in position including fittings all as specified in SSR Part I (Capacity in litres 1000) Including taking down complete all as specified and directed.

S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

Supply & fix in repairs Vitreous China Squatting pan “ORISSA PATTERN” size- 580x440mm white with integral foot rest complete including provn of lime concrete bedding complete all as specified and directed.

Supply and fix in repairs CP brass central hole basin mixture screwed for 15 mm dia pipes including PVC connection etc complete etc complete all as specified and directed

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts complete all as specified and directed.

S & F Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps, plain angle cleats for securing purlins and similar small articles confirming to Fe-410-w (Gde-E250) quality B complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layer n.exc 25 cm thick in each layer all as specified and directed.

S & F Brass magnet catcher suitable for CB/cabinet shutter complete all as spd and directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar including concrete bedding and haunching complete all as specified and directed for 150mm bore of pipe

M&L PCC 1:4:8 type D-2, using 40mm graded stone aggregate as in bed of drain pipe including packing under and haunching against the sides of pipes after they are laid and tested for the 150mm dia of pipe complete all as specified and directed

S & F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as spd and directed.

e all as specified and directed.

M&L for providing and injecting chemical emulsion for post constructional antitermite treatment along the internal / external wall and wooden cup board, shelves etc wooden area should drill by 6 mm, bit, gap between two holes is 30 cm to 45 cm internal / external wall skirting level should drill by 8/10/12 mm bit, grap between two holes is 45 cm to 60 cm, filing the holes by 100 ml to 150 ml dilution of chemical emulsion in two stage . In 3rd stage close the holes by white cement and finishes with existing surfaces. The ATT chemical should be odorless and mixed formulation should be injected at the rate of 5 ltr per sqm. The ATT chemical should contains. (i) Byfinthrin 20% EC (smell Chemical) (ii) CHLORPYRIPHOS 20% EC (Smell Chemical) (iii) lmidacloprid 30.5 % (Odor less Chemical) The work pertaining to ATT shall be executed from authorized applicator through manufacturer of which the materials is proposed to be used by the contractor and approved by GE. 02 year guarantee of ATT work will be admissible after date of completion and 10% amount will be reserve against ATT work after date of completion for the 02 year.

M & L for Brushbond RFX Elastomeric polymer modified cemtentitious waterproofing coating used for waterproofing of extg and new naked bricks surface complete all as spd and directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on wooden surface over 10 cm width or girth including preparation of new or previously untreated wood surfaces complete all as specified and directed.

Closing bolt holes etc in old corrugated sheets by sealing with one bitumen and one curved GI washer on either side and 6 MM GI bolts and nuts,all set in stiff white lead all as specefied and directed.

Taking down carefully existing unserviceable copper / aluminum point wiring of any description & in any position with and ncluding taking out existing unserviceable conduits or battens of any description with sunken boxes/junction boxes and all fitting, accessories & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc but excluding tube light fittings and making good the disturbed surface of walls, floors, ceiling etc to match with the existing surfaces complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with cli complete all as specified and directed.

(b) One 5 pin socket outlet 5 Amps on same board

(c) One 5 pin socket outlet 5 Amps on independent board

M&L in repair Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 20 mm thick cement mortar (1:6) screed bed for floor finishes & grinding and polishing complete all as specified and directed.

Removing of surplus soil excavated materials to a distance exceeding 50 M but not exc 100M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on new steel surface 10 cm width or girth including preparation of surfaces complete all as specified and directed.

Supply and fixing modular socket outlet 2/3 pin 6 Amps combined 2 module, complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on old steel surface 10 cm width or girth including preparation of surfaces complete all as specified and directed.

Supplying & fixing for ceiling rose PVC Polycarbonate isolated body 62.5 x 25 mm, three terminals, complete all as specified & directed.

Supply and fixing modular cover plate with metal frame (inner and outer) 2 module for mounting switch and sockets all as specified and as directed.

Supply and fixing modular cover plate with metal frame (inner and outer) 3 module for mounting switch and sockets all as specified and as directed.

Supply and fixing modular cover plate with metal frame (inner and outer) 8 module for mounting switch and sockets all as specified and as directed.

M&L point wiring with 1.5 sqmm multi stranded copper conductor 1100 volts grade FRLSH PVC insulated unsheathed cable with proper colour coding drawn in including PVC concealed conduit not less than 20 mm dia with all accessories and FRLSH PVC insulated 1.5 Sqmm multi standard unsheathed copper wire for continues earth, including cutting and chasing of wall surface for laying PVC conduit and modular sunken box of suitable module as per site requirement not less than 1.6mm thick and connecting earth and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles. Note:- Conduit shall be fixed on surface of roof with necessary saddles where concealing of conduit is not feasible at no extra cost for the following :- (a) One light /fan point controlled by one switch

S&F in repair Inverter LED batten with square profile and polycarbonate channel. Lithium Ion battery with charging time 8hours-10 hours and back up time upto 4 hours, high optically efficient polycarbonate diffuser, in built electronic driver duly wired upto terminal block, power consumption <20W (Approx 4 feet 20W) luminaire complete all as specified and directed.

All as per item No 106 here in before but with cable size 4 Sq mm for one 5 pin 15/16 Amps socket out let on independent board and multistrand insulated copper earth continuity conductor of size 4 sqmm all as specified and directed by Engr-in-Charge.

Supply and fixing in repair LED luminaire 595 mm x 595 mm, 36 watt, 220 V AC, 6500 K surface/ recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver and connecting the same to electric source with & using PVC sheathed and insulated three core copper conductor cable of size 0.75 Sqmm and fixing arrangements for fixing the light fitting complete all as specified and directed.

Per 100 Nos

S & F LED Square Step light 3W construction in die-casted aluminum powder coated, integrated LED ensures long-lasting and energy efficient with IP65 Protected including fix properly concealed in each

Supply and fixing blank spacer plate for single module complete all as specified and directed.

Supply & Fixing LED Recess Down Light with smart Sensor, 15 watts with inbuilt Microwave motion Technology for providing an energy efficient solution with auto dimming option from 100% to 25% of the rated wattage on sensing of movement and connecting up with 2/3 core flexible copper conductor cable of suitable size from light source complete all as specified and directed.

S&F LED 10 watts bollard Mushroom shape warm white with robust IP 65 rating design, Height-0.80m and efficient light distribution including light fitting fixing and making PCC block foundation of size 250x250x250mm with concrete cement and connecting the fittings on PCC foundation block with suitable size of fastner complete all as specified and directed. Note:-The period of defects liability shall be 02 Years from the date of installation of Bollard light complete all as specified and directed.

Supply and fix in repair post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed.

Supply and fix ON LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 250 Amps including fixing on walls, complete all as specified and directed.

Supply and fixing in repair Single pole and neutral modular type enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amp, complete all as specified and directed.

Supply and fixing in repair MCB SP 6 to 32 Amp ('C' curve) having short circuit rating 10KA, 240 volts complete with connection testing and commissioning. Complete all as specified and directed.

Supply and fixing in repair MCB SPN 40 to 63 Amp ('C' curve) having short circuit rating 10KA, 240 volts complete with connection testing and commissioning. Complete all as specified and directed.

step complete all as specified and directed.

M&L for Circuit/Submain Wiring with two single core FRLSH PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x1.5 sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 1x1.5 sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in PVC Conduit heavy grade not less 20mm dia including dismantling of old unsv submain wiring including fittings and fixtures complete all as specified and directed by Engineer-in-charge. Note: (i) The work should be executed at the top of appx 25m height

of building. (ii) Two run of single core PVC cable with one run of earth conductor and one run conduit /batten shall be measured as one unit.)

S & F LED Exit Signage light 3W in CRCA powder coated with clear acrylic, screen printed/Etching/Deep engraving display complete all as specified and directed.

Supply and fixing MCB DB single pole with neutral sheet metal enclosure double door type, 240Volts AC, with appropriate size bus bar and common neutral link all en-closed in standard steel sheet flush mounting type factory fab-ricated, powder coated complete with out MCB and with enclo-sure blank plates for unused way suitable for 12 way ISI marked, including taking down old unsv MCB DB and MCBs complete all as specified and directed.

S&F Aluminium alloy, anodised, 300 mm sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts complete all as specified and directed.