REPAIR MAINT OF WOODEN PVC AND STEEL JOINERIES CUPBOARDS ROLLING SHUTTERS MS GATES AND CERTAIN PETTY WORKS IN MADAMBAKKAM CAMP AT AFS TAMBARAM

Amount

Taking down wooden frames with shutters without taking of shutters from the frame of area not exceeding 1.5 Sq.M each complete all as specified and directed by Engineer-in-Charge.

All as per item No.1 above but exc 1.5 Sq.M and n.exc 4 Sq.M complete all as specified and directed by Engineer-in-Charge.

Taking down shutters only n.exc 1 Sq.M and removing the same from site for depositing to store/ handing over to contractor on account of Schedule of credit complete all as specified and directed by Engineer-in-Charge.

Taking down shutters only exc 1 Sqm but n.exc. 2 sqm and removing the same from site to store for depositing to store/ handing over to contractor on account of Schedule of credit complete all as specified and directed by Engineer-in-Charge.

Refixing of shutters in same opening, of any descriptions n.exc 1 Sq.M each obtained from dismantling under item no 1 above complete all as specified and directed by Engineer-in-Charge.

Refixing of shutters in same opening, of any descriptions exc 1 sqm but.n.exc 2 Sqm each obtained from dismantling under item no 2 above complete all as specified and directed by Engineer-in-Charge.

M&L for repairs to old steel window af any description having area not exc 1.00 sqm including replacement of unserviceable hinges, handle,beading and necessary fitting/welding to shutter and frames for making window serviceable condition and one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. Note:- Glass panes and wire mesh shall be measured and paid seperately.

M&L for repairs to old steel window af any description having area exc 1.00 sqm and not exc 2.00 sqm including replacement of unserviceable hinges, handle,beading and necessary fitting/welding to shutter and frames for making window serviceable condition and one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. Note:- Glass panes and wire mesh shall be measured and paid seperately.

Reapirs to old steel window af any description having area exc 2.00 sqm and n exc 4.00 sqm including replacement of unserviceable hinges, handle,beading and necessary fitting/welding to shutter and frames for making window serviceable condition and one coat of synthetic enamel paint complete all as specified and directed. Note:- Glass panes and wire mesh shall be measured and paid seperately.

Resecuring or easing & adjusting without taking down of shutters of any description area not exc. 1sqm each complete all as specified and directed by Engineer-in-Charge.

Resecuring or easing & adjusting without taking down of shutters of any description area exc. 1sqm and not.exc 2sqm each each complete all as specified and directed by Engineer-in-Charge.

Resecuring or easing & adjusting with taking down of shutters of any description and refixing in the same opening of area not exc. 1sqm each complete all as specified and directed by Engineer-in-Charge.

Resecuring or easing & adjusting with taking down of shutters of any description and refixing in the same opening of area exc. 1sqm and not.exc 2sqm each each complete all as specified and directed by Engineer-in-Charge.

S&F second class hardwood plain solid straight chowkat and frames wrought framed,rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed by Engineer-in-Charge.

S/F flush shutters 35 mm thick solid core construction with particle board core and 3mm thick BWP Ply wood face panels, commercial type on both sides with 6mm thick hard wood lipping complete all as specified and directed by Engineer-in-Charge. Note : lipping work shall be measured and paid separetely.

S&F First class hard wood of 35mm x 6mm thick lipping to flush shutters complete all as specified and directed by Engineer-in-Charge.

S&F flush shutter 25 mm thick Solid core construction with Block board and plywood face pannels, commercial type on both sides complete all as specified and directed by Engineer-in-Charge.

s&f 35 mm thick Second class hard wood factory made plain, framed, panelled shutters (any number of panels), with panels of veneered particle board or plywood or bison board as directed by Engineer-in-Charge ,supplied and fixed to chowkats complete all as specified and directed by Engineer-in-Charge.

S&F Second class hardwood skeleton door shutters 35mm thick open rebated and prepared to receive glass / gauge etc without sash bars divided in to squares with plain chamfered or with cut and beads for securing glass /gauge etc complete all as specified and directed by Engineer-in-Charge.

All as per item no 19 above but window shutter with sash bars of 30mm thick complete all as specified and directed by Engineer-in-Charge.

S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printd PVC sheet reinforced with MS Square tube supply and fixing as specification and drawing complete all as specified and directed by Engineer-in-Charge.

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet s for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling ofwood grain printed PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 5mm thick & 15 mm wide PVC sheet beading unsed inside stiles and rails and decorative PVC beading of 10mm x 10mm (90 degree), and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engineer-in-Charge.

S&F MS hold fast 25x3mm conforming to Fe-410-0 and similar articles complete all as specified and directed by Engineer-in-Charge.

M&L for treating small articles such as hold fast using tar or coal tar,black paint area n.exc 0.10 sqm each complete all as specified and directed by Engineer-in-Charge.

M&L for preparing surfaces of wood and wood based materials and treating back of chowkets area exc 0.1 sqm and n.exc 0.5 sqm each using tar or coal tar / black bituminous paint complete all as specified and directed by Engineer-in-Charge.

S&F Mild Steel butt hinges medium weight 100mm long to wooden/steel frame complete all as specified and directed by Engineer-in-Charge.

All as per item no 26 above but 100 mm long in repairs complete all as specified and directed by Engineer-in-Charge.

All as per item no 26 above but 75 mm long complete all as specified and directed by Engineer-in-Charge.

All as per item no 26 above but 75 mm long as in repairs complete all as specified and directed by Engineer-in-Charge.

All as per item no 26 above but 50 mm long complete all as specified and directed by Engineer-in-Charge.

All as per item no 26 above but 50 mm long as in repairs complete all as specified and directed by Engineer-in-Charge.

S&F 100 mm hasp and staple MS safety stove enamelled black incl bolt to hinge plate and fixed with screws complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 100 mm hasp and staple MS safety stove enamelled black incl bolt to hinge plate and fixed with screws complete all as specified and directed by Engineer-in-Charge.

S&F of Mild Steel mortice lock 4 levers 100mm size vertical type complete all as specified and directed by Engineer-in-Charge. Make:- Godrej or other equivalent as approved by G.E

S&F in repairs Mild Steel mortice lock 4 levers 100mm size vertical type complete all as specified and directed by Engineer-in-Charge. Make:- Godrej or other equivalent as approved by G.E

S&F Mild Steel sliding door bolt plate type stove enamelled black with bright bolt 12 mm dia and 300mm long including 6 Nos of bolt & Nuts complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Mild Steel sliding door bolt plate type stove enamelled black with bright bolt 12mm dia and 300mm long including 6 Nos of bolt & Nuts complete all as specified and directed by Engineer-in-Charge.

S&F Aluminium alloy anodised barrel tower bolts of extruded section 200 mm long and fixed complete all as specified and directed by Engineer-in-Charge.

All as per item no.38 above but in repairs complete all as specified and directed by Engineer-in-Charge.

All as per item no.38 above but 150mm long complete all as specified and directed by Engineer-in-Charge.

All as per item no.38 above but 150mm long as in repairs complete all as specified and directed by Engineer-in-Charge.

All as per item no.38 above but 100 mm long complete all as specified and directed by Engineer-in-Charge.

All as per item no.38 above but 100 mm long as in repairs complete all as specified and directed by Engineer-in-Charge.

S&F Aluminium alloy anodised handle cast type 150mm complete all as specified and directed by Engineer-in-Charge.

All as per item no 44 above but in repairs complete all as specified and directed by Engineer-in-Charge.

All as per item no 44 above but size 100mm complete all as specified and directed by Engineer-in-Charge.

All as per item no 44 above but size 100mm as in repairs complete all as specified and directed by Engineer-in-Charge.

S&F Aluminium plate type II gate and shutters hook & eye 200 mm long complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Aluminium plate type II gate and shutters hook & eye 200 mm long fixed complete all as specified and directed by Engineer-in-Charge.

S&F Ist class hard wood small fittings (door stopper) such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, incl all necessary labours; articles n.exc 200 cu.cm each complete all as specified and directed by Engineer-in-Charge.

S&F Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring 150mm long complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring 150mm long complete all as specified and directed by Engineer-in-Charge.

Hacking out old broken glass of any qualtity / any thickness from steel / wooden doors, windows,ventilators of any size glazed with putty or fixed with beads with 3mm thick, sheet glass, ordinary quality in squares n.exc 0.50sqm in each pane complete all as specified and directed by Engineer-in-Charge.

S&F 3mm thick figured glass, pin head type and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed by Engineer-in-Charge.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm fixed to any window/door shutters using stainless steel wire staples/wooden beads etc complete all as specified and directed by Engineer-in-Charge.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm fixed to any window/door shutters using stainless steel wire staples/wooden beads etc complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge.

M&L for cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required. depth of embedded portion of holdfasts or lugs easured from the face of the jamb into the wall not exc half brick complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster of any discription incl jamps) in CM incl raking out joints hacking for key scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

M&L Rendering 15mm thick (Jambs plaster)on brick work or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of plastered surfaces of wall and applying two coats of Oil bound distemper on walls over a coat of primer complete all as specified and directed by Engineer-in-Charge.

M&L for mild steel frame work such as grills, gates, gratings etc with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars confirming to Fe 290 Gde-E-165 with good finish to the existing surfaces, including dismantling of wrought iron complete all as specified and directed by Engineer-in-Charge.

S&F in repair 200mm size mild steel ordinary rat & tail rod pattern spring (Helical) including roller & roller plate complete all as specified and directed by Engineer-in-Charge.

Dismantling of mild steel grills not exc 0.5sqm and refixing in the same opening complete all as specified and directed by Engineer-in-Charge.

S&F in repair 20-25 mm bore stainless steel, single curtain rod (walls thickness not less than 1mm) including fancy type both sides brackets, finials etc (as per sample) suitable for single curtain rod complete all as specified and directed by Engineer-in-Charge.

Taking down steel rolling shutters pull and push type not exceeding 15 Sqm of clear opening each incl hood cover and cleaning the sides of shutters, suspension shaft and guide channels and greasing al the moving parts of rolling shutters and straining of rolling shaft, tightening and re-fixing the same including hood cover complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying 2 coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed by Engineer-in-Charge.

M& L Post constructional Antitermite treatment, along external wall below concrete or masonary apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in apron complete all as specified and directed by Engineer-in-Charge.

M & L Post constructional Antitermite treatment for ground floor qtrs, area exc 500 sqft and not exc 700 sqft (a) soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors (b) At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre / hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same. (c) along external wall below concrete or masonary apron using chemical emulsion @ 2.25 litres per linear metre incl drilling and plugging holes etc in apron (d) All switch boards and other seen afffected area complete all as specified and directed by Engr in Charge.

M & L Post constructional Antitermite treatment for above, other than ground floor qtrs, area exc 500 sqft and not exc 700 sqft (a) along internal wall using chemical emulsion @ 0.30 litres per linear metre incl drilling and plugging holes etc in apron (b) At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre / hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same. (d) All switch boards and other seen afffected area complete all as specified and directed by Engr in Charge.

S&F in repair Door seal with rubber lining strip of 90mm wide ( as per sample) for arresting gap between door and floor surface fitted with anti rust screws complete all as specified and directed by Engineer-in-Charge.

Supply and fixing factory made uPVC white colour Three track three panels sliding window (horizondal/vertical) with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. Note : (i) Glass and wiremesh shall be measured and paid separately. (ii) For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment shall be made on this account.

S & F sheet glass of ordinary quality 5.5 mm thick and glazing complete with beads fixed with screws in aluminium shutter square n. exc 0.5sqm in each pane complete all as specified and directed by Engineer-in-Charge.

S & F Figured glass, pin head type, 5 mm thick and glazing complete with beads fixed with screws in aluminium shutter square n. exc 0.5sqm in each pane complete all as specified and directed by Engineer-in-Charge.

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples, including fixing in Aluminium side hund window shutters complete all as specified and directed by Engineer-in-Charge.

Supply and fix Powder coated aluminium grills (Pattern DG-102 with weight, not less than 3.131 Kg/sqm) for windows, ventilators, etc., including joining cleats etc complete all as specified and directed by Engineer-in-Charge.

S& F in repair factory made both side pre laminated 18mm thick lead free 100% solid WPC(wood polymer composit) sheet for cupboard shutter having high natural fiber contant 25 to 30 % wood colour sheet with density not less than 600 kg /Cum and WPC to be laminated with PVC foil of min 14 micron thick of approved design incl 100% termite/water proof, fire rertradent, Eco friendly, and finish at all edges at level for making edges lipping using binding tape etc as in Kitchen cupboard,Cabinet etc as per Manufacturer's instruction complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No 78 but one side decorative laminated and other side wood nature colour complete all as specified and directed by Engineer-in-Charge.

S&F stainless steel handle(fancy type) of size 150 mm and fixed complete all as specified and directed by Engineer-in-Charge.

S & F in repair continous (piano) hinges mild steel, 40mm width of flaps (when open) , bright finish or electro galvanised in repair complete all as specified and directed by Engineer-in-Charge.

S&F in repair Magnetic catcher approved by GE, fixed with nuts and bolts complete all as specifed and directed complete all as specified and directed by Engineer-in-Charge.

S&F in repair Zinc finished telescopic drawer channel 18 inch long, ball bearing slide for kitchen cabinets and wardrobe complete all as specified and directed by Engineer-in-Charge.

S&F in repair chromium plated SS wire basket (AISI 304 grade ) Non magenatic multilayer feuba nickel chorme plated for multipurpose utensils container with (storage basket) pull out type for utensils size 480x500x150mm of grade 304 with necessary fixing clips etc complete all as specified and directed by Engineer-in-Charge.

S&F in repair chromium plated SS wire basket (AISI 304 grade ) Non magenatic multilayer feuba nickel chorme plated for multipurpose utensils container with (cup and saucers basket) storage basket pull out type for utensils size 380x500x150mm of grade 304 with necessary fixing clips etc complete all as specified and directed by Engineer-in-Charge.

S&F in repair chromium plated SS wire basket (AISI 304 grade ) Non magenatic multilayer feuba nickel chorme plated for multipurpose utensils container with (Plate Basket) pull out type for utensils size 380x500x150mm of grade 304 with necessary fixing clips etc complete all as specified and directed by Engineer-in-Charge.

S&F in repair chromium plated SS wire basket (AISI 304 grade ) Non magenatic multilayer feuba nickel chorme plated for multipurpose utensils container with (cutlery basket) out type for utensils size 380x500x100mm of grade 304 with necessary fixing clips etc complete all as specified and directed by Engineer-in-Charge.

S&F in repair chromium plated SS wire basket (AISI 304 grade ) Non magenatic multilayer feuba nickel chorme plated for multipurpose utensils container with (Grain trolly Basket) pull out type for utensils size 380x500x150mm of grade 304 with necessary fixing clips etc complete all as specified and directed by Engineer-in-Charge.

S&F in repair chromium plated SS wire basket (AISI 304 grade ) Non magenatic multilayer feuba nickel chorme plated for multipurpose utensils container with (Bottle pulll out basket) out type for utensils size 380x500x100mm of grade 304 with necessary fixing clips etc complete all as specified and directed by Engineer-in-Charge.

RAVI ENTERPRISE (BID ID -3383905)

Varsa Constructions (BID ID -3383747)

Vinayaga steel industries (BID ID -3388751)