Annual Maintenance of Electrical Civil and Plumbing work

Amount

Supply and replacing of Angle Holder of "Anchor" or equivalent make of approved quality including all materials, labour and T&P etc.

Supply and replacing of 6 Amp piano tyre switch of "Anchor" or equivalent make of approved quality including all material, labour and T&P etc.

Supply and replacing of 6 Amp piano tyre socket of "Anchor" or equivalent make of approved quality including all material, labour and T&P etc.

Supply and replacing of 16 Amp piano type switch of "Anchor" or equivalent make of approved quality including all material, labour and T&P etc.

Supply and replacing of 16 Amp piano type socket of "Anchor" or equivalent make of approved quality including all material, labour and T&P etc.

Supply and laying 1.5 Sq. mm gauge copper wire of "Plaza" or equivalent make of approved quality including connecting with existing wiring in existing P.V.C pipe including all materials, labour and T&P complete.

Supply and laying 2.5 Sq. mm gauge copper wire of "Plaza" or equivalent make of approved quality including connecting with existing wiring in existing P.V.C pipe including all materials, labour and T&P complete.

Supply and laying 4.0 Sq. mm gauge copper wire of "Plaza" or equivalent make of approved quality including connecting with existing wiring in existing P.V.C pipe including all materials, labour and T&P complete.

Rewinding of burnt ceiling fan/wall fan/Exhaust fan with approved copper wire including cost of all materials labour and T&P etc. complete (Burnt wire will not be taken back)

Supply and replacing of burnt and damaged condenser of ceiling fan/Exhaust fan of approved quality including all materials, labours and T&P etc.

Extraction of defective VT submersible pumps and motor with 60” X 90” column pipe then lowering of the repaired pump and motor with pipe and testing the same including checking main cut out fuse and operation of Tubewell for 24 hours to rits smooth working with all cost of materials, labour and T&P etc required for the proper completion of the work.

Greasing of ceiling fan after cleaning the bearing and shaft with oil/petrol and its testing .

Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light on surface complete in all respect.

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 30Watt. to 40 Watt. Confirming to IP 66 protection complete in all respect.

Supply and fixing of recess/ Surface/ Pendent mounting round 10 to 15 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect.

S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve.

S&F of 100 Amp. 4 Pole Isolator.

Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect.

Supply and fixing of call bell of approved make on polished MDFEG/ Teak ply board including making connections etc. complete in all respect.

Supply and Fixing of 3 blade Exhaust fan metal body 150 mm of Crompton, Havells or equivalent make for bathroom or kitchen use including all material, T&P etc required for proper completion of work as approved by engineer in charge.

Supply and fixing of electronic fan regulator 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work.

Supply and fixing of switch box 100 x 100 x 50 mm size of approved make made up of 1.0 mm thick ISI Marked G.P.sheet All 4 corners folded & spot welded for screw and holes plugged with PVC Nylon Caps . Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box all materials, labour and T&P required for proper completion of work as directed at site by the Engineer in charge.

Suppy & fixing of 16 Amp, 240 volt 3 Pin Plug top.

Suppy & fixing of 2 pole 20 Amp 240 volt matel clad plag top for AC .

servicing & Repairing of water geyser with material.

Repairing of room heater blower

Supply and Fixing 400 Amp TPN Sandwich alumininum bus bar trunking complete shutable for IP 54 protection with top end cover plate of 1.6mm thik G.I. Sheet with sutaible arrangement for fixing etc complete in all respect.

Dismantling existing plaster including disposal of refuse as directed by the Engineer-I/C within a distance of 60 M.

Scrapping old white or colour wash or distemper including disposal of refuse as directed by the Engineer-I/C within a distance of 60 M.

12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand(1:6),minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work.

Providing and laying floor of 8 mm thick vitrified tiles in flooring or skirting of approved brand (Bell, Johnson or equi. make) size of 600x600 mm of approved shade, colour and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cement mixed with pigment to match the shade of tile including cost of all material, labour and T&P required for proper completion of the work.

Cleaning of septic tank including disposal of waste out side the UPPCL area as per direction of the Engineer-in-charge including cost of all labour,T&P etc.required for proper completion of the work.

Cleaning and opening of chocked W.C./ bath / kithchen pipe line including opening and refixing of chamber cover including washing etc. complete.(Analysis based on NBO - 11 25.020.

Applying two coat Tapcrete mixed with White Cement and water to proper consistany on leaky surface including supply of all materials, labour etc. required for proper completion of work.

Applying Birla or equivalent putty on new interior or exterior surface over one coat of water based cement primer of ICI or equivalent brand for smoothening and levelling of the surface as per requirement and direction of Engineer I/C including cost of all material, labour, T & P etc required for proper completion of work.

Applying BIRLA PUTTY or equivalent putty on previousaly bila putty smoothen surface over one cost of water base cement primer of ICI or equivalent brand for smoothining and leveling of the surface as per requirement and direction of E/I including cost of all material , labour and T&P required for proper completion of work.

One priming coat and one coat oil bound distemper on new work including supply of all materials,labour and T&P etc. required for proper completion of the work.

As in item 10 but for every coat after the first coat.

One coat on previously old oil bound distemper surface.

Providing and fixing flat back 465 mm.x 355 mm x 265 mm. size lipped front urinal basin of white glazed earthern ware first quality (Hindutan, Neycer make) I.S.I. marked including supply of all materials,labour and T&P etc. required for proper completion of the work.

Painting one coat with APEX or equivalent brand weather coat paint on new wall surfaces (well prepared with Birla putty and one coat of primer ICI or equivalent which shall be paid separately) including through washing with water including cost of all materials, labour, T&P required for proper completion of work.

Same as in item no 14 above but for every coat of additional APEX or equivalent brand weather coat paint .

Painting one coat of APEX or equivalent brand weather coat paint .on previously treated surface.

Supply and fixing of 32 mm thick single leaf flush door shutter ( boiled water resistance, phenol maldehide resin bonded, hot pressed factory made) commercial quality to I.S.2202 part-1 (1983) ISI marked including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges,bolts.locks,handles, springs and other fittings but excluding their supply including all materials, labour & T&P etc. required for proper completion of work.

Painting or varnishing new iron work in small areas or new wood work with one coat of ready mixed priming paint and one coat of approved superior quality ready mix paint "Luxol" or equivalent brand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950.

As in item 17 above but for every coat after first coat.

As in item 17 above but for every coat on previously painted old wood or iron work including its sand papering,rubbing and cleaning as required, for proper completion of work.

Providing and fixing PLASTIC SEAT COVER COMPLETE WITH PLASTIC LID FOR EUROPEAN TYPE WC ISI MARKED including supply of all materials,labour and T&P etc.complete.

Providing and fixing in position 32 mm. dia P.V.C. flush pipe. for W.C. with unions, bends etc. including supply of all materials,labour and T&P etc.required for proper completion of the work.

Providing and fixing in position 32 mm. dia P.V.C. WASTE PIPE FOR WASH BASIN. including supply of all materials,labour and T&P etc.required for proper completion of the work.

Providing and fixing 600 mm x 450 mm beveled edge mirror of Atul,Kiran makeglass with Indian polish 6.50 mm thick complete with back of 600 mm x 450 mm x 6 mm hard board sheet fixed to wooden cieats with C.P. brass screws and washers including supply of all materials, labour and T&P etc.required for proper completion of the work.

Supply and fixing of Aluminium Door Stoper. Aluminium Door Stoppers or Cleats (Rubber & Long Screw) 18(i)

Renewing panes of 4.8 to 5.7 mm glass including supply of glass with putty and brads including supply of all materials, labour and t&P etc. required for proper completion of the work.(a) glass of 5 mm thick.

Job attending by one no. Plumber/welder/mason/carpenter with one no. helper per hour or part of an hour.

Supply and fixing of False celling. 12 mm thlck soft mineral tiles of size 595x595mm (Arm strong Made)(22-2)

Neoprene gasket for Aluminium frame doors/ windows/ fixed glazing. 18(k)

Repairing Wooden Chair/Table as requirement with required material.(NSI)

Repairing Single bed through carpanter mistri .

First class brick work in 1:6 cement and coarse sand mortar in super structure of one brick thick including supply of all materials, labour & T&P etc. required for proper completion of work.

Providing and fixing CP BRASS BIB COCK15 mm dia. HEAVY QUALITY ( 400gm) ( L & K and equi.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.

CP BRASS wall mixer HEAVY QUALITY( L & K and equi.)

CP BRASS BIB COCK15 mm dia. HEAVY QUALITY ( 200gm) ( L & K and equi.)

CP BRASS Piller cock HEAVY QUALITY ( L&K or equi.)

CP BRASS SHOWER HEAVY QUALITY ( > 225 gms )

Providing and fixing full way 15mm dia G.M. gate valve with wheel, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.

Providing and fixing full way 65mm dia G.M. gate valve with wheel, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.

Providing and fixing of 110 mm dia PVC pipe 4 Kg/ Sq.cm for with special such as Tee, bend, socket, elbow etc including supply of all labour,material,T & P etc complete required for proper completion of work.

Providing and fixing 15 mm dia ISI Approved CPVC pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete.

Providing and fixing first quality white glazed "Orissa" pattern W.C.Pan Hindustan, Cera make. size 580 mm.(Hindustan,Cera Make) with out "P" trap including supply of all materials,labour and T&P etc.complete.

Providing and fixing 10 litres low level PVC flushing cistern, COMPLETE WITH ALL FITTINGS including supply of all materials, labour and T&P etc. required for proper completion of the work.

Providing and fixing 550X400 mm wash hand basin of white glazed earthern ware first quality I.S.I. marked (Hindustan,Neycer / Cera make) including supply of all materials, labour and T&P etc. required for proper completion of the work .

Providing and fixing first quality white glazed of European type Hindustan, Cera make with out "P" trap including supply of all materials,labour and T&P etc.complete.

Supply and planting seasonal flower plants such as Genda, Rose, Ostar, Flox, Guldawadi,Gulmehndi, Cochia etc. including digging hole of proper size, manure and treatment with proper chemical etc., including cost of fertilizer, manure, all materials, labour and T&P etc complete in allrespects.

Supply and fixing brass polished hydraulic door closure of approved make & quality its fixing and adjustment with the help of screws, nuts and bolts including supply of all labour, T & P etc. required for proper completion of the work.

Supplying & fixing 24 gauge annodized aluminium sheet of approved quality including cutting, wastage and fixing the same over the wooden door shutters with nails with all material, labour and T&P.

Repairing of mixture Tooti for hostels Bathroom.

Supply and fixing of Syntex or equivalent make water storage tank including all materials, labours, T&P etc required for proper completion of work.

Providing & fixing half turn 15mm dia gate valve, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.

Supply and replacing of L drop 16mm diaX300 mm long chromium polished iron fittings including cost of nuts, bolts etc.complete.

Tower bolts 10 mm dia x 250 mm long.

M.S.handles 100 mm size.

Providing and fixing PVC CONNECTION PIPE, 300X15 with 2 brass units ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.

RS VERMA ENTERPRISES (BID ID -4789009)

Soldier HR Services OPC Private Limited (BID ID -4788949)

metro construction/suppliers (BID ID -4790488)

M/S SHIVA TRADERS (BID ID -4790387)