REPAIR TO B/R WORKS IN AIR CONDITIONING MES INSTALLATION, REPAIR/ MAINT OF PERIMETER LIGHT AND B/R MISC WORKS OF TRAINING DITCH AT AF STN BKT

Amount

Demolition of brick work built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed

M&L brick work built in cement mortar (1:4) using sub class 'B' old size bricks straight or curved on plan exc 6 mtr mean radius as in drains/manholes etc complete all as specified and directed

Taking down cement plaster from brick walls/ stone walls etc. of any description including raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:6) on brick wall or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thcik rendering on other than fair faces of brick work in cement mortar (1:4) and finished even and smooth without using extra cement complete all as specified and directed

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed. Make : Berger Durocem extra/ Asian Paints/ Decora/ Nerolac

M&L for applying two coats of oil bound distemper over a coat of primer on walls including preparation of new plastered surface complete all as specified and directed. Make : Asian paint tractor synthetic distemper/ Nerolac beauty smooth finish/ berger beauty clean

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed.

M&L PCC (1:2:4) type B-2, using 40mm graded stone aggregate Nominal mix in pavement/ hardstanding, having thickness of concrete not less than 150mm.

M&L for 75mm thick PCC (1:4:8) type D-2, 40mm graded stone aggregate as in sub base for flooring complete all as specified and directed.

M&L for Duracrete Chequred tiles glossy finished of size 300mm x 300mm x 20mm thick, heavy duty tiles ; laid over and including 25 mm thick PCC (1:2:4) Type B1 using 20mm graded stone aggregate over and including 15 mm thick screed bed in cement mortar (1:6) set jointed and pointed in neat cement slurry with white/grey cement mixed with admixture or pigment to match the shade in floors cut and polished complete all as specified and directed.

Dismantling of floor hearth and wall tilling incl mortar beding removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for dark shed any design and pattern double charged Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with existing surface over & including 20mm thick sceed bed in CM (1:6) complete all as specified and directed, (Make:- M/s Somany/Orient Bell/Johnson or equivalent as approved by GE in writing).

Ditto all as per item No 13 above but on vertical surface, over & including 10mm thick sceed bed in CM (1:4) complete all as specified and directed.

M & L for glazed ceramic joint free coloured designer tiles of size 450mm x 300mm x 7mm / 600mm x 300mm x 7mm thick, in vertical surfaces , set and joiunted in neat cement slurry and pointed in coloured cement to match over and including 10mm thick screed bed in cement mortar (1:4) complete all as specified and directed. (Make:- M/s Somany/Orient Bell/Johnson or equivalent as approved by GE in writing).

M & L for coloured non-skid/anti skid ceramic jointless tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not. Exc. 0.18 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM (1:6) complete all as specified and directed. (Make:- M/s Somany/Orient Bell/Johnson or equivalent as approved by GE in writing).

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed

S&F Pre-painted galvalume aluminium zinc coating GI bases corrugatede steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /clading to fixed with self tapping screw complete all as specified and directed

S&F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S&F Rolled Mild Steel sections confirming to Fe 410 - S as in main and cross beam, hip and jack rafters, purlins, wind tie where connected to common rafters fixed with angle cleats or other connecting plates complete all as specified and directed

M&L for preparing new steel or iron surfaces of any description, exc 10cm in width or girth and two coats of synthetic enamel Paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old painted steel surface of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

Taking up or down steel tubing and connections, 15mm bore and removing from site complete all as specified and directed.

Taking up or down steel tubing and connections, 20mm bore and removing from site complete all as specified and directed.

S&F 20 mm nominal outer dia Chlorinated Polyvinyl Chloride (CPVC) pipes SDR 11, having thermal stability for hot & cold water supply, including all Plain CPVC SDR 11 fittings & brass threaded fittings on walls/ceiling or laying in floors,including fixing the pipe with clamps. This includes jointing of pipes & fittings with one step CPVC solvent cement complete all as specified and directed

S&F 25 mm nominal outer dia Chlorinated Polyvinyl Chloride (CPVC) pipes SDR 11, having thermal stability for hot & cold water supply, including all Plain CPVC SDR 11 fittings & brass threaded fittings on walls/ceiling or laying in floors,including fixing the pipe with clamps. This includes jointing of pipes & fittings with one step CPVC solvent cement, complete all as specified and directed

M&L for Anti-skid rectified Mosaic head proof, water proof and UV stabilised tiles (Joint free, Pool tiles) of size 200mm x 200mm x 4 mm thick over High performance epoxy Grout as per manufacture's instruction and pointed in white or coloured epoxy Grout to match the existing floor complete all as specified and directed. Make:- Kajaria/ Somani Pearl Code No RM-2010 or Equivalent as approved by GE in writing.

Ditto all as per item No 27 above but on wall surfaces over High performance epoxy Grout as per manufactures instruction and pointed in white or coloured epoxy Grout complete all as specified and directed.

S&F for vitrified ceramic light shade tiles Chequered finished 10mm thick (square/rectangular) polished , area of each tiles not. exc 0.36 sqm each on floors etc. set and jointed in cement slurry and pointed in white cement with pigment to match the colour of tiles over and including 15mm thick screed bed in (1:6) CM complete all as specified and directed.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering,steel ladder, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channeles, Plates etc, incl welding, grinding, buffing, polishinig and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts, including fixing the railing with necessary accessories and stainless steel dash fastener,of required size, on the top of floor or side of waist slab, work such as grills, complete all as specified and directed.

M&Lfor Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment also fastening and fixing complete all as specified and directed.

Carring out petty repairs to security light system complaint attending street light/flood light/highmast light/ perimeter lights in technical and domestic area including TRU on daily basis with suitable tools and machinary checking u/S cable complete circuit/lights, rectifying defects and replacement of unserviceable parts including insulation tap, minor wires cable for internal connection , lugs etc, tightening of junction box in pole from 0900 to 2000 hrs complete all as specified and directed. Notes :- (i) All safety tools shall be provided to electrician. (ii) Addequte Electrician with helper should be well qualified and experienced. (iii) Ladder/ convence any cycles shall be provided to employed person. (iv) NO android phone shall be permitted inside Technical area. (v) Excavation, taking out cable, relaying of cable shall be paid seperately under respective of items. (vi) The required spare parts will be measured and paid seperately

Supply only street light bracket, clamps, nuts and bolt made out of 32 mm dia light grade GI pipe (length of pipe should not be less than 1.2 mtrs) , two set of clamp made out of 25 mm x 3 mm flat iron, nuts & bolts as required , bend to shape and fixing arrangement complete all as specified and directed.

Supply only Street light fitting with new generation energy saving environemental friendly long life LED street light made up of pressure die cast aluminium housing with lens, energy efficient high quality consistency, glare control with toughned glass and individual high power LEDs with secondary optics ,IP66 protection and impact of capacity 60 Watt complete all as specified and directed. Make:- Philips/Jaguar/Syska

Supply only flood light fitting with new generation energy saving environement friendly long life exclusive innovative die cast aluminium IP66 LED flood light with high power LEDs as light source of capacity 50 Watt complete all as specified and directed. Make:- Philips/Jaguar/Syska

Supply only flood light fitting with new generation energy saving environement friendly long life exclusive innovative die cast aluminium IP66 LED flood light with high power LEDs as light source of capacity 120 Watt complete all as specified and directed. Make:- Philips/Jaguar/Syska

Supply only flood light fitting with new generation energy saving environement friendly long life exclusive innovative die cast aluminium IP66 LED flood light with high power LEDs as light source of capacity 250 Watt complete all as specified and directed. Make:- Philips/Jaguar/Syska

Supply only LED light driver suitable for LED Street light fitting of capacityup to 90 Watt complete all as specified and directed. Make :- Philips/Jaguar/Syska

Supply only LED light driver suitable for LED Flood light fitting of capacity upto 250 watt complete all as specified and directed. Make :- Philips/Jaguar/Syska

Supply only cable junction box with new pole mounted thermoplastic cable junction box for steet light 4.5 module with IP-65 protection, halogen free and weather proof with metric knockouts for cable entry for outdoor installation of approx size 126 mm x 288mm x 111 mm with front door opening system including terminals for one incoming and two outgoing cables of size 16/25 sqmm 4 core, one MCB SP 3 to 6 Amp 240V AC with mounting clamp of flat iron, nut, bolt and washers complete all as specified and directed . Make of junction box - Syntex / Havells/ Legrand

Supply only MCB 4 pole 100 Amps, 240 Volts 50 HZ, 10 KA breaking capacity, 'C' curve complete all as directed. Make:- L&T/ABB

Supply only Power contactor with new power contactor 3 pole AC, with 415 volt coil, 40 Amp rating complete all as specified and directed. Make- L&T/ABB

Supply only aviation light fitting with integral LED aviation light comprising of aluminium housing with polycarbonate enclosure capacity 20 Watt complete all as specified and directed. Make: Philips/Havells/Syska/Bajaj

Taking out unserviceable LT cable of any size from trenches/duct etc carefully including bricks and keeping in safe custody either for relaying or disposal complete all as specified & directed

Supply, laying jointing and testing 16 Sqmm 4 core XLPE insulated LT under ground cable, 1100 volts grade heavy duty, armoured with multi stranded aluminium conductor laid in trenches/ ducts pipes or on poles etc complete all as specified and as directed. Make - Havells/Polycab/Finolex/ Plaza

Supply, laying jointing and testing 25 Sqmm 4 core XLPE insulated LT under ground cable, 1100 volts grade heavy duty, armoured with multi stranded aluminium conductor laid in trenches/ ducts pipes or on poles etc complete all as specified and as directed Make - Havells/Polycab/Finolex/ Plaza/ RR Cable

Re- laying , passing through pipe , connecting and testing UG cable XLPE insulated ,armoured heavy duty electric cable with aluminium conductor ,1100 volts grade (Note:- Excavation , Earth Work pipe etc will be measured and paid sepretaly under respective items of Sch 'A' given here-in-after) XLPE Cable of size 16 Sqmm complete all as specified and directed.

Excavation in trenches in soft/loose soil , not.exc 1.5 mtr wide and not.exc 1.5 mtr deep and getting out in soft/loose soil for laying of cable/foundation of pole and stay etc complete all as sepecified and directed.

Returning filling in, soil including spreading, levelling, watering and well ramming in layers not .exc 25 cm complete all as specified and directed.

Removing surplus excavated materials not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above ground level from starting point complete all as specified and directed.

M&L for sand cushioning in trenches for protection of LT under ground cable including watering and consolidation complete all as specified and directed. (Note:- punned thickness shall be measured only for payment purpose)

Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat of size 250mm x 150mm x 40mm complete all as specified and directed.

M & L for boring of holes under road, pavement, hard standing by trenchless boring manually or by machine for insertion of GI pipe of size upto 40 mm dia complete all as specified and directed.

S&F GI pipe 40 mm light grade with all fitting fixed to electric pole and laid in road crossing for cable protection with suitable size clamp, nut bolt and washers complete all as specified and directed. Make : Tata/Jindal/swastik/ Prince

S & F in repair service connection 1100 volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tap and over all PVC sheathed of size 2.5 Sqmm 2 core complete all as specified and directed. Make :-Palza/Polycab/Havells/Finolex/ RR Cable

M&L for painting of existing LT/HT pole upto 9 / 11 meter height with two coat of aluminium paint complete including preparation of old painted surfaces and including making blue / black colour paint strip of 15 cm width including writing the Pole No complete all as specified and directed.

Supply and fixing Photonic Astronomical timer switches (Having Latitude and Longitude at the installed location of Indian cities in memory) 150V to 260V AC, 50 HZ single phase of 15000 watts rating with dual mode operation (Asronomical timer/Real time clock) , location accuracy + 1 degree, clock accuracy + 1 second and provided to delay "Switch ON" Lights after sunset PFF offset provided to early "Switch OFF" lights before sunrise time, RTC mode input ON and OFF time clock based with on delay 0-99 seconds user adjustable and dual relay can be individually programmed with control MCB and auto/manual switch, 4 pole contactor complete with steel encosure duly painted and fixing MS clamps for mounted on pole all as specified & directed. Make ; L&T/ABB/ Seimens/ Legrand or equivalant as approved by GE in writing.

S&F XLPE insulated sheathed(heavy duty) armoured aluminium conductor cable of size 6.0 Sqmm, 2 core for connection drawing through pole or GI brackets of street light fittings with junction box complete all as specified and directed. Make : Plaza/Finolex/Havells/Polycab/ RR Cable

M&L in XLPE insulated sheathed(heavy duty) armoured aluminium conductor cable of size 10 Sqmm, 2 core for connection drawing through pole or GI brackets of street light fittings with junction box complete all as specified and directed. Make : Plaza/Finolex/Havells/Polycab/ RR Cable

M&L for heat shrinkable jointing kit of 1.1 KV grade 25 Sqmm to 50 Sqmm x 3.5 core XLPE cable including suitable size of connector including necessary excavation and earth work , labour, Jointing kit complete, fixing charges & T&P including removing of grass/shrubs nearby the fault location complete all as specified and directed. MAKE:- M-seal/ Raychem/ CAB Seal/ Denson.

Detection of pin point fault in LT cable (burried in ground/under road/path up to depth of 1.5 m) by cable fault locating machine comprising impulse generator,acoustic fault locator and reflectometer (laptop based) complete all as specified and directed. Notes-(1) Cable fault locating machine to be arranged at site with in 12 hrs after intimation (2) Earth work will be measured seperatly.(3) Cost of transpotation is deemed to be included in the quoted unit rate.

Cutting and trimming of tree branches/ pushes 2 mtr all around of single pole any size obstructing lumination of street light pole removing trimmed tree branches and bushes complete all as specified and directed.

M/s A S Associates (BID ID -3176412)

H C CONSTRUCTION (BID ID -3176294)

GUJRAL BUILDERS (BID ID -3176172)