Providing of Essential and dedicated 11 kV feeder for STP at Rakh Colony and outfall Station emanating from Receiving Station Waganpora falling under the jurisdiction of ESD Nawakadal, ED 3rd (Turnkey Basis).

Providing of Essential and dedicated 11 kV feeder for STP at Rakh Colony and outfall Station emanating from Receiving Station Waganpora falling under the jurisdiction of ESD Nawakadal, ED 3rd (Turnkey Basis).

Supply, Installation, testing and commissioning of S.T. poles 9.0 Meter long swaged Type conforming to ST 410 SP-33, IS: 2713 amended up-to date well finished and coated with black bituminous paint upto plant depth and Red-Oxide coated above ground level with earthing arrangement through bolt welded on pole of 14 mm diameter, provided at height of 300mm above the planting depth which should be 1.5 mtr (SP 33). Top plate 3mm thick fully welded & bottom plate 35cm*35cm, 5mm thick fully welded.

Supply, installation, testing and commissioning of 11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Supply, installation, testing and commissioning of 11KV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Supply, fabrication & installation of GI Channel/Angle/Flat of sizes including Back clamps/Collars

Supply, laying, installation, testing and commissioning of 50 mm² ACSR

Supply, laying, installation, testing and commissioning of 120 mm² AB Cable (3x120+1x95 insulated) mm² XLPE (11 kV, 3C + Earth)

Supply, installation, testing and commissioning of Heat Shrinkable Outdoor Cable Termination Kit

Supply & Fixing of Suspension/Tension Clamp with eye hook including pole collar/back clamps

Supply & Fixing of PG Clamps for 50 mm² ACSR Conductor

Supply and fixing of Galvanized Nuts and Bolts full thread of sizes as per IS

Supply and fixing of Danger Plate With Clamps as per Standards wih writing in English & Urdu.

Supply and fixing of Anti-Climbing Device with Clamps

providing & laying of Pole Earthing Complete by GI Pipe 40 mm 3mtr long through GI Strip 25x3 mm

Providing and painting of poles with single coat of red oxide an two coats of Aluminum Paint

Supply, installation, testing and commissioning of 11 kV Isolator, Double Break,3-pole, 630 Amp, horizontal mounting Type, with Earth Switch. (Complete with accessories).

Supply and Fixing of Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 )mm, nut-bolts, 2 Nos turnbuckles, 1.8m long, 16 mm diameter solid GS stay rod

Providing of material and laying of Cement bottoming of poles (1:2:4 Mix as per REC Standards 0.48 M3 per Pole)