REPAIR/MAINT OF PUMP MOTOR SUCTION/DELIVERY LINE AND WATER TREATMENT AT YPH UNDER AGE E/M-I AT GE (C) KIRKEE

Amount

Excavation post holes (or similar holes) each n exc. 0.5 Cum, getting out Soft/ loose soil, Returning, filling in and ramming earth or broken rubble mixed with earth around, in layersn.exc. 25 cm, watering and removing surplus soil to a distance not exc 50m and making good surface.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out Soft/Loose soil all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm hard/dense soil all as specified.

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point

M & L for taking up cast iron water mains (incl all fitting) 80mm bore dia of pipe with spigot and socket ends from trenches complete all as psecified and directed.

-ditto- all as per item No 5 above but of pipe 100 mm bore

-ditto- all as per item No 5 above but of pipe 150 mm bore

-ditto- all as per item No 5 above but of pipe 200 mm bore

-ditto- all as per item No 5 above but of pipe 250 mm bore

-ditto- all as per item No 5 above but of pipe 300 mm bore

M & L for Cutting cast iron pipes in position for insertion of fittings, mechanical joints, replacement of pipes etc for bore of pipe 80mm

-ditto- all as per item No 11 above but of 100 bore pipes

-ditto- all as per item No 11 above but of 150 bore pipes

-ditto- all as per item No 11 above but of 200 bore pipes

-ditto- all as per item No 11 above but of 250 bore pipes

-ditto- all as per item No 11 above but of 300 bore pipes

M & L for Ductile iron fittings such as bends (any type, radius and angle), tapers any type (straight, bend, incresing, decreasing or double socket etc.), Tee piece, single branch 'Y'junction double branch, collar etc., caps and plugs etc. as per IS: 9523-2000 of class K-7, with internal cement mortor lining, and external zinc and black bitumen coated any type of dia pipe complete all as specified and directed by Engr-inCharge

Supply, laying, jointing & testing DI-K7 class with spigot and socket, suitable for Push on rubber joint, with internal cement mortor lining, and external zinc and black bitumen coated pipes in any lengths conforming to IS:8329-2000 including Rubber Gasket & joints as per IS:9523-2000 laid in trenches/ Road/ Ducts/ Footpath/ on wall/ on floor locations for 100 mm bore dia pipe complete all as specified and directed. Make: Electro steel/Jindal Saw

-ditto- all as per item No 18 above but 150 mm bore pipes.

-ditto- all as per item No 18 above but 200 mm bore pipes.

-ditto- all as per item No 18 above but of 250 mm bore pipes.

-ditto- all as per item No 18 above but of 300 mm bore pipes.

S&F in replacement gun metal gate valve ISI mark of sizes of 15mm dia

S&F in replacement gun metal gate valve ISI mark of size 20mm dia

S&F in replacement gun metal gate valve ISI mark of size 25 mm dia

S&F in replacement gun metal gate valve ISI mark of size 40 mm dia

S&F in replacement gun metal gate valve ISI mark of size 50mm dia

S&F in replacement steel water tubing galvanized medium grade including new GI fitting of medium grade such as elbow, socket,tee, reducer, union, etc laid in trenches/fixed to walls/floors, ceiling all as specified for 15mm dia

S&F in replacement steel water tubing galvanized medium grade including new GI fitting of medium grade such as elbow, socket,tee, reducer, union, etc laid in trenches/fixed to walls/floors, ceiling all as specified for 20mm dia

S&F in replacement steel water tubing galvanized medium grade including new GI fitting of medium grade such as elbow, socket,tee, reducer, union, etc laid in trenches/fixed to walls/floors, ceiling all as specified for 25 mm dia

S&F in replacement steel water tubing galvanized medium grade including new GI fitting of medium grade such as elbow, socket,tee, reducer, union, etc laid in trenches/fixed to walls/floors, ceiling all as specified for 40 mm dia

S&F in replacement steel water tubing galvanized medium grade including new GI fitting of medium grade such as elbow, socket,tee, reducer, union, etc laid in trenches/fixed to walls/floors, ceiling all as specified for 50mm dia

M&L for dismantling/disconnecting all electric supply connections of pump set DSM-5B model of capacity 100 HP carefully for rewinding complete with copper wire of existing gauge, varnashing, heating and reassembling/fixing fixing to original position after repair/overhauling with nuts, bolts, washers, pipe connection and cable connection complete including testing, commissioning, proper alignment all as specified and directed by Engr-in-Charge.

M&L for dismantling/disconnecting all electric supply connections of pump set DSM-5B model of capacity 100 HP (Make : Kirloskar ) carefully and taking out old pump shaft alongwith impeller, bearing, bearing cartridge,(both sides), gasket, gland packing, shaft sleeve, shaft bush check nut of both ends and shifted to workshop for repair/replacement of damaged parts and re-filling by doing welding cutting, grinding, buffing and transporting back to site, re-installation and levelling, testing and commissioning complete all as directed by Engr-in-Charge.

Supply only following spares :-

Bearing No.3309 ATN

Bearing No.21309 ATN

Gland packing weighing 2 Kg

Bearing cartridge both ends

Rubber gasket 6mm thick 200mm dia.

High tensile steel shaft accurately machined and graounded by antifrication bearings suitable for 100 HP motor and pump.

Grease.

Gasket asbestoes sheet 3mm thick

Shaft sleeve.

Shaft bush 63 mm dia 75 mm

'o' rings of shaft sleeve set of 3.

'I' bolt with nut and washer for gland.

Inter stagee of size 57 mm dia 67 mm long 6mm .

Nut bolt washer of size 20mm x 75 mm.

Nut bolt washer of size 25mm x 50 mm.

Check nuts of size 60mmx 20mm.

Supply and fix in replacement coupling type C-276 with key suitable for 100 HP Pump and motor as per sample complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement spider C-276 suitable for 100 HP pump and motor complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement indicator lamp RYB suitable for pannel board set of 3 complete all as specified and directed by Engr-in-Charge.

M & L in repair for cross arms MC channels, bracings supports clamps and chequred plate fabricated from structural steel sections including nuts, bolts, washers, welding bending cold or hot, drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of aluminium paints complete all as specified and directed by Engr-in-Charge.

M&L for dismantling and taking out Induction motor upto 20 HP from foundation by removing electric connection, coupling carefully and carrying to wksp & back for repair /rewinding complete with copper wire of existing gauge, varnashing, heating and reassembling/fixing fixing to original position after repair/overhauling with nuts, bolts, washers, pipe connection and cable connection complete including testing, commissioning, proper alignment complete all as specified and directed by Engr-in-Charge.

M&L for painting of motor and pump of capacity upto100 HP (Make : Kirloskar) including allied accessaries such as bend, elbow, inlet and outlet pipes of any dia up to 2 mtrs by removing the existing deteriorated paint by scrapping the complete body, filling the cavaties and painting with two coats of synthetic enamelled paint of grade 'A' and marking SM/MES No. (required size and shape) with black paint complete all as specified and directed by Engr-in-Charge..

M&L for dismantling/disconnecting all electrical and pipe connections from pump and motor from existing foundation by using chain pulley block with triple arrangement and demolished old PCC foundation of size 2600mm long, 1050mm width and 150mm height for making new foundation of pump and motor complete all as specified and directed by Engr-in-charge.

M&L for cement conrete 1:2:4 type B2 (using 40mm graded curshed stone aggegrate) for PCC foundation of size 2600 mm long, 1050 mm width and 150 mm height including MS plate of size 15mm thick, 250 mm width and 2100 mm long for fixing pump and motor complete all as specified and directed by Engr-in-charge.

Supply and fix in replacement antivibrator of size 200mm x100mm heavy duty heigh density (AV-20 Nos) complete all as specified and directed by Engr- in- Charge.

M&L for Re-fixing/reconnecting of pump set and motor with all pipes inlet and out let with new nut bolt used high tensile quality as required and reconnecting all electrical connections and cleaning,greasing and testing complete all as specified and directed by Engr- in- Charge.

M&L for dismantiling/disconnecting old unserviceable MS pipe of size varying from 250mm to 450mm of any length by gas cutter and necessary T&P required at site complete all as specified and directed by Engr-in-Charge.

M&L for MS pipe of size upto 450mm of any length fixed in position of same size both ends flanged by welding grinding and buffing etc complete with all accessories such as nut bolts washers and 02 nos rubber gasket fixed in position complete all as specified and directed by Engr-in-Charge.

M & L in repair for MS fittings such as bends (any type, radius and angle), tapers any type (straight, bend, incresing, decreasing or double socket etc.), Tee piece, single branch 'Y' junction double branch, collar etc., caps and plugs etc. upto 450 mm complete all as specified and directed

Supply and fix in replacement CI foot valve of size 200mm dia including nut, bolts, washer and rubber gasket complete all as specified and directed by Engr-in-Charge

Supply and fix in replacement CI foot valve of size 150mm dia including nut, bolts, washer and rubber gasket complete all as specified and directed by Engr-in-Charge

Supply and fix in replacement MCCB 250 Amps type DTH -250 having breaking capacity 36 KA 415V 3 pole complete all as directed by Engr-in-Charge.

Supply and fix in replacement MCCB 200 Amps type DTH -200 having breaking capacity 36 KA 415V 3 pole complete all as directed by Engr-in-Charge.

Supply and fix in replacement MCCB 100 Amps type DTH -100 having breaking capacity 16 KA 415V 3 pole complete all as directed by Engr-in-Charge. Make L&T or its equivalent.

Supply and fix in replacement contractors 3 Nos MNX-110 for fully automatic star-delta starter in sheet steel enclosure type MN-110, FASD with SSP feature motor rating AC-3 duty, 415v, 50 hz, 3 phase including replacing of 50sqmm stranded copper conductor 2 mtr long and copper lugs complete all as specified and directed by Engr-In-Charge.

Supply and fix in replacement 3 pole power contractor type ML-10, 200Amp, 415V, 50 Hz suitable for 100 HP motor out put 3 Phase and making all the connections complete all as specified and directed by Engr-in-Charge.

M&L for construction of block masonry valve pit chambers of size up to 1.2m x1.2mx1m including necessary excavation in any type of soil PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in bedding foundation/coping, PCC block masonry, 15 mm thick plaster in CM 1:4 on both side of wall pit with and including MS fabricated cover with angle iron frame 32mmx32mmx4mm and CRCA sheet of 3mm thick with locking arrangement and applying two coats of synthetic enamelled paint over a coat of red oxide primer on both sides of the cover complete all as specified, and directed by Engr-in-Charge.

M&L for PCC 1:4:8 type D2 (Using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair Hot Dipped Galvanized Chain Link Fencing with Zinc Coating, nominal height-2400mm, Pitch-50mm and wire dia 3.15 mm. (approx weight-2.55 Kg /Sqm) complete all as specified and directed by Engr-in-charge.

M&L in repair for mild steel work of angle fixed independently for fencing post and others confirming to Gde Fe 410-A incl cutting to dead end length where required, notching, drilling, fitting and/or welding or connecting with bolts and nuts incl dismentling taking down unsv one complete all as specified and directed.

M&L for following chemicals for water treatment :-

Calcium hypochlorite (65% to 70% chlorine content) calcium based granular disinfectant in 45 Kg Drum

Alum ferric Gde -I

Alum Crystal Gde-I

Hydrated Lime suitable for drinking water

Calcium di-oxide

M&L for Fabrication ,supply, Installation sign boards (size 2.00 mtr X0.80X0.50 mtr approx) with angle iron frame duly welded of size30X30X3.00 mm thick fixed with 5mm thick PVC Board of blue colour duly pasted letter/numbers on it with pre wired with LED Lighting,including making connection with weather proof 4.00 sq mm 2 core aluminum conductor from switch board upto 10 mtr including taking out u/s sign boards of any type complete all as specified and directed by Engr-in-Charge.

M&L Cement concrete type B-2,1:2;4 ( 40 mm graded stone aggregate ) in sub base 75 mm thick complete.

S&F 80 mm thick machine pressed precast concrete rubber moulded coloured interlocking paver block with coloured cement and pigment any shape and size confirming to IS-15658-2006 M-40 grade laid over 50 mm thick sand cushionining including removing broken PCC floor completed all as specified and directed by Engr-in-Charge.

S&F in replacement Extended type valve operating handle made from 25mm dia heavy grade pipe including replacement of defective parts such as wheel,bearings,supports,base etc complete set to work of size 100 mm to 200 mm sluice valves completed all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of sluice valve 200 mm class PN 1.6 including all necessary accessories such as nut, bolts, washers and gaskets complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of sluice valve 150 mm class PN 1.6 including all necessary accessories such as nut, bolts, washers and gaskets complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of sluice valve 100 mm class PN 1.6 including all necessary accessories such as nut, bolts, washers and gaskets complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement LED building security light 30 watts complete including mounting bracket of 25/40 mm GI Pipe Medium grade and making connection with 2.5 sqmm 3 core flexible copper conductor complete all as specified and directed by Engr-in-Charge.

M&L for distempering walls with one coat distemper dry, white or tinted complete all as specified and directed by Engr-in-Charge

M&L for distempering walls with one coat cement base paint, white or tinted complete all as specified and directed by Engr-in-Charge

Takshashila electricals

SKS Electricals

Star Electrical

K.K.Enterprises