Repairs to plinth protection, flooring, pathway, drain, fencing and compound wall to OTM/Md accn at CQA(V) and DAD complex under GE(S) Ahmednagar

Amount

Demolition of Brick work/stone boulder masonary built in CM including all quoins, arches, pillars, etc complete all as specified and directed.

Dismantling fencing wire mesh and mild steel angle iron fencing post any type complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Surface dressing n exc 15 cm deep in soft/ loose soil including removing grass bushes etc and making area workable complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m in depth , for foundation , etc or shafts ,wells ,cesspits , manholes ,pier holes , etc n exc 10 sqm on plan and nexc 1.5 m depth and getting out in soft / loose soil complete all as specified and directed.

100 mm thick PCC 1:4:8, type D2, using 40 mm graded stone aggregate as in sub-base complete all as specified and directed.

Reinforced cement concrete M-25 design mix (using 20 mm graded stone aggregate) as in footings, foundation,beams, plinth beams, base for columns and mass concrete etc complete all as specified and directed.

Reinforced cement concrete M-25 (design mix) using 20mm graded crushed stone aggregate as in columns, pillars, piers, posts and struts etc. complete all as specified and directed.

Reinforced cement concrete M-25 (design mix) using 20mm graded crushed stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5 m span etc. complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work vertical or to batter complete all as specified and dorected.

Formwork to edges of concrete flats , opening in cocnrete walls, floors and roofs and side of RCC/PCC bands in walls and simillar work all exceeding 20 cm wide complete all as specified and directed.

Formwork for rough finished surfaces of concrete to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed.

Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders and binding with and including mild steel wire(annealed) not less than 0.90mm dia as in stirrups, complete all as specified

Precast cement concrete block masonry with solid block of PCC (1:5:8) using 20 mm stone aggregate, exc. 10 CM in width and built in CM (1:6) complete all as specified and directed.

Rendering 10 mm thick on fair faces of concrete/masonary surfaces in cement mortar 1:6 finished fair and even without using extra cement complete all as specified and directed.

Prepration of new plastered and unplastered surfaces and applying two coats of cement base paint complete all as specified and directed.

Mild steel work as in posts and struts in fencing including cutting tops to shape as required, drilling holes, notching for wire etc., flat iron fillets (for securing wire mesh etc ) including all necessary drilling, bolting etc and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.

Mild steel work as in bands , straps supports or stays for holdfast 12 mm sq bar flat including cutting to shape as required complete all as specified and directed.

Galvanized 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins etc complete all as specified and directed.

Preparation of new steel surface of any description n.exc 10 cm in width or grith and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

4 mm dia galvanised steel wire , 150 x 100 mm mesh , made up in to mattress or cages, lapped, wired and laid in position including closing after filling complete all as specified and directed.

Cement concrete 1:2:4, type B1 using 20 mm graded stone aggregate as in copings, bed plates, kerbs including weathering, slightly rounded for chamfered angles and throating, including necessary formwork as required complete all as specified and directed.

Demolition of cement concrete (un reinforced) of any description and in any position not otherwise specifically descibed complete all as specified and directed.

Dismantling of, stone slab of any description or thickness in floor, aprons etc laid, bedded and pointed in cement motor complete all as specified and directed.

Cement concrete 1:3:6, type C-2, using 40 mm graded stone aggregate, 75 mm thick as in plinth protection including finishing the surface fair and even laid in alternate bays system, length of each bay n exc 1.5 mtr, including forming 12mm wide and 50 mm deep joint, filled with mastic filling to the full depth comprising mixture of one part heated blown bitumen of 85/25 penetration and two parts sand by (volume) complete all as specified and directed

Machine cut kota stone flooring 20-25 mm thick (size of kota stone slab 22"x22") laid over and including 20 mm thick bedding layer CM 1:6 with pigments to match the shade of slab including cutting, rubbing and mirror/ granite finish polishing including removing dust complete all as specified and directed.

All as per ser item no. 27 here-in-before but 18 to 20 mm thick kota stone on vertical surfaces such as in skiting /dado of size as required at site including10 mm thick backing coat of plaster in cm (1:4) complete all as directed.

20 mm thick Granite of any type work (table rubbed and polishing) as in steps, jambs, pillars, windowcill, cooking platform and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite complete all as directed.

Taking Down and refixing and repalcing the existing aluminium partition , Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified.

Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified directed.

Powder coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified directed.

Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified directed.

Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed.

9 mm thick Prelaminatd particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with glazing clips, rubber neoprene packing etc to aluminum frame complete all as specified and directed.

200 mm long powder coated Aluminium anodised barrel tower bolts of extruded section and fixed to aluminium doors etc complete all as specified and directed.

150 mm long Powder coated Aluminium anodised barrel tower bolts of extruded section and fixed to aluminium doors etc complete all as specified and directed .

75 mm long Mortice lock, vertical type having 4 livers fixed in Aluminium Doors for locking purpose complete all as specified and directed .

150 mm long powder coated alumunium handle fixed to doors etc complete over as specified and directed.

BHAVIN INFRA

PRADIPKUMAR POPATRAO THUBE

G. K. Engineering And Fabricators

Maruti Abhiyantriki

Chandrama Construction

M/s. Sagar Traders

MS. A.S. CONSTRUCTION

MS. G.A. CONSTRUCTION

m/s shivam tools and equipment