Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical Technically acceptable |
| 2 | Accepted-Technical | Accepted-Technical Technically acceptable |
| 3 | Accepted-Technical | Accepted-Technical Technically acceptable |
Tender Value
₹48.5 L
EMD Value
₹97,000
Closing Date
26 Jun 2026, 4:00 pmClosed
CHIEF GENERAL MANAGER,ENGINE FACTORY AVADI
ENGINE FACTORY AVADI,CHENNAI 600054
Repair to the Storm Water Drain around Bar Material Godown at Scrap Yard inside EFA
2026_AVNL_280452_1
EFA/EO(C)/1281/E/TE/05/2026-27
Open Tender
Civil Works
Item Rate
180 days
ENGINE FACTORY AVADI, CHENNAI
ELIGIBILITY CRITERIA ATTACHED
8 documents required · 8 mandatory
₹0
₹97,000
7 Jul 2026
10 Jun 2026
29 Jun 2026
10 Jun 2026
26 Jun 2026
11 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Demolition of Cement Concrete (reinforced) of any description and in any position not otherwise specificically provided for, and remove them. | 60 | SQM | - | - |
| 2 | M/L Excavation in trenches, n. exc. 1.5m wide and n.exc. 1.5m in depth for foundation etc. And getting out including dressing/ trimming sides and levelling/grading and ramming of bottoms of excavation in dence soil. | 414 | SQM | - | - |
| 3 | M/L for filling of good quality loose earth / sand filling and leveling of earth in layers including watering and consolidation. | 46 | SQ.M. | - | - |
| 4 | M/L for P.C.C. 1:3:6 Type C2 using 40 mm graded stone aggregate Cement concrete
in foundations, filling and mass concrete. | 46 | CU.M | - | - |
| 5 | M/L for Reinforced cement concrete (design mix)in: Walls, retaining walls,basement walls, ballastwalls and the like;anythickness; above top offootings; including attached pilasters and buttresses. M-20 (20mm graded aggregates) | 150 | CU.M | 1 | ₹149.99 |
| 6 | M & L for mild steel TMT bars of 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia. or securing with clips; Complete all as specified and as directed by the Engineer-in-Charge. | 7,646 | CU.M | 1 | ₹7,645.24 |
| 7 | M & L for mild steel TMT bars of 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia. or securing with clips; Complete all as specified and as directed by the Engineer-in-Charge. | 9,660 | CU.M. | - | - |
| 8 | M & L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to
batter(316.72+80.39) flat surface | 1,500 | RM | 0.6 | ₹899.85 |
| 9 | Rendering 15mm thick cement plaster, using cement morter (1:4) on wall/ceiling / concrete surfaces and finish the surface even and smooth without using extra cement including coat. | 645 | SQ.M, | 0.2 | ₹129 |
| 10 | S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls Bore im mm 75mm | 288 | SQ.M. | 0.2 | ₹57.57 |
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 1.12 MB
TendernoticeSafetyClause.pdf
Tender Documents • 0.20 MB
SPECIALCONDITIONSOFCONTRACT_R.pdf
Tender Documents • 0.31 MB
GENERALCONDITIONSOFCONTRACT.pdf
Tender Documents • 0.13 MB
Particilar.pdf
Tender Documents • 0.14 MB
InstructionstoBidders.pdf
Tender Documents • 0.19 MB
Eligibility.pdf
Tender Documents • 0.32 MB
BOQ_327284.xls
BOQ • 0.32 MB
BOQAmended.pdf
PDF • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .