Proposed Estimate Installation of RO unit for Drinking water in Palashi Market near road side Honuman Mandir J L468 Mouza-Palashi West Under Radhamohanpur 1 Gram Panchayat Under 15th CFC Fund of FY2025 26.ID 113917678

Supply of High Density Poly-ethylene Pipe conforming to IS - 4984 - 1985(Dia)Schedule 40 [40 mm dia]6 Kg / Sq.Cm.32mm (Working Pressure) Including Labour for Laying(Local quotation rate Excluding GST) 40 mm dia pipe (local qutation rate excluding GST)

Supply of High Density Poly-ethylene Pipe conforming to IS - 4984 - 1985(Dia)Schedule 40 [40 mm dia]6 Kg / Sq.Cm.32mm (Working Pressure) Including Labour for Laying(Local quotation rate Excluding GST) 25mm dia pipe (local qutation rate excluding GST)

Supply of High Density Poly-ethylene Pipe conforming to IS - 4984 - 1985(Dia)Schedule 40 [40 mm dia]6 Kg / Sq.Cm.32mm (Working Pressure) Including Labour for Laying(Local quotation rate Excluding GST) 15 mm dia pipe (local qutation rate excluding GST)

40 mm dia.,25 mm dia,15 mm dia Tee,plug, Nipple, Bend ,Flang, enlarge with flange Nipple ,Nut bolt,valve as necessary.supply should be made as per direction of E.I.C

(g) Supplying, fitting and fixing alloy iron with brass spindle bib cock/ stop cock of approved brand and make, spray painted and tested to 21 kg per sq. cm. (i) 15 mm {Item-7(g), Page no-7}

Compact Ball valve with SS Handle UPVC Fitting 40mm dia full way valve 1 Nos @705.00

Supply of 1500 Lit. P.V.C(Sintex ISI) Water storage Tank of approved quqlity with closed top with lid-Multilayer

Cement concrete with graded jhama khoa(30 mm.size) excluding shuttering. PCC(M10)In ground floor and foundation. (a) 1:3:6 proportion (1.5 x 1.5x0.100=0.23 cum)angle Pocket

Ordinary cement concrete ( Mix – 1:1.5:3) with graded stone chips (20 mm Nominal size ) excluding shuttering and reinforcement if any. as per relevant ( IS Codes) Pakur variety. In Ground floor.

Hire and labour charges for shuttering and necessary staging upto 4 m using approved stout props and 20 mm to 30 mm thick wooden shutter blank & approved thickness with required tracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works. As per decision & direction of EIC.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars ,stirrup,binders etc initial straightening and removal of loose rust(if Necessary)cutting to requisite length,hooking and bending with 16 guage black annealed wire at every intersection,complete as per drawing & direction. (Tor Steel)1.2% of concrete volume 2 cum .

125 mm th. Brick work with 1st Class Brick in cement mortar (1:4) in superstructure Gr. Fioor. 1x2(1m+1m)x0.900= 3.6 sqm 1mx0.600m=0.600 sqm

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar (b) 15 mm thick plaster(wall), [Page-189, Item no. 01(i) b ]

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. In 2nd Floor: (b) Two Coats , [Page-196, Item no. 08]

Dry Distemparing to interior walls or ceiling including cleaning,

Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm dia J or L hook bolts,limpet and bitumen washer .. Puttu complete with 150 mm end lap and one corrugation minimum side lap.(Payment to be made on area of finished work) GCI sheet to be supplied by contractor. In roof with 0.60 mm th. Sheet(1x6x3.417=20.502 m3)

M.S. structural works in roof trusses with tubular sections conforming to IS : 806-1957 & IS : 1161-1958 connected to one another with bracket,gusset cleats as per design,direction of E.I.C. Complete including cutting to requisite size,fabrication with necessary metal arc welding conforming to IS : 816-1956 & IS 9595 using electrodes of approved make and brand conforming to IS : 814-1957,haulage,hoisting and erection all complete. The rate includes cost of rolled steel sections,consumpables such as electrodes,gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges,labour insurance charges etc.Payment to be made on the basis of calculated weight of structural tubular members as specified in relevent IS code in finished work. Payment for gusset,bracket,cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a height of of erection 8 m / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4 m beyond the initial 8 m or part thereof.

(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor) (ii) Grill weighing above 16 Kg./sq.mtr and above ( It.No-1, page-200)

Supplying, fitting & fixing with installing of WATER ATM with RO 500Lph, for drinking water and Chiller (Voltus/Usha make) system 4080L for Cold water option, Coin type LCD ATM Panel (Intra/Astero) with auto system. Cold drinking water option set up in the machine with multi coin operation full complete set. SS structure + MS/PVC board/plate for outside body covering with vinyl strikering as per requirement for ATM

Collection sample of water of the tube well in clean and washed container and sending the sample to the laboratory for chemical and arsenic testing and send report.

Providing marble plate carrying inspection the name of the work allotted etc. (size 500X500m)

GIS Photo Takeing ( 3 Stage)