Civil and furniture work in Municipal Hospital at Khopoli

Amount

ALUMINUM PARTITION WORK Providing & fixing aluminum partition to the required height partly glazed and partly paneled or fully glazed or fully paneled using aluminum section of Jindal 2425 satin finish anodizing of required size for bottom, top, middle & vertical rails at required intervals paneling with 12mm thick Nosva pan or anchor both side pre-laminated board fixed with sloping aluminum beading around with neoprene gasket glazing with 5.5mm frosted/ bajri/ plain glass of approved make like M/s.Triveni, Shri. Vallabh/J/A/G pilkinten fixed with aluminum channel beading two way PVC lining/ rubber gasket to ensure water tightness and No’s rattling including providing necessary cover mould using suitable aluminum section so as to take care of gaps between the walls/ ceiling / flooring and partitions etc. including providing and fixing necessary fittings as specified and directed. Fully paneled 100 mm x 50 mm

S.S. SINK: - Providing and fixing in position Stainless Steel sink with drain board or without drain board of Nirali make only resting over bracket with waste coupling including fabricating bracket from 'B' class GI pipe with necessary welding, chiselling in wall and fixing the sink in position with waste coupling, bottle trap all complete as per the specified and directed by engineer-in charge. SS Sink WITH DRAIN BOARD (ELEGANCE 1.00MM THICK)

S.S. SINK: - Providing and fixing in position Stainless Steel sink with drain board or without drain board of Nirali make only resting over bracket with waste coupling including fabricating bracket from 'B' class GI pipe with necessary welding, chiselling in wall and fixing the sink in position with waste coupling, bottle trap all complete as per the specified and directed by engineer-in charge. SS Sink Without DRAIN BOARD (ELEGANCE 1.00 MM THICK)

MARBLE Providing & laying 20mm thick Rainagar / Makarane / Adonge / 1st quality marble slab in door sills/lift architraves/dado/platforms/sinks with all exposed edges machine cut, double machine polished (mirror polish) laid over a bedding of cement mortar 1:3 35 mm thick in true plane curing finishing the joints neat, making holes in slab for waste coupling etc. complete including making grooves in walls for fixing and making good the surface. White cement slurry is used instead of grey cement slurry Raj Nagar Plain

BRICK WORK: Brick work at all floor level with cement mortar 1:4 using well burnt locally available bricks of approved quality including scaffolding, raking out joints above ground level simultaneous and as directed by engineer in charge. In foundation & plinth drain walls chambers & superstructure of all floor levels.

Providing and fixing CPVC Pipe 15 mm including all fittings.

P.V.C. PIPES: Providing, laying, jointing, fitting, testing heavy quality P.V.C. pipes of Prince, Supreme etc. make & of required dia including all fittings required as per site requirement & laying the same at any floor levels including scaffolding all jointing materials & clamping in wooden blocks if required etc. complete as directed & specified by Engineer-In-Charge. PVC Pipe 40 mm

E.W.C.: Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, level white P.V.C. flushing cistern with capacity as mentioned below, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. It should include 'P' or 'S' trap as per approved make with left or right vent in position including fixing it on chair brakcet or wall bracket. With necessary C.P. brass screws & plugs etc. Make : Hindware/Parry ware/cera Floor mounted EWC Universal with 5 to 7 Ltrs Cistern white colour

WOODEN COUNTER (WIDTH UPTO 750MM )Providing making & fixing in position counter consisting of top 2'-6" made out of 25mm commercial ply of approved make supported on drawer unit of ht. 2 inch -6 inch and vertical supports at regular internals as shown in drawing made out of 15mm thick approved commercial ply and the counter made above the table of required width & size with vertical divider all made out of 19mm thick approved commercial ply and 12mm thick appVD. commercial ply for front side of counter with 10mm t.w lipping on all exposed edges and table top edges should be 1 ½ inch x1 ½ inch finishing with and approved colour & moulding plastic laminate 1.5mm thick for all exposed surface etc. all non laminated surface shall be polished with 2 coats of french polish of required shade soft board of 12mm thick pasted with approved adhesive and covered with tepestery felt cloth of required colour including cost of all hardware like hinges, tower bolt, handles, knobs, computer ready-made keyboards, cable manager, CPU stand made by 19mm thick ply with polish and locking arrangement with Godrej multipurpose lock etc. complete as specified and directed.

COMPUTETR TABLE L shape or Rectangular Providing making & supplying computer table made out fo 19 mm commercial ply for table top, mounted on the vertical side for 19 mm commercial ply and cabinet made out of 19mm commercial ply for sides, shelves & shutters making concealed monitor arrangement by providing 8 mm thick clear glass on table top of required size with edge polish as shown in drawing drawer and ready made key board drawer with heavy sliding channels with powder coated handle for shutter, cable manager drawers all edges shall be lipped with 6mm thick T.W. lipping patti. All exposed faces should be 1.5mm thk laminate of approved colour and non laminated area should be french polished including cost of other materials labor etc. as per drawing and as specified and directed by Engineer-In-Charge. Computer Table with all inner surface with 1mm thk approved laminate.

WOODEN CABINET Providing & fixing cabinet made up of 19 mm. Commercial ply of approved make for top, bottom, sides & shelves & 8mm commercial ply approved make for back side Door shutter made up of 19mm thick commercial ply and outer surfaces and top of shelves for open type cabine should be laminated with 1.5mm thick approved plastic laminate sheet of required colour including all brass fittings such as hinges, tower bolts, ball catches, stopper, handle, kNosbs as per shown in drawing or approved by Engineer-In-Charge etc.and all exposed edges lipping with 6mm Thick T.W. lipping patti.locking arrangement with Godrej multipurpose lock etc. all complete as specified & directed by Engineer-In-Charge. WOODEN CABINET

P/F only Gypsum board for old frame work

Supply of Fabric office chair at site

Supply, installation, testing and commissioning of 300 mm sweep 230 Volt AC size 1200 RPM metal body Heavy Duty exhaust fan with guard and mounting arrangement etc. as required including Wiring for exhaust fan with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit from nearby distribution board with modular type surface electrical switch socket power point for exhaust fan suitable GI box and earthling the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Note- Work includes SITC of frame work for mounting of exhaust fan Necessary fixing accessories.

Supply, installation, testing and commissioning of LED Tube light fixture and wiring termination with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit from nearby distribution board including supply and fixing of modular type surface PVC board and switches ( PVC board and switches Qty 03 Nos ) for lightings.

Supply / Providing & fixing of 50 mm thick resin bonded glass wool / fibre glass wool of 24 kg/cum insulation of UP twiga ltd make installation on existing new false ceiling by using suspended type support from structural steel or tin roof. Suspension shall be 22 swg wire with butt joint provision or adjustable hook. The fibre glass wool material shall be packed in black colour heavy micron polythene waterproof base of suitable size to match the false ceiling panels. Existing new false ceiling panel shall not be damaged during laying of insulation bags Job includes removal of false ceiling & refixing after installation of insulation work for thermal conductivity. If false ceiing panels damaged during installation of Thermal Insulation agency have to replace free of cost damaged panels of same brand. Complete job as directed by EIC. Material Delivery challan needs to be submittted EIC.

Providing & Applying one / two coats of primer & thereafter two coats of paint as mentioned below of approved make First quality Asian Paints (Apcolite) / Goodlass Nerolac/ ICI to the required colour scheme and as per manufacturers instructions / specifications to the walls, beams, columns, ceilings, partitions doors etc. including thoroughly scrapping the existing surface with sand papers, removing old paint, filling up crevices and Applying and Levelling the existing surface with Birla White Cement based / Coloured waterproof Putti/POP Coat of average thickness of 1 mm or 2 mm as per requirements of approved brands necessary to obtain smooth surface, filling of cracks, removal of stains, painting spots on floors, aluminium window frame & glassetc including scaffolding etc as to the entire satisfaction of engineer in charge. Using Acrylic emulsion paints ( Plastic Paints) Paint 2 COAT

Providing & Applying one / two coats of primer & thereafter two coats of paint as mentioned below of approved make First quality Asian Paints (Apcolite) / Goodlass Nerolac/ ICI to the required colour scheme and as per manufacturers instructions / specifications to the walls, beams, columns, ceilings, partitions doors etc. including thoroughly scrapping the existing surface with sand papers, removing old paint, filling up crevices and Applying and Levelling the existing surface with Birla White Cement based / Coloured waterproof Putti/POP Coat of average thickness of 1 mm or 2 mm as per requirements of approved brands necessary to obtain smooth surface, filling of cracks, removal of stains, painting spots on floors, aluminium window frame & glass etc including scaffolding etc as to the entire satisfaction of engineer in charge. Using Acrylic emulsion paints ( Plastic Paints) Paint 1COAT

Providing and Applying and Levelling the existing surface with Birla White Cement based / Coloured waterproof Putti of average thickness of 1 mm or 2 mm of approved thickness, brand and manufacture, over the plastered wall surface to prepare the surface even and smooth ready for painting purpose etc complete ( Rate inclusive of Scaffolding Matetrial, Labour Charges) Etc.

arcoma