Construction of Pump House with head Regulator at RD 0 of Gharwal Link Drain out-falling at RD 46000-L of Chhapra Drain

Amount

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material as per clause 304 of MORT&H specifications Ordinary soil, Depth 3 m to 6 m as per HSR No 4.12

Centering and shuttering of concrete foundation and foundation beams HSR Item No 6.29.1

Design mix cement concrete of grade M-15 with minimum cement contents 240 Kg per cum in foundation and plinth. HSR Item No 6.22.2.2

Design mix cement concrete of grade M-25 with minimum cement contents 300 Kg per cum in foundation and plinth. HSR Item No 6.25.1

Design mix reinforced cement concrete of grade M-25 with minimum cement contents 300 Kg per cum in first storey upto 4.00mts height above plinth level HSR Item No 6.25.2

Centering and shuttering for faces of walls, partitions, retaining walls well steining and the like (vertical and battering) including attached pilasters, butteresses etc. HSR Item No 6.29.2

Centring and shuttering for slab curverts with smooth exposed surface of slab up to 3 mtrs span (HSR item No 6.30.3

Ist class brick work laid in cm 1:3 in F&P i/c supply and C/O all materials and curing etc. as per HSR item No15.6.1

12 mm thick cement plaster 1:4 (HSR Item No 11.5.3

Cement Pointing in 1:3 as per Hsr no. 11.25.1

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and utside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of dequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x0.90 mm M.S. laths with 0.90 mm thick top cover as per Hsr no. 13.37.3

Providing weep hole in F.O. wall i/c well drainage filter as per Hsr no. 27.15

Tile terracing Providing and laying brick tiles over mumty roofs, grouted with cement mortar 1 :3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement, over 12 mm layer of cement mortar 1 :3 (1 cement : 3 fine sand) and finished : as per Hsr no 9.14.1

Supply of cold twisted deformed (ribbed/tor steel) bars for RCC works where not included in the complete rate of RCC i/c bending, binding and placing in position complete (HSR item No. 6.33.3

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. As per Hsr no. 13.28

Planking of commercial hard wood such as hillock champ chikrasy planed on both sides rebated and fixed in position i/c nails and screws etc. 50 mm thick (HSR item No.12.24.3)

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete 50x12 mm as per Hsr no. 12.3.1.1

Applying pink primer or aluminium priming coat on wood work including preparation of surface, Knotting and topping etc. as per Hsr no.11.77

Providing and fixing gates as per design and drawing @ 50000 per Sqm (rate as per sanction estimate of replacement of gate and gearing of head regulator

Providing and laying 80mm thick factory made cement concrete inter1ocking sqm 128 586 713 paver block of M -35 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over (BIS 15658:2006) and including 60mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. as per Hsr no 10.77

White washing with lime to give an even shade Hsr no. 11.61.1 New work

(Trash Reck )Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and laying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, as per Hsr no. 13.29.2

150 mm dia PVC pipe as per Hsr no B0242

PVC Bend 150 dia as per Hsr no. B0240

shamsher singh contracctor

HARINDER PHOGAT

THE RAM RAI MAHA LUXMI CO OP L C SOCIETY