SPECIAL REPAIR TO BLDG NO T 56 CAMP OFFICE AT HQ INF BDE AT BG UNDER GE 881 EWS

Amount

B/R SCHEDULE

Taking down chowkhats or frame with shutter without taking off shutter from the frame not exceeding 1.50 sqm but n.exc 4.0 sqm each & removing from site complete all as specified and directed.

Taking down chowkhats or frame with shutter without taking off shutter from the frame exc 1.50 sqm but n.exc 4.0 sqm each & removing from site complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specifiedand directed.

Dismantling of wall and ceiling boards any thickness of any description including cover fillets complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering comple all as specified and as directed.

Dismantling framed timber scantling exceeding 40 sqcm otherwise provided for complete all as specified and as directed.

Framed timber scantling second class hard wood clean sawn fixed as in framed work complete all as specified and as directed.

Brick work with old size bricks with sub class 'B' brick straight of curved on plan exceeding 6 meter mean radius built in cement mortar 1:4 complete all as specifeid and as directed.

Stone masonary walling of random rubble, uncoursed, well bounded, bedded and solidly hearted, brought upto course built in CM 1:6 complete all as specified and directed.

All same as srl item No 10.00 here-in-before but except stone.

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

Rendering 15 mm thick on stone masonary surfaces or surfaces other than fair face of brick work in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Preparation of new plastered wall surface & applying two coat of cement based paintover a coat of white wash on wall complete all as specified and directed.

Preparation of new plastered wall surface & applying two coat of distemper oil emulsion white or tined over chalk whitning on wall complete all as specified and directed.

Pressed steel door frame of size 125 x 60 mm for door with one or more rebates including necessary fixing lugs, hinges locks strike plate etc complete all as specified and directed.

35 mm thick second class hardwood factory made plain, framed pannelled shutters (any numbers of panels ) with pannels of timber flat on both side ( feathered edges), or of veneered particle board medium density, wood particle board with commercial face veneers kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F in position suspended false ceiling using E- grid suspended ceiling grid system of grid size 600x600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross Tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24mm x 3mm using 4mm thick high pressure stream cured classic variant E-board, designer pattern (ISI marked, IS No 14862-2000) fibre cement E board to be placed in the grid suspended by 4mm GI wire hangers from the purlins of the roof with butter fly clips including preparation of surfaces and appling two coats of synthetic enamel paint over one coat of primer complete all as specified and directed. Make : Everest/Visaka or equivalent make as approved.

Structural steel as in roof trusses (framed), purlins, rails and heavy bracket frame (beam, tee, angle, channel or flat section) including distence pecies, cleats etc Gde Fe-290 grade E-165 complete all as specified and as directed..

RCC design mix (M-30) as in slab supported on walls/columns in floor roofs landings balconies, canopies, deck slab and like complete all as specified and directed

TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

TMT bars 5 mm dia and upto 10 mm , as in stirrups binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Form work to sides of concrete foundations, footings, bases of columns, beams complete all as specified and directed.

100 mm thick PCC 1:2:4 type B-2 (using 40 mm graded crushed stone aggregate) as in floor etc finished even and smooth using extra cement complete all as specified and directed.

50mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection and path including finishing surface even & smooth without using extra cement complete all as specified and directed.

Chequered cement concrete tiles 30 cm x 30cm x 25mm thick, machine pressed; set jointed in neat cement slurry and pointed with grey cement and pigment, as in floor/path, over and including 20 mm thick in screed bed in CM 1:4, complete all as specified and directed.

Non Skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm in floors etc over 15 mm screed bed in CM 1:4 set and joined in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

Glazed ceramic coloured tiles of size 450 mm x 350 mm x 7 mm thick as in vertical surfaces, set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tile over and including 10 mm thick cement screed in cement mortar 1:4 complete all as specified and directed. Shade/Colour of tile shall be approved by the GE.

Factory made Solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube 19X19 mm complete all as specified and as directed.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent coment for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail abd bottom rail : panelling of plain colour pvc sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed.

Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with and including nut and bolts or wooden fillets to steel, wooden, aluminium windows/ventilator and wooden doors etc complete all as specified and directed.

Box type Steel window/ventilator factory made, double shutter i.e. glazed & gauzed shutters , with Box steel section used in outer frame, shutter frame and centre frame of 16 gauge ERW section, Z section handles welded with openable frame including non friction hinges to shutters, two tower bolt to each leaf welded on 3mm thick steel piece and guard bar/grill all as per details shown in drawing No CE / TD-1302/09 sheet No 1/3 to 3/3 revised up to 02-06-12 complete all as specified and directed.

4 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc. 0.5 sqm in each pane, complete all as specified and directed.

MS Butt hinges medium weight of size 100 mm colled rolled complete all as specified and as directed.

Aluminium handle cast type anodised 100 mm long complete all as specified and as directed.

Aluminium handle cast type anodised 150 mm long complete all as specified and as directed.

Aluminium handle barrel tower bolt 200 mm long complete all as specified and as directed.

300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified

Preparation of wood and wood based materials new surface of any description and girth 10cm wide other wise described applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Two coat of synthetic enamel paint over one coat of red oxide, zinc crome primer on new steel surfaces including preparation of surface complete all as specified and directed.

Supply and fix in repair Wash basins, Vitreous China (flat back or angle back type) of size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand including waste pipe of 32/400 mm as specified and directed.

Supply and fix in repair, Vitreous china wash down water closet pan (Pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe) but including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel CP or aluminised hinging device complete all as specified and directed.

Supply and fix in repair, Vitreous china bowl urinal flat back, white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed..

Supply and fix in repair, sheet glass assembley consisting of 5.5 mm thick sheet glass shelf 12 cm wide with aluminium alloy brackets and guard rail 60 cm long complete all as specified and directed.

PVC waste pipe with union, flexible suitable for wash hand basin or urinal, 32 mm dia complete all as specified and directed..

PVC connection 15 mm bore with PTMT nuts of length 450 mm long complete all as specified and directed.

Supply & fixed in repair, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle (incl brackets & flush pipe PVC 32 mm dia) capacity of 10 Litres complete all as specified and as directed.

Chromuim plated fancy type tubular towel rail 20 mm dia, 'D' type 60 cm long between flanges complete all as specified and as directed..

Brass CP jet spray with complete assembley suitable for EWC padestal pattern complete all as specified and as directed.

Supply and fix in repair stainless steel sink, 1.0 mm thick for kitchen or lab, with plug, waste pipe, washers including cantilever cast iron brackets, connecting union etc 495X420mm with bowl size 410X330X160 mm complete all as specified and as directed.

Bib tap 15mm bore cast copper alloy, with crutch or butterfly handle screwed down screwed for iron pipe but fency type with chromium plated complete all as specified and directed.

Stop valve 15mm bore dia, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe but fancy type chomium plated complete all as specified and directed.

Supply and fix in repair, Pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly nuts screwed for 15 mm dia bore of pipe complete all as specified and directed. .

Grating doom 125 mm dia with waste hole of PTMT (minimum weight - 40 gms) complete all as specified and directed.

Supply and fix in repair 20mm dia drapery curtain rod decorated with fixing brackets, stops, corners, etc complete all as specified and directed.

PVC water tank of capacity 500 ltr rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, including 15 mm float valve including dismantling of tank complete all as specified

Pre polished granite of any type 20 mm thick machine cut as in platform laid over 20 mm thick screed bed and and pointed with white cement and admixture of pigment to match the shade of granite stone complete all as specified.

Taking up or down steel tubing 15 mm bore and connections, including cleaning for re-fixing complete all as specified and directed..

GI tubing 15 mm bore medium grade with all fittings fixed to walls, ceiling or laid in floors complete all as specified.

M S framed work such as grills, gratings etc with ends of bars shouldered or riveted or forged into spikes framed guard bars and similar work conforming to Fe 260 Gde E-165 complete all as specified.

E/M SCHEDULE

Taking down carefully aluminum/copper point wiring (light fan socket or power) complete and making good disturbed surfaces of walls, floor to match with existing specification complete and all as specified keeping aside serviceable items for reuse with in the same bldg and removing U/S items from site.

Point wiring with Single core PVC (FRLS) insulated, unsheathed, stranderd copper conductor of size 1.5 sqmm including earth lead of 1.5 sqmm with same specification drawing in & including PVC non metalic rigid casing & caping/conduit with MS/CI sunken box of wall thickness not less than 1.6 mm including plastic laminated sheet of 3 mm thick for mounting switch, socket and regulators for one light point/fan point controlled by one switch & making good the disturbed surfaces to match with the existing specification complete all as specified & as directed.

All as per item No. 66.00 here in before but for socket outlet 5 Amps on independent board complete all as specified & as directed.

All as per item No. 66.00 here in before but for socket out 5 Amps on same board complete all as specified & as directed.

All as per item No. 66.00 here in before but wiring with 2.5 sqmm & earth lead of 1.5 sqmm with same specification for socket out 5/15 or 6/16 Amps complete all as specified & as directed.

Switch piano flush type single pole one way 6 amps 240 volts all as specified & as directed.

Switch piano flush type single pole one way 16 amps 240 volts all as specified & as directed.

Socket outlet 3 and 5 pin, 6 amps 5 pin, flush type, 230 volts all as specified & as directed.

Socket outlet, 2 in 1, 6 pin, 6 and 16 amps, flush type, 230 volts all as specified & as directed.

Ceiling rose 3 phase/PVC/polycarbonate isolated body surface bakelite 2 to 3 terminals all as specified & as directed.

Angle Lamp holder insulated body with back plate for batten fittings and including one 15 Watt LED Bulb non dimmable B-22 cool daylight all as specified and direccted.

LED Tube light fitting, 1x 20 watts, T8 230 V ( poer factor not less than 0.90) box type, CRCA body, bipin holders connector block etc complete with all acessories internaly prewired, including LED lamp T8 20 W with aluminium heat shrink and connecting up with PVC insulated and sheathed flexible copper conductor cable of size 1.0 sqmm 3 core all as required at site or directed.

Earthing complete with galvanised cast iron earth plate electrode of size 600x600x6mm thick as earth electrode with top edge of the earth plate not less than 1.5mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the erth plate, including earth work in any type of soil remaing surplus excavated material all as required at site and specified in Electrical plate No 5 of SSR part I 2009 or directed by Engineer-in-charge.

Sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 12 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification . (Note:- MCBs will be measured separately.) Make:- Legrand Cat Pt No 607711 or equivalent in Havells/L&T/C&S

MCB single pole, 240 volts any rating from 6 to 32 amps, with rupturing capacity 10 KA, including providing thimble for out going cables.

MCB single pole & neutral 240 volts any rating from 6 to 32 amps, with rupturing capacity 10 KA, including providing thimble for out going cables.

Taking down existing ceiling/exhaust fan any type and capacity with due care and refixing after servicing and painting including connecting electrically using PVC insulated overall sheathed flexible copper conductor cable 0.75sqmm all as required and directed.

Electronic fan regulator , step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically all as required or directed.

Service cable of size 16 Sqmm 2 core 1100 volts grade heavy duty cable PVC insulated stranded alumn conductor, served with an inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm suspension wire or drawn in and including medium grade non metallic rigid PVC conduit as per site requirement, flat or circular all as required or directed.

House Service bracket (hook type) complete with 3.0 mm long G.I pipe 40 mm dia (medium grade), two numbers 90° bends, M.S hook and stay including taking down the existing unserviceable bracket. NOTE :- The unit rate shall be deemed to include for :-(a) Cutting holes in walls etc. of any description, grouting rag bolts and making good with cement mortor 1:3 including making good finishing to match the existing work and removing rubbish off the premises as directed (in case of bracket being fixed to masonry wall).

LED security light made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP65 protection and Impact resistance of IK07 and electronic driver of 25W LED 5700K and making necessary connections including street light bracket made out of 25 mm dia GI tubing medium grade made to shape 1.6 mtr long incl duly painted with synthetic aluminium paint over a coat of primer incl MS clamps and back plates fabricated from steel section including nuts, bolts, washers 02 set complete as directed complete all as specified and directed.

Note:- The contract sum shall be arrived after deduction of amount of Sch of credit as listed in tender Documents.

M/S BHATT TRADERS

M/S Farooq Ahmed Bhat

M/S RAHUL GUPTA

M/S Jyoti Parkash Tilak Raj Gupta

M/S KIRAN CONSTRUCTIONS