Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.6 LAccepted-AOC WEST BIDYUTPUR MALDA | MALDA | MALDA | WEST BENGAL | L1 | Accepted-AOC L1-Accepted | |
| 2 | L2₹2.6 L+₹160.30 (0.06%)Rejected-Finance MAHESMATI MALDA | L2 | Rejected-Finance Higher than L1 | |
| 3 | L3₹2.6 L+₹387.34 (0.15%)Rejected-Finance PAKUAHAA MALDA | MALDA | MALDA | WEST BENGAL | L3 | Rejected-Finance Higher than L1 |
Tender Value
Refer Docs
EMD Value
₹5,300
Closing Date
11 Sept 2024, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
ASSISTANT ENGINEER, MALDA MECHANICAL DIVISION,PHED
Office of the Executive Engineer, Malda Mechanical Division, PHE Dte. Doulatpur PHE complex, P.O. Maliha, Dist. Malda, PIN 732102
Supply, delivery and installation of electro-mechanical components of Inline Boosting Pump-motor set at Gopalpur (Itahar) Water Supply Scheme in the District of Uttar Dinajpur under Malda Mechanical Division, PHE Dte.
2024_PHED_739793_1
WBPHED/AE-I/MLMD/NIeT_04 of 2024-2025
Open Tender
Electrical Work/ Equipment
Item Rate
30 days
Doulatpur PHE complex, P.O. Maliha, Dist. Malda
Please refer Tender documents.
3 documents required · 3 mandatory
₹5,300
Yes
13 Jun 2025
30 Aug 2024
13 Sept 2024
30 Aug 2024
11 Sept 2024
30 Aug 2024
Amount
Supply and delivery at site of following pumping machinery and electrical accrssories:
Three Phase multi-stage vertical inline pump-motor set having Following Specification. Dischage - 22.0 m3/hr, Head - 15.0 mtr. Nominal Dia of Suction - 65mm and Discharge - 65mm, Impeller - SS, Speed, Rated - 2900 rpm. Driver Motor Rating - 2.2KW/3.0HP, 2 Pole, 3 phsae, DOL starting method.
1.1 KV grade 2.5 sqmm x 3 core water proof flat submersible cable for above motor.
1.1KV grade 10 sq.mm 4 core XPLE Aluminium armoured cable conforming to IS 7098 (Part-I) 1988, with upto date amendments as per site requirement.
Cast iron double flanged single door swing Non Return valve generally conforming to IS 5312 part 1 and valve suitable for maximum working pressure 10/16 kg/cm2 (seat test) & body tested to 15/24 kg/cm2 with P.N 1.0 rating.
Cast iron double flanged non rising spindle 80mm dia Sluice valve generally conforming to IS 14846 and P.N rating 1.0.
63 Amps Re-wireable porcelain fuse unit type TPN Main Switch with steel sheet enclosure (Conforms: IS/IEC600947-1&3).
63 Amps Kit-kat rewireable proceliain fuses carrier & base (Specification-IS:2086).
Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming o ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I)
100 mm dia PVC pipe.
80 mm dia PVC pipe.
80 mm dia PVC Elbow
80 mm dia PVC TEE
100 mm dia PVC Flange
100mm X 80mm Reducing Socket
100 mm dia PVC Socket
Supply, delivery of M.S Kiosk box of 900mm x 600mm x 300mm (LxWxH) Size having thickness of 1.5mm with angle support at four legs having hight of 600mm with provision of locking arrangement, supply of lock, cable entry point including painting by one coat of blue paint over one coat of primer all complete.
Making suitable size pump foundation including erection of Kiosk box with supplying of necessary cement, sand and stone chips including plastering and net cement finish complete.
Installation of the the above Pump Motor set (i.e item no 1.1) on Concrete base with base plate by fixing nut bolts to ensure proper alignment with its delivery pipe line and fitting fixing Non-return valve, Sluice Valves (i.e item no 1.5 & 1.6) to its suction & delivery pipe line. This cost also include the supplied specials / accessories including supply of cable gland, sockets, etc as required to complete the job as per direction and up to the entire satisfaction of the EIC.
Fitting & Fixing of PVC pipes & fittings Schedule 80 (to be supplied under above item no 2.1 to 2.7) for making suction & delivery pipe line and also supplied specials / accessories etc as required to complete the job as per direction and up to the entire satisfaction of the EIC.
For Inline Boosting Pumping machinery and others - - - Construction of different dia Sluice valve /Air valve /Washout chamber in different sizes for village road where light traffic run and for main road where heavy traffic run as deptt. approved drawing with 25cm thick brick work (1:6) over cement concrete (4:2:1) over a single B/F soling over150mm.thick sand filling in foundation including earth work inexcavation and disposal of excess earth from work site with RCC (1:1.5:3) cover slab 100mm / 150mm thick slab on top of chamber with 1% reinforcement in RCC cover slab with necessary opening for operation of valve all complete including cost of labour & materials as per Departmental Dwg. [Reinforcement type:- Other manufactuerers not specified] (200 mm dia pipe).
For Sluice Valve - - - Construction of different dia Sluice valve /Air valve /Washout chamber in different sizes for village road where light traffic run and for main road where heavy traffic run as deptt. approved drawing with 25cm thick brick work (1:6) over cement concrete (4:2:1) over a single B/F soling over150mm.thick sand filling in foundation including earth work inexcavation and disposal of excess earth from work site with RCC (1:1.5:3) cover slab 100mm / 150mm thick slab on top of chamber with 1% reinforcement in RCC cover slab with necessary opening for operation of valve all complete including cost of labour & materials as per Departmental Dwg. [Reinforcement type:- Other manufactuerers not specified] (80 mm to 150 mm dia pipe).
ADD GST @ 18%
ADD Cess @ 1%
ANIMA ENTERPRISE (BID ID -5509525)
PABITRA MANDAL (BID ID -5521857)
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .