Const of Alternative 11 KV UG Line and Providing Street Light and high Mast Infront of Flatted Factory Sector 13 GIDA Gorakhpur

S/o ST pole IS-410, SP-55- 11 mt. (SIR-2025-26) Sl No-43

S/F Grouting of ST Pole.As per uppcl C.D. A1/19,2021-22

S/o Plinth of Poles. uppcl.

S/F Earthing of pole by MS earthing rod of 20x2500mm and 6 SWG earthing wire etc.As per uppcl. C.D A1 ,2021-22

Numbering of Poles. C.D. A1, Point-14 2021-22

S/o Aluminium paint.+Red oxide paint.(SIR 2025-26 Sl No 52,53)

S/F Stay 11 KV Line Rod 20x1800m wire 7/8 SWD 10Kg Stay Complete Clamp Bolt nut & washer GUY Insulator with concerting & Grouting.As per uppcl. C.D A8/19, 2021-22

S/F Top Channel 125x65mmx3200mm Long With Clamp (10.70 Kg/mtr.) As per uppcl.C.D A9, 2021-22

S/F 11 KVA Polymeric Disc Insulator 45 KN (B&S type).As per uppcl. SIR 2025-26 Sl No.48

S/F 11 KVA Polymeric Pin Insulator with Nut & Bolt.uAs per uppcl. SIR- 2025-26 Sl No-53

S/F MS- Angle Iron 65x65x6 mm. X4300 mm long Cross backing with Clamp.As per uppcl. C.D A8, 2021-22

S/F Droper Channel

S/F Dropper Clamp. As per UPPCL.

Dismentalling of existing pole 11 KV line.

Recived back old & use Conductor/Associres

S/o 11 KV XLPE Cable 3x185mm sq.mm uppcl.(KEI, Gloster, Polycab, universal) SIR 2025-26 Sl No-15

S/o 11 KVA Jointing kit (3x185 sqm.) out dor uppcl.SIR 2025-26 Sl No-117

S/F 11 KV HT Feedar box. Uppcl.

Grouting of 11 KV HT Feedar box (10x4 leg) uppcl

Earthing for HT 11 KV feedar box. As per PS 725 A

Root marker DSR- 22- 7.9

S/F HDPE pipe PE-80 PN-10BN size 140mm dia. 6mtr/lenth SIR 2025-26 Sl No-126

S/o Straight throught (3x185 sqm.) SIR 2025-26 Sl.117

S/ of 11 KV LT Cable 3.5x240 Sq.mm.uppcl(SIR-2025-26)-Sl No.05

S/F of 10mtr GI octagonal pole of approved make( PWD approved) totally hot deep galvanized in one section with no. circumferential weld of approved make, (top dia 100 mm and Bottom dia 200 mm and base plate 16mm thik) having 3mm thickness sheet with Single arm bracket 1mtr lenth in 1:2:4 RCC foundation bolt including the cost of Foundation, excavation & back filling and Required T&P complete in all respect. UP-PWD Seh No 649

Supply and fixing of LED street light fitting having die cast aluminium body and diffuser with driver set suitable for 110 to 130 Watt. confirming to IP 66 IK-10, 130 LM/W protection CAT- AAA complete in all respect. Make-Crompton, Phillips, bajaj. Approved in UPPWD, No. 1424 CAT-AAA Crompton, Phillips, Surya Bajaj.

Supply and fixing of 20 mtr. High mast shaft of approved make with rising system hot dip glavanized inside & out side dip heaving pole sheet thickness 4 mm. Top dia minium 150mm Bottom dia 410 mm base Plate 32 mm thick suitable for wind velocity as per Is 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 8 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc comlette in all respect. uppwd seh No .653make Bajaj, Crompton, Philips, Surya, BP, Utkarsh.

Supply and fixing of factory wired integral LED flood light luminaires with dia cast aluminium housing built with driver set suitable for 200 Watt. Confirming to IP 66 IK-10, 130 LM/W protection CAT- AAA complete in all respect. Make-Crompton, Phillips, bajaj, Surya. Approved in UPPWD, No 1455

Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of the time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument and instrument box with CTs etc. In case of TPN with Locking Arrangment complete in all respect. 25A TPN. uppwd seh. no 807(e)

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II Complete with fitting and cutting, jointing etc. direct in ground(75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc, complete as required. 90 mm dia(OD-90 mm & ID-76 mm nominal) of approved make & as per direction of E/I. DSR-2022

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 volts grade at a depth of 750mm below ground level over a cushion of 75mm. thick sand all around and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as connected with the earth conductor by clamps etc labour charge included. uppwd seh. no 501 25 sq. mm 3.5 core(Polycab, KEI, Havells, Gloster)

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 volts grade at a depth of 750mm below ground level over a cushion of 75mm. thick sand all around and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as connected with the earth conductor by clamps etc labour charge included. uppwd seh. no 501 35 sq. mm 3.5 core(Polycab, KEI, Havells, Gloster)

Supply and Fixing All. Conducter XLPE Cable 2x6 sq.mm SIR 2025-26 Sl No-01

Avaition Light for highmast complete in all respecte. as per direction of E/l

S/of Fencing With MS Iron Angle Strip & 6 SWG Wire . (Size 1.5x1.5x3 cub.mtr.) CD-2019 A-29

Supply, delivery, erection, testing & commissioning of cubicle type out-door weather proof Main Feeder Pillar made of 3mm MS sheet of size 1500X1000X600mm water tight, dust & vermin proof with hinged door & locking arrangement on front & rear side, 2 nos locks, incoming & outgoing fuse carriers, cable entry, earthing strip, incorporating the following technical specifications with complete power coating: Single line diagram on main feeder pillar is to be painted showing feeding arrangement. (a) Incoming 1 No. - 400 Amp. SFU with MCB System (b) Bus-bar 500V, 400Amp., TPN aluminium with insulation paint. Size 50X8 mm. (c) Outgoing 10 Nos. 150A TPN, 415V MCB carriers with MCB System, Siemens/L&T/C&S make.) As per drawing of feeder pillar enclosed. & The feeder pillar will be mounted on cement concrete foundation 1.24 (1) cement 2 coarsand graded stone aggregate 20 mm nominal size) of suitable size. Feedar pilar will be Manufacture on Morden Electrical Switch Gear System in Place HRC Fuse System. The feeder will be manufactured by C.P.R.I approved as per E/I GR.NOIDA AOR.

Add Cartage and erection charge @15% on Sl No. 1 to 39 Add GST @ 18% Already included on Sl No. 1 to 24 &38

Laying of Underground cable As per uppcl

W/o Tranchless road Crosing and Cable ducking by HDD mathod 3 mtr below the ground suface (Duble Circuit.).As per rate noida authority.(AOR)

Add GST @ 18% on Sl No. 25 to 38

Please Enable Macros to View BoQ information