Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.1 LAdmitted-Finance 55 SHALL TOKUNA JANGALNAD PULWAMA PULWAMA JAMMU KASHMIR 192301 | PULWAMA | JAMMU AND KASHMIR | 192301 | L1 | Admitted-Finance | |
| 2 | L2₹19.1 L+₹2.0 L (12.0%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | L3₹19.2 L+₹2.2 L (12.7%)Admitted-Finance | L3 | Admitted-Finance | |
| 4 | L4₹19.3 L+₹2.2 L (13.0%)Admitted-Finance | L4 | Admitted-Finance | |
| 5 | L5₹19.9 L+₹2.8 L (16.6%)Admitted-Finance | L5 | Admitted-Finance |
| Sl No | Description | Qty | Unit | IMRAN ELECTRICALS AND SUPPLIERS L5 | M/S Tioba Electrical Seadat L6 | junaid ahmad sheikh L4 | Shabir Ahmad Shah & Co L1 | M/S AL-HUDA ELECTRICALS L3 | ITOO INFRASTRUCTURE L2 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Supply, Erection, Testing and commissioning of 9.0 mtr Long GI (65 micron DFT single dip) Octogonal poles uniformally tappered with thickness of 3mm with bottom/top Dia of 175 mm x 70mm & base plate of 275x275x16mm/pcd 250 mm provided with proper door opened gear box for connections on the bottom side with G.I. Foundation Bolts (J Type) M24x750 mm long (Set of 4 no.’s per pole) ,(standard make) including providing and fixing of suitable sign board, mentioning DOS, DOC, Estimated Cost,etc. | 37 | No | 30,000 ₹11,10,000 | 26,200 ₹9,69,400 | 17,000 ₹6,29,000 Lowest | 19,000 ₹7,03,000 | 24,000 ₹8,88,000 | 22,000 ₹8,14,000 |
| 2.00 | Laying of RCC foundation for 9.0 mtr. Long Octagonal poles including proper curing. 0.6mX0.6mX1.2m (RCC with concrete ratio 1:1.5:3 with minimum 8 Nos. of 12 mm dia longitudinal MS reinforcement rods with rings of 8 mm dia not more than 200 mm C.C for fixing the pole). | 37 | Job | 5,000 ₹1,85,000 | 4,100 ₹1,51,700 | 1,900 ₹70,300 | 4,800 ₹1,77,600 | 1,500 ₹55,500 Lowest | 2,000 ₹74,000 |
| 3.00 | Supplying and fixing of Earthing of Octagonal Pole Complete by GI Pipe 40 mm or GI Rod 20mm 3 mtr long through GI Strip (25x3)mm | 37 | No | 200 ₹7,400 Lowest | 900 ₹33,300 | 850 ₹31,450 | 2,000 ₹74,000 | 500 ₹18,500 | 1,000 ₹37,000 |
| 4.00 | Providing and fixing of pre fabricated galvanised four way ring type top bracket (700mm radius with 48.3 OD Gi pipe) to be fitted on top of octogonal pole for holding of ligts. | 37 | Job | 2,500 ₹92,500 | 3,700 ₹1,36,900 | 3,300 ₹1,22,100 | 2,800 ₹1,03,600 | 2,000 ₹74,000 Lowest | 2,000 ₹74,000 Lowest |
| 5.00 | Providing and fixing of Cable Termination & Luminary connections using 4-way terminal block/ connectors & four no. of 1 amp MCB with strip (Legrand/Havells make or equivalent) including copper lugs, nuts& bolts,washers etc for poles with four way type bracket to be fitted properly inside the door opened gear box provided on the bottom side of the pole. (Complete Job) | 37 | Job | 1,000 ₹37,000 | 800 ₹29,600 | 1,500 ₹55,500 | 350 ₹12,950 Lowest | 400 ₹14,800 | 1,000 ₹37,000 |
| 6.00 | Supply ,installation ,testing and commissioning of outdoor type 100 watt LED Flood light(10000 lumens), IP66 of BAJAJ/GE/HPL/ HAVELLS/WIPRO/ PHILLIPS/ CROMPTON or any approved vendor by KPDCL make suitable for above high mast application complete with minimum (DLP) two years of onsite replacement warranty.This also includes Auto ON/OFF Day Night Sensor. | 148 | No | 3,250 ₹4,81,000 | 3,500 ₹5,18,000 | 3,500 ₹5,18,000 | 3,000 ₹4,44,000 Lowest | 4,200 ₹6,21,600 | 4,000 ₹5,92,000 |
| 7.00 | 3x1.5 sq.mm PVC insulated flexible copper wire for service connections from connection plate to the LED luminary individual circuit including loop & earthings laid properly including bunching (Havells/polycab/KEI/Anchor/Plaza make or equivalent) | 925 | Mtr | 18 ₹16,650 Lowest | 60 ₹55,500 | 150 ₹1,38,750 | 45 ₹41,625 | 80 ₹74,000 | 25 ₹23,125 |
| 8.00 | 10 mm²Cable (2C) or higher size from LT Line to meter ,1.1k V Grade, Armoured, XLPE FRLS type to be carried through conduit/pipe U/G or A/G only in case of site constrains excluding cost of pipe & trench excavation. The cable shall include end termination lugs with its crimping /taping. (Havels/polycab or equivalent make) | 925 | Mtr | 20 ₹18,500 Lowest | 150 ₹1,38,750 | 150 ₹1,38,750 | 130 ₹1,20,250 | 150 ₹1,38,750 | 100 ₹92,500 |
| 9.00 | Providing and fixng of Single Phase Energy Meter 5-30 Amp along with Polypropylene weather proof outdoor type Meter Box with Zinc plated clamps | 37 | No | 1,000 ₹37,000 | 1,300 ₹48,100 | 2,000 ₹74,000 | 130 ₹4,810 Lowest | 300 ₹11,100 | 1,500 ₹55,500 |
| 10.00 | Provinding and fixing of Miscellaneous items like Alumunium cable thimbles/lugs at termination points, insulation tape , binding wire, screws, etc as required for commissioning of the HM lights. | 37 | Job | 10 ₹370 Lowest | 400 ₹14,800 | 50 ₹1,850 | 119.5 ₹4,421.5 | 500 ₹18,500 | 1,000 ₹37,000 |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
7 Feb 2026, 1:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE ENGINEER ED KUGLAM
EXECUTIVE ENGINEER ED KUGLAM
Installation of High Mass Lights in DH Pora Constituency under MPLADS
2026_PDD_300996_1
EDK/e-tender/61 of 2025-26
Open Tender
Electrical Works
Turn-key
60 days
DH Pora
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,000
EXECUTIVE ENGINEER ED KUGLAM
₹50,000
10 Feb 2026
20 Jan 2026
9 Feb 2026
20 Jan 2026
7 Feb 2026
20 Jan 2026
20 Jan 2026 - 28 Jan 2026
Supply, Erection, Testing and commissioning of 9.0 mtr Long GI (65 micron DFT single dip) Octogonal poles uniformally tappered with thickness of 3mm with bottom/top Dia of 175 mm x 70mm & base plate of 275x275x16mm/pcd 250 mm provided with proper door opened gear box for connections on the bottom side with G.I. Foundation Bolts (J Type) M24x750 mm long (Set of 4 no.’s per pole) ,(standard make) including providing and fixing of suitable sign board, mentioning DOS, DOC, Estimated Cost,etc.
Laying of RCC foundation for 9.0 mtr. Long Octagonal poles including proper curing. 0.6mX0.6mX1.2m (RCC with concrete ratio 1:1.5:3 with minimum 8 Nos. of 12 mm dia longitudinal MS reinforcement rods with rings of 8 mm dia not more than 200 mm C.C for fixing the pole).
Supplying and fixing of Earthing of Octagonal Pole Complete by GI Pipe 40 mm or GI Rod 20mm 3 mtr long through GI Strip (25x3)mm
Providing and fixing of pre fabricated galvanised four way ring type top bracket (700mm radius with 48.3 OD Gi pipe) to be fitted on top of octogonal pole for holding of ligts.
Providing and fixing of Cable Termination & Luminary connections using 4-way terminal block/ connectors & four no. of 1 amp MCB with strip (Legrand/Havells make or equivalent) including copper lugs, nuts& bolts,washers etc for poles with four way type bracket to be fitted properly inside the door opened gear box provided on the bottom side of the pole. (Complete Job)
Supply ,installation ,testing and commissioning of outdoor type 100 watt LED Flood light(10000 lumens), IP66 of BAJAJ/GE/HPL/ HAVELLS/WIPRO/ PHILLIPS/ CROMPTON or any approved vendor by KPDCL make suitable for above high mast application complete with minimum (DLP) two years of onsite replacement warranty.This also includes Auto ON/OFF Day Night Sensor.
3x1.5 sq.mm PVC insulated flexible copper wire for service connections from connection plate to the LED luminary individual circuit including loop & earthings laid properly including bunching (Havells/polycab/KEI/Anchor/Plaza make or equivalent)
10 mm²Cable (2C) or higher size from LT Line to meter ,1.1k V Grade, Armoured, XLPE FRLS type to be carried through conduit/pipe U/G or A/G only in case of site constrains excluding cost of pipe & trench excavation. The cable shall include end termination lugs with its crimping /taping. (Havels/polycab or equivalent make)
Providing and fixng of Single Phase Energy Meter 5-30 Amp along with Polypropylene weather proof outdoor type Meter Box with Zinc plated clamps
Provinding and fixing of Miscellaneous items like Alumunium cable thimbles/lugs at termination points, insulation tape , binding wire, screws, etc as required for commissioning of the HM lights.
Providing and fixing of Surge Protector for the 100 Watt LED type lighting fixture complete.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.18 MB
BOQ_976583.xls
BOQ • 0.34 MB
FOUNDATIONDRAWINGS.pdf
Other Document • 0.37 MB
SBD.pdf
Tender Documents • 0.93 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .