PROVN OF GUARD ROOM AND SPECIAL REPAIR TO MOTOR CONTROL PANEL UNDER GE SAUGOR

Amount

Surface excavation not exc 30cm deep & averaging 15cm deep and getting out in soft / loose soil complete all as specified and directed.

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m deep in soft/loose soil and getting out complete all as specified and directed

Excavation in trenches not exc 1.5 m wide and exc 1.5 m but not exc 3 m deep in soft/loose soil and getting out complete all as specified.

Excavating over areas exc 1.5m but not exc 3.0m deep & getting out in soft / loose soil complete all as specified and directed

Excavating over areas not exc 1.5m deep & getting out in soft / loose soil complete all as specified and directed

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled & rammed including watering complete all as specified and directed.

Removing excavated materials (soil) to a distance not exc. 150 m and deposting where directed at a level notexc. 1.5m above the starting point complete all as specified and directed

Returning filling in incl spreading, levelling, watering and well ramming in layers not exc 25cm thick complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregates) as in foundation filling and mass concrete complete all as specified and directed

M&L for damp proof course to horizontal or vertical surfaces in cement concrete 1:2:4, type B-0 (using 12.5mm graded stone aggregtaes), 40 mm thick mixed with WPC including necessary formwork complete all as specified and directed. Note:-WPC shall be measured and paid separately

M&L for hardcore of broken stone/boulders gauge n exc. 63mm, deposited, spread & levelled in layers not exc. 15 cm thick, watered & rammed to a true surface complete all as specified and directed

M&L for 75mm thick PCC type C-2, (1:3:6) using 20mm graded stone aggregates as in plinth protection surface finished even and smooth without using extra cement complete all as specified and directed

M&L for PCC type C- 2, 1:3:6 (using 40mm graded stone aggregates) 100mm thickness in floor complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block glossy finished, chemically treated any shape and size confirming to IS-15658-2006 size of 60 mm thickness, M-35 Grade with grey cement and pigment laid over and including 30 to 50 mm stone dust cushioning complete all as specified and directed

M&L for providing reinforced cement concrete(design mix) M-25 using 20 mm graded stone aggregate for foundation including rafts, footings, foundation beams, plinth beams and bases for columns complete all as specified and as directed.

M&L for providing reinforced cement concrete (design mix) M-25, using 20mm graded mechanically crushed stone aggregates as in columns, pillars, piers, post and struts complete all as specified and as directed.

M&L for providing reinforced cement concrete (design mix) M-25, using 20mm graded mechanically crushed stone aggregates as in beams/ lintels over 1.5m span complete all as specified and as directed.

M&L for providing reinforced cement concrete (design mix) M-25, using 20mm graded mechanically crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc... complete all as specified.

M&L for providing reinforced cement concrete (design mix) M-25, using 20mm graded mechanically crushed stone aggregates in chajjas complete all as specified and as directed.

M&L for mild steel "TMT" bars 10mm dia and over in reinforcement, cut to length, bent to shape required including crnaking, bending sprially for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with chips complete all as specified and as directed..

M&L for mild steel TMT bars 6mm to 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and as directed..

All as per Srl item No.21 above but for 5mm dia and over upto 10 mm dia and including 10mm dia in stirrups, spacers and binders.

M&L for form work to sides & soffits of plinth beam and sides of footings getting rough finished surfaces of concrete complete all as specified and as directed..

M&L for form work to sides of columns getting rough finished surfaces of concrete complete all as specified and as directed..

M&L for formwork to sides & soffits of floor or roof beams, beam , lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. fair finished surfaces of concrete flat complete all as specified and as directed..

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; exc. 200m thick (Horizontal or sloping) fair finished surfaces of concrete flat complete all as specified and as directed..

M&L for formwork to chullah hoods, chajjas, troughs & similar items including edges fair finished surfaces of concrete flat complete all as specified and as directed...

M&L for brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed..

M&L for brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and as directed...

M&L for rendering 10mm thick on fair face of brickwork in CM (1:6) finished even& smooth without using extra cement complete all as specified and as directed..

M&L for rendering 5mm thick on fair faces of concrete surfaces in CM (1:3) in ceiling complete all as specified and as directed..

M&L for rendering 10mm thick on fair faces of roof concrete surfaces in CM (1:4) finished even & smooth with water proofing compound complete all as specified and as directed..Note:-WPC will be paid separetly under respective Item

M&L for two coat cement plaster ,first coat 10mm thick CM 1:6 and second coat cement plaster 5mm thick in CM 1:4 with WPC finished even and smooth without using extra cement complete all as specified and as directed.. Note:-WPC will be paid seperately under respective item

Supplying only integral waterproofing compound complete all as specified and as directed..

M&L for applying two coats exterior weather coat ( ACE paint or equivalent) over one coat of exterior primer including preparation of surfaces of new walls etc complete all as specified and directed Make:- Asian ACE or equivalent make as approved by GE

M&L for 25mm thick PCC type B-0, (1:2:4) using 12.5 mm graded stone aggregates complete all as specified and as directed..

M&L for non skid ceramic coloured tiles 8 to 10 mm thick (Square/rectrangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38sqm, in floors laid over and including 15 mm thick cement screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and as directed...

All as per Srl item No. 37 above but in dado / skirting laid over and including 10mm thick rendering in CM (1:4).

M&L for coloured non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed in CM(1:4) complete all as specified and as directed..

M&L for coloured Glazed ceramic tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick plaster in CM(1:4) complete all as specified and as directed...

S&F GI tubing `medium grade' with all fitting & fixed complete to walls & ceilings or laid in floors of 15mm bore complete all as specified and as directed.

S&F GI tubing `medium grade' with all fitting & fixed complete to walls & ceilings or laid in floors of 20mm bore complete all as specified and as directed..

S&F chromium plated bib taps 15 mm bore, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule fancy type complete all as specified and as directed...

S&F stop valves/angle valve 15 mm bore fancy type, chromium plated with long shank & cup (conncelaed type), cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed...

S&F brass CP shower rose 125mm size long body fancy type complete all as specified and as directed...

S&F Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and as directed..

S&F Ball brass valves 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed...

S&F CP Pillar taps 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe complete all as specified and as directed..

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layered wall construction hoisted & fixed in position complete all as specified and as directed..

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed...

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed..

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls fixed with and including mild steel clamps stack clamps made out of 50mm x 5mm flat iron & 16mm dia round iron stays including bolts & nuts & securing ends of stays complete all as specified and as directed..

S&F PVC (SWR) vent cowl 110mm dia complete all as specified and as directed..

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia complete all as specified and as directed...

S&F PVC (SWR) gully trap 125/110 mm, setting & jointing with solvent cement complete all as specified and as directed...

S&F PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement complete all as specified and as directed...

S&F Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. 32 mm bore complete all as specified and as directed..

S&F aluminium anodised tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and as directed..

S&F vitreous China 580x440 mm,"ORISSA PATTERN" with 'P' or 'S' trap size squatting pan (excluding flushing cistern and flush pipe) incl foot rest ccomplete all as specified and as directed..

S&F vitreous China wash basin, white flat back, size 550x400 with pedestal,including 32mm waste coupling & all fittings and suitable fastanours complete all as specified and directed.

S&F PVC valveless, syphonic action type, flushing cistern 10 litr capacity, low level, white, with intel, ball valve, float , handle and flush pipe 32mm bore,and brackets complete all as specified and as directed..

M&L for reinforced concrete pipes 150mm dia ,class NP2 ,laid and jointed complete with socket and spigot joint and sealed complete all as specified and as directed..

M&L for reinforced concrete pipes 200mm dia ,class NP2 ,laid and jointed complete with socket and spigot joint and sealed complete all as specified and as directed..

M&L for plain cement concrete bed 1:3:6, type C2 (using 40mm graded stone aggregates) for NP2 150mm bore, bedding and hanching completely after pipes are laid, jointed and tested complete all as specified and as directed..

M&L for plain cement concrete bed 1:3:6, type C2 (using 40mm graded stone aggregates) for NP2 200mm bore, bedding and hanching completely after pipes are laid, jointed and tested complete all as specified and as directed..

M&L for cutting chases, pinning in, in brick/ stone wall making good to facings where required and pointing in cement mortar 1:3 or P. C. C 1:2:4 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring insert sheet in wall. etc. and making good, cutting not exceeding 10cm girth complete all as specified and directed.

M&L for construction of septic tank for 10 users, in any type of soil , foundation in PCC 1:2:4 , brickwork in CM 1:4 , RCC Slab (M-25 design mix) cover including plate embeded all arround / fibre reinforced cover with angle iron frame vent shafts and sludge chambers etc complete all as specified, directed and shown on Drgs

M&L for construction of soakage well excavation in any type of soil, foundation PCC 1:3:6 wells of honey combed and solid in M-25 design mix concrete, including intercepting chamber screen chamber brick work in CM RCC cover slab in M-25 filling with brick bat complete of size 2.40 mtr dia and 3.00 mtr deep complete all as specified, directed and shown on Drgs

S&F Solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with prelam sheet) reinforced with MS square tube complete all as specified and as directed..

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 4mm thick moulded PVC sheet prelam on the front face & 4mm prelam PVC sheet on back face complete all as specified and as directed..

S&F aluminium anodised barrel tower bolts of extruded section, length of bolt in 150 mm complete all as specified and as directed..

S&F Aluminium handles 150mm size, cast type, anodised complete all as specified and as directed..

S&F 100mm Butt hinges, extruded aluminium aloy with galvanised mild steel hinge pin, anodised and fixed (for PVC Door) complete all as specified and as directed..

S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed..

S&F pressed steel frames of size 105mmx60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including filling the hollow portion of frames with PCC 1:3:6, type C0 (using 12.5mm graded stone aggregates) complete all as specified and as directed..

S&F 35 mm thick Flush shutters, solid core construction, with particle board core & plywood face panels, commercial type on both sides complete all as specified and as directed..

S&F mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed, length of bolt 200 mm complete all as specified and as directed...

S&F mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, Length of bolt 300 mm . complete all as specified and directed.

S&F Mild steel pressed handles, oval type, stove enamelled black, size of handle 125 mm complete all as specified and as directed..

S&F Butt hinges of 100 mm size, Medium weight, cold rolled mild steel complete all as specified and as directed..

S&F fixed type ventilators aluminium powder coated of frame size 50.80X 25.40mm,1.5 mm thick half portion will be fixed with 4mm thick frusted glass and half portion will be fixed with louvers with 4mm thick frusted glass with rubber gasket and aluminium beading ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as directed by Engr-in- Charge (Al. section thickness 1.50 mm }

S&F for Winpire 3 track pre painted steel sliding window 3-track, 2glass panel and 1 mesh panel ,sliding window fabricated from roll formed section made of galvanized steel colour coated/powder coated (base steel as per IS 513 D quality galvanized as per IS 277 with Zinc of 120gm/sqm ) with total coated thickness of 0.58mm primer coat with epoxy primer of 5-7 micron thick ,finish painted with a polyester paint of 12-16 micron thick and back coated with alkyd backer of 5-7 micron or powder coated with pure polyester up to 50-60 micron thick. section for external frame should be off 107X44 mm, section of shutter should be of 35 x 49 mm. section of mesh should be 35 x 49 mm . the window should be paneled with 5mm thick plain flot glass and stainless steel wire cloth with 0.36mm nominal dia of wire and average width of aperture 1.18mm. Corner bracket for internal and external frame made of glass filled nylon. Gaskets are to be made of Ethyl Propylene Diamine Monomer (EPDM) . The sections are to be cut to length, join and assembled by mean of corner bracket . The above frames should be fixed to the concrete/ masonary wall by means of self expanding screws. all as specified and directed by Engr-in-Charge (Make: NCL ALLTEK & SECCOLOR LTD or equivalent make as approved by GE)

S&F framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and as directed...

M&L for precast reinforced cement concrete type B1 (1:2:4) using 20 mm graded aggregate set in CM(1:4) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and as directed.. .

M&L for PCC in surface channels and drains type B1 (1:2:4) (using 20 mm graded stone aggregates) complete all as specified and as directed..

M&L for cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregates) as in coping ,benching in man holes, etc complete all as specified and as directed..

M&L for preparation of new steel surfaces and applying two coats of synthetic enamelled paint over a coat of red oxide primer over exc 10 cm width or girth complete all as specified and as directed...

M&L for preparation of new wooden surfaces and applying two coats of synthetic enamelled paint over a coat of pink primer over exc 10 cm width or girth complete all as specified and as directed...

M&L for applying three coats of white wash on new ceiling surface including preparation of surface complete all as specified and as directed....

M&L for applying two coats of synthetic emulsion distemper, white or tinted over a coat of wall primer and applying Birla / J. K. wall care white putty 2mm thick for levelling the surfaces on new wall surface including preparation of surface complete all as specified and as directed....

S&F vitreous China bowl urinal angle back of size 430 x 370 x 340mm (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe ) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws and waste pipe, and fixing automatic flushing cistern with brackets complete all as specified and as directed....

M&L for provn of water proffing roof treatment to RCC roof with approved modified membrane of weighing not less than 3 kg/sqm comprising with following items complete all as specified and as directed:-

The surface of roof,parpet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brushing and dusting. For cast iron drain outlets a groove shall be cut as specified and directed.

Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kgs per sqm to be applied on prepared surface till the surface is properly impregnated.

Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm

Laying of water proofing teratment of weight not less than 3 Kg / sqm APP modified polymeric water proofing membrane composed of 100 micron (+10% ) high density polyethylene sheet ( HMHDPE) as center core, which is standwiched between high quality polymeric bitumen mix having softening , high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps 75 mm and 100 mm as per manufacture instruction etc.

Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm over the membrane

Applying aluminium paint in two coat @ 100 gm/sqm in each coat on finished membrane surfaces complete all as specified and directed at site .

M&L for concealed point wiring for one light, fan point controlled by one switch with 1.5 Sqmm PVC(FR) insulated, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC rigid conduit medium grade of size not less than 20 mm dia ISI marked ivory white with all accessories such as tee, bend, joint cover etc/square PVC Top blocks at junction for batten holders, ceiling rose etc screws, gutti/roul plugs PVC all as per site requirement including MS sunken boxes made out of ms sheet and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase-Red, Neutral-Black and Earth-Green complete all as specified and directed

All as per Srl item No.95 above but for one 5Amp independent socket point controlled by one switch

All as per Srl item No.95 above but for one 3 pin ,5 Amp socket point with other switch on the same board

All as per Srl item No.95 above but for power point wiring using with 2.5 sqmm PVC (FR) insulated , unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead complete all as specified and colour coding of cables such as Phase-Red, Neutral-Black and Earth-Green.

S&F switch piano type flush, single pole, one way, 5 Amp 230 Volt complete all as specified and directed

S&F socket outlet , 5 pin, 5 Amp flush, 230 Volt complete all as specified and directed

S&F switch piano type flush, single pole, one way,15 Amp 230 Volt complete all as specified and directed

S&F socket outlet 2 in 1, 6 pin, 5/15 Amp , flush type universal shuttered 230 Volt complete all as specified and directed

S&F ceiling rose, surface backlit, 63.5x48 mm three terminal complete all as specified and directed

S&F lamp holder pvc insulated with back plate suitable for Angle/Batten fitting with 9 Watt LED bulb complete all as specified and directed

S&F electronic double space rotary step type 5 speed regulator 120- 280 V complete all as specified and directed

S&F testing and commissioning of MCB SP 6-32 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed

All as per Srl item No.106 but SPN 32- 63 Amps, 240 V

S&F sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar incl of suitable size complete all as specified and directed

S&F TL fitting 20 /18 watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient complete all as specified and directed. Make:- Havells Cat Part No LHEXBLP7PN1W020, 4 feet or eqvt in Bajaj cat part No BCLSB 20 WH/ CG Cat par No LCTC-18-CDL

S&F LED Bulk head designed for modern homes availave in PIR as well as non PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installer complete all as specified and directed. Make:- Havells cat part no LHEXCGP7UN5W013 or eqvt in BAJAJ cat part no BIBWP10WLED /CG cat part no LBHE-10-CDL.

S& F box type LED optic fitting 1x9 Watt 2 feet box type complete all as specified and directed . Make:- Havells Cat Part No LHEXBLP7IN1W009 or eqvt in Bajaj cat part No BCLSB10WH/ CG Cat par No LCTL-9-CDL.

S&F electric water heater (Geyser) ISI marked 25 Ltrs capacity AC 230V, 5 star rating Branded heavy duty automatic cutoff and including electric connection lead of suitable size and length and all accessories, grouting of nut bolt/fastner on wall and making good disturbed surface complete all as specified and directed. Make - Racold/Usha/Havells

S&F exhaust fans AC single phase 230/ 240 V of size 300 mm sweep mettalic body . complete all as specified and directed. Make:- Havells TURBOJET/Bajaj MAXX AIR/Crompton EXHD300-6-1.

Supplying and laying cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 16 sqmm 2 core all as specified and directed.

S&F ceiling fan 1200 mm sweep metallic white colour with electronic step type regulator, single phase connect with ceiling rose with suitable wire complete all as specified and directed. Make:- Havells ES-50/Crompton HS Plus/Bajaj Electra 50.

M&L for provn of earthing complete with MS galvanized earth plate electrode 600x600x6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below normal GL) with top edge of plate not less than 1.5 M below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of CI or steel incl excavation, PCC (1:3:6) type C-1 chamber with CI cover 10 mm thick, 15 mm dia light grade , GI protection pipe, funnel with wire mesh, watering pipe of size 20 mm dia, medium grade, lugs, main earthing lead upto main switch/DB incl charcoal dust, salt etc all as shown in electrical plate No. 3 of SSR part-I 12009 specification complete all as specified and directed.

Dismantling existing 3 Phase LT Panel board with ACB from the existing position including Taking up complete LT Panel board with Copper bus bar 3 Phase & Neutral using Tools / Plants / Crane etc from the existing locations including disconnection of earthing lead etc complete and making good the distrubed duct / floor/wall surfaces to match with the existing adjacent surfaces complete all as specified and directed

Supplying, installing, testing and commissioning of self supporting totally enclosed mounted on Base channel of size 75 mm x 75 mm and thickness not less than 3 mm Indoor type LT Panel from CPRI Approved Panel builder factory fabricated made out of not less than 2 mm thick CRCA sheet ,dust and vermin proof, hinged smoothly openable front and rear, with neoprene rubber gasket, epoxy powder coated including danger plate, earth strip (32 x 6 mm) connecting provosion - 02 Nos, ventilation louvers, bottom detachable gland plate complete with suitable size zinc chromium plated nuts, bolts and washers etc panel board suitable for 3 phase 4 wire ,415 volts 50 hz, panel size shall be (including base channel height) not less than size 2200mm(height) X 1000mm(width) X 800mm(deapth) near ACB Enclosure and not less than size 2200mm(height)X 3000mm(width) X 350 mm(deapth) near outgoing feeders enclosure including panel board comprising of the following items and connecting all outgoing feeders cables using new suitable lugs by taking down cables from temporary arranged panel complete consisting of the following :-

Incoming (a) ACB rating 800 Amps, 415 Volts, 4P, 50 KA - 01 No

Outgoing (a) MCCB with micro processor, based trip unit, 3 P, 415 Volts, 400 Amps, 35 KA - 04 Nos (b) MCCB with micro processor, based trip unit, 3 P, 415 Volts, 250 Amps, 35 KA - 01 No (c) MCCB with micro processor, based trip unit, 3 P, 415 Volts, 63 Amps, 35 KA - 02 Nos (d) Resin cast current Transformer 250A/5A - 18 Nos (e) Resin cast current Transformer 100A/5A - 6 Nos (f) Combined multi functional Digital Meter - 7 Nos (g) LED Phase indication lamp for RYB - 24 Nos - 21 Nos (h) Aluminium Bus Bar of 1250 Amp rating 75 x 10 @ 50 KA Three Phase and nutural (j) MCB 40 Amps 4 pole - 02 Nos (h) Including internal wiring with multi stranded copper FRLS cable for panel with insulators, sleeves, bus bar supports, SMC finger/conical supports for vertical & horizontal bus bars, fasteners, bolts, nuts for vertical and horizontal bar connections, inter connection bus bar, incoming & out going bus bar, panel accessories bus bar sleeves, hylem shoulders for incoming & out going, door gasket, panel designation lables, tinning of copper bus bar, lugs, ferrules for metering/indication encls, heater/thermostats, panel light 16A swiitch socket comination with box etc

M&L in replacement of synthetic insulating mat of size 2m x 1m x 12 mm complete all as specified & directed.

M&L for cutting exisitng GI tubing for alterations including screwing existing tube of 40mm/50mm bore for new connection including all necessary clamps, fittings etc complete all as specified and as directed

S&F earth continuty conductor or main earthing lead fixed to wall on batten or recess chases or buried in ground or drawn in conduit /pipe or fixed to poles or any other loop earthing etc.., as required 25X4mm galvanised iron strip complete all as specified and as directed

M/S AJAY JAIN

M/s Mohan Singh