WELCOME MAINT OF OFFICERs MD ACCN IN AOR OF AGE BR-I UNDER GE(WEST)PATHANKOT

Amount

Demolition of brick work , built in cement mortar or cement lime mortar including all quions, arches, pillars, etc including demolition of precast rcc articles and disposal of debris out of MoD land complete all as specified and directed.

M&L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking outjoints, hacking for key, scrubbing down with water, etc. complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15mm thick in CM 1:4 mixed with liquid water proofing compound on fair faces of brick work ,concrete surface of wall, fin, facia, chajjas, parapet and similar article finished surface even and smooth without using extra cement complete all as specified and directed. Note:-WPC shall be measured and paid separately

M&L for rendering 15mm thick in CM 1:6 mixed with liquid water proofing compound on other than fair faces of brick work ,concrete surface of wall, fin, facia, chajjas, parapet and similar article finished surface even and smooth without using extra cement complete all as specified and directed. Note:-WPC shall be measured and paid separately

M&L for rendering 5mm thick on fair faces of brickwork or concrete surfaces in cement mortar 1:3 as on ceiling complete all as specified and directed.

M&L for preparing newly plastered or unplastered ceiling surfaces and applying three coats of white wash all as specified.

M&L for preparing new plastere or unplastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of newly plastered internally surfaces of wall and applying 02mm thick wall care putty on the surfaces & making the surface absolutely smooth surface and applying one coat of primer (as per manufacturer’s recommendations) on the surfaces and applying two coats of distemper oil emulsion finished without any brush marks on the surface.

Demolition of existing roof treatment of any description such as worm out tarfelt, mortar of any description & any thickness, shrubs/roots ,vegetation, tree, terracing pcc/brick tiles, concrete bedding etc as directed and Cleaning of all foreign material debris etc by brushing and dusting, washing down with water etc ,surface shall be leveled with a layer of 20 mm thick screed bed in CM 1:4 including mixed with water proofing admixture as per manufacturer's instructions and applying roof treatment with 03mm thick APP modified membrane with non-woven polyster reinforcement(center core) with thermal insulation with white mineral gravel finish on upper side of weight not less than 3.5 kg/sqm , laid by torch application method with overlap 100 mm on length side and 100 mm on the width side as per manufacturer's instructions over one coat of approved cold applied bituminous oil based primer (IS-3384) @ 0.30 litre/sqm complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position complete all as specified and directed by Engr-in-Charge.

M&L PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in foundations filling and mass concrete and the like complete all as specified and directed by Engr-in-Charge.

M&L for 100mm thick Cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in subbase finish surface even and rough to received top layer complete all as specified and as directed by Engr-in-Charge.

M&L for 75 mm thick plain cement concrete 1:3:6. type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection complete all as specified and directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises and removing the debris outside from defence land complete all as specified and directed

M&L for joint free non skid coloured Ceramic tiles 07mm to 08mm thick (square/ rectangular) polished, area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for joint free non skid coloured Ceramic tiles in vertical surface such as dado etc 450mmX 300mmX 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles over and including 10mm thick rough cement plaster to receive tiles in CM 1:4 complete all as specified and as directed.

S&F Vitrified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

S&F Vitrified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in vertical/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and including 10mm thick rough cement plaster to receive tiles in CM 1:4 complete all as specified and as directed.

M&L for coloured Glazed ceramic tiles in vertical surface such as dado etc 450mmX 300mmX 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles over and including 10mm thick rough cement plaster to receive tiles in CM 1:4 complete all as specified and as directed.

M&L for 20mm thick granite (pure black) work (table rubbed and polished) in steps, jambs pillars, window cills ,cooking platform and like including pointing in white cement (1:2) using marble dust with admixture of pigments to match with shade or granite over including 15mm thick screed bed or bedding layer in cement mortar 1:6 etc complete all as specified and directed. Note:- The stone slab shall be in one piece over kitchen plateform,window cill and making gas pipe holes 25mm dia with rounded holes and all open edges to be half rounded.

M&L for non abrasive paving (endura) tiles 300mm x 300mm x10mm thick (square/ rectangular) polished, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over & including 15mm screed bed CM 1:4 to match complete all as specified and directed.

Demolition of Roofs, floors (other than ground floors), beams staircases, landing, cooking platform ,chajjas, & similar suspended work cement concrete is reinforced (reinforcement cut as required to facilitate demolition) and disposal of debris out of MoD land complete all as specified and directed. Note:- Demolition will be done only by mechanical cutter only .

M&L for RCC type B-1 (1:2:4) using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like such as cover slab of septic tank/soak well etc complete all as specified and as directed. Note:- Reinforcement shall be measured and paid separately.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200mm thick (Horizontal or sloping) Rough finished surfaces of concrete flat complete all as specified and as directed

M&L for Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and as directed.

Dismanting of Asbestos cement (corrugated, semi corrugated , etc) sheets in roof coverings etc complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F in repairs Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

Dismantling timber scantling 40 Sq cm and over in section, in any position framed work complete all as specified and directed

S &F rolled mild steel (structural steel) any type hollow section as in main and cross beams, hip and jack rafters; purlins where connected to a common rafters and rails and guides for sliding doors; and supports to roof covering, sun-shades,vertical poles etc fixed with angle cleats or other connecting plates Fe-410-W(Gde-E-250) quality B complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer all as specified and directed.

M&L for preparation of old plastered or unplastered, old decoreted surface of wall and applying one coat of distemper oil emulsion paint complete all as specified and as directed.

M&L for preparation of old plastered or unplastered, old decoreted surfaces of wall and applying 02mm thick wall care putty on the surfaces & making the surface absolutely smooth surface and applying one coat of primer (as per manufacturer’s recommendations) on the surfaces and applying two coats of distemper oil emulsion finished without any brush marks on the surface.

M&L for complete removal of existing treatment surface internally surfaces of wall and applying minimum 2mm thick wall care putty on surfaces & making smooth surface and applying one coat of acrylic primer as per manufacturer’s instructions and applying two coat of Acrylic Emulsion paint of premium quality 100% Acrylic complete all as specified and as directed.

M&L for complete removal of existing treatment from ceiling surfaces and applying two coats of white wash complete all as specified.

M&L for complete removal of existing treatment from old plastered or unplastered, old decoreted surface of wall and applying two coats of white wash complete all as specified.

M&L for one coat of synthetic enamel paint on old treated wooden surfaces of any description not otherwise described over 10cm width or grith including preparation of old surfaces complete all as specified and directed by Engr-in-charge

M&L for one coat of synthetic enamel paint on old treated steel & iron surfaces of any description not otherwise described over 10cm width or grith including preparation of old surfaces complete all as specified and directed by Engr-in-charge

Taking down chowkhats or frames exc 1.50 and n.exc 4 Sqm each (without talking off shutters from the freme) complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frames) area not exc1.5 Sqm each and removing from site complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but not exc 2 sqm each and removing from site complete all as specified and directed.

M&L for Pressed steel frames of size 125mmx60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. including back filling of hollow portion of frame including fixing of hold fast with plain cement concrete type c-0, 1:3:6 using 12.5mm graded crushed stone aggregate, complete, as specified

S&F solid PVC door frame of size50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling fixing in opening as per specification & drawing complete all as specified & directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 156 of SSR 2010 (Part-II) complete all as specified & directed.

S&F 35mm thick factory made 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supply and fitted to chowkats complete all as specified and directed.

S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, confirming to IS- 2202(Part-I-1999), ISI Marked complete all as specified and directed

S&F factory made 35mm thick 2nd class hardwood, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-in-Charge.

S&F steel window/Ventilator factory made box type and shutter (double shutter) with sash bar made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings including grills made out of 10 mm dia round bars glazing with 3 mm thick oridinary glass, guaging (wire mesh stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples or using metal nut and bolts ) and two coat synthetic enamel paint over and including a coat of red oxide primer all as per drg No CEPZ/ TD/032/13 Sheet 1/2 including taking out old windows complete all as specified & directed.

S&F 100mm long (ISI Marked), mild steel butt hinges, medium weight, cold rolled complete all as specified and directed by Engr-in-Charge.

S&F 75mm long (ISI Marked), mild steel butt hinges, medium weight, cold rolled complete all as specified and directed by Engr-in-Charge.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or castaluminium alloy and fixed Length of bolt in 250 mm complete all as specified & directed.

S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate including welding to steel frames complete all as specified & directed.

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, Length of bolt in 200mm complete all as specified and directed

S&F Aluminium handles, fabricated type, anodised Size of handle in 150mm complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor Overall length of cover plate 140mm complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples or using metal nut and bolts complete all as specified and directed.

S&F in repair 18/19mm thick Pre-laminated particle board, exterior grade, pre-laminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick teak wood lipping fixed with screws to steel/timber frame work as in shutters & shelf of Kitchen cabinet, cupboard, partition & almirahs etc including taking down old shutters & shelf etc complete all as specified and directed.

S&F in repairs 18mm thick Medium density fibre board one side Prelaminated & other side balancing white with decorative choice, exterior grade, fixed to timber framework with screws as in shutters & shelfs of Kitchen cabinet, cupboard, partition & almirahs etc including taking down existing shutters ,shelfs / boards /cabinets etc complete all as specified and directed

S&F Continuous (piano) hinges 30mm Width of flaps (when open), mild steel, bright finish or electrogalvanised complete all as specified and directed

S&F hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws, Size of hasp and staple in mm 100 complete all as specified and directed.

S&F for Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.

Taking up or down 15mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed.

Taking up or down 20mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed.

S&F 15mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.

S&F 20mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.

Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubing or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified and directed

S&F in repair of powder coated aluminium body rubber door cill strip at bottom rail of door to stop entry of insect inside the room,shape rectangular, brush type polypropylene, water resistant to seal the gap between door and floor fixed with screw/nail complete all as specified and as directed by Engr-in-Charge.

S&F in repair 25mm outer dia stainless steel bright finish, fancy type decorative drapery rod of thickness 20 gauge and for every 01 RM length, provide 10 numbers stainless steel rings with 50 mm dia and proportionate for part there off, with stainless steel brackets near to ends with stainless steel finish for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clear opening of doors/windows including necessary fittings complete all as specified & directed.

Demolition and breaking up drain pipes (Salt glazed ware, PVC/AC or Reinforced concrete) set in cement mortar,and taking out of trenches, if required, Internal dia of pipe in 75mm/100mm complete all as specified and directed

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning for refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints fixed to wall all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints fixed to wall all as specified and directed.

S&F PVC (SWR) bends ISI marked of radius 75mm dia all as specified and directed.

S&F PVC (SWR) bends ISI marked of radius 110mm dia all as specified and directed.

Disconnecting existing tank (or lowering if required) and Cleaning and removing all scale and dirt, etc, from capacity in exc 250 ltr & n.exc 500 ltr tanks and from mouths of circulating pipes, etc. and replacing and fixing broken covers and reconnecting & refixing in same position complete all as specified and as directed. Note:- While cleaning flot valve to be removed and refixed as and where is fixed incase of damage it is to be changed with no extra cost.

S&F Rotational moulded polyethlene water storage tanks three layers of 500 ltrs capacity ISI marked (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm thick Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms including Dismantling of old brocken water tanks and refixing of inlet, outlet & over flow pipe etc complete all as specified and as directed.

S&F Rotational moulded polyethlene water storage tanks three layers of 1000 ltrs capacity ISI marked (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I including Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms including Dismantling of old broken water tanks and refixing of inlet, outlet & over flow pipe etc complete all as specified and as directed.

S&F in repair Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe & fixed. (min. weight 20mm-210 gms) complete all as specified and directed

S&F in repair double bowl sink with 'Y' shaped waste pipe, coupling made of stainless steel 1 mm thick with plugs, washers , including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of angle iron and connecting union to pipe complete all as specified and directed.

S&F in repair Stainless steel plate rack(Utensil Rack) of size (900mm x 750mmx250mm ) made out of AISl 304 stainless steel 0.63 mm thick sheet fixed with brass screw of required size including necessary fittings/nuts,bolts & washers complete all as specified and as directed.

S&F in repair Vitreous China wash down water closet pan including P or S trap of bore 125/110 mm (pedestal pattern), white or in matching colour of tiles (excluding flushing cistern and flush pipe) including plastic water closet seat, white or in matching colour , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and wash down water closet complete all as specified and as directed.

S& F in repair one piece EWC with soft closing seat cover and fittings complete, 710 x 370 x 745 mm, modern curvy design with flushing efficiency 3.90/2.10 LPF complete, the shade of EWC to be approved by Engr in Charge, complete all as specified and directed by Engr-in-Charge.

S&F in repair viterous China squatting pan, `Orissa' pattern, size 580 x440 mm white, witht integral foot rests (excluding flushing cistern and flush pipe) including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor complete all as specified and as directed.

S&F in repair plastic water closet seat cover, of approved colour, closed pattern with flat bottom, and cover with mild steel chromium plated or aluminium hinging device complete all as specified and directed by Engr-in-Charge.

S&F in repairs Viterous China wash basin, white, flat back, size 630x450mm excluding taps etc but including brackets,including cutting for and pinning in ends of brackets or erecting stand and including CP brass waste fitting and PVC waste pipe complete all as specfied and as directed.

S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float and handle including brackets ,fush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specfied and as directed.

S&F in repair 15mm dia 600 mm long PVC connection including brass check nut at both ends screwed both end for iron pipes complete all as specified and directed

S&F in repair 125mm dia CP perforated grating with hole/without hole for waste pipe fixed over floor/nahani trap complete all as specified and directed

S&F in repair for PVC Bathroom cabinet Mirror of size 450mmX350mm wall Mounted, Shape Rectangular fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.

S&F in repairs Tubular towel rail, ISI marked 60cm long between flanges , 20mm dia 'D' type Brass Chromium plated incl brackets, fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F in repair Towel Rack 600mm Long with Lower Hangers, Stainless Steel, fancy type, superior quality complete all as specified and directed.

S&F in repair CP brass towel ring 20mm dia, fancy type, superior quality, including CP screws and wooden/plastic cleats complete all as specified and as directed.

S&F in repair fancy type CP stop cock/angle valve cast copper alloy screwed down high pressure ,with crutch or butterfly handle screwed both ends for iron pipe or for union of 15 mm bore complete all as specified & directed.

S&F in repairs bib tap 15mm bore fancy type chromium plated, cast copper alloy with crutch or butterfly handle screwed down for iron pipes (minimum weight 575 gram) all as specified and as directed.

S&F in repair 15 mm bore long body CP Bib taps cast copper alloy fancy type with crutch or butterfly handle screwed down, high pressure for iron pipe complete all as spd & directed.

S&F in repair stop valves (ISI marked), 15mm dia, cast copper alloy,chromium plated fancy type with long shank and cup(concealed type) screwd down,high pressure with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed in pipe (minimum weight 575 gram) complete all as specified and directed

S&F in repairs Brass CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15mm bore complete all as specified and as directed

S&F in repair 15mm bore brass wall mixer 3-in-1 system with provision for hand shower and overhead shower complete with 115mm long bend pipe, connecting legs & wall flange, mixing hot and cold water, screwd down for 15mm dia iron pipe complete all as specified and directed. Note:-Hand shower and over head shower will be measured and paid separately.

S&F in repair Hand Shower dia 105mm round shape single flow with air effect (ABS body & face plate chrome plated) with rubit cleaning system including shower flxible tubes 8 mm dia,1.5 m long complete all as specified and directed.

S&F in repair over head shower 190mm dia round shape single flow (ABS Body CP with gray face plate) with rubit cleaning system with 190mm long flat shape shower arm chrome plated casted with flange complete all as specified and directed.

S&F in repair Hand Shower (Health Faucet) with 8 mm dia,1.2 m long Flexible Tube Chrome Finish & Wall Hook for Water closet complete all as specified and directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F in repair corner glass shelf with bracket fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.

S&F in repair PVC corner shelf of 3 shelf combination with bracket fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.

S&F in repair chrome finish Toilet paper Roll Holder with fixing arrangement complete all as specified and as directed.

S&F in repair Stainless Steel Soap Dish or Soap Holder Dish for Bathroom with fixing arrangement complete all as specified and as directed.

S&F in repair peg set of 5 pin, stainless steel grade AISI 304, fancy type, superior quality and fixed with screws complete all as specified and directed.

S&F in repairs 75mm PVC floor trap, ISI marked with cp grating with/without waste pipe hole incl jointing to waste pipe fixed with solvent cement complete all as specified and as directed.

Repair to any type of wooden & PVC joinery works such as door, window, ventilator, wardrobes, cupboard, kitchen cabinet of any discription by taking down & refixing in the same opening including re-securing, easening/plaining, adjusting, re-fixing builders hardware, renewal of screws, welding (if required) etc making smooth functioning etc. complete all as specified and as directed.

S&F in repairs CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe (minimum weight 665 gram) complete all as specified and directed.

S&F in repair 15mm bore bib tap with long body 15mm bore standard of PTMT any colour screwed for iron pipe (minimum weight 15mm -120 gram) complete all as specified and directed.

S&F in repair PVC tank lid/cover for water storage tank of 250ltr to 2000 ltrs capacity with fixing arrangement complete all as specified and directed.

S&F in repair 32mm bore PVC waste pipe flexible with minimum length 800mm including cups and socket complete all as specified and directed

S&F in repair 'Y' shaped PVC waste pipe flexible with minimum length 800mm including cups and sockets complete all as specified and directed

S&F in repair for Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of 20 mm bore complete all as specified and as directed by Engr-in-Charge.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples or using metal nut and bolts complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty wire clips in square n.exc 0.5 sqm in each pane upto tripple story building complete all as specified and directed.

S&F 4mm thick figured glass, pin head type and glazing with oil putty in square n-exc 0.5 sqm in each pane upto tripple story building complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F suspended false ceiling system using chicago metallic (E grid) exposed supended system, grid section size 600mm X 600mm comprising of GI powder coated Main Runner of dimensions 39 mm X 24mm X 0.8mm (thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X24mmX0.8mm thick and wall angle 22.2mmX22.2mmX 0.65 mm thick ( thickness comprising of GI/0.35+ PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length)with and including 4mm thick HPSC(High pressure steam cured) pre-primed , self embossed . textured designer board, water resistant termite resistant , fire resistant for insulation to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed purlins of the roof with butterfly clips(Wt-0.007 Kg/clip)hold down clips (Wt-0.0035 Kg/clip) complete all as specified and directed.

Taking down old any type description of heritage, texture finished surface including preparation of surface and M&L for applying heritage/texture finish surface such as fine flakes features/heritage flakes texture features/heritage granite finish/heritage granules finish/heritage surface textures/metallic/stone finishes/natural finishes/super matt paint finish/fine flakes/fine granules etc complete application process as per manufacturer's recommendation in any tint design & pattern as approved by GE including bonding agent & top coat including trowelled on the surface on internal or external surfaces including matching with existing work complete all as specified and directed.

M&L for preparation of old plastered or unplastered ,old decorated surfaces of brick/concrete/stone wall surfaces and applying one coat of cement base paint complete all as specified and as directed.

M&L for preparation of old plastered or unplastered ,old decorated ,heritage ,Texture finished surface of wall/ceiling surface and applying one coats of weather proof exterior emulsion Paint complete all as specified and directed.

S&F in repair plain fillets square, or rectangular or triangular in section clean sawn, secured with nails exc. 13 sqcm and not exc. 25 sqcm in section of 2nd class hard wood wrought and chamfered complete all as specified and directed.

S&F in repair modern furnished vainity type vitreous china wash basin, table top or table fix of size approved by Engg-in-Charge, with granite, marble or laminated ply (sanmika) top finished of any colour, pattern or texture with cabinet type boxes or soft sliding drawers as per recommanded by Engg-in-charge , including angle valve , PVC connections, brackets, CP brass waste fitting 32mm dia, PVC waste pipe 750mm long(minimum) complete all as specified and directed.

S&F powder coated (thickness of powder coating not less than 50 micron) aluminium door shutters, aluminium section weighing 0.55 kg/m including powder coated door frame/chowkhat (not less than 1.25 mm and not less than 85 mm width) including necessary joining cleats, glazing clips, rubber neoprene packing, handles (150mm) 02 Nos in each door, hinges (100 mm) 03 Nos in each door, powder coated aluminum snap beading screws etc. complete all as specified and directed by Engr-in-Charge.

S&F powder coated (thickness of powder coating not less than 50 micron) aluminium window and ventilator shutters, rolling/sliding type without sash bar, aluminium section weighing 0.55 kg/m including powder coated window/ventilator frame/chowkhat (not less than 1.25 mm and not less than 85 mm width) including necessary joining cleats, glazing clips, rubber neoprene packing, handles 01 Nos , hinges, powder coated aluminum snap beading screws, rolling wheel etc. complete all as specified and directed by Engr-in-Charge

S&F powder coated (thickness of powder coating not less than 50 micron) aluminium window and ventilator shutters, side hung type without sash bar, aluminium section weighing 0.55 kg/m including powder coated window/ventilator frame/chowkhat (not less than 1.25 mm and not less than 85 mm width) including necessary joining cleats, glazing clips, rubber neoprene packing, handles 01 Nos , hinges 02 Nos, peg stay 01 nos, powder coated aluminum snap beading screws, rolling wheel etc of suitable size. complete all as specified and directed by Engr-in-Charge.

S&F powder coated (thickness of powder coating not less than 50 micron) aluminium designer grill(weight of grill shall not less than 2.00 KG/Sqm) of 07mm dia and aperture of 75mmx75mm fixed with and including aluminium flat section of size 50mmx1.5mm fixed to aluminium window /ventilator complete all as specified and directed by Engr-in-Charge.

M&L for repair of rolling shuters any size and type including greesing ,welding ,smoothing the movement ,locking system,bearing,over all maintanence including taking down and re-fixing in the same position complete all as specified and directed by Engr-in-Charge.

S&F in repairs of 4 lever brass mortice lock, vertical type, size 100 mm complete all as specified and directed.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass,other parts made of mild steel heavy duty and fixed complete all as directed.

S&F in repair soft closing hydraulic hings(daddu hinges) complete with accessories with screw all as specified and as directed

S&F in repair for coloured vertical/horizentol venetion blinds roll as approved by GE having minimum 75mm width of strip complete with machine and all accessories fixed to wall with screw all as specified and as directed

S&F in repair chrome plated stainless steel wire basket for utensils with necessary fixing clips fixed in cupboard etc complete with all accessories screw all as specified and directed by Engg-in-charge

S&F in repair ball bearing runners 45mm telescopic (KTS-20) full extension load capacity 50 Kgs complete all as specified and as directed.

Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 1,17,373.00 and any other reduction if any from quoted amount.

DABGOTRA BUILDERS (BID ID -3068733)

M/S SATYA SAI CONSTRUCTION (BID ID -3066985)

pardeep singh marwaha (BID ID -3077803)

VAISHNAVI BUILDERS (BID ID -3068663)

GANDOTRA CONSTRUCTION CO (BID ID -3068805)