SPECIAL REPAIR TO BLDG NO B/TS/25, B/TS/27 AND B/TS/35 INCL CEILING, CLADDING FLOORING, TILING , CHANGE OF CGI SHEET AND COMPLETE WIRING ETC AT BAISAKHI UNDER GE 859 EWS

Amount

Dismantling of plain or corrugated steel sheeting any gauge, thickness as in roof covering complete all as specified and directed.

Supply and fix,0.50 mm thick corrugated galvanised mild steel sheeting(minimum 275gm/sqm galvanising) with two corrugations side lap, fixed with L type of J type or cranked hooks, bolts and washer in roof etc, complete all as specified and directed.

Supply and fix plain galvanised mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing of 0.63mm thickness ( length and girth as fixed) with grade of zinc coating complete all as specified and directed.

Material and labour for preparing new galvanised surfaces to receive painting by coating with mordant solution including washing and cleaning and applying two coats of anticorrosive roof paint over a coat of red oxide primer over 10 cm width or girth on steel surface,complete all as specified and directed.

Material and labour for preparation of old steel surfaces of any description, over 10cm width or girth not other wise described and applying synthetic enamel paint complete all as specified and directed.

Taking down chowkhat or frames with shutter (without taking off shutter from the frame) exc 1.50 Sqm but n exc 4.0 Sqm each including iron mongeries complete all as specified and directed.

Supply and fix 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints , complete all as specified and directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides,complete all as specified and directed.

S&F 30mm thick plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats,complete all as specified and directed.

S&F 2nd class HW 30mm thick glazed and skeleton shutters, divided into squared with plain, chamfered or rounded, mitred and rebated sash bars, any numbers open rebated and prepared to receive glass, gauze, etc (without sash bars) edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc sizes of members of shutters as specified.

Supply and fix MS butt hinges medium weight, cold rolled 100mm size complete all as specified and directed

Supply and fix aluminium anodised barrel tower bolt 150mm long of extruded section etc complete all as specified and directed

Supply and fix extruded aluminium anodised alloy handles fabricated type 150mm long complete all as speicifed and directed

Supply and fix aluminium alloy, anodised, sliding door bolts 250 mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed etc complete all as specified and directed.

Hacking out old broken glass (glass thickness, size, quality or description ) from metal frame including punching or drilling out old glazing pins/spring clips etc complete all as specified and directed.

Supply & fix sheet glass 4mm thick ordinary quality and flexing with oil putty in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed.

Demolition of cement concrete (un-reinforced ) in ground floor and paving n.exc 15cm thick (blow or above GL) including removing rubbish off the premise, complete all as specified and directed.

Material and labour for forming construction joint 30mm deep x 10mm Grade `A' wide filled with sealing compound, complete all as specified and directed.

Material and labour for 75mm thick plain cement concrete 1:3:6 type C2 (using 40mm graded crushed stone aggregate) finished even and smooth without using extra cement as in plinth protection complete all as specified and directed.

Dismantling floor, earth or wall tiling including cement mortar bedding ( but not backing)removing serviceable tiles to store and rubbish off the premised complete all as specified and directed.

M & L for 25mm thick PCC 1:2:4 type Bo(using 12.5mm graded aggregated) as in levelling course of tiles complete all as specified and directed.

M & L for screed bed or beading layer of 15mm thick in cement mortar 1:4 for laying floor tiles etc complete all as specified and directed.

M & L for Granite (of any type ) tiles 20mm thick machine cut, bedded on jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M & L for Machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Material and labour for non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement with pigment to match complete all as specified and directed.

M&L 10mm thick plastering in CM 1:6 on fair faces of brick/concrete surfaces for fixing of tiles on wall, skirting/dado complete all as specified and directed.

M &L glazed ceramic tiles 300x 200x 7 mm in duo set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles,complete all as specified and directed.

Demolition of cement concrete of any description and in any position no otherwise specifically provided for including removing rubbish off the premised, complete all as specified and directed.

Material and labour for providing cement concrete 1:3:6 type C2(using 40mm graded aggregate) in plinth wall,complete all as specified and directed.

Material and labour for formwork to side of concrete foundation, footings, based of columns , plinth beams finished the surface rough of concrete flat complete all as specified and directed

M &L for 15mm thick rendering in cement mortar (1:4) on brick or concrete surfaces finished ever & smooth without using extra cement, complete all as specified and directed.

Material and labour for three coats of white wash on plastered surfaces of walls including preparation of new surfaces complete all as specified and directed .

Material and labour for three coats of white wash on plastered surfaces of wall s including preparation of new surfaces complete as as specified and directed.

Material and labour PCC 1:3:6 type C2, (using 40 mm graded crushed stone aggregate) as in surface channels and drains finished even and smooth using with extra cement complete all as specified and directed.

Extra for forming fair finishing drain or channels, 30 cm inner girth in cement concrete using extra cement including forms, moulds stopped ends, etc complete all as specified and directed.

Dismantling wall and ceiling boards of any description including cover fillets complete all as specified and directed.

Supply and fix 6mm thick plywood, graded BWR , type BB fixed with nails to timber frame work fixed to walls etc complete all as specified and directed.

Supply and fix 4mm thick plywood, graded BWR , type BB fixed with nails to timber frame work fixed to walls etc complete all as specified and directed.

Material and labour for 2nd class hard wood plin fillets, square, rectangular or triangular in section, wrought, secured with nails having sectional area exc 3 sqcm and nexc 6 sqcm complete all as specified and directed

Material and labour for preparation of new plywood and wood based material surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for preparation of old surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint complete all a specified and directed.

Dismantling boarding of any description fixed in any position with nails complete all as specified and directed

Supply and fixed 2nd class hard boarding fixed with nails in any situation and butt joint 50mm thick as purlin and rafters etc complete all as specified and directed

Taking down point wiring carefully copper/aluminum (light , fan, socket or power) complete (fittings such as switches ceiling rose, pendants, regulator, sockets etc).

Taking down main switches, DBs along with exiting board and removing the same form the site and making good the disturb surfaces/portion of the wall etc all specified and directed by Engine in Charge.

Taking down old unserviceable/burnt Submain Wiring with copper /aluminum conductor PVC insulated cable of any size drawn through PVC Casing Caping/Conduit including GI Wire Accessories etc. and making good disturbed surfaces of Walls, Ceiling, etc. so as to match the existing Finishes, complete all as specified and as directed.

M&L for point wiring with 1.5qmm (nominal area), two single core PVC insulated unsheathed, 1100 volts grade multi stranded copper conductor in and including PVC casing capping of adequate size with all fittings and accessories including PVC board with tip cover housing/mounting brackets switches, sockets etc including PVC insulated unsheathed single core multi stranded copper conductor cable of size 1.5sqmm green in colour as earth continuity conductor connected to common earth dolly for one light/fan point controlled by one way switch complete all as specified and directed.

All as per item Ser No 47 here in before but for one 5 amp socket outlet three pin control by one switch on independent board complete all as specified and directed.

All as per item Ser No 47 here in before but for 3 pin 15 Amps socket outlet independent board drawn from DB and including PVC insulated multi stranded copper conductor 4 Sqmm 1200 volts grade on wire earth continuity wire 2.5 sqmm PVC insulated copper wire (Green) including PVC casing and capping complete all as specified and directed.

S & F switch piano flush type single pole one way 5 amp 240 volts complete all as specified and directed.

S & F for switch socket combination 2 in 1.5amps flush type 240 volts complete all as specified and directed.

S & F for switch socket combination multipurpose 15A flush type, 5 in 1,240 volts complete all as specified and directed.

S & F ceiling rose, surface Bakelite, 65 x 50mm, two to three terminals AC, 230V complete all as specified and as directed.

S & F lamp holder insulated body PVC/polycarbonate type with back plate for batten fitting with one PVC block complete all as specified and directed.

S & F 15 Watt LED lamp complete all as specified and directed. Make:-Cat Part No. LSLDDEUEML6Z010 of Make Havell’s or Equivalent make of Bajaj/Phillips.

Supply and fix LED bulk head fitting10 watt(endura Rugby) with all accessories and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed. Make:- Cat No LHEOAOP7UZ6W010 of Havells or Equivalent Make of Bajaj/Phillips.

S & F sheet metal enclosure for DBs SPN 4 way, single door with 200 amp rated bus bar fix on wall duly grouted in solid block wall or on PVC board in and including copper lugs thimble duly crimpled for connection complete all as specified and directed.

S & F sheet metal enclosure for DBs SPN 8 way, double door with 200 amp rated bus bar fix on wall duly grouted in solid block wall or on PVC board in and including copper lugs thimble duly crimped for connection complete all as specified and directed.

S & F MCB SPN 40 Amp 240 Volts complete all as specified and directed.

S & F MCB SP 6 to 20 Amp 240 Volts complete all as specified and directed.

Supply and fix regal batten for LED Tube universal batten for G 13 T8 lamps including making electric connection from Ceiling Rose to tube light fitting complete all a directed by Engr in Charge, complete all as specified and directed. Make:-Cat No.LHFYBYPNIA1W022 of Make Havell’s or Equivalent Make of Bajaj/Phillips/Crompton Greaves.

Supply and fix Photon ultra plus LED tube light 18 W (Single side connection) Ultra bright LED polycarbonate Tube light with 10% THD with very high efficiency suited for installation in existing T8 Tube light with G13 lamp holders to glee glare free light all as specified and directed by Engr in Charge. Make:-Cat Part No.LHLDCLXNUL8X018 of Make Havel’s or Equivalent Make of Bajaj Phillips/Crompton Greaves.

Supply and fix PVC rectangular block for mounting DB's with 3mm thick plastic laminated sheet cover of size 25cm x 20cm x 5 cm complete all as specified and directed.

M/L for sub main wiring along with earth wire with following size of PVC insulated copper conductor single core cable in surface/recessed in suitable size of casing and capping as required with 2 x 6.0sq.mm + 1 x 40 sq mm earth wire complete all as specified and directed by Engr -in- Charge.

Supply and fixing of Energy saving LED street light with versatile pressure die-cast aluminium IP66 roadway luminaire with high power LEDs 1 x 48 watt LED prewired complete all as specified and directed. Make - HAVELLS/BAJAJ/PHILIPS/CROMPTON GREAVES

Material & Labour for earthing complete with galvanised steel earth plate electrode 600x 600x 6mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron Earth wire protected by GI pipe 15mm bore (medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No 43 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40cm x 40cmx 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar funnel , wire mesh, 20mm dia GI pipe medium grade for altering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge.

Taking down plastered surface in cement lime or cement mortar (one side only measured in cases where both sides are plastered) all as specified and directed.

PT constuction

M/S SM ANSARI

M/S R.N ENTERPRISE

M/S DK TRADERS

D.P. Traders

M/S G JEBISOW ENTERPRISE