Roof Replacement with Galvalume Sheets of godown 1A,B and C at CW - NAINI and godown 5 at CW - JHANSI.

CENTRAL WAREHOUSING CORPORATION (A Govt. of India Undertaking)

Price Bid ( Summary Sheet)

NIT Number CWC/RO-LKO/Engg./25-26/54T

Name of Work Roof Replacement with Galvalume Sheets of godown 1A,B and C at CW - NAINI and godown 5 at CW - JHANSI.

NAME OF CONTRACTOR

Sd.-I SCH_I (CIVIL DSR)

Sd.-II Sch_II (CIVIL MR)

Grand Total (In Figures)

Grand Total (In Words)

CENTRAL WAREHOUSING CORPORATION (A Govt. of India Undertaking)

Sub-Schedule-I CIVIL DSR 2023

NIT Number CWC/RO-LKO/Engg./25-26/54T

Name of Work Roof Replacement with Galvalume Sheets of godown 1A,B and C at CW - NAINI and godown 5 at CW - JHANSI.

NAME OF CONTRACTOR

Sr.No. Name of Work Total Amount (In Rs.) Quoted rates (Above/Below/At par) Rate to be quoted in percentage(%) Quoted % In Words Quoted amount in figure

1 Sub-Schedule-I CIVIL DSR 2023 605890

TOTAL QUOTED PRICE=

Amount Quoted (In Words)

Note Total CWC estimated Cost for this schedule including labour cess & applicable GST (Rs.) ₹ 5,42,429.97

CENTRAL WAREHOUSING CORPORATION (A Govt. of India Undertaking)

Sub-Schedule -II: CIVIL NS/MR ITEMS

NIT Number CWC/RO-LKO/Engg./25-26/54T

Name of Work Roof Replacement with Galvalume Sheets of godown 1A,B and C at CW - NAINI and godown 5 at CW - JHANSI.

NAME OF CONTRACTOR

Sr.No. Name of Work Total Amount (In Rs.) Quoted rates (Above/Below/At par) Rate to be quoted in percentage(%) Quoted % In Words Quoted amount in figure

1 Sub-Schedule -II: CIVIL NS/MR ITEMS 4122309

TOTAL QUOTED PRICE=

Amount Quoted (In Words)

Note Total CWC estimated Cost for this schedule including labour cess & applicable GST (Rs.) ₹ 41,22,309.00

CENTRAL WAREHOUSING CORPORATION

(A Govt.of India Undertaking)

SCHEDULE OF QUANTITY

Name of work : Roof Replacement with Galvalume Sheets of godown 1A,B and C at CW - NAINI and godown 5 at CW - JHANSI.

Schedule A DSR 2023 based Civil Items

SLNo Description Qty Unit Rate Amount DSR-2023 No.

1 By Mechanical Transport including loading,unloading and stacking 1.1

1.1 Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. Note - Item to be applicable in urban areas having directions for restricted hours for movement/plying of load carrying motor vehicle of 3.5 cum or more. 8.08 cum 494.1 1.1.18

2 Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. 10.27

3 Providing gola 75x75 mm in cement concrete 1:2:4(1 cement :2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design : 12.21

3.1 In 75x75 mm deep chase 155 metre 47298.25 12.21.1

4 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 1580.55 sqm 25.15

5 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 13.99

5.1 One or more coats on old work 1580.55 sqm 102.8 13.99.1

6 Taking out wind ties from roof including cutting out rusted bolts, nuts etc. and removing materials to any distance within compound and stacking. 1245.04 kg 5.4

7 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 15.2

7.1 Nominal concrete 1:3:6 or richer mix (including equivalent design mix) 8.08 cum 2434.25 "₹"\ #,##0.00 15.2.1

8 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 15.7

8.1 In cement mortar 20.17 cum "₹"\ #,##0.00 15.7.4

9 Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: 15.28

9.1 Asbestos Cement sheet 3757.5499999999997 sqm 77.3 15.28.2

Modified Estimated Cost after using Correction factor on DSR 2023 on account of GST 0.973

CENTRAL WAREHOUSING CORPORATION

(A Govt.of India Undertaking)

SCHEDULE OF QUANTITY

Name of work : Roof Replacement with Galvalume Sheets of godown 1A,B and C at CW - NAINI and godown 5 at CW - JHANSI.

Schedule A MR based Civil Items

SLNo Description Qty Unit Rate Amount DSR No./MR

1 Providing and fixing of pre-painted ZINCALUME/GALVALUME roof sheet (Make : Tata Bluescope Steel/ JSW) with minimum five major corrugation, 28 to 32 mm high rib spaced at 180-220 mm c/c (in RAL 9002 colour ) and shape of profile as approved by the Engineer in charge) with subtle square fluting in the pan and the end rib shall have anti-capillary groove and return leg. The steel sheet shall be fastened with 40μm zinc coated, Hex head M6 50 mm long self-drilling screw with washer and 19 x 2.5mm stitching screw as per pattern approved by Engineer-in-charge. All screws should be sealed with PU sealant to avoid leakage in case of expansion/contraction. Coil Specifications - The base steel of sheet material shall be 0.52 mm Base Metal Thickness (BMT) substrate and 0.6 mm Total Painted Thickness (TPT), coated with hot-dipped Zincalume alloy coating (i.e. 55% Al, 43.4% Zinc, 1.6% Si) AZ150 (i.e. minimum of 150 g per Sqm Al-Zn alloy coating mass total on both sides) having yield strength of 550MPa conforms to IS15961 and factory painted and oven baked with total 35 micron paint DFT confirms to IS15965- class 3. On exposed surface of the sheet shall be having 20-micron DFT of HDCS exterior quality paint system (free from Lead and heavy metals) over 5-micron DFT corrosion inhibitive polyester primer and on reverse side of sheet shall have 5-micron DFT polyester coat over 5-micron corrosion inhibitive polyester primer. The roof’s product should be dust proof and GRIHA or IGBC GreenPro certified Product. The steel manufacturer shall provide an Environmental Product Declaration (EPD) to the Central Warehousing Corporation, ensuring transparency in the material's environmental impact. The coated steel finish shall be free from defects and shall provide branding on back side with product details such as thickness, grade, coating mass, date, mfg. name and CWC. The steel manufacturers test certificate for the chemical and mechanical properties of steel must be approved by the concerned engineer authorised by Engineer-in-charge prior to installation. Material Warranty: Manufacturer through Contractor shall provide a written warranty 20 yrs against perforation of metal roof panels due to corrosion under normal weather and atmospheric conditions and 12 yrs exterior paint film warranty against film cracking, peeling and color fading for roof and wall panels from coated steel supplier. The color panels shall not fade (Delta E) more than 6 in light color, not more than 9 in intermediate colors and not more than 12 in dark color, confirms to IS 15965:2012.Warranty shall be signed by both the metal roof system manufacturer and the contractor. Weathertightness warranty: Contractor shall provide a written weathertightness warranty for a maximum of 3 years against leaks in roof panels, arising out of or caused by ordinary wear and tear under normal weather and atmospheric conditions. 3757.5499999999997 sqm 1001.4000000000001 3762810.57 MR1

2 Providing and fixing colour coated galvalume sheets roofing accessories (Make- TATA/JSW), 0.60 mm total painted thickness (TPT) with base metal thickness and painting specification and laying/screwing specifications as that of the roof sheet material as in above item and material yield strength 550 MPa, galvalume AZ-150 GSM (both side inclusive) : Matching Profile ridge in RAL 9002. (upto 900mm) 155 metre 935.6 MR2

3 Providing and fixing colour coated galvalume sheets roofing accessories (Make- TATA/JSW), 0.60 mm total painted thickness (TPT) with base metal thickness and painting specification and laying/screwing specifications as that of the roof sheet material as in above item and material yield strength 550 MPa, galvalume AZ-150 GSM (both side inclusive) : in RAL 9002 based on the location : Edge /corner/trim Flashing/ Apron (Upto 600mm). 48.400000000000006 metre 711.95 "₹"\ #,##0.99 MR3

4 Providing and Fixing aluminium wind Tie 40x 6 mm with fasteners of 12 mm dia and 150 mm long @ 30 cm c/c 36 metre 199.14639896412882 7169.27 MR4

5 Repair / Refilling gap between roof sheet and walls with cement concrete 1:1.5:3 ( 1 cement: 1.5 Coarse sand (Zone III), 3 graded stone aggregate 20 mm nominal size) and finishing/ leveling with avg 6 mm thick cement plaster both side of mix 1:3 ( 1 cement : 3 fine sand ) to match with existing wall plaster i/c scaffolding and all lead and lift complete as per direction of Engineer -in-charge.(avg thickness of CC 50 mm) 31 sqm 78.27 MR5

6 Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 12 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 12 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. 1030.33 each 165.41 MR6

Central Warehousing Corporation (A Govt. of India Undertaking)

REGIONAL OFFICE

Pre-Qualifying (PQ) Proforma: Bidder Information Summary {To be Filled by Bidder in sheet uploaded over portal and then to be submitted along with technical bid}

ENIT NO:CWC/RO-LKO/Engg./25-26/54T

Name of Work :- Roof Replacement with Galvalume Sheets of godown 1A,B and C at CW - NAINI and godown 5 at CW - JHANSI.

Name of the Bidder *Mandatory

SL Description Details (filled by Bidder)

See PQC S/n (1) to (4): Appendix-II of NIT

1 Name of the Bidder

1.1 Bidder Address, (registered)

1.2 Bidder Organization ID /CIN in case of Company

1.3 Bidder Telephone number

1.4 Bidder E-mail address

2 Type of Bidder constituent (Organization)

(JV not allowed where estimated cost of work put on Tender is up to Rs. 30 cr)

2.1 Attested copy of documents in support of Bidder Organization Type

(See ITB-Appendix IV clause number 3.2: 1 (b): Organization Details and Appendix-II of NIT: List of documents required in support of Bidder Legal Entity.

2.2 Current List of Directors/Partners: as applicable

3 Name of the person holding the power of attorney for this Bid

3.1 Designation

3.2 Contact details of person holding the power of attorney

3.3 Attested Copy of Power of Attorney to sign & submit the Tender (as per format given in EXHIBIT-III of Appendix-II)

4 Earnest Money Deposit (EMD) of Amount as mentioned in APPENDIX-1 (TIS) through NEFT/RTGS

5.1 PF Registration code number of Bidder

5.2 COPY of PF Registration number of Bidder

6.1 GST Registration code number of Bidder

6.2 COPY of GST Registration number of Bidder

7.1 PAN of the Bidder

7.2 COPY of PAN of Bidder

8.1 Whether Enlisted /Empaneled with CPWD/ MES/ Railway/ PWD/ CWC/any other PSU etc. if any,

8.2 Copy of Enlistment/Empanelment certificate Submitted or Not

9 Whether Bidder is executing or completed any work awarded by CENTRAL WAREHOUSING CORPORATION in Past Three FY Year (FY 2022-23, FY 2023-24 & FY 2024-25) and Current FY 2025-26.

10.1 Affidavit along with this PQ Performa (EXHIBIT-I) on NJS paper signed and submitted after filling necessary details.

10.2 Declaration of near relatives (EXHIBIT-IV) submitted.

Technical Eligibility Criteria:

See PQC S/n (5) in Appendix-II of NIT for details & qualifying limits.

11 Particular Technical Experience w.r.t. Similar Nature of Work:

11.1 Brief of Similar Nature Work Experience-1

I Work order/ contract agreement ref number and date

Ii Name of client issued the work order and completion certificate

iii Completion certificate -ref number and date

iv Total value of work completed (Rs.)

V Stipulated date of completion

vi Actual date of completion

vii If LD is levied: Amount / period of delay for which Liquidity damage is levied by client (if any)

viii Copy of completion/experience certificate of work and Copy of Agreement/Workorder issued by Client is submitted as per format given in EXHIBIT-V or EXHIBIT-VI or EXHIBIT-VII as applicable

11.2 Brief of Similar Nature Work Experience-2

I Work order/ contract agreement ref number and date

Ii Name of client issued the work order and completion certificate

iii Completion certificate -ref number and date

iv Total value of work completed (Rs.)

V Stipulated date of completion

vi Actual date of completion

vii If LD is levied: Amount / period of delay for which Liquidity damage is levied by client (if any)

viii Copy of completion/experience certificate of work and Copy of Agreement/Workorder issued by Client is submitted as per format given in EXHIBIT-V or EXHIBIT-VI or EXHIBIT-VII as applicable

11.3 Brief of Similar Nature Work Experience-3

I Work order/ contract agreement ref number and date

Ii Name of client issued the work order and completion certificate

iii Completion certificate -ref number and date

iv Total value of work completed (Rs.)

V Stipulated date of completion

vi Actual date of completion

vii If LD is levied: Amount / period of delay for which Liquidity damage is levied by client (if any)

viii Copy of completion/experience certificate of work and Copy of Agreement/Workorder issued by Client is submitted as per format given in EXHIBIT-V or EXHIBIT-VI or EXHIBIT-VII as applicable

See PQC S/n (6) in Appendix-II of NIT for details & qualifying limits.

Information on Financial Capabilities & Turn over

12.1 Annual Financial Turnover-Total Revenue (Income) (as per CA certificate and audited P&L Account)

iii FY 2022 –23

iv FY 2021–22 (only when audited turnover for FY 2024-25 is not available)

12.2 The average of financial turnover for the last three financial years i.e. FY 2024-25, FY 2023-24 and FY 2022-23 Or FY 2021-22 (FY 2021-22 to be referred only when Audited turnover of FY 2024-25 is not available)

1. Tenderers have to fill complete details in Pre-Qualifying Performa (Bidder Information Summary) in sheet uploaded over tender portal.

2. Documents pertaining to the above details should be scanned and uploaded on e-tendering website at the time of on-line tender submission.

3. RTGS/NEFT E-payment Challans with UTR no. duly authenticated by Bank may also be scanned & uploaded along with tender submission.

4. Bidder must refer Tender Information Summary (TIS) in APPENDIX-I, PRE QUALIFICATION CRITERIA (PQC) in (APPENDIX-II) and Tender eligibility criteria as per ITB clause 3 (APPENDIX-IV) appended with NIT before filling this PQ Performa and Affidavit.

5. The PQ Performa EXHIBIT-I along with Its Annexure (Affidavit) enclosed with this Performa is mandatory and must be submitted by the Bidder.