07/2025-26 Purchase of UHWC Instruments

Technical Specification of sphygmomanometer Aneroid 300mm with cuff Key Technical Specifications: Cuff: Typically made of durable, washable material (e.g., nylon) and reinforced at the sides. Size: Ranges from child to adult sizes (small, medium, large, extra-large), and ideally, the cuff bladder length should be at least 80% of the patient's arm circumference and the width at least 40%. Fastening: Usually features Velcro or similar for a secure fit. Bladder: Inflatable bag within the cuff, connected to the inflation system. Inflation System: Bulb with a valve for inflating the bladder and a pressure release valve. Gauge: Aneroid: Features a dial with a needle indicating pressure, usually graduated in 2 mmHg increments from 0 to 300 mmHg. Digital: Provides electronic readings of blood pressure and may include features like pulse rate measurement. Tube: Typically made of rubber or silicone, crack-resistant, with a length of around 70 cm. Accuracy: Aneroid gauges are generally calibrated to meet certain accuracy standards, such as +/- 3 mmHg. Materials: Materials used in sphygmomanometers must be durable, corrosion-resistant, and suitable for the intended use. Environmental: Sphygmomanometers are designed to function within specific temperature and humidity ranges, typically 5 to 40°C and 15 to 85% RH.

Technical Specification of IV stand • Saline stand should have strong MS tubular construction mounted on five pronged base fitted with swivel castors of 50mm diameter. • Stainless steel saline rod should have double hooks. Stainless steel • I.V. rod should be height adjustable from 1620mm to 2340mm. All mild steel components should be • thoroughly pre-treated chemically to remove rust and foreign matter like Grease, Oil etc. by dip tank • process pre-treatment system. The treated Metal Surface should be coated with Epoxy Polyester • Powder and oven baked at 180 degree to 200 degree Centigrade to avoid contamination of the clean • metal surface from dust particles • ISO certification

Haemoglobinometer –set sahil type complete • With Square tube, brush, water bottle

Tracking Bag and Tickler Box Immunization

Technical Specification for Suction machine. • Power supply: 230-240V/50Hz • Double overflow-protection system (bottle and pump). • The safety device protects the pump against overflow: suction is interrupted when liquids reach the safety level in the small jar. • All components are reusable and can be steam sterilized at 134°C. • Connection tube: Silicone tubing • Suction tube: Reusable silicone tube: • Should be with safety device. • Bottle /jar overflow protection device. • Oil free Lubrication pump • Machine should be ISO mark

Technical Specification for Stabilizer • Should work for input voltage range of 100-240 volt AC Single phase with high input voltage cut at 240 volt and 2.5 KVA • Step up voltage – 10 volt per stage. • Overload protection at input automatic cut-off time-between 2-4 seconds of under voltage/over voltage cutoff at output. • Maximum power loss due to leakage of current-2% • Restart delay of 6-9 minutes after the cut-off along with quick start button. • The output voltage should be stable and capable of operation continuously with respect to any change in ambient temperature and regulation should be automatic. • Automatic line voltage stabilizer (step type) should be of copper wound complete with voltmeter (digital/analog) with selector switch to indicate input and output voltage and construction conforming to IS:8448/1989 Reaffirmed 2003. • The output side shall be provided with MCB of suitable rating duty ISI marked. • Provision for two output sockets of 15 Amps, ISI marked. • Details of transformer should be furnished, such as rating, weight of winding and core, which should be verified during inspection. • A metal Oxide varistor (MOV) for surge suppression should be provided and connected directly on the power line. • 4 Line Emitting diode should be provided to indicate power input, power output equipment in standby condition and high input voltage. • Stabilizer Should be ISI Certified & Marked.

Technical Specification for Vaccine Carrier • Vaccine Storage Volume 1.7 Litter • Weight Full Loaded 4 kg • Weight Empty 1.6 • External Dimensions ( L*W*H*) 25*25*28.5 • External Dimensions (L*W*H*) 17*17*18.5 • Cold Life at +43 degree C. • Warm Life a -20 degree C. • Cold Life at 43 .. -6 hrs. • With 4 Ice Pack

Technical Specification • ICE Pack 300ml