ADDITION/ALTERATION TO BLDG NO P-327 AND PROVN OF POL STORE TO CCC ,CONSTRUCTION OF COVER SHED FOR WCDMA SHELTER IN AFCEL NODE AT HQTC(U)

Amount

Site clearance including clearing away all grass vegetation, saplings, shrubs, brushwood, under growth, and removing rubbish upto a distance of 50 metres outside the periphery of the area complete all as specified and directed.

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth for foundation,etc or for shafts wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed.

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m depth for foundation manholes etc and getting out in hard/dense soil complete all as specified and directed.

Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/ loose soil complete all as specified and directed.

Returning , filling in including spreading , levelling , watering and well ramming in layers not exc 25 cm in solft/loose soil complete all as specified and directed.

Removal of surplus soil (excavated soil) to distance not exceeding 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and directed.

Spreading and levelling earth filling in floors in layers and well ramming including watering as required complete all as specified and directed.

Surface excavation n exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in soft/ loose soil complete all as specified and directed.

M&L Hard core of guage n.exc 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Site clearance including clearing away all grass vegetation, saplings, shrubs, brushwood, under growth, and removing rubbish upto a distance of 50 metres outside the periphery of the area complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) in plinth protection, finished even and smooth w/o using extra cement complete all as specified and directed.

M&L 100 mm thick PCC 1:2:4 type B2 (using 40 mm graded stone aggregate) for floor including finishing the surface even and smooth with using extra cement complete all as specified and directed.

M&L Pre-cast cement concrete block masonary with solid blocks, Type C-1 1:3:6 (20mm graded stone aggregate), exc 10 cm in width and setting in cement mortar in CM 1:6, complete all as specified & directed.

M&L Cement concrete in foundations, filling and mass concrete type D-2 1:4:8 using 40mm graded aggregate complete all as specified and directed.

M&L Plain cement concrete 1:3:6, type C2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for Providing pre-cast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) type C1, 1:3:6 ( 20 mm graded aggregate) and setting in mortar 1: 6 , complete all as specified and directed.

M&L for chequered cement concret tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry with white cement & pigments in floors over 20mm thick screed bed of cement mortar 1:6 all as specified & directed.

M&L Preparing new plastered surfaces and applying three coat of white wash on surfaces of walls complete all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in Cement mortar 1:6, finished even and smooth with out using extra cement complete all as specified and directed.

M&L for Rendering 10 mm thick on fair faces of concrete surfaces in cement mortar 1:3 in ceiling of chajja,roof projection,shelve etc and finished even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 15mm thick cement plaster in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

Supply only liquid water proofing compound of approved quality.complete all as specified and directed. (Make : CICCO NO.1/SIKA/ACCO PROOF).

M&L PCC 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in coping and benching and the like including weathering slightly rounded or chamfered angle and throating complete all as specified and directed.

M&L cement concerte in surface channels and drains type C-2 1:3:6 using 20mm graded aggregate complete all as specified and directed.

M&L for 150mm bore Reinforced concretepipes, class NP2, with collars laid in trenches and jointed complete all as specified and directed.

M&L for concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C-2 for 150 mm dia pipe, complete all as specified and directed.

M&L for providing precast cement concrete type B1 1:2:4 (20mm graded stone aggregate) as in landings, chamber/ cover slabs (for man holes etc.) and similar articles with plain faces and set in CM 1:6 where required complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as complete all as specified and directed.

M&L for anti termite treatment treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M&L for anti termite treatment Treating the back fill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with back fill to be measured) complete all as specified and directed.

M&L for anti termite treatment treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.

M&L for anti termite treatment treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc. complete all as specified & directed.

Use and waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchions etc. complete all as specified & directed.

Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs,etc. also splays between floors and beams, etc. complete all as specified & directed.

Use and waste of Formwork to soffits of suspended slabs such as roof slabs, floorslabs, landings,chajjas and similar work; not excee ding 200mm thick(Horizontal or sloping) in chajjas; flat rough finished surfaces of concrete complete all as specified & directed.

Use and waste of Formwork to edges of concrete flats, treads, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide, complete all as specified and directed.

M&L for Reinforced Cement Concrete type A1, 1:1.5:3 (using 20 mm graded stone aggregate) for foundations, footing, plinth beams, bases for columns etc complete all as specified & directed.

M&L for Reinforced cement concrete type A1, 1:1.5:3 ( using 20mm graded aggregate ) as in column, pillars, piers, posts and struts complete all as specified & directed.

M&L for reinforced cement concrete type A1, 1:1.5:3 (using 20 mm graded stone aggregate) in beams, cantilevers, lintels over 1.5 m span complete all as specified & directed.

M&L for Reinforced cement concrete type A1, 1:1.5:3 (using 20 mm graded stone aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified & directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Mild steel TMT but 6mm to 8mm dia, cut to length, bent to shape required including cranking required and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips quality confirming to Fe-410 Gde E-250 for stretched wire complete all as specified and directed.

S&F mild steel tubular trussed, purlins, fencing posts,crane gantries rails and fastenings including special shaped washer etc complete using ERW or induction butt welded tubes Conforming to IS 1161-1979 grade St -240 including distance pieces, cleats , nut & bolt any size & length etc complete all as specified and directed.

S&F rolled mild plates (plain or chequered) channels, square cut or notched, forming holes with riveted, bolted or welded attachment conforming to Fe 290 Gde E-165 complete all as specified and directed.

S&F Mild steel screw bolts diameter of neck 16 to 20(machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n exc 10cm long complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J hooks and bolts complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheeting 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J hooks and bolts complete all as specified and directed.

Supply only 75x75mmx4mm dia chain link MS galvanised fencing or any size or type including line wires any type of standards rails , standing bolts etc including provision of binding wire complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire and taking down old fencing complete all as specified and directed.

S&F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins,(each line wire to be measured) complete all as specified and directed.

M&L Pre-cast cement concrete block masonry with solid blocks type C1, 1:3:6 ( 20 mm graded aggregate) exc. 10 cm in width and setting in mortar 1:6, complete all as specified and directed.

M&L for Providing pre-cast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) type C1, 1:3:6 ( 20 mm graded aggregate) and setting in mortar 1:4 , complete all as specified and directed.

M&L for 25 mm thick Damp Proof Course in cement concrete 1:2:4, Type B-0 to horizontal or vertyical surfaces including necessary formwork complete all as specified and directed.

M&L Moorum /red bajri filling in floors or pavings, laid in layers n exc 15 cm thick, spread, levelled and rammed including watering, complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:4:8 type D2 using 40mm graded aggregate as in sub base complete all as specified and directed.

M&L Non skid ceramic tiles(Coloured) 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm but not exceeding 0.11 sqm, in in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including screed bed 15mm thick in CM 1:6 complete all as specified and directed.

M&L Virified Ceramic tiles light shade double charged 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, in in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including screed bed 15mm thick in CM 1:6 complete all as specified and directed.

M&L Virified Ceramic tiles light shade double charged 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, on vertical surfaces such as skirting, dados and risers to steps etc including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L Coloured Glazed Ceramic tiles 450 x 300 x 7-8 / 600 x 300 x 7-8mm thick on vertical surfaces such as skirting, dados and risers to steps etc including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L Granite slab work 18 to 20mm thick in floors steps, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with granite shade over & including screed bed 15mm thick in CM 1:6 including cutting recess opening for the sink portion and embedding complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, window cills, cooking platform, and other similar situations complete all as specified and directed.

M&L Rendering 10mm thick on brick work or concrete surface in cement mortar 1 : 6 and finished even and smooth without using extra cement complete all as specified and directed.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement. including mixing of water proofing compound wherever required as per manufacturers instructions and complete all as specified and directed. Note: (WPC shall be measured & paid separately).

M&L Rendering 5 mm thick in CM 1:3 in ceiling on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L Preparation of new plaster surface of wall and applying 2coats of distemper oil emulsion white or tinted through mechnical means over a coat of 1mm thick wall care putty,complete all as specified and directed.

M&L Preparation of new plastered surfaces and applying Two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls.

M&L Preparation of new plastered surfaces on walls and applying two coats of oil bound distemper over a coat of alkali resistant primer on surfaces all as specified and directed

M&L Preparation of newly plastered surfaces of walls and applying through mechnical means two coat of Premium Acrylic Smooth exterior emulsion paint over and including priming coat of exterior primer complete complete all as specified and directed.

M&L Preparation of new plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) frame work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions complete all as specified and directed.

S&F Powder coating (minimum thickness of powder coating 50 micron) anodised aluminium door shutters, aluminium section weighing 1.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed.

S&F Powder coating (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, sliding /side hung type without sash bars, aluminium sections weighing not less then 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 No) suitable handle (1 No) complete all as specified and directed. Note : Sheet glass and SS wiremesh shall be measured & paid separately.

M&L for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded

S&F 4.80mm thick plain sheet glass ordinary quality and glazing with EPDM rubber/ neoprene gasket etc complete all as specified an directed.

S&F sheet glass, of 4.80 mm thick ordinary quality, ground or obscured or frosted, on one side etc complete all as specified an directed.

S&F 5.5mm Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified an directed.

S&F 1mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified an directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F Mortice lock, brass 4 Lever vertical type, size 100 mm complete all as specified and directed.

S&F Powder coated fancy type Stainless Steel curtain rod 25mm dia with suitable SS brackets with suitable woodenround base and fency type end top matching to curtain rod of make as approved by GE complete all as specified and directed. Note: Additional supporting bracket shall be provided if length is exceeding 1.2m and rate quoted shall include for the same.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter,with particle board core , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F 100mm mild steel butt hinges, medium weight, cold rolled complete all as specified and directed.

S&F 100 mm long Extruded brass handles, fabricated type polished complete all as specified and directed.

S&F 150 mm alluminium anodised barrel tower bolts of stove enameled black, with bright bolt and fixed complete all as specified and directed.

S&F Toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repairs Corner Glass Shelf, Fancy Type complete all as complete all as specified and as directed.

S&F in repairs PVC body cabinet box mirror of size 350 mm x 450 mm x 100 mm in PTMT alloy of approved patterns and designs fixed in repairs after taking out the old cabinet complete all as specified and as directed.

S&F Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

M&L for 40 mm thick PCC (1:2:4), type B1 using 20 mm graded stone aggregate as in flooring, complete all as specified and directed.

Providing and laying / fixing TPO (Thermoplastic polyolefin) membrane of non-flammable waterproofing of Roof on prepared surface of roof & up to 300 mm of parapets and crumple joint including junction of roof and parapet. which shall be a 1.5mm thick loose laid membrane using Fosroc Proofex ORG (I) membrane or equivalent layers are overlapped to achieve a minimum weld of 110mm. Hot air welding can be either hand applied or by means of automatic machines and the roll’s either end are overlapped with 110mm are in staggered position and the membrane shall be laid over the layers of nonwoven geotextile fiber or Asian Paint TPO or equivalent product of M/S MC Bauchemic /CIPY/SIKA/Pidilite Dr Fixit/M/s Berger TPO membrane. The separation layer provided to prevent the mechanical abrasion and cushioning between the Fosroc Proofex ORG (I) membrane and the concrete substructure. The termination of Fosroc Proofex ORG (I) by aluminum strip anchoring. (Note: The work shall be carried out complete as per manufacture's specifications and application methodology. Execution to be done with authorized trained/skilled applicator with prior experience of more than 5 years in applying similar system.and as per manufacturer technical guidelines laid by manufacturer, Company guarantee to be given by contractor after completion of water proofing work before payment)

S&F Rotational moulded polyethylene water storage tanks of white colour triple layered (ISO certified) (cylindrical vertical with closed top ) hoisted and fixed in position all as specified in Sch “A” of capacity 1000 litre, including 20 mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F Gun-metal, globe or gate valves, heavy duty, with iron wheel head, screwed both ends (ISI marked) of size 50 mm bore complete all as specified and directed.

S&F Gun-metal, globe or gate valves, heavy duty, with iron wheel head, screwed both ends (ISI marked) of size 25 mm bore complete all as specified and directed.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe (ISI marked) of size 20mm bore complete all as specified and directed.

S&F GI steel tubes, medium grade including all fittings, laid in wall/ ceiling/floors including cutting holes or grooves in brick wall/RCC and making good with cement mortar 1:3 complete of sizes 50 mm dia complete all as specified and as directed.

S&F GI steel tubes, medium grade including all fittings, laid in wall/ ceiling/floors including cutting holes or grooves in brick wall/RCC and making good with cement mortar 1:3 complete of sizes 25 mm dia complete all as specified and as directed.

S&F GI steel Tubes, medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors of 20 mm bore pipe line, including cutting holes or grooves in brick wall/RCC and making good with cement mortar 1:3, complete all as specified and directed.

S&F GI steel Tubes, medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors of 15 mm bore concealed pipe line, including cutting holes or grooves in brick wall/RCC and making good with cement mortar 1:3, complete all as specified and directed.

S&F Angle cock 15mm bore fancy type chromium plated screwed down high pressure, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F 15mm fancy type long body bib taps long shank cast copper alloy with crutch or butterfly hadle secrwed for iron piper or for brass ferrule complete all as specified and directed.

S&F 15mm bore single liver basin mixer with out pupup waste with 450 mm long braided hoses complete all as specified & directed.

S&F Brass CP mixer fancy type for mixing hot & cold water chromium plated screwed down high pressure with for iron pipe with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

S&F 15mm bore PVC connection pipe 450mm long with PTMT nuts at both ends complete all as specified and directed.

S&F chromium pated shower rose 125mm size with or without swivel joints, any size including fixing to 15 mm bore steel pipe or union complete all as specified and directed.

S&F towel rail 20mm dia chromium plated including 600mm long including brackets, screws and wooden/plastic cleats complete all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

S&F Vitreous china wash down water closet (Pedestal pattern, ETWC), white including fixing bolts, 110mm PVC (SWR) 'P’ trap, Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets Flush pipe of polyethylene of low or highdensity or PVC 32 mm dia, for low level cistern complete all as specified and directed.

S&F Table top wash hand basin Vitreous china, light colour / white of size 565mmx420mmx140mm including brass chromium plated waste coupling, chain, plug, porcelain rubber stopper, brackets, 32mm bore PVC waste pipe of appropriate length ilcluding making necessary connections complete all as specified and directed.

S&F Sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and waste coupling, ; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110mm bore complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110mm bore complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75mm bore complete all as specified and directed.

S&F PVC (SWR) floor trap 75mm dia outlet, plain/hole with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) bends any radius 110mm bore complete all as specified and directed.

S&F PVC (SWR) bends any radius with access doors 110mm bore complete all as specified and directed.

S&F PVC (SWR) bends any radius 75mm bore complete all as specified and directed.

S&F PVC (SWR) bends any radius with access doors 75mm bore complete all as specified and directed.

S&F PVC (SWR) junction single, (Single T) equal or unequal with access door 110 mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed.

M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement concrete complete

M&L for 75 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) including finishing the surface even and fair complete all as specified and directed.

M&L Point wiring with cable of PVC insulated FRLS copper multistranded conductor 1.5 sqmm 1100 volts grade in and including heavy grade PVC Conduit Pipe ISI marked with all accessories and fixing arrangements on wall/ceiling/floor etc including fixing top cover /PVC junction boxes fixing on wall surface including for housing switches/sockets/regulators etc. with and including 1.5 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly complete all as specified and directed complete all as specified and directed for the following :- Note:- Modular flush board, white cover and relavent items of work measured and paid separately.

One light point controlled by one single pole 5 Amps switch.

One fan/ exhaust/wall fan point controlled by one single pole 5 Amps switch.

One switch socket out let point 5 Amps on independent board.

All as per item No 132.00 here in before but for PVC insulated FRLS copper conductor of size 2.5 sqmm for switch socket multipurpose 15 Amps including provision of 2.5 Sq mm PVC insulated FRLS copper conductor cable as earth continuity conductor on independent board complete all as specified and directed.

S&F PVC ceiling rose 65 x 50 mm surface type with 3 terminals all as complete all as specified and directed.

S&F Modular swich one way 6 Amps, 230 volts complete all as specified and directed.

S&F modular socket, 6 Amps 2/3 pin combined two module, 230 volts complete all as specified and directed.

S&F modular socket, 16 Amps 2/3 pin combined two module, 230 volts complete all as specified and directed.

S&F modular swich one way 16 Amps one module, 230 volts complete all as specified and directed.

S&F modular white cover suitable with frame 3 module complete all as specified and directed.

S&F modular white cover suitable with frame 4 module complete all as specified and directed. .

S&F modular white cover suitable with frame 6 module complete all as specified and directed. .

S&F modular metal flush board 3 module complete all as specified and directed.

S&F modular metal flush board 4 module complete all as specified and directed.

S&F modular metal flush board 6 module complete all as specified and directed.

S&F DB, TPN 4 ways, Double door type complete all as specified and directed.

S&F DB, SPN 8 ways, Double door type complete all as specified and as directed.

S&F MCB SP 6 to 32 Amps 240 volts 10 KA rupturing capacity complete all as specified and directed.

S&F MCB SPN 40 to 63 Amps 240 volts 10 KA rupturing capacity complete all as specified and directed.

S&F MCB TPN 40 Amps 415 volts 10 KA rupturing capacity complete all as specified and directed.

S&F Double pole Sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB of rating 20 Amps complete all as specified and directed.

S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC surface/recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S&F LED Light fitting 2 feet, 10 Watts, 220 volts, AC decorative box type with driver, holder including LED tube light connecting up with 2 core flexible copper conductor cable of suitable size from Ceiling rose complete all as specified and directed.

S&F LED light fitting 9 / 10 Watts bulkhead Lumianiares including LED light driver holder connecting up with 2 core flexible copper conductor cable of suitable size from Ceiling rose complete all as specified and directed.

S&F Wall mounting fan of size 400mm sweep, 100 W power Air delivery 100CMM complete all as specified and directed.

S&F exhaust fans steel body AC single phase 230/ 240 V of size 300mm sweep with blades, and frame and louvers complete all as specified and directed.

S&F RJ 11 telephone sockets (jack type) with shutter, 1 module complete all as specified and directed. Make: Legrand Cat Ref No. 679331or equivalent in GEWISS./ equivalent make - INDOASIAN / L & T

S&F TV/Audio Video/RJ 45 Computer socket, 1 module complete all as specified and directed. Make: Legrand Cat Ref No. 679332 or equivalent in GEWISS/ equivalent make - INDOASIAN / L & T

S&F Sub main wiring with single core PVC insulated cable with copper conductor multistranded 1100 volt grade 2 x 6 sqmm in PVC conduit/ casing caping and including 6 sqmm PVC insulated multistranded copper conductor and connecting to main earth dolly complete all as specified and directed.

S&F Sub main wiring with single core PVC insulated cable with copper conductor multistranded 1100 volt grade 2 x 4sqmm and including 4 sqmm PVC insulated multistranded copper conductor as concealed Non metallic rigid PVC conduit medium grade ISI marked of Appropriate size connecting to main earth dolly complete all as specified and directed

Supply and Installation of hi wall split AC units indoor/outdoor complete with cordless remote control unit and with in built air ionisor and plasma filter for better indoor air quality with minimum 5 star rating EER 3.2 not less than of capacity of 1.5 TR complete all as specified and directed.

S&F Voltage stabilizer for automatic operation, single phase naturally air cooled wall mounted, copper wound with digital display indoor type for AC & designed for input variation between 140 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 3 % and of capacity 3 KVA complete all as specified and directed. Make: Volina/Bluebird/Microtek

S&F Single pole and Neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB complete all as specified and directed.

S&F Electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc complete all as specified and directed

Supply and laying precast concrete cable cover protection of UG cables of size 230 x 113 x 75 mm laid in trenches complete all as specified and directed.

Supply and laying cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 sqmm 4 core complete all as specified and directed.

Supply and laying cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 sqmm 3.5 core complete all as specified and directed.

Supply, Installing, testing and commissioning of factory made and tested LT feeder pillar box (KIOSK) (incl CPRI type test certified) out door type, platform mounted, suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, having bus bar chamber with insulated aluminium bus bar 150 Amps rating installed on porcelain insulators. The panel shall be dust and vermin proof. IP 65 class protection and made of 3.15mm CRCA MS sheet and 40 x 40 x 6 mm thick angle iron frame work, powder coated finish over one coat of red oxide primer out side and two coats of red oxide primer inside, front opening type with aprons for cable entry with double door shutter and locking arrangement (including provn of 65mm Godrej Freedom) lock with 2 keys, internal wiring with PVC insulated solid copper conductor FRLS cable IS 694 marked of adequate size but not less than 4 Sqmm complete all as specified and directed . The scope of work includes the following:-

M&L Earthing complete with galvanised steel earth plate electrode 60cm×60cm×6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to 32x6 GI strip as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion and specified in EP No 3 of SSR part I 2009 complete all as specified and directed.

M&L Construction of brick / stone masonary valve pit / chamber of size 900 x 900 x 900mm, including necessary excavation and earth work, PCC, plaster in CM 1:6 on inside and outside (above ground), MS angle iron 50 x 50 x 6mm thick frame work, with PCC cover & hold fasts,complete all as specified and directed.

M&L for extension of existing CI/DI pipe of any dia bore/size in position for insertion of 01 No of CI/DI TEE of required size and bore connecting pieces/flanged/socketed/spigoted of suitable bore and making run lead/flanged joint complete all as specified and directed.

S&F Air termination, single pointed aluminium rod 12mm dia and 300mm long with fixinf purpose of Air termination rod complete all as specified and directed.

S&F Aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground for fitting the strip on top of parapet wall/water tank/machine room/ mumty roof and on wall complete all as specified and directed.

S&F Galvanised iron strip 32 x 6mm buried in ground complete all as specified and directed.

S&F Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex head screw complete all as specified and directed.

raashi constructions (BID ID -3087423)

chowdeshwariconstructionco (BID ID -3092116)

EURO ENTERPRISES (BID ID -3087788)