PROVN OF PCC/INTERLOCKING TILED HARD STANDING NEAR SUB GUARD ROOM GATE AND OTHER VARIOUS PLACES AND PROVN OF INTERNAL BOUNDARY WALL WITH RCC JAFRI TOP OF 5 FT HIGH AT CERTAIN LOCATIONS AND PROVN OF BALCONY GRILL FOR L/IN OFFICERS AT AF STN SALUA

Excavating in trenches in hard dense soil , n exc 1.5 m wide and n. exc. 1.5 m in depth; for foundation,(for manholes,sewage line etc) . and getting out complete all as specified and as directed.

Returning, filling in, including spreading ,leveling, watering and well ramming in layers n. exc 25 cm with soil out side MD land complete all as specified and as directed.

Removal of excavated material (soil) to a distance n. exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed in soil

M&L PCC in foundations, filling and mass-concrete type D2 (1:4:8) using 40 mm graded stone aggregate

M&L for RCC M-25 (Desigh mix) (20mm graded stone aggregate) for foundation including rafts, footings, foundation beams, plinth beams, bases for columns, etc, all as specified and directed.

M&L for RCC M-25 (Design mix) (20mm graded aggregate) for columns, pillars, pierrs, posts & struts etc all as specified and directed.

M&L for RCC Design Mix M-25 (20mm graded aggregate) for beams cantilevers bressumers, lintels over 1.5m span etc all as specified and directed.

M&L flat form work to sides of concrete foundations, footing bases of columns, raft and raft beams, sides and soffits(if any) of foundation and plinth beams and similar work, veritical or to batter all as specified & all as directed.

M&L form work to sides of pillars posts, struts piers, columns & stanchions square rectangular or polygonal rough finished surfaces in shape all as specified & as directed.

M&L Old size brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 Complete.

M&L for rendering 15 mm thick in cement mortar (1:4) on other than fair faces of brick or concrete surfaces (5mm thick CM 1:4 with WPC setting coat and 10mm thick CM 1:4 backing coat), finished even & smooth without using extra cement all as specified and directed by Engineer-in-Charge. Note :- WPC measured and paid separetely.

Supply only integral water proofing compound

M&L applying two coats cement base paint on wall including preparing new plastered surface over alkali resistant primer complete all as specified and directed.

S & F mild steel TMT bar 10mm dia and over cut to length, bent to shape required incl. cranking, bending spirally for hoping ends and binding with and incl. mild steel wire (annealled ) not less than 0.9 mm dia or securing with clip quality conforming to TMT bars. complete all as spfd

M&L for mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for colomns hocking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips quality conforming to complete all as specified.

Providing precast cement concrete louvres and Jafri jallies, 40mm thick (mea sured solid), including all mould- ings but excluding frame Type B0 1:2:4 (12.5mm graded agg) set in cement morter 1:4 complete.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings,grills; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165

M&L applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome

Surface dressing n exc 15 cm deep in soft loose soil

M&L 100mm thick Cement concrete Nominal mix type D-2, 1:4:8 (40mm graded aggregate) as in sub base complete

M&L for 80mm thick machine pressed precast concrete interloking paver block with grey cement and pigment any shape and size confirming to IS -15658-2006 of M-35 grade with gray cement and pigment laid over sand cussion complete all as specified (ISI Marked duely emposed on tile)

M&L Sand filling under floors or in foundations including watering and consolidation

M&L Providing and laying Factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with ent mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

M&L cement concrete 1:2:4 type Bo (12.5mm graded stone aggregate) as sides in kerbs complete