Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.5 LAccepted-AOC CAMP TENGA MARKET P O P S TENGA VALLEY DIST WEST KAMENG ARUNACHAL PRADESH PIN 790 116 | WEST KAMENG | ARUNACHAL PRADESH | 790116 | L1 | Accepted-AOC AOC AWARDED DUE TO L1 BIDDER | |
| 2 | L2₹48.3 L+₹3.6 L (8.02%)Rejected-Finance | L2 | Rejected-Finance Bidder rejected due to high Bid Value | |
| 3 | L3₹49.2 L+₹4.5 L (10.1%)Rejected-Finance | L3 | Rejected-Finance Bidder rejected due to high Bid Value | |
| 4 | L4₹50.0 L+₹5.3 L (11.9%)Rejected-Finance BOMDILA WEST KAMENG ARUNACHAL PRADESH PIN 790 001 | BOMDILA | WEST KAMENG | ARUNACHAL PRADESH | 790001 | L4 | Rejected-Finance Bidder rejected due to high Bid Value | |
| 5 | L5₹50.6 L+₹5.9 L (13.3%)Rejected-Finance | L5 | Rejected-Finance Bidder rejected due to high Bid Value |
Tender Value
₹42.5 L
EMD Value
₹85,000
Closing Date
12 Aug 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL VASEEM HIROLI
GE 859 EWS, PIN-913859, C/O 99 APO
PROVISION OF CERTAIN REVENUE AND MINOR WORKS AT TENGA HAAT, 2 FID, 4 CIB, 5 MTN DIV ORD UNIT, 5 MDSR AND CHINDIT TOP AREA OF AGE B/R I AND AGE E/M UNDER GE 859 EWS
2022_MES_540243_1
8347/E8
Open Tender
Civil Works
Item Rate
180 days
TENGA VALLEY
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE 859 EWS
₹85,000
Yes
27 Aug 2022
22 Jul 2022
13 Aug 2022
22 Jul 2022
12 Aug 2022
5 Aug 2022
Amount
Excavation in trenches not exc 1.5 m in width and 1.5m in depth and getting out in hard/ dense soil complete all as specified and directed.
Excavation over area n exc 1.5 m deep and getting out in hard/dense soil complete all as specified and directed.
Returning , filling including spreading levelling watering and well ramming in layers not exc 25 cm complete all as specified and directed.
Removal of surplus soil of distance not exceeding 50 Metre and depositing where directed at a level not exceeding 1.5 Metre above the starting point complete all as specified and directed.
Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard / ense soil complete all as specified and directed.
M&L for 75mm PCC 1:3:6 type C-2 using 40mm garded aggregates as in subbase for floor.
M&L for PCC 1:3:6 type C-1 (20 mm graded stone aggregate) precast cement concrete block masonary with solid blocks 10 cm thick and setting in CM 1:4 etc complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 (20 mm graded stone aggregate) precast cement concrete block masonary with solid blocks exc 10 cm in width and setting in CM 1:6 etc complete all as specified and directed.
M & L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for construction of septic tank for 10 users, in hard/ dense soil, foundation in PCC 1:3:6, type C-1, stonte masonary wall in CM 1:4, RCC slab cover including RCC precast manhole cover having 6 mm plate embedded all around/ fibre reinforced cover with angle iron frame vent shaft and sludge chamber complete all as specified in drawing ED-2007 and as directed.
M&L for construction of 1.20 m dia x 3.00 m deep sokage well , excavation in hard/ dense soil, foundation PCC 1:3:6 wells of honey combed precast PCC block wall masonary including intercepting chambers, RCC cover slab, filling with brick bats complete all as specified in drawing and as directed.
Material and labour for providing plain cement concerete (1:3:6) type C-2 as in concrete bed to drain pipes including packing under and haunching against the sides of pipes of bore 160 mm on after they are laid and tested complete all as specified and directed.
M&L for 150mm dia SGSW pipes 150mm dia grade A laid in trenches and jointed in CM 1:1 including pipes laid on PCC bed, packing undr and haunching against sides complete all as specified and directed. Note : Earthwork, PCC bed and PCC haunchings shall be measured and paid separately.
S&F Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour havimg tensile strenght of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws as specified and directed complete all as specified and directed. Make : Prestar/ JSW/ Dyna Roof/ Dura Roof
S&F Pre-Painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour havimg tensile strenght of 550 Mpa as in ridges , fixed with self tapping screws as specified and directed complete all as specified and directed. Make : Prestar/ JSW/ Dyna Roof/ Dura Roof
M&L for applying two coats of synthetic enamel paint over one coat of red oxide primer including preparing new steel surfaces to receive painting of any description over 10cm width or girth complete all as specified and directed.
Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
S&F 3 mm thick figured glass, ordinary quality and glazing with oil putty in squares n exc 0.5 Sq.m in each pane of any description complete all as specified and directed.
S&F 5.5 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares exc 0.5 Sq.m in each pane of any description complete all as specified and directed.
S&F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 Sq.m in each pane of any description complete all as specified and directed.
S&F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares exc 0.5 Sq.m in each pane of any description complete all as specified and directed.
Welding in repairs n exc 2.5 cm in length thickness of metal exc 6mm but n exc 9mm in thickness.
Demolition of cement concrete (unreinforced) in ground floors and paving’s not exc 15 cm thickness (below or above ground level)
M&L for 25 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in subbase for floorings complete all as specified and directed.
M&L for 15 mm thick screed bed in CM 1:4 finished rough for laying floor tiles.
Material and labour for 15mm thick rendering in cement mortar (1:4) on brick or concrete wall surfaces finished even and smooth without using extra cement complete all as specified and directed.
Material and labour for 15mm thick rendering in cement mortar (1:6) on brick or concrete wall surfaces finished even and smooth without using extra cement complete all as specified and directed.
Preparing newly plastered surfaces of walls and applying three coats of white wash.
Preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer.
Preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of 3mm thick wall care putty.
Preparing newly plastered surfaces of walls and applying two coats of OBD over a coat of 3mm wall care putty complete all as specified and directed.
Material and Labour for Reinforced Cement Concrete 1:2:4 (using 20 mm graded crushed stone aggregate) type B1, as in beams, plinth beams, cantilever, bressummers, lintels over 1.5m span etc complete all as specified and directed. Note : Reinforcement and Formwork shall be measured and paid separately.
Material and Labour for Reinforced Cement Concrete 1:2:4 (using 20 mm graded crushed stone aggregate) type B1, as in footings complete all as specified and directed. Note : Reinforcement and Formwork shall be measured and paid separately.
Material and Labour for Reinforced Cement Concrete 1:2:4 (using 20 mm graded crushed stone aggregate) type B1, as in Column, pillars etc complete all as specified and directed. Note : Reinforcement and Formwork shall be measured and paid separately.
Material and Labour for Reinforced Cement Concrete 1:2:4 (using 20 mm graded crushed stone aggregate) type B1, as in slabs supported on walls, beams and columns etc all as specified and directed. Note : Reinforcement and Formwork shall be measured and paid separately.
M&L for TMT bars 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips, all as specified and directed.
S&F Mild steel TMT bars 6 to 8 mm dia., as in stirrups cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips.
S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. grade St.-240 complete all as specified and directed.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough flat concrete surface complete all as specified and directed.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified and directed.
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide add for fair finished surface complete all as specified and directed.
M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.
M&L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in subbase complete all as specified and directed.
M&L for 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete finished rough to receive tiles complete all as specified and directed.
M&L Glazed coloured ceramic tiles 350 x 250 x 7mm / (450 x 350) x 7 mm thick as on vertical surfaces of wall set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.
M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade.
M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade.
M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm,in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade.
M&L for light shade vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tile n exc 0.36 sqm in floors/ skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M & L for 50 mm thick II nd class Hard wood clean sawn boarding with butt joints fixed with nails in any situation.
S&F 4mm thick plywood , graded BWR, type BB fixed with nails to timber frame work fixed to ceiling surface etc complete all as specified and directed.
M&L for 2nd class hard wood plain fillets, square, rectangular or triangular in section, wrought, secured with nails having sectional area exc. 3 sqcm and n.exc 6 sqcm, complete all as specified and directed.
Material and labour for preparation of new wooden wood based material over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue , pinned at joints complete all as specified and directed.
Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required exc half brick but not exc one brick.
S&F mild steel flat iron as in holdfast and similar articles conforming to Fe-290 Gde E-165 complete all as specified and directed.
Supply and fix 2nd class hard wood plain framed panelled shutters 35 mm thick (any number of panels) with panels of timber flat on both sides, feather edged or of veneered particle board medium density, wood particle board with commercial face veneer complete all as specified and directed.
S&F anodised aluminium snap grid of size 605x605mm, for false ceiling with aluminium anodised section wall angles 40x25x2mm thick main/cross T sec, 3605mmx25mmx1.4mm and 23.5mmx26.4mmx1.4mm and suspended with 6mm dia GI wire respectively including 8mm thick laminated gypsum board fixed to aluminium snap grid all as per clasuse 10.38 (i) of SSR part I as per manufacturers instructions complete all as specified and directed.
Supply and fix 30mm thick 2nd class hardwood glazed and skeleton shutters divided in to squares, with plain chamfered or rounded, mitred and rebated sash bars any numbers ,prepared to receive glass, gauge etc. with , edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. size of members of shutters as specified SSR Part-I, section 8, clause 8.20(b) complete all as specified and directed.
S&F anodised aluminium doors shutters, partition panels section weighing 0.55 kg/m including necessary joining cleats, glazing cleats, rubber neoprene packing , anodised aluminium snap beading screws etc. complete all as pecified and directed.
S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified.
S&F anodised aluminium frame for doors, windows, ventilators with one or more rebated including joining cleats for fixing etc complete all as specified and directed.
S&F 100mm long SS butt hinge, medium weight, cold rolled complete with SS screws all as specified and directed.
S&F 100mm long MS butt hinge, medium weight, cold rolled complete all as specified and directed.
S& F Aluminium anodised barrel tower bolts 200 mm long of extruded section and fixed complete all as specified and directed.
S& F Aluminium anodised barrel tower bolts 150 mm long of extruded section and fixed complete all as specified and directed.
S& F Aluminium anodised barrel tower bolts 100 mm long of extruded section and fixed complete all as specified and directed.
S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodized, handle fabricated type complete all as specified and directed.
S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodized, handle fabricated type complete all as specified and directed.
S & F aluminium alloy, anodised, sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.
M&L for prelaminated particle board 9mm, exterior grade, prelaminated both sides with decorative choice lamination.
S&F aluminium grill with frame to aluminium window including any atracted aluminium section and necessary fittings etc.
S&F Aluminium (extruded section body) door closer hyraulically regulated designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg.
S&F pre coated mild steel floor door stopper tongue anodised 140mm length including vulcanised rubber piece complete all as specified and directed.
S&F gate and shutter hooks and eyes 75mm brass type all as specified and directed.
S&F 300mm long MS ordinary rat tail, rod pattern springs including roller and roller plastes.
S & F GI steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm etc all as specified.
S&F swivel shower rose of PTMT any colour for fixing with 15mm pipe (min wt 40 gm) all as specified and directed.
S&F bib tap chromium plated cast copper alloy, fancy type, 15mm dia with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed.
S & F chromium plated 15mm dia angle stop cock cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified
S&F solid PVC Door Frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, and fixed in opening as per specification and drawing complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F 15 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes fixed to walls or laid in trenches complete all as specified and directed.
S&F 20 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes fixed to walls or laid in trenches complete all as specified and directed.
S & F vitreous china wash down water closet pan of pedestal pattern, white with 'P' or 'S' traps, including connecting to trap and to flushing pipe etc complete all as specified. (Make: Hindware /Parryware /Cera /Commander)
S & F plastic water closet seat cover, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete.
Supply and fixing vitreous China squatting pan, "Orissa" pattern size 580 X 440 mm, white, (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and complete.
S&F 10 litres PVC, valveless, syphonic action type, flushing cistern low level, white with inlet ball walve float chain and pull and bracket complete all as specified and directed.
Supply and fix PVC (SWR) pipes single socketed 110 mm dia in any length with rubber ring joints fixed to walls, clamps/hook for holding of pipe etc complete all as specified and directed.
S&F PVC (SWR) junction single, (single T) equal or unequal provide with access door 110 mm bore complete all as specified and directed.
S&F PVC (SWR) bends 110 mm bore of any radius complete all as specified and directed.
S&F PVC (SWR) vent cowl 110 mm bore.
S&F PVC (SWR) WC connector 110 mm bore with lip ring complete all as specified and directed.
S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
Supply and fix PVC (SWR) pipes single socketed 75 mm dia in any length with rubber ring joints fixed to walls, clamps/hook for holding of pipe etc complete all as specified and directed.
S&F PVC (SWR) bends 75 mm bore of any radius with access doors complete all as specified and directed.
S&F brass chromium plated towel rail 60 cm long of 20 mm dia , D type, fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms)
S&F vitreous china wash hand basin white flat back of size 550mmx400 mm including pipe chain and plug, CI brackets complete all as specified and directed(Make: Hindware/Parry) complete all as specified and directed.
S&F 32 mm bore dia of discharge pipe waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified and directed.
S&F fancy type, cast copper alloy, with capstan heads, chromium plated pillar tap for WHB screwed down for iron pipes of 15mm bore complete all as specified and directed.
S&F Vitreous China urinals, bowl type (back or corner wall type), size of 465x355x265 mm white (minimum) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)
S&F CP health foucet with 1.00m flexible tube and wall hook complete all as specified and directed. Make:- Jaquar Cat Part No :- ALD-565 or equivalent Model of Makes specified in PS.
S&F urinal spreader of PTMT any colour for fixing with 15mm dia pipe (minimum weight 60 gms) complete all as specified and directed.
Supply and fix Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.
S&F CP soap dish any type, fixed to plugs with CP brass screws.
Supply and fix PVC water storage tanks of 500 ltrs rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.
Supply and fix PVC water storage tanks of 1000 ltrs rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.
S&F ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20 mm dia complete all as specified and directed.
S&F Gun metal globe or gate valve with Iron wheel head, screwed both ends for 20 mm dia of pipe complete all as specified and directed.
M&L for 75 mm thick PCC (1:3:6) type C-1 ( using 20mm graded crushed stone aggregate) finished even and smooth without using extra cement as in plinth protection complete all as specified and directed.
Material and Labour for Point wiring with 1.50 sq mm (nominal area), two single core PVC insulated unsheathed , 1100 volts grade, multi-stranded copper conductor FRLS Grade, in and including PVC casing capping with accessories with teak wood boxes and 3 mm thick plastic laminated sheet top cover size with all fittings and accessories including MS pressed steel terminal boxes of 1.22 mm thick of suitable size duly painted with red oxide metal primer for housing/mounting brackets switches,sockets etc, including PVC insulated unsheathed single core multi-stranded copper conductor FRLS Grade cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly for one light/point controlled by one way switch complete all as specified and directed.
All as per item No 112 here-in-before but for one 3 Pin 5 Amp switch outlet controled by one switch on the independent board complete all as specified and directed
All as per item No 112 here-in-before but for one 3 Pin 5 Amp switch outlet controled by one switch on the same board with other switches complete all as specified and directed
All as per item No 112 here-in-before but for 3 pin 15 Amps socket outlet independant board drawn from DB and including PVC insulated multi stranded copper conductor 2.50 sqmm 1100 volts FRLS grade and earth continuity wire 2.50 sqmm PVC insulated copper wire (Green) FRLS grade including PVC casing and capping complete all as specified and directed.
All as per item No 112 here-in-before but for 3 pin 15 Amps socket outlet independant board drawn from DB and including PVC insulated multi stranded copper conductor 4.0 sqmm 1100 volts FRLS grade and earth continuity wire 4.0 sqmm PVC insulated copper wire (Green) FRLS grade including PVC casing and capping complete all as specified and directed.
S&F switch socket combination multipurpose 5/6 A flush type, 3 in 1 , 240 volts complete all as specified and directed.
S&F switch socket combination multipurpose 15/16 A flush type, 3 in 1 , 240 volts complete all as specified and directed.
S&F switch piano flush type SP, one way, 5 Amp , 240 Volts complete all as specified and directed.
Supply and fix ceiling rose surface bakelite 65 x 50 mm two to three terminals AC 230 volts complete all as specified and directed.
Supply and fix lamp holder, insulated body, with back plate for angular batten fittings with one PVC block of size 75mmx75mm for mounting the fittings complete all as specified and directed.
Supply and fixing 1x10 W LED lamp complete all as specified and directed. Cat No. LHLDEUEEML8RO10 of Make Havells or equivalent model of Make as specified in CA.
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder, two square box for mounting including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
S&F LED luminaire 600mmx600mm, 35/36 W,220 V AC recessed type with high efficiency PMMA diffuser soft glare free high complete with driver holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
S&F LED lights fittings 1x9/ 1x10 watt, 220 V, AC bulkhead luminaire incl LED light driver holder connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
S&F environmental friendly, ultra modern, energy saving, surface mounted decorative hexagon LED bulk head 10 W including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable complete all as specified and directed. Make : HAVELLS Cat Part No. HEXAFT10WLED857SSYMBOPC or equivalent model of make PHILIPS/ BAJAJ/ CG / EVEREADY
S&F square shaped recess/suspended mounted environmental friendly new generation aesthetically ultra modern with high brightness LEDs as light source LED flat panel, 36 W, 2'x2' size, complete with driver and all acessories and including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable complete all as specified and directed. Make : Crompton Greaves Cat Part No LCTLRNE-36-FO-CDL/WW or equivalent in PHILIPS/BAJAJ/HAVELLS/EVEREADY
S&F sheet metal enclosure for DBs when MCBs to be used single pole and neutral 2 way, single door with 200 Amps rated bus bar, 240 volts fixed sunk/ flush to the wall or in niche complete all as specified and directed.
Supply and fix sheet metal enclosures for DBs (Double door type) when MCB SPN 4 way with 200 Amps rated bus bar complete all as specified and directed.
Supply and fix sheet metal enclosures for DBs (Double door type) when MCB SPN 8 way with 200 Amps rated bus bar complete all as specified and directed.
Supply and fix MCB SP 6-32 Amp 240 volts,50 HZ , confirm to IS /IEC 60898 breaking capacity of 10 KA, C-curve complete all as specified and directed.
S&F MCB SP&N , 32 Amps, 240 volts, 'C' series, complete all as specified and directed.
S&F MCB SP&N , 35-60 Amps, 240 volts, 'C' series, complete all as specified and directed.
Supplying and fixing 1100 volts grade heavy duty 10 Sqmm cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular.
Supplying and fixing 1100 volts grade heavy duty 6 Sqmm cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular.
S&F wall mounted fan of 300mm sweep, off white colour, pull cord control for speed & oscillation, ON/OFF, high speed motor for higher air delivery, thermal overload protection and connecting up to ceiling rose/ socket.
S&F exhaust fans made of sturdy Engg plastic complete with louvers shutter, voltage 230 V, 50 Hz, 1200 RPM, copper winding of 300 mm sweep. Make : Bajaj/ C&G/ Havells/ Philips
Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised earth lead of 4mm dia GI wire by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge and earth testing on completion complete all as specified and directed.
M/S DKT CONSTRUCTION
M/S ASHOK CONSTRUCTION
M/S R N ENTERPRISES
M/S SUNRISE CONSTRUCTION AND CO
M/S SM ANSARI
M/S YOGENDRA CONSTRUCTION CO
M/S N D ENTERPRISE
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .