Construction of 100 KVA LT substation Near Florence Nightingale Priti Nagar and Bramhdev transformer and 250 KVA LT substation Near Nanda farm, Sitapur road and transformer 63 KVA to 100 KVA near Keshav Nagar near Ram Leela maidan Faizullaganj

Amount

Safe Loading, carriage & unloading of following material from Central store and JE store to work site.

ST Pole 11 Mtr long

PCC pole 8.5 mtr. Long.

11/0.4KV 250 KVA T/F

11/0.4KV 100 KVA T/F

11/0.4KV 400 KVA T/F

AB Conductor (3x120+ 1x95+ 1x16) sqmm

AB Conductor (3x95+1x70+1x16) sqmm

AB Conductor (3x50+1x35+1x16) sqmm

LT Cable 1x240/400/630 sqmm

ACSR Weasel Conductor.

Fabrication erection of substation type double pole on ST pole 11Mtr along with fixing of necessary clamp, accessories required of MS channel on top dropper with arrangement of fixing of 3 Nos pin insulator as per RESPO specification & direction of E/I.

Errection of 11 mtr. ST pole by digging pit binding of ACSR weael conductor fixing of necessary clamps alongwith grouting & Plinthing of pole. All material shall be supplied by the contractor and ST pole provided by the department.

Errection of 8.5 Mtr. PCC pole by digging pit binding of Aerial Bunched Conductor fixing of necessary clamps alongwith grouting & Plinthing of pole. All material shall be supplied by the contractor and ST pole provided by the department.

Laying Stringing & Sagging of 3 phase 4 wire 11 KV line by ACSR weasel conductor with the help of necessary Clamp & Insulator as per RESPO Specification and direction on E/I. ACSR weasel conductor shall be supplied by the Department.

Laying of LT Cable 1x400/630 sqmmsqmm with suitable size of Al lug. All material provided by department. Except Alu. Lugs

Construction of Metalic type Distribution Pillar box with first class brick ballast cement, coarse sand, local sand, brick ballast and MS Round bar of 10 mm dia including supply and mounting of 04 nos. Straight MS Angle 50x50x6x750 mm-3 nos., Henely type tailless fuse units 500 Amps. 650 Volts one no. for incoming and other for outgoing, Copper bus bar 4 nos. 1000x50x6 mm with locking arrangement made of 18 SWG BP Sheet (All the material will be arranged by the contractor)

Construction of T/F plinth of size 2x2x1.2 mtr. With Ist class bricks and masonary work in the ratio 1:4 cement & sand coarse ,filling the structure completely as per norms with RCC top 1:2:2 cement sand coarse stone grit with ms bar and MS channel for resting T/F all material shall be supplied by Contractor.

Rectangular wiremess pel fencing of 11/0.4 KV S/S shall be made as per site requirement not exceeding 3 meter height fabrication with 45x45x5 mm angle the frame should also have 1 no. Horizontal runner of MS flat 40x5 welded in middle to support the wiremesh. Rectangular welded type wire mess of size 50x25mm made of 12 S.W.G. wiremesh shall be welded all along the periphery of the frame as well as on horizontal runner to give extra strength of welding to wiremesh welded on the frame. Diagonal bracing of all the frame panel will be welded with Ms flat of size 25x3mm to support as per RESPO specification & direction of E/I. The vertical angles shall be grouted 1/6 of its length in ground with 1:2:2 ratio of cement, coarse sand & concrete provision of gate for entry should be provided with pad lock.

Pipe type earthing with 20 mtr deep borring and providing Jindal make GI pipe "B" Class 1” dia (20 mtr GI pipe) and GI strip 25x5 mmx6 meter long attached with clamps, L piece, nut & bolts and GI pipe cap. All material shall be supplied by the contractor.

Erection of AB Conductor 3x50+1x35+1x16 or 3x95+1x70+1x16 or 3x120+1x95+1x16 sqmm on existing/ newly erected pole.Only ABC shall be supplied by the department.

Supply and fixing of clamps.

(a) Dead end clamps

(b) Suspension clamps

(c) Eye hook for dead end clamp

(d) LT Clamp for AB conductor

(e) Shackle insulator

(f) LT Pearsing connector

Grouting & nuzzling of stay set complete including supply and fixing of necessary clamps, complete Stay set and other accessories. All material shall be supplied by the Contractor.

Ordinary earthing by MS earth Rod 2500 mm long & GI strip of size 40x5 mm as per RESPO Schedule. Only Earth rod shall be supplied by the department & GI strip, nut bolts shall be provided by the contractor.

Erection of Distribution box 3 phase on newly erected pole with the help of pole clamp nut and bolts

Grouting of pole with the help of Cement, Coarse sand and brick ballast.

Supply & fixing of 11 KV D.O. fuse set.

Erection & commissioning of 100 KVA Transformer on existing double pole after providing LT copper L-Piece suitable for 200 Amp load. (All the material except transformer will be arranged by the contractor)

Installation & commissioning of 11/0.4 KV 250 KVA T/F including its connection from 11 KV line and LT line mounting of copper L-Piece providing and fixing of Al crimping Lugs, all material provide by department except nut bolt and copper L-Piece. (All the material except transformer will be arranged by the contractor)

Installation & commissioning of 11/0.4 KV 400 KVA T/F including its connection from 11 KV line and LT line mounting of copper L-Piece providing and fixing of Al crimping Lugs, all material provides by department except nut bolt and copper L-Piece. (All the material except transformer will be arranged by the contractor)

Dismantling of existing 250 KVA T/F by Opening of all the HT/LT Connection and its safe carriage upto JE Dump store /ESC Daliganj.

Dismantling of 63/100 KVA T/F opening of all the HT/LT connection and earthing. Loading and carriage from site to JE dump store/central store by the help of crane or by other safe method.

LUCKY ENTERPRISES

ARIHANT ELECTRIC COMPANY

CHAUHAN ELECTRICALS