CA NO CWE/CHM-72/2019-20 REPAIR/REPLACEMENT OF CHAJJA, PLASTERING, FLOORING, JOINERY, ROOF REPAIR AND OTHER B/R AND E/M ITEMS IN CERTAIN MD ACCN UNDER AGE B/R II AT CHANDIMANDIR

Amount

Taking down chowkats or frame n. exc. 1.5 Sqm each with shutter(s) (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkats or frame exc 1.5 sqm and n exc 4 sqm with shutter (without taking off shutter from the frame) complete all as specified and directed.

S&F factory made solid PVC frames having profile 125mm x 60mm for doors with one or more rebates homogeneous fine cellular structure having density of 750 smooth outer intergral skin with suitable metal stiffners and fixed with 100x8mm sheet metal screws Complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4, type B0 using 12.5mm graded stone aggregate as in sub base for levellig of floor complete all as specified and directed.

S&F 35mm thick flush shutters, solid core costruction, with block board core and plywood face panels, water proof shutter all as specified and directed.

S&F 35 mm thick second class hard wood (three panel,divided into sub panels with provn of one vertical rail in full height) glazed and skelton shutters open rebated prepared to received gauge glass etc, edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass complete all as specified and directed.

S&F Factory made steel window box type with side hung shutters including box type hinges, 125mm size steel handle-02 Nos, mild steel ISI marked tower bolt 125mm size minimum 2 Nos for each shutter with and including necessary MS hold fasts complete with glazing bars, dovetailed or welded with and including a shop coat of red oxide,fixed as in repair complete all as specified and directed.

S&F Factory made steel window box type with side hung shutters including box type hinges, 125mm size steel handle-02 Nos, mild steel ISI marked tower bolt 125mm size minimum 2 Nos for each shutter with and including necessary MS hold fasts complete without glazing bars, dovetailed or welded with and incl a shop coat of red oxide fixed as in repair complete all as specified and directed.

S&F factory made box type steel ventilators with and including necessary MS hold fasts including one shop coat of red oxide primer, hinges, tower bolts 100 mm, steel handles and steel peg stay complete without glazing bars devetailed or welded as in repair complete.

S&F stainless steel wire cloth 0.36mm nominal dia of wire & avarage width of aperture 1.18 mm, fixed with tinned tacks complete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.18 Sqm but n. exc 0.36 sqm in floors & skirting , over & including 15 mm thick cement mortar (1:6) screed etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden, metel frames including punching or drilling out glazing pins/spring clips complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.

S&F 4mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty (or beading) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.

Material & labour for solid PVC board 16 to 18mm thick interior grade, white colour,fixed with screws in almirah shelves,kitchen cabinet, etc. as in repair complete all as specified & directed .

M&L light shade coloured Vitrified double charged tiles 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.18 sqm and n. exc. 0.36 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and incl 15mm screed in CM 1:6 complete all as specified and directed.

All as per item No 16 above but as in skirting/daddo over and including 10mm rendering in CM 1:4 complete all as specified and directed

S&F factory made solid PVC frames having profile 60mmx30mm for doors with one rebates homogeneous fine cellular structure having density of 550 smooth outer intergral skin with suitable metal stiffners and fixed with 100x8mm sheet metal screws complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), homogeneous fine cellular structure having density of 750 smooth with two,four,six raised panel design fixing in frame all as specified & directed.

Framed work such as grills, guard bars etc welded to steel frame MS round/square bars conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F 100mm size butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed to doors shutters, type C-21 complete all as specified and directed.

All as per item No 21 here-in-before but 75mm size.

S&F 200 mm size Aluminium , barrel tower bolt of extruded section and fixed complete all as specified and directed.

S&F 150 mm size Aluminium, barrel tower bolt of extruded section and fixed for PVC door complete all as specified and directed.

S&F 150 mm size Aluminium, handles cast type complete all as specified and directed.

S&F 250 mm long MS, sliding door bolt complete all as specified and directed.

Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed.

Preparation of New or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of red oxide, zinc chrome complete all as specified and directed.

All as per item No 28 here-in-before but except primer.

M&L 300mm ordinary rat tail rod pattern spring incl roller plate complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Brick work using old size bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar 1:6, complete all as specified and directed.

Taking down existing plaster of any description on brick wall/ concrete surface including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified and directed.

M&L for cement plaster 10mm thick in CM 1:4 on fair faces of concrete/brick surfaces as in ceiling, chajja, etc. finished fair and even complete all as specified and directed.

M&L for 15mm thick rendering in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in Cement and Sand mortar 1:4 over brick or concrete surfaces finished even and fair without using extra cement complete all as specified and directed.

M&L for racking out to existing brick tiles as in roof and flush pointing in cement mortar (1:3) complete all as specified & directed.

Preparation of new surfaces of any description of walls,facia, ceiling, RCC etc and applying two coats of oil bond distemper @ 10Sqm/litres over and including one coat of interior wall primer @10Sqm/litres over and including 1.5 mm to 2.5mm thick wall care putty and sand papering making the surfaces even and smooth complete all as specified and directed.

M&L for preparing new plastered surfaces and applying two coats of cement base paint on new wall surfaces including all necessary wetting and curing complete all as specified.

Complete removal of existing treatment of any type/description viz cement base paint,external emulsion etc from plastered or unplastered surfaces of walls,chhajjas,facia,cantilivers,RCC etc with mechanical means/grinder completely and applying two coats of cement base paint @ 5 Sqm/litres over and including one coat of exterior wall primer @11Sqm/litres with and including necessary scaffolding and safety arrangements complete all as specified and directed.

Complete removal of existing treatment of any type/description viz cement base paint,external emulsion etc from plastered or unplastered surfaces of walls,chhajjas,facia,cantilivers,RCC etc with mechanical means/grinder completely and applying two coats of exterior emulsion paint @ 5 Sqm/litres over and including one coat of exterior wall primer @11Sqm/litres with and including necessary scaffolding and safety arrangements complete all as specified and directed. Make of exterior wall primer: Asian/Berger/Nerolac(Best quality). Make of exterior emulsion: Asian (ACE)/Berger (WALMASTA)/Nerolac (SURAKSHA Superior).

All as per item No 42 herein-before but make of exterior emulsion : Asian(Apex), Berger(weather coat anti dust) Nerolac (Excel Total).

Complete removal of existing treatment of any type/description viz distemper,white wash etc from walls,facia, ceiling, RCC with mechanical means/grinder completely and applying two coats of oil bond distemper @ 10Sqm/litres over and including one coat of interior wall primer @10Sqm/litres over and including 1.5 mm to 2.5mm thick wall care putty and sand papering making the surfaces even and smooth complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of reinforced cement concrete in roofs, floors, (other than ground floors), beams, staircases, landing, chajjas and similar suspended work, complete all as specified and directed.

Material and labour for 50mm thick plain cement concrete type 1:3:6 C-1 (using 20mm graded crushed stone aggregates) as in plinth protection finished fair and even without using extra cement complete all as specified and directed.

Material and labour for 75mm thick plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed.

Demolition of un-reinforced cement concrete exc 15cm thick of any description and in any position (in sunken portion) not other wise specially provided for and removing all demolished material/debris exc 250m but n.exc 500m from the site and depositing where directed complete all as specified and directed.

M&L for plain cement concrete 1:7:12 type F-2 using 40mm graded crushed brick aggregate as in sunken floor filling and mass concrete complete all as specified & directed.

Water proofing treatment to SUNKEN PORTION and adjoining walls of kitchen. WC, Bath & Toilet, etc. : 15 mm thick plaster in cement mortar (1:3) after roughening and cleaning the surface mixed with WP compound as per manufacturer’s instructions shall be provided on sunken portion (a) Apply cement slurry to the surface @ 0.488 kg /Sq. m of cement mixed with Acrylic based polymer modified cementious composite compound @ 0.253 kg/Sq. m and the surface will be allowed to air cure for 4 hours. (b) Apply another layer of cement slurry @ 0.242 kg/Sq. m of cement mixed with Acrylic based polymer modified cementious composite compound @ 0.126 Kg/Sq. m and the surface will be allowed to air cure for 4 hours. (c) Curing the sunken portion with water minimum for 48 Hrs by ponding. (d) Paste one layer of 3mm thick APP membranne with bitumen by torch application to the treated sunken surface. (e) Joints/Traps/WC/soil pipes shall be properly sealed with approved sealing compound of make mentioned in Appx'B' (f) Testing of all traps & joints shall be done after sealing and before filling of sunken slabs.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

S&F Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over & including 15 mm thick screed or bedding layer in CM 1:6, complete all as specified and directed.

M&L Glazed ceramic coloured tiles 300mmx450mmx 7mm thick as in dado, set and jointed in neat cement slurry and grouted in white cement complete as on vertical surfaces over & including 10 mm thick screed or bedding layer in CM 1:4 complete all as specified and directed.

18-20 mm thick,granite stone slab over & including 15mm thick average thicknesss screed bed in cement mortar 1:4 bedded and jointed with grey cement slurry and pointed with grout of matching shade including moulding and all necessary cutting & and machine polishing (table rubbed and polished), as in kitchen plateform, step, jambs, pillars and the like including taking down old unservicable slabs. complete all as specified and directed.

M&L machine cut pre polished kota stone slab on vertical/horizontal surface like floors, skirtings and stair steps etc. (single piece), 16-18mm thick, best quality , width and length as ordered by GE over and including 15mm thick (average thicknesss) in cement mortar 1:4 bedded and jointed with grey cement slurry and pointed with grout of matching shade including moulding and all necessary cutting and polishing complete all as specified and directed.

M&L RCC 1:1.5 :3, type A 0, using 12.5mm graded stone aggregate as in shelves, cover slabs of manhole, chajja, lintel or gully trap etc at any location complete all as specified and directed.

Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 m complete all as specified and directed.

Material and labour for form work to chullah hoods, chajjas and similar items including edges / sides and soffits of lintels etcrough finished surface of concrete flat complete all as specified and directed.

S&F wash hand basin, vitreous china, flat back, white of size 550x400mm with and including CP waste coupling, MS angle iron brackets, PVC connection 15mm size, 450mm long, PVC waste pipe, fixed as in repair complete all as specified and directed.

Supply and fixing vitreous china squatting pan, “Orissa” pattern size 580mm x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe complete set in cement concrete complete all as specified and directed.

S&F Vitreous China Wash down water closet pedestal pattern white with and including plastic seat cover black, closed pattern with flat bottom and cover and mild steel CP or aluminised hinging device fixed in repair complete all as specified and directed.

S&F in repairs 100mm dia C I traps 'P' or 'S' complete all as specifed and directed.

S&F in repair PVC valveless syphonic action type low level flushing cistern White' with inlet, ball valve, float, handle, PVC connection & 32mm bore CP flush pipe ( long type for squatting pan ) incl brackets complete all as specifed and directed.

S&F in repair PTMT PVC connection 450mm long complete all as specifed and directed.

M&L for preparing new plastered ceiling surfaces and applying three coats of white wash on new plastered ceiling surfaces all as specified and directed.

M&L for preparing old decorated wall surfaces and applying one coat of white washing complete all as specified and directed.

M&L for preparing old decorated ceiling surface and applying one coat of ehite washing on old ceiling surfaces complete all as specified and directed.

S&F grating doom 100mm dia of PTMT fixed to floor trap with cement mortar 1:3 fixed as in repair complete all as specified and directed.

S&F plate rack of stainless steel of size 600mmx 600mm with steel shelves and hanging arrangements for utensil, fixed as in repair complete all as specified and directed.

S&F kitchen sink with drainage board made out of stainless steel sheet 1.0mm thick with plug, washers and CP waste coupling, overall size 915mm x 460mm x 203mm, with bowl of size 405mm x 354mm x 203mm incl fixing cantilever brackets fixed as in repairs complete all as specified and directed.

S&F for 15mm bore (concealed or unconcealed as per site requirement) GI tubing medium grade with all fittings to walls, ceiling or laid under floors including cutting chases and making good in cement mortar 1:3 with and including taking down old unservicable tubing complete all as specified and directed.

All as per item No 73 here-in-before but 20mm bore pipe.

S&F 110mm dia PVC pipe laid in or under floors or walls etc as in plumbing work complete with necessary jointing with and including sockets, bend ,sealant or cement fixed in repair all as specified

Supply and fixing stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.

S&F stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 20mm bore pipe, fixed as in repairs complete all as specified and directed.

S&F bib taps brass, fancy type, Short body with wall flange, standard chromium plated, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.

M&L preparation of old surfaces of wall and applying one coat OBD complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specfied and directed

S&F stop valve (concealed type), chromium plated, fancy type, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified.

S&F chromium plated, fancy type shower rose with swivel joints 125mm dia with arm and fixing to steel pipe 15mm bore, fixed as in repair complete all as specified and directed.

Taking down rain water pipes (any types) including all fittings any size and pattern.

S&F UPVC rain water pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends of any radius.

Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in any type of mortar complete all as specified & directed.

M&L for plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in padding to roofs ,terraces,sunkens and in other locations as complete all as specified and directed.

Rendering 20mm thick, finished even and fair on roof slab and sunken portions in cement mortar 1:4, using water proofing powder all as specified. Note : - WPC will be measured and paid for separately.

Supply only water proofing compound, ISI marked complete all as specified.

Providing PCC 1:2:4 type B-0 (using 12.5 mm agg.) in seismic and other similar bands, shelves, post holes , hold fast , pcc blocks, coping, benching, roof kerbs of mud stops, rounded or chamfered on edgesand like incl necessary form work etc complete.

M&L machine pressed precast cement concret tiles 20cmx20cmx20mm thick laid over and including bedding layer of 15mm thick in CM 1:4 jointed and pointed flush in CM 1:3 complete all as specified and directed.

S&F pre-painted galvalume aluminum Zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

Dismantling water tanks of capacity exc 250 ltrs but n exc 500 ltrs complete all as specified and directed.

S&F 500 Litres capacity Rotational moulded polythene water storage tanks (cylindrical vertical with closed top ) double layered (ISI Marked) hoisted and fixed in position including PTMT ball valve 20mm bore & tank nipple, etc. complete all as specified.

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of length indicated)

M&L coloured glazed chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors fixed in grey cement and pigment over and including 15 mm screed in cement mortar complete all as specified and directed.

Material and labour for 75mm extruded brass handle fabricated type polished fixed in repair with screw and washer fixed in any position, complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm but n.exc 2.0 Sqm each.

Supply and fixing factory made steel windows (Box type) with glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer complete all as specified

Supply and fixing factory made steel windows (Box type) w/o glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer complete all as specified & directed.

S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specifed and as directed

M&L for one coats synthetic enamelled paint incl preparation of old steel surfaces of any description over 10cm width or girth complete all as specifed and as directed

M&L for preparation of old wooden surface of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specifed

Supply and fixing central hole Basin Mixer, without popup waste system with 450mm long copper pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and as directed. Make:- Prayag Cat Part No. 9250 or equivalent make mentioned in Appx 'B'.

S&F 15mm CP brass fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repair complete all as specified and as directed.

Supply and fixing wall Mixer, mixer for mixing hot & cold water screwed down for iron pipe and fixed, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and as directed Make:- Prayag Cat Part No. 9275 or equivalent make mentioned in Appx 'B'.

Material and labour for bath cabinet of size 622mm x 422mm fixed to wall with rawl plugs having arrangements to put inside toiletries, fixed as in repairs complete all as specified and directed. Make:- Prayag Cat Part No. 555 or equivalent make mentioned in Appx 'B'.

Supply and fixing sink mixer with swivel casted spout (wall mounted model), cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed. Make :- Prayag Cat No. 9255 or equivalent in make mentioned in Appx 'B'.

Supply and fixing hand jet chromium plated (health faucet with 01 m PVC pipe) for 15mm bore with fittings, fixed as in repairs complete all as specified and directed. Make:- Prayag Cat No. BEA-40 or equivalent make mentioned in Appx 'B'..

S&F PVC, waste and vent pipe 75 mm thick in any length with or without ears with cement joints, laid in trenches or in floor or fixed to walls with clamp complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified.

S&F 1000 ltr capacity Rotational moulded polye- thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old tanks all as specified in SSR Part I including folt valve and tank nippel .

S&F Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, 20mm bore fixed as in repair complete all as specified.

Demolition of Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and as directed.

M&L for Wire brushing and cleaning top surface , terracing or cement concrete, including flashings and junction of parapets, etc., applying a coat of bituminous primer @ 0.40 ltrs per square meter and M & L for APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced with polyester non woven fabric (weight not less than 150 gms/sqm) laid on primed surface by torch application complete all as specified.

M&L for Wire brushing and cleaning top surface , terracing or cement concrete, including flashings and junction of parapets, etc., applying a coat of bituminous primer @ 0.40 ltrs per square meter and M & L for APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced with polyester non woven fabric (weight not less than 150 gms/sqm) laid on primed surface by torch application with and including two coats of bituminous aluminium paint over top surfaces of APP, complete all as specified.

Cleaning and removing all scale and dirt, etc. from PVC/RCC tanks of any capacity and form mouths of circulating pipes, etc.

M&L for 75mm thick PCC 1:2:4 type B1 (using 40mm graded crushed stone aggregate) as in flooring, finished fair and even without using extra cement including Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed.

S&F magnetic cathcher for kitchen cabinet/ cupboard fixed as in repair complete all as specified and as directed.

M&L fabricating of monkey menace with 10 Nos spikes (05 Nos each side) in GI sheet (size of sheet 400mmx150mmx0.50mm) incl providing of 02 Nos holes for fixing to PVC tank with nut bolts complete all as specified.

Cutting shrubs and tree grown on building ( at any location) including digging out roots, filling holes with cement mortar 1:3 or PCC 1:2:4 type B0 including applying two coats of anti vegetation chemical complete all as specified and as directed.

M&L taking down, chipping and removing the loose, spailt, damaged cement concrete, cement mortar surfaces of RCC columns, beams, walls, chajjas etc and exposing the reinforced cement, wire brushing and claening the exposed steel reinforced bar, apply rust remover over the cleaned re-barsurface wash the re-bar with clean water for removing all rusts fromthe old re-barsurfaces, fixing new reonforcement for strengthen the members as required, applying two coats ofepoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified cement and quartz sand mortar in CM 1:3 mix, 40mm average thick in two coats, with and includingpolymer @10% by weight of cement, including erecting and dismantling steel scafoldingfor carrying out the work upto height of 10m (Appx) complete all as specified and as directed. Note:- (Polymer, new reinforcement and MS section will be measured and paid separately). Make;- Dr fixit/ Sunanda/chemestik/fosrock.

S&F Welded steel wire fabric cut to length fixed to steel members/ reinforecement steel, weight per Sqm n exc 4 Kg complete all as specified and directed.

M&L for point wiring with PVC insulated unsheathed FRLS/FRLSH 1100 volts grade single core muilty stranded copper conductor cables of size 1.5 sqmm for phase & neutral in and including concealed 20/25mm dia PVC medium duty conduits, sheet steel sunken boxes1.2mm thickness covered inculding with 3mm thick plastic laminated sheet for mounting switches, scockets, regulator etc and including 1.5 Sqmm copper conductor PVC insulated and unsheathed multi stranded green cable as earth wire for complete all as specified and directed. (unit rate quoted including cutting chases and making good the disturbed surface to match with the original. Nothing extra shall be paid on this account):-

One light point controlled by one switch/one fan point/one bell or buzzer controlled by one switch.

One socket outlet three pin, 5 Amps on the same board.

One socket outlet three pin, 5 Amps, independent board.

All as per item No 127 here-in-before but controlled by two way switches.

M&L for point wiring using approved colour coding as per IS (For phase and neutral), with copper conductor 2.5 Sqmm (cross section area), single core, multistranded, FRLS/FRLSH, PVC insulated and unsheathed cable 1100 volts grade, confirming to IS 694 drawn in and including PVC concealed medium duty conduit with fittings ISI marked, sheet steel sunken boxes incl 2.5 Sqmm (cross section area) single core, multistranded, FRLS/FRLSH, PVC insulated and un sheathed cable as earth continuity from the earth dolly to sunken boxes and light point 3 pin socket 15/16 Amps complete all as specified and directed.

Taking down aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. and making good disturbed surfaces of walls, floors etc. all as specified.

Switch piano flush type single pole, 230 volts, one way, 5/6 Amps complete all as speciifed.

Switch piano, flush type, single pole, 230 volts, two way, 5/6 Amps.

Switch piano flush type single pole, 230 volts, one way, 15/16 Amps complete all as speciifed.

Socket outlet three pin 5/6 Amp, 230 volts complete all as speciifed.

Socket outlet three pin 15/16 Amp, 230 volts complete all as speciifed.

Ceiling rose 3 phase /PVC/ polycarbonate insulated body complete all as specified.

S&F stepped type electronic fan regulator flush type complete all as specified and directed.

S&F bell push, flush type 6 Amps single phase one way complete all as specified and directed.

S&F electric bell, AC 230 volts, SP Ding Dong type complete all as specified and directed.

Sub main wiring (with approved colour coding as per IS) with 2 single core 10 sqmm FRLS/FRLSH PVC insulated multistranded copper conductor cable 1.1 KV grade (main cable two runs) with and including 20/25mm dia concealed PVC conduits medium duty inclussives of Tee/bends/elbows/reducers and fixing accessories alongwith one run of single core 10 sqmm FRLS/FRLSH PVC insulated flexible stranded copper donductor 1.1 KV grade of earth for earthing with and including taking down old unserviceable submain wiring all as specified and directed. Note : 2 runs of 10 sqmm cable and 1 run of 10 sqmm earth cable shall be measured as one unit.

All as per item No 142 but 3 runs of main cable for phase & one run of neutral. Note :- 3 runs of 10 sqmm cable and 1 run of 10 sqmm earth cable shall be measured as one unit.

S&F LED Batten box type made of CRCA sheet including 1 x 20 watt retro LED tube rods 4 feet long and pre-wired with high efficiency electronic driver and connecting with three core PVC copper flexible cable of size 23/.0076 from ceiling rose to connector block complete all as specified.

All as per item No 144 here-in-before but 1x10 watt capacity and 2 feet long

S&F batten holder bakelite complete all as specified (ISI Marked) complete all as specified and directed.

S&F LED lamp as per sample 9/12 watts complete all as specified.

Taking down ceiling/exshaust fan carefully and refixing of the same complete all as specified and directed.

S&F Bulk head fitting in engineering plastic housing with clear prismatic diffuser 6 watt capacity. Make C&S Cat No CG80IB6 WLED or Equivalent of any make mentioned in Appx 'B'.

Disconnecting the power supply and taking down old unserviceable DBs/junction box/panels etc of any size complete all as specified and directed.

S&F for MCB distribution board having IP-43 protection, powder coated, double door flush mounted complete with locking arrangement suitable for 4 way VTPN with 200 Amps rated busbar 415V AC supply complete all as specified and as directed.

S&F for MCCB 415 volts triple pole and neutral with fixed tharmal magnetic setting breaking capacity 16 KA conforming to IS 13947-2 of 100 Amps complete with proper thimble complete as specified and directed.

All as per item No 152 here-in-before but of 125 Amps.

S&F MCB SP 63 Amps, 240 Volts having breaking capacity 16 KA 'C' characterstic complete all as specified and directed.

S&F MCB single pole ISI marked ISI Marked `C' series working on 240 Volts 50 HZ AC supply for incomming and out going controlling cercuit of capacity 6-32 Amp breaking capacity 10 KA as in repair etc all as specified and directed.

S&F MCB SPN ISI Marked `C' series working on 240 Volts 50 HZ AC supply for incomming and out going controlling circuit of capacity 40 Amp breaking capacity 10 KA as in repair etc all as specified and directed.

S&F MCB TPN 63 Amps, 415 volts having breaking capacity 16 KA as in repair complete all as specified and directed.

S&F MCB DB, with provision for incoming 2 pole (MCB/Isolator) and single phase outgoing, suitable for surfaceand flush mounting, IP 43 protection, double door of metal 8 way complete all as specified and directed.

All as per item No 158 here-in-before but 4 way.

M&L for earthing complete with galvanized steel earth plate electrode size 600x600x6.0mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanized earth lead 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized including GI protection pipe light grade 15mm bore connected to main earth wire on pole light grade 15mm bore connected to main earth wire on poleor control board or main switch and GI pipe medium grade 20mm bore for watering funnel with wire mesh. CI cover with frame, PCC chamber pit with PCC 1:2:4 type B-1 20 mm graded stone aggregate excavation and earth work all as shown in electrical plate No 3 of MES Schedule part I of 2009 connected to earthing test point indicaed including testing on completion all specified & as directed.

S&F epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door) 2 way SPN suitable for MCB DB's 240 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting as in repair complete all as specified and directed.

S&F sheet metal enclosure made out of 2mm thick MS sheet duly painted of size 900mm x 600mm x 250mm, making arrangements for fixing 4 Nos energy meters and 4 x DBs ( two ways) including fixing glass thereon for taking meter readings etc with and incl taking down carefully existing energy meters and refixing at appropriate space complete all as specified and directed.

M/s Om parkash

R K Enterprises

Standard Const. Co.