8308 SPECIAL REPAIRS TO ROOF AND CEILING OF BLDG No. NP-94 ICU PORTION AT AICTS UNDER GE SOUTH PUNE

Amount

Dismantling of single layer mangalore pattern or similar tiles in roofing laid dry complete all as specified and as directed.

Dismantling battens for tiles, shingles etc of any size including tilting fillets spaced exc. 15 cm complete all as specified and as directed.

Dismantling timber scantling, unframed in post, rafters, purlines etc under 40 sqcm in section where necessary complete all as specified and as directed.

S & F roof sheeting prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified incl dismantling of old sheet complete all as specified and as directed. (Note : The above rate should be include of necessary scaffoldidng and Crane expenses with safety measures equipment for G+4 building and any demolition and repair work carried out during fixing sheets)

S & F roof sheeting prepainted galvalume aluminium zinc coating GI based plain sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to to wall, ridges , valley gutter etc fixed with self tapping screws incl dismantling of old sheet complete all as specified and as directed. (Note : The above rate should be include of necessary scaffolding and Crane expenses with safety measures equipment for G+4 building and any demolition and repair work carried out during fixing of Sheets)

M&L for MS structural steel work, framed as in trusses, purlins, rafter, post etc. conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plat, gusset plate and also erecting in true position complete all as specified and as directed. (Note : The above rate should be include of necessary scaffolding and Crane expenses with safety measures equipment for G+4 building and any demolition and repair work carried out during structural works)

M&L for PCC 1:2:4 type B1 using 20mm graded stone agg as in roof kerbs or mud stops, rounded or chamfered on edges incl necessary form work required complete all as specified and as directed.

Dismantling ceiling/boarding of any description, fixed in any position like partition etc with nails including frame work of timber complete all as specified and as directed.

M&L for Gypsum ceiling board for ceiling prepainted, perforated finish, 595 x 595 x 9mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2 mm thick G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light complete all as specified and as directed. (Make : Gypsum board/Indian gypsum product/Armstrong world)

S&F POP false ceiling with 12 mm thick glass fibre reinforced Gypsum ceiling tiles of, prima fine fissured micro look white coloured laid over and including grid work 600x600mm using GI powder coated “T:” section grid (Silhaute type) as Main 'T' 38 X25 mm , cross 'T" 25x25mm and wall angle 25x25mm grid and 6 mm dia GI suspension wire etc incl over a coat of 1-2 mm thick POP finish complete all as specified and directed (Make :- Saint-Gobain, Armstrong, Diamond or Equivalent.)

Preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of Red oxide zinc chrome complete all as specifed and directed.

Taking down cement plaster from walls, ceiling including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and as directed.

M&L for Ready mix rendering 15mm thick in CM (1:4) on brick / concrete surfaces using water proofing compound as per manufacturers instruction finished with sponge finish complete all as specified and as directed. (NOTE : WPC shall be measured and paid seperately)

Supply only water proofing compound complete all as specified and as directed.

M&L for ready mix rendering 15mm thick cement plaster on block / concrete surfaces in CM (1:6) on irregular faces of walls using sagol finish complete all as specified and as directed.

M&L for preparation of new surfaces and providing two coats of weather proof exterior emulsion paint on walls complete all as specified and directed.

M&L for two coats of OBD on walls over a coat of alkali resistance primer including preparation of new plaster surfaces with 1mm thick wall care putty/wall putty surfaces complete all as specified and as directed.

M&L for two coats of OBD on walls over a coat of alkali resistance primer including preparation of old plaster surfaces of wall surfaces with 1 mm thick wall care putty complete all as specified and as directed.

Demolition of brick work or stone/boulders masonry built in Cement Mortar complete all as specified and as directed.

M & L for brickwork with fly ash bricks, straight or curved on plan exc. 6m mean radius, built in CM (1:6) complete all as specified & directed.

Taking down carefully exising unserviceable aluminium point wiring (light, fan, socket or power), complete (fitting such as switches, ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making dood disturbed surfaces of wall, floor etc. complete all as specified and as directed.

Taking down of old unserviceable sub main wiring of any type complete all as specified and as directed.

Taking down old unserviceable MCB DBS of any type and size complete all as specified and as directed.

M&L for Point wiring any length using approved colour coding as per IS, with stranded copper conductor 1.5 Sqmm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade, (FRLS) ISI-694 marked in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, with mild steel sunken boxes with earth dolly duly concealed in wall, painted with two coats of anti corrosive paint over a coat of red oxide primer, internally, covered with plastic laminated sheet suitable for switches, including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly, complete in all as specified for the following:-

One light / fan point controlled by one way switch 5 Amps complete all as specified.

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified.

One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified.

Bell/Buzzer points controlled by one bell push.

All as per item No 24.00 above for socket power point but with stranded copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet on independent board including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed.

S&F switch piano type flush, single pole, one way, 5Amp 230 Volt complete all as specified and as directed.

S&F switch piano, flush type, single pole, one way, 15 Amp 230 Volt complete all as specified and as directed.

S & F socket outlet 5 pin,5 Amp 230 Volt, complete all as specified and directed.

S & F celling rose 2/3 terminals, PVC/ polycarbonate, isolated body ISI marked complete all as specified.

S&F Bell push 6 amp 230 volt 50 HZ AC supply complete all as specified and as directed.

S&F Socket outlet multipurpose having provision for 3 pin, 15 Amp and 3 pin, 5 Amp, piano flush type complete all as specified and as directed.

S & F step type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified and as directed.

Supply and fix bell electric Ding dong suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

Taking down existing FTL rod 36/40 watt and supply and fix surface wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver for LED tube complete with retrofit LED energy saving recess/surface mounted luminaries, high efficiency diffuser for soft glare free light of capacity 20 watt suitabe of operation on 230 volt 50 Hz AC supply complete all as specified and as directed. (Make Cat Part No ENDURALINEARNEOBS20WLED865SPCWH of Havells or equivalent model in Wipro/HPL/Philips as approved by GE)

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed. (Make- PETAL2X2PLR36WLED840S OF Havells or equivalent specified here-in-after)

Supply and fix lamp holder PVC insulated body with back plate suitable for batten complete for 230 volt 50 Hz AC supply complete all as specified and as directed.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 4.0 Sqmm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size concealed in wall etc including one run of PVC insulated 4.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. (Note :- Two runs of 4.0 sqmm cable,one run of 4.0 sqmm cable for earth and one run of PVC conduit will be measured as one unit )

M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLS cable with stranded copper conductor of size 4 Sq mm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc two run of PVC insulated with 2.5 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. (Note :- Four runs of 4 sqmm cable, two runs of 2.5 sqmm cable and one run of PVC conduit will be measured as one unit)

Taking down ceiling fan of any size/sweep after disconnecting the wire from existing ceiling rose and refixing the same after cleaning dust, oiling greasing etc including providing flexible three core from ceiling rose to connector of fan complete all as specified and as directed.

S&F IP-54, IK 09, protection metal double door Vertical TPN -DB rated busbar, 415 volts, 50 HZ complete with interconnection links, blanking plates, cable ties, identification labels TPN 12 way, 24 modules suitable for accommodating 100 Amps MCCB 4 pole as incomer and SP/TP MCB as out going and concealed in wall including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing item complete all as specified and as directed.

Supply and Fix MCCB 100 Amps, 16 KA, 4 Pole, 415V, electronic protection unit complete all as specified and as directed.

S&F MCB SPN DB 12 way ,double door, with 200 amp rated busbar 240 V, SPN recess mounted/wall mounted complete all as directed and specified.

S&F MCB SP 6-32 Amps, 10KA, 'C' series complete all as specified and as directed.

S&F MCB SPN 40 amps, 10KA, 240V, 'C' series complete all as specified and as directed.

S & F Sheet metal, 20 Amp Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps,10 KA breaking capacity,'C' series, 240 V complete all as specified and as directed.

M&L for Earthing complete with galvanised steel earth plate electrode 60cmX60cmX6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion complete all as specified and as directed. (Note : GI earthwire and GI protection pipe upto 7.5 mtr length shall be included in this item.)

M & L For fixing earth continuity conductor or main earth lead fixed to wall or buried in ground or drawn in GI pipe with 4 sqmm GI Wire complete all as specified and as directed.

S&F in repairs modular switch piano, flush type, single pole, one way, 15 Amp 230 Volt complete all as specified and as directed.

S&F in repairs modular Socket outlet multipurpose having provision for 3 pin, 15 Amp and 3 pin, 5 Amp, piano flush type complete all as specified and as directed.

S&F in repairs Bell push 6 amp 230 volt 50 HZ AC supply complete all as specified and as directed.

Supply and fix in repairs bell electric Ding dong suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

M/s.BAJRANG CONSTRUCTION

M/S Sandeep Enterprises

greenstone construction

Suma Construction

M/S Narendra Construction