Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.3 LAccepted-AOC | L1 | Accepted-AOC Accepted being lowest | |
| 2 | L2₹35.8 L+₹1.8 L (5.43%)Rejected-Finance VEENA SADAN PLOT NO 63 VARANGAON ROAD SUNDAR NAGAR BHUSAWAL 425201 | BHUSAWAL | JALGAON | MAHARASHTRA | 425201 | L2 | Rejected-Finance Rejected being other than lowest | |
| 3 | L3₹37.4 L+₹3.4 L (10.1%)Rejected-Finance | L3 | Rejected-Finance Rejected being other than lowest | |
| 4 | L4₹38.0 L+₹4.0 L (11.7%)Rejected-Finance | L4 | Rejected-Finance Rejected being other than lowest |
Tender Value
₹36 L
EMD Value
₹72,000
Closing Date
10 Feb 2020, 6:00 pmClosed
Lt Col Vipin Kumar Singh
GE (S) Ahmednagar, Military Engineer Services, Ahmednagar- 414002
SPECIAL REPAIRS TO BUILDING NO.P-41, P-44, NP-20, NP-21, NP-22, NP-23, NP-24, BACK WATER TANK AND HIGH LIFT ROOM AT PUMP HOUSE AND PROVN OF VITRIFIED TILES IN BLDG NO. P-50 AT MIL STN BHUSAWAL UNDER GE (SOUTH) AHMEDNAGAR
2020_MES_315652_1
8677/E8
Open Tender
Miscellaneous Works
Item Wise
180 days
Bhusawal
class D cat a(i)
7 documents required · 7 mandatory
₹500
Yes
Garrison Engineer (South) Ahmednagar
₹72,000
Yes
25 Feb 2020
17 Jan 2020
11 Feb 2020
17 Jan 2020
10 Feb 2020
3 Feb 2020
17 Jan 2020 - 23 Jan 2020
Amount
Demolition of stone slabs and tiles of any description or thickness in floor apron etc laid, bedded and pointed in any mortar complete all as specified and directed.
Dismantling floor .hearth or wall tiling including cement mortar bedding, removing serviceable tiles to store and removing the rubbish off the premises. complete all as specified and directed.
Taking down cement plaster of any description on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed.
Demolition of brick or stone / boulder masonry / precast block walling built in cement mortar complete all as specified and directed.
Machine cut cudappa stone slab 20 to 25 mm thick laid over kitchen cooking platform/ including fixing edge in wall , laid over and including 15 mm thick cement screed in CM 1:4 and jointed with grey cement slurry and pointed with white cement mixed with admixture of pigment to match the shade of stone including rubbing and polishing complete all as specified and directed.
20 mm thick granite (of any type) work machine cut, in vertical surfaces such as skirting / dados etc laid over and including 15 mm thick cement screed in CM 1:4 and jointed with grey cement slurry and pointed with white cement mixed with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.
Non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm, as in floors etc. laid over and including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.
Non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, as in floors etc. laid over and including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.
Glazed ceramic tiles (plain or printed) of each tile of size exceeding 0.11 Sqm but not exceeding 0.18 sqm, 7 mm thick as on vertical surfaces like dado, skirting etc jointed in neat cement slurry and pointed in coloured cement laid over and including 10 mm cement plaster backing in CM 1:4 complete all as specified and directed.
Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, surface finished even and smooth without using extra cement complete all as specified and directed.
Sinks made of stainless steel 1 mm thick without drain board for kitchen or laboratory with plugs, washers and wastes inclduing bedding in cement mortar on to dward wall or inclcuding fixing cantilver brackets and connecting, union to pipe , overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm, fixed in repairs,complete all as directed.
Taking up or down GI steel tubing and connections including cleaning for re-fixing or removal of 15 mm bore pipe complete all as specified and directed.
Taking up or down GI steel tubing and connections including cleaning for re-fixing or removal of 20 mm bore pipe complete all as specified and directed.
15 mm bore galvanised iron tubing medium grade, ISI marked, complete with all fittings and fixed complete, concealed in walls or laid in floors complete all as specified and directed.
20 mm bore galvanised iron tubing medium grade, ISI marked, complete with all fittings and fixed complete, concealed in walls or laid in floors complete all as specified and directed.
Refixing old GI steel tubing 15 mm bore and connections in new or old position (Walls, ceiling,floors, etc) complete with all new fittings and concealed in walls or laid in floors etc complete all as specified and directed.
Refixing old GI steel tubing 20 mm bore and connections in new or old position (Walls, ceiling,floors, etc) complete with all new fittings and concealed in walls or laid in floors etc complete all as specified and directed.
Water closets, Vitreous China, Orissa Pattern of size 580 x 440 mm, with white integral foot rest including cast iron `P' or `S' trap & connections to flushing pipe, anti syphonage pipe etc, fixed in repairs complete all as specified & directed.
Vitreous China wash hand basin White of 630 x 450 mm size flat back including cutting for and pinning in ends of brackets, including waste coupling CP and waste / vent pipe and brackets but excluding taps, fixed in repairs complete all as specified & directed.
10 ltr capacity PVC coloured flushing cistern high/low including ball valve, bracket inlet, outlet PVC pipe, fixed in repairs, complete all as specified and directed.
PVC connection 15 mm bore, 60 cm long with 2 nos CP brass check nuts fixed in repairs complete all as specified and directed.
15 mm bore bib taps,fancy type, chromium plated, screwed down screwed for iron pipe or for brass ferrule fixed in repairs complete all as specified and diercted.
15 mm bore stop valves, fancy type, cast copper alloy,chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions, fixed in repairs complete all as specified and directed.
75 mm dia cast iron floor trap plain with CP gratings including jointing with cement and setting in and including PCC 1:2:4, type B1, fixed in repairs etc complete all as specified and directed.
75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls as in repairs complete all as specified and directed.
PVC (SWR) bends any radius, with access door of 75 mm bore,fixed in repairs complete all as specified and directed.
Low density polyethylene (LDPE) pipes 40 mm bore of pressure rating 6 Kgf/ Sqcm fixed in repairscomplete all as specified and directed.
Brass chromium plated swivel shower rose 125 mm size including shower arm fixed to steel pipe and union, fixed in repairs complete all as specified and directed.
Brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges fixed with CP screws and plastic gutties complete all as specified and directed.
Complete removal of existing treatment fron surfaces of walls, filling up undulations with wall putty on entire surface of wall applying two coats of oil bound distemper over a coat of primer after smoothening of surfaces complete all as specified and diercted.
Preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Dismantling wall & ceiling boards (fibre, pulp,insulation etc or insulation boards any thickness including scantaling and cover fillets, if any, complete all as specified and diercted.
Anodised aluminium snap grid frame work for false ceiling, fixed in position complete all as specified and directed.
Non asbestos fiber cement building boards 4 mm thick fixed to aluminium frame work with screws complete all as specified and directed.
Dismantling of AC sheet (corrugated, semicorrugated etc) as in roof covering including ridges complete all as specified and directed.
Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strenght of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed.
Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strenght of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed.
6 mm thick asbestos cement corrugated or semi corrugated sheets in roof fixed with L type or J type or cranked hook bolts complete all as specified and directed.
All as srl item No. 39 here-in-before but fixing only.(using old retrieved serviceable AC sheets)
Asbestos cement 6 mm thick serrated ridges for corrugated or semi corruated AC sheets fixed with L type or J type hook complete all as specified and directed.
All as srl item No. 41 here-in-before but fixing only.(using old retrieved serviceable AC ridges).
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.50 sqm each and removing from site and making good disturbed surface of walls in cement mortar (1:3) complete all as specified & directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm & n.exc 4.00 sqm each and removing from site and making good disturbed surface of walls in cement mortar (1:3) complete all as specified & directed.
Second class hardwood plain, solid, straight chowkhat & frames, wrought, framed ribbeted on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.
Steel ventilator with top hung shutters including hinges and steel peg stay complete with glazing bars complete all as specified and directed.
Factory made steel windows with side hung shutter including projecting type hinges with steel handle and steel peg stay complete with glazing bars,dovetailed or welded complete all as specified and directed.
35 mm thick second class hardwood, factory made , plain framed ,panelled shutter with panel of 9 mm thick BWP plywood bonded with high quality phenol formal dehyde synthetic resin adhesive confirming toIS-710. the size of rails & style shall be as per IS -1003 (Part I) kiln seasoned as per IS -1141 & chemically pressure treated as per IS-401 complete all as specified & directed
Mild steel butt hinges 100 mm long medium weight cold rolled, ISI marked fixed to any type of chowkhats complete all as specified and directed.
Extruded aluminum alloy handle 150 mm long fabricated type, anodised, fixed complete all as specified and directed.
Aluminum anodised barrel tower bolt 200 mm long of extruded aluminium section, fixed complete all as specified and directed.
Aluminium sliding door bolts 300 mm long with hasp and staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section, complete.
Preparation of old surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and greasy spots etc. and applying one coat of cement paint white or tinted complete all as specified and directed.
Demolition of cement concrete unreinforced in ground floors and pavings n exc 15 cm thick (below or above ground level) complete all as specified and directed.
25 mm thick PCC 1:2:4, type B0 using 12.5 mm graded stone aggregate as in sub base of floors finished even and rough to receive the topping layer complete all as specified and directed.
Vitrified ceramic tiles 10 mm thick light shade (Square / rectangular) polished, area of each tiles not exc 0.36 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15 mm thick cement screed in CM 1:6 complete all as specified and directed.
All as srl item No. 56 here-in-before but on vertical surface laid over and including 10 mm thick rendering in CM 1:4 .
Demolition of reinforced cement concrete of any description not other wise specifically provided for complete all as specified and directed.
Reinforced cement concrete 1:1.5:3, type A1, using 20 mm graded aggreagte as in slabs supported on walls, beams and colmns in floors, roofs, landings, balconies etc complete all as specified and directed.
Use and waste of form work to soffits of suspended slabs such as roof slabs and similar work not exceeding 200 mm thick (horizontal of sloping) for flat and rough finished surfaces complete all as specified and directed.
Use and waste for formwork to edges of concrete flats, treads, breakes in floor, window cills, concrete railings, opening in concrete walls, floors and roofs exc 10 cm but n.exc. 20 cm wide wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work complete all as specified and directed.
Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
Rendering 15 mm thick on fair faces of brick or concrete surface in cement mortar 1:4, finished even and smooth without using extra cement including mixing of liquid water proofing compound @ 200 ml per 50 kgs of cement as in roof top surface when the concrete is green complete all as specified and diercted. Note: Liquid water proofing compound shall be measured and paid for separately.
Supply only liquid water proofing compound complete all as specified and directed.
Rendering 5 mm thick in CM 1:4 on brick or concrete external surfaces finished even and smooth without using extra cement complete all as specified and as directed
Cleaning surfaces and applying tack coat of industrial bitumen 85/25 at rate of 1.2 kg per Sqm complete all as specified and diercted.
Demolition of concrete (unreinforced) in ground floors, pavings and walls of any description (below or above ground level) complete all as specified and directed.
Dismantling structural steel work including doors, gates, but excluding framed truss PGI sheet etc complete all as specified and directed.
Steel rolling shutters, of 1.25 mm lath thickness without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete: push pull or manual type complete all as specified and directed.
Repair to mild steel rolling shutter including greasing, oiling, etc., including taking down, if required, area upto 20 sqm each complete all as directed.
Plain,galvanised,mild steel sheeting of 1.00 mm thickness as in ridges, hips, drip and straight flashings (length & girth as fixed) with grade of zinc coating 275 complete all as specified and directed.
PCC 1:3:6, type C2 using 40 mm graded stone aggregate, 75 mm thick, as in sub base,fair finsihed complete all as specified and directed.
PCC 1:2:4 type B2 , using 40mm grade stone aggregate, 100 mm thick, as in plinth protection surfcae finished even and smooth without using extra cement complete all as specified and directed.
Preparation of newly plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed
Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed
Preparation of old painted surfaces of steel and iron of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed
Preparation of old surfaces of walls including cornices by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and greasy spots etc, and applying one coat of white wash complete all as specified and directed
Walling of randam rubble uncoursed bedded solidly hearted built in CM 1:6
All as above item no 78.00 but except stone
Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets etc to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc complete all as specified and directed.
Taking down sheet metal enclosure DB, MCB, main switch etc and making good disturbed surfaces of wall complete all as specified and as directed.
M&L for point wiring with approved colour coding as per IS with copper conductor 1.5 Sqmm PVC FRLS/HRFR insulated unsheathed single core cable 1100 volts grade in and including PVC casing capping ISI marked, earth wire 1. 5 Sqmm PVC insulated and unsheathed multi stranded copper conductor single core of green colour as continuous earth wire connected to common earth dolly complete all as specified and as directed for the following:- One light/ceiling fan/exhaust fan point controlled by one switch or one switch and regulator complete.
All as per serial item No '3 above, but for one 3 pin 5 Amps socket outlet on the independent board with other switches, all as specified and directed.
All as per item No 3 here-in-before but for one 05 Amps socket outlet on same board with other switches complete all as specified and directed.
All as per serial item No 3 above, but with 2.5 Sqmm copper conductor (multistrand) and PVC insulated unseathed 1.5 sqmm copper conductor as earth wire for one 3 pin 15 Amps socket outlet independent, all as specified and directed.
S&F Switch piano flush button single pole one way 5 Amps all as spd and directed. Make : Anchor/Cona/SSK/Leader
S&F Switch socket combination 6 Amps SP flush type 230 volts complete all as specified and directed. Make : Anchor/Cona/SSK or eqvt
S&F switch socket combination 2 in 1 3 pin 6 Amps and 15 Amps controlled by one switch Make : Anchor/Cona/SSK or eqvt
S&F ceiling rose surface Bakelite 3 terminal of size 65x60mm. Make : Anchor/Cona/SSK or eqvt
S&F electronic dimmers, 450W, 250 V flush type in existing switch boards complete all as directed. Make : Havells or eqvt
Dismantling and taking down fluorescent tube light single/double of any wattage or size from ceiling for repairs or replacement of worn out/burn accessories complete all as specified and directed.
Re-fixing only fluorescent tube light fitting single/double of any wattage or size of false ceiling with connecting up and including provn of necessary cable/wire from existing ceiling rose to tube light fitting complete all as specified and directed.
Supply and Fix in repair surface and wall mounted LED 20W batten with aluminium housing & integrated electronic driver (with rod) complete powder coated top cover with bi-pin holders, connector block, etc. complete with all accessories internally pre-wired and connecting up with twin core twisted flexible copper conductors of suitable size complete as specified an as directed all as spd and directed. Make: Havells cat No LUMILINEPLUSBS24WLED865SPCSS or eqvt
S&F in repair LED lamp 15W LED complete all as specified and directed. Make : Havells/Bajaj or eqvt
M & L for Lamp holder PVC Polycarbonate type with cord grip cap suitable for pendant /batten fitting. Make : Havells/Bajaj or eqvt
S & F Call bell, 'Ding-dong' type, AC, 230 volts, single pole complete all as specified and as directed. Make : Havells/Bajaj or eqvt
S & F Bell push button, flush type, 5 Amps, 250 volts, AC complete all as specified and as directed. Make : Havells or Bajaj
Supply and fix in replacement sheet metal enclosure triple pole & neutral for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door complete all as directed. Make- L&T/Havells/Standard
S&F sheet metal enclosure for MCB SPN 240 volt 8 way DB with 200 Amps rated bus bar double door type complete all as specified. Make : L&T/Havells/Standard
S&F Isolator TPN 63 Amps 230 volts in existing DB complete all as specified and directed. Make : L&T/Havells/Standard Make : Havells/Standard/L&T or eqvt
S&F Isolator single pole and neutral 32 Amps 230 volts complete all as specified and directed. Make : L&T/Havells/Standard
S&F MCB SP 240 volts 5 to 32 Amps complete all as specified and directed. Make : L&T/Havells/Standard
Taking down unserviceable sub main wiring of any size complete all as specified and directed.
Sub main wiring with two single core PVC insulated cable 1100 volts grade with copper stranded FRLS conductor of size 4 Sqmm (2 single run) with one continuous FRLS copper earthing lead wire of size 2.5 Sqmm and drawn into and including concealed PVC conduit/casing capping of 25mm with all fittings/accessories, complete and as directed. Make : Havells/Pollycab or eqvt
M/S H.N.ENTERPRISES
Bhirud Electric Stores
JANARDHANANDSONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .