124 /G/TC/Kanker/ Special Repair work of Residential and Non Residential Building Under P.W.D. (B/R)

Detailed estimate for special repair of High School Building at Badbattar

S.N S.O.R. ITEM No. PARTICULARS MEASUREMENTS QTY. UNIT

Part-I ( dismentling)

1 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.

2 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead..

3 16.7 Removing mortars from stones and concrete articles and cleaning the same. (Stacks of cleaned material shall be measured).

16.7.2 In cement mortar

net qnty 10.27 cum

4 16.37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead.

ceiling class room 5 7.00 5.00 175.00

front lobby 1 8.50 8.20 69.70

teachers room 1 4.00 4.50 18.00

principle 1 4.00 3.40 13.60

Inner side C.R 3x2 7.00 3.50 147.00

net qnty (ceiling+inner side) 619.61 sqm

Part-II ( Repair)

1 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer.

2 8.148 Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge

8.148.1 Extruded section Profile size 48x40 mm.

3 8.149 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws.

8.149.1 24 mm thick door shutters with styles and rails of size 59x24 mm

4 4.13 Grading roof for water proofing treatment with:

4.13.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size)

net qnty 38.52 cum

5 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete:

3.12.1 Thermo-Mechanically treated bars FE 415 qnty as per item no. 4 (repair)

taken 50kg/cum 1925.93 kg

6 11.1 Providing and making 6mm thick cement plaster of mix:

11.1.2 In Cement mortar 1:4 (1 cement : 4 fine sand) qnty as per item no.4 (dismentling) 395.69 sqm

7 11.2 Providing and making 12mm thick cement plaster of mix:

11.2.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) qnty as per item no.4(dismentling) 223.92 sqm

8 14.61 Providing and applying Synthatic oil bound washable Distemper having VOC content less than 50gms/ lit. Minimum two coats up to final finish to give an even shade applied 1.25 kg / 10Sqm as per relevant I.S. Code 428:2000 (product such as Asian Tractor synthatic distemper , Berger Bison Lite , Dulux Magik , Birla Opus Style super smart) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work.

qnty as per item no.7 repair 223.92 sqm

qnty as per item no.6 repair 395.69 sqm

Total 619.61 sqm

9 14.71 Providing and applying satin/ matt finish Enamel paint mimimum 2 coats in all surface applying @ 0.75 lit/ 10 Sqm up to required finish as per relevent I.S. code 2932: 2013 of (Product such as Asian satin Enamel, Dulux Promise Premium Enamel, Nerolac Synthatic Enamel, Opus Prime enamel) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc. complete for the work.

(Part - III) Cost of Dismentling Material L.S.

Detailed estimate for special repair of High School Building at Badbattar

S.N S.O.R. ITEM No. PARTICULARS QTY. UNIT RATE AMOUNT

Part-I ( dismentling)

1 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 10 each 85.00 850.00

2 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.. 11 each 57.00 627.00

3 16.7 Removing mortars from stones and concrete articles and cleaning the same. (Stacks of cleaned material shall be measured).

16.7.2 In cement mortar 10.27 cum 131.00 1345.58

4 16.37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead. 619.61 sqm 9.00 5576.49

Part-II ( Repair)

1 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer. 1994.10 kg 64.00 127622.1312

2 8.148 Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge

8.148.1 Extruded section Profile size 48x40 mm. 16.20 meter 162.00 2624.40

3 8.149 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws.

8.149.1 24 mm thick door shutters with styles and rails of size 59x24 mm 5.04 sqm 2039.00 10276.56

4 4.13 Grading roof for water proofing treatment with:

4.13.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size) 38.52 cum 3244.00 124954.014

5 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete:

3.12.1 Thermo-Mechanically treated bars FE 415 1925.93 kg 46.00 88592.55

6 11.1 Providing and making 6mm thick cement plaster of mix:

11.1.2 In Cement mortar 1:4 (1 cement : 4 fine sand) 395.69 sqm 74.00 29281.06

7 11.2 Providing and making 12mm thick cement plaster of mix:

11.2.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) 223.92 sqm 78.00 17465.76

8 14.61 Providing and applying Synthatic oil bound washable Distemper having VOC content less than 50gms/ lit. Minimum two coats up to final finish to give an even shade applied 1.25 kg / 10Sqm as per relevant I.S. Code 428:2000 (product such as Asian Tractor synthatic distemper , Berger Bison Lite , Dulux Magik , Birla Opus Style super smart) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work. 619.61 sqm 48.00 29741.28

9 14.71 Providing and applying satin/ matt finish Enamel paint mimimum 2 coats in all surface applying @ 0.75 lit/ 10 Sqm up to required finish as per relevent I.S. code 2932: 2013 of (Product such as Asian satin Enamel, Dulux Promise Premium Enamel, Nerolac Synthatic Enamel, Opus Prime enamel) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc. complete for the work. 74.27 sqm 113.00 8392.284

Total for Part II 438950.0392

Total for Part- I & Part II 447349.11

Part-III ( Cost of Dismentling Material) L.S. 3800.00

Net Amount of Repair (Part-I+ II-III ) 443549.11

Say Rs. In Lacs 4.44

G E N E R A L - A B S T R A C T

S. No. Sub-Head Amount

1 Detailed estimate for special repair of High School Building at Badbattar 443549.11

Total 443549.11

Total 523388.11

Say Rs. In Lacs 5.23

GOVT. OF CHHATTISGARH P.W.D. (B/R) DIVISION KONDAGAON

Detailed estimate for special repair of High School Building at Badbattar

FOR TECHNICAL SANCTION ESTIMATED

Cost Rs. 5.23 Lacs

N.I.T. SCHEDULE FOR SPECIAL REPAIR OF HIGH SCHOOL BUILDING AT BADBATTAR

SOR of Building Work for P.W.D. w.e.f. 10-06-2026 PAC 4.47 LACS

S. No. Chapter No Item No Sub Item No Particulars Quantity Unit Rate Amount

1 16 16.26 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 10 each 85.00 850.00

2 16 16.27 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.. 11 each 57.00 627.00

3 16 16.7.2 16.7.2 Removing mortars from stones and concrete articles and cleaning the same. (Stacks of cleaned material shall be measured). In cement mortar 10.27 cum 131.00 1346.00

4 16 16.37 16.37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead. 619.61 cum 9.00 5576.00

5 9 9.13 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer. 1994.10 kg 64.00 127622.00

6 8 8.148.1 8.148.1 Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge Extruded section Profile size 48x40 mm. 16.20 meter 162.00 2624.00

7 8 8.149.1 8.149.1 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. 24 mm thick door shutters with styles and rails of size 59x24 mm 5.04 sqm 2039.00 10277.00

8 4 4.13.1 4.13.1 Grading roof for water proofing treatment with: Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size) 38.52 cum 3244.00 124954.00

9 3 3.12.1 3.12.1 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete: Thermo-Mechanically treated bars FE 415 1925.93 kg 46.00 88593.00

10 11 11.1.2 11.1.2 Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand) 395.69 sqm 74.00 29281.00

11 11 11.2.4 11.2.4 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 223.92 sqm 78.00 17466.00

12 14 14.61 14.61 Providing and applying Synthatic oil bound washable Distemper having VOC content less than 50gms/ lit. Minimum two coats up to final finish to give an even shade applied 1.25 kg / 10Sqm as per relevant I.S. Code 428:2000 (product such as Asian Tractor synthatic distemper , Berger Bison Lite , Dulux Magik , Birla Opus Style super smart) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work. 619.61 sqm 48.00 29741.00

13 14 14.71 14.71 Providing and applying satin/ matt finish Enamel paint mimimum 2 coats in all surface applying @ 0.75 lit/ 10 Sqm up to required finish as per relevent I.S. code 2932: 2013 of (Product such as Asian satin Enamel, Dulux Promise Premium Enamel, Nerolac Synthatic Enamel, Opus Prime enamel) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc. complete for the work. 74.27 sqm 113.00 8392.00

To enable entering data into the sheet, please click on 'Enable Editing'.

Please insert items from 12th row.

Every row will be considered as a distinct item.

The row, in which the two fields- 'Item Code' and 'Description' are blank, will not be considered.

If 'CREDIT ITEM' is not entered, default value '0' will be taken.

If 'Calc Field' is not entered, default value 'N' will be taken.

MAX ITEM LIMIT IN EACH EXCEL FILE IS 1000

Name of work:- SPECIAL REPAIR OF HIGH SCHOOL BUILDING AT BADBATTAR

S. No. Department SOR Year S.OR. Item No. ITEM DESCRIPTION Quantity Rate Unit Amount Serial no. Credit item (0/1) Field (Y/N) Reserve EMD Amount

1 PWD BUILDING 2026 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 10 85.00 each 850.00 0 N 0 0

2 PWD BUILDING 2026 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.. 11 57.00 each 627.00 0 N 0 0

3 PWD BUILDING 2026 16.7.2 Removing mortars from stones and concrete articles and cleaning the same. (Stacks of cleaned material shall be measured). In cement mortar 10 131.00 cum 1346.00 0 N 0 0

4 PWD BUILDING 2026 16.37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead. 620 9.00 cum 5576.00 0 N 0 0

5 PWD BUILDING 2026 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer. 1994 64.00 kg 127622.00 i 0 N 0 0

6 PWD BUILDING 2026 8.148.1 Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge Extruded section Profile size 48x40 mm. 16 162.00 meter 2624.00 0 N 0 0

7 PWD BUILDING 2026 8.149.1 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. 24 mm thick door shutters with styles and rails of size 59x24 mm 5 2039.00 sqm 10277.00 0 N 0 0

8 PWD BUILDING 2026 4.13.1 Grading roof for water proofing treatment with: Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size) 39 3244.00 cum 124954.00 0 N 0 0

9 PWD BUILDING 2026 3.12.1 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete: Thermo-Mechanically treated bars FE 415 1926 46.00 kg 88593.00 0 N 0 0

10 PWD BUILDING 2026 11.1.2 Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand) 396 74.00 sqm 29281.00 0 N 0 0

11 PWD BUILDING 2026 11.2.4 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 224 78.00 sqm 17466.00 0 N 0 0

12 PWD BUILDING 2026 14.61 Providing and applying Synthatic oil bound washable Distemper having VOC content less than 50gms/ lit. Minimum two coats up to final finish to give an even shade applied 1.25 kg / 10Sqm as per relevant I.S. Code 428:2000 (product such as Asian Tractor synthatic distemper , Berger Bison Lite , Dulux Magik , Birla Opus Style super smart) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work. 620 48.00 sqm 29741.00 0 N 0 0

13 PWD BUILDING 2026 14.71 Providing and applying satin/ matt finish Enamel paint mimimum 2 coats in all surface applying @ 0.75 lit/ 10 Sqm up to required finish as per relevent I.S. code 2932: 2013 of (Product such as Asian satin Enamel, Dulux Promise Premium Enamel, Nerolac Synthatic Enamel, Opus Prime enamel) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc. complete for the work. 74 113.00 sqm 8392.00 0 N 0 0

Say in Lacs 4.47

Detailed estimate for special repair of High secondary School Building at Arandi

S.N S.O.R. ITEM No. PARTICULARS MEASUREMENTS QTY. UNIT

Part-I ( dismentling)

1 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.

2 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead..

3 16.7 Removing mortars from stones and concrete articles and cleaning the same. (Stacks of cleaned material shall be measured).

16.7.2 In cement mortar

net qnty 8.99 cum

4 16.37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead.

ceiling class room 5 7.00 5.00 175.00

front lobby 1 8.50 8.20 69.70

teachers room 1 4.00 4.50 18.00

principle 1 4.00 3.40 13.60

Inner side C.R 5x2 7.00 3.5 245.00

net qnty (ceiling+inner side) 675.99 sqm

Part-II ( Repair)

1 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer.

2 8.148 Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge

8.148.1 Extruded section Profile size 48x40 mm.

3 8.149 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws.

8.149.1 24 mm thick door shutters with styles and rails of size 59x24 mm

4 4.13 Grading roof for water proofing treatment with:

4.13.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size)

net qnty 33.72 cum

5 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete:

3.12.1 Thermo-Mechanically treated bars FE 415 qnty as per item no. 4(repair)

taken 50kg/cum 1686.00 kg

6 11.1 Providing and making 6mm thick cement plaster of mix:

11.1.2 In Cement mortar 1:4 (1 cement : 4 fine sand) qnty as per item no.4 (dismentling) 317.19 sqm

7 11.2 Providing and making 12mm thick cement plaster of mix:

11.2.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) qnty as per item no.4(dismentling) 358.80 sqm

8 14.61 Providing and applying Synthatic oil bound washable Distemper having VOC content less than 50gms/ lit. Minimum two coats up to final finish to give an even shade applied 1.25 kg / 10Sqm as per relevant I.S. Code 428:2000 (product such as Asian Tractor synthatic distemper , Berger Bison Lite , Dulux Magik , Birla Opus Style super smart) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work.

qnty as per item no.7 repair 358.80 sqm

qnty as per item no.6 repair 317.19 sqm

9 14.71 Providing and applying satin/ matt finish Enamel paint mimimum 2 coats in all surface applying @ 0.75 lit/ 10 Sqm up to required finish as per relevent I.S. code 2932: 2013 of (Product such as Asian satin Enamel, Dulux Promise Premium Enamel, Nerolac Synthatic Enamel, Opus Prime enamel) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc. complete for the work.

(Part - III) Cost of Dismentling Material L.S.

Detailed estimate for special repair of High secondary School Building at Arandi

S.N S.O.R. ITEM No. PARTICULARS QTY. UNIT RATE AMOUNT

Part-I ( dismentling)

1 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 12 each 85.00 1020.00

2 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.. 13 each 57.00 741.00

3 16.7 Removing mortars from stones and concrete articles and cleaning the same. (Stacks of cleaned material shall be measured).

16.7.2 In cement mortar 8.99 cum 131.00 1177.95

4 16.37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead. 675.99 sqm 9.00 6083.91

Part-II ( Repair)

1 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer. 2301.26 kg 64.00 147280.6272

2 8.148 Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge

8.148.1 Extruded section Profile size 48x40 mm. 16.20 meter 162.00 2624.4

3 8.149 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws.

8.149.1 24 mm thick door shutters with styles and rails of size 59x24 mm 5.04 sqm 2039.00 10276.56

4 4.13 Grading roof for water proofing treatment with:

4.13.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size) 33.72 cum 3244.00 109387.68

5 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete:

3.12.1 Thermo-Mechanically treated bars FE 415 1686.00 kg 46.00 77556

6 11.1 Providing and making 6mm thick cement plaster of mix:

11.1.2 In Cement mortar 1:4 (1 cement : 4 fine sand) 317.19 sqm 74.00 23472.06

7 11.2 Providing and making 12mm thick cement plaster of mix:

11.2.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) 358.80 sqm 78.00 27986.4

8 14.61 Providing and applying Synthatic oil bound washable Distemper having VOC content less than 50gms/ lit. Minimum two coats up to final finish to give an even shade applied 1.25 kg / 10Sqm as per relevant I.S. Code 428:2000 (product such as Asian Tractor synthatic distemper , Berger Bison Lite , Dulux Magik , Birla Opus Style super smart) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work. 675.99 sqm 48.00 32447.52

9 14.71 Providing and applying satin/ matt finish Enamel paint mimimum 2 coats in all surface applying @ 0.75 lit/ 10 Sqm up to required finish as per relevent I.S. code 2932: 2013 of (Product such as Asian satin Enamel, Dulux Promise Premium Enamel, Nerolac Synthatic Enamel, Opus Prime enamel) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc. complete for the work. 91.43 sqm 113.00 10331.364

Total for Part II 441362.6112

Total for Part- I & Part II 450385.47

Part-III ( Cost of Dismentling Material) L.S. 3500.00

Net Amount of Repair (Part-I+ II-III ) 446885.47

Say Rs. In Lacs 4.47

Detailed estimate for special repair of I-1 type quarter at Dhanora

S.N S.O.R. ITEM No. PARTICULARS MEASUREMENTS QTY. UNIT

Part-I ( dismentling )

1 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.

2 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead..

3 16.7 Removing mortars from stones and concrete articles and cleaning the same. (Stacks of cleaned material shall be measured).

16.7.2 In cement mortar

main bld. slab 1 5.85 7.60 0.03 1.11

Part-II ( Repair)

1 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer.

@35.80KG/SQM 449.65 kg

2 4.22 Providing Water proofing treatment over Roof, Wall, Chhajjas, Balcony with Diamond Shield and Sealer coat or equivalent at leakage/ seepage area consisting of the operation:

(i) Surface preparation roughening of surface, opening of cracks in ‘V’ groove in size of 5mm x 10m (WxD), filling of cracks with putty of Diamond shield with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/ Nylon brush. Removing all dust particles and washing with adequate water to clean completely.

(ii) Providing and applying 1st coat of diamond shield or equivalent compound (having two component dry powder 80% Chemical 20% (chemical having 30% solid contents) making flexible waterproof and protective modified mortar with minimum thickness 70-80 micron after proper mixing of both the parts of compound along with laying of fiber glass mesh (of weaving size of 10x10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to set in natural air for minimum 2 Hrs. After 1st coat apply 2nd coat with minimum thickness 100 micron of the same compound. Allow the 2nd coat to set in natural air for minimum 4 Hrs. Total consumption of the diamond shield or equivalent in both coat should be @ 17.90 kg for 10sqm area. 0

(iii) Over the above layers providing and applying 1st coat of sealer compound (Single component High Build elastomeric, flexible, pure acrylic waterproofing membranes having solid content of 65%) minimum 50-60 micron and allow it to set in natural air for minimum 2 Hrs. After 1st coat apply 2nd and final coat 120-140 micron of sealer compound and allow it to set in natural air for minimum 4 Hrs. Consumption of Sealer compound should be @ 5.40 kg per 10 sqm area. The final area appearance of the coating will be milky white. 0

(iv) The treated area should be cure with water for 48 hrs by flooding the surface. All above operations to be done in order. 0 421 0

main bld. slab 1 5.85 7.60 44.46

toilet & bath 1 1.85 3.70

3 14.22 Painting on new work (two or more coats) to give an even shade with:

14.22.1 Satin synthetic enamel paint

4 14.23 Painting on old work (one or more coats) to give an even shade with:

14.23.1 Satin synthetic enamel paint

(Part - III) Cost of Dismentling Material L.S.

Part-III ( Cost of Dismentling Material) L.S.

3 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete:

3.12.1 Thermo-Mechanically treated bars FE 415

qnty as per item no.2 repair

3.85cum.x50.0kg/cum 0 kg

4 3.14 Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer. qnty as per item no.2 repair

3.85cum.x 6.35 begs/kg 0.00 kg

Detailed estimate for special repair of I-1 type quarter at Dhanora

S.N S.O.R. ITEM No. PARTICULARS QTY. UNIT RATE AMOUNT

Part-I ( dismentling)

1 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 6 each 100.00 600.00

2 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.. 2 each 66.50 133.00

3 16.7 Removing mortars from stones and concrete articles and cleaning the same. (Stacks of cleaned material shall be measured).

16.7.2 In cement mortar 1.32 cum 154.00 202.79

Part-II ( Repair)

1 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer.

2 4.22 Providing Water proofing treatment over Roof, Wall, Chhajjas, Balcony with Diamond Shield and Sealer coat or equivalent at leakage/ seepage area consisting of the operation:

(i) Surface preparation roughening of surface, opening of cracks in ‘V’ groove in size of 5mm x 10m (WxD), filling of cracks with putty of Diamond shield with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/ Nylon brush. Removing all dust particles and washing with adequate water to clean completely.

(ii) Providing and applying 1st coat of diamond shield or equivalent compound (having two component dry powder 80% Chemical 20% (chemical having 30% solid contents) making flexible waterproof and protective modified mortar with minimum thickness 70-80 micron after proper mixing of both the parts of compound along with laying of fiber glass mesh (of weaving size of 10x10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to set in natural air for minimum 2 Hrs. After 1st coat apply 2nd coat with minimum thickness 100 micron of the same compound. Allow the 2nd coat to set in natural air for minimum 4 Hrs. Total consumption of the diamond shield or equivalent in both coat should be @ 17.90 kg for 10sqm area.

(iii) Over the above layers providing and applying 1st coat of sealer compound (Single component High Build elastomeric, flexible, pure acrylic waterproofing membranes having solid content of 65%) minimum 50-60 micron and allow it to set in natural air for minimum 2 Hrs. After 1st coat apply 2nd and final coat 120-140 micron of sealer compound and allow it to set in natural air for minimum 4 Hrs. Consumption of Sealer compound should be @ 5.40 kg per 10 sqm area. The final area appearance of the coating will be milky white.

(iv) The treated area should be cure with water for 48 hrs by flooding the surface. All above operations to be done in order. 44.46 sqm 421.00 18717.66

3 14.22 Painting on new work (two or more coats) to give an even shade with:

14.22.1 Satin synthetic enamel paint 34.30 sqm 55.00 1886.50

4 14.23 Painting on old work (one or more coats) to give an even shade with:

14.23.1 Satin synthetic enamel paint 23.95 sqm 35.00 838.25

Total for Part II 55166.01

Total for Part- I & Part II 56101.80

Part-III ( Cost of Dismentling Material) L.S. 6500.00

Net Amount of Repair (Part-I+ II-III ) 49601.80

Say rs. 0.496 Lacs.

Detailed estimate for special repair of I-2 type quarter at Dhanora

S.N S.O.R. ITEM No. PARTICULARS MEASUREMENTS QTY. UNIT

Part-I ( dismentling)

1 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.

2 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead..

3 16.7 Removing mortars from stones and concrete articles and cleaning the same. (Stacks of cleaned material shall be measured).

16.7.2 In cement mortar

main bld. slab 1 5.85 7.60 0.03 1.11

Part-II ( Repair)

1 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer.

@35.80KG/SQM 423.87 kg

2 4.22 Providing Water proofing treatment over Roof, Wall, Chhajjas, Balcony with Diamond Shield and Sealer coat or equivalent at leakage/ seepage area consisting of the operation:

(i) Surface preparation roughening of surface, opening of cracks in ‘V’ groove in size of 5mm x 10m (WxD), filling of cracks with putty of Diamond shield with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/ Nylon brush. Removing all dust particles and washing with adequate water to clean completely.

(ii) Providing and applying 1st coat of diamond shield or equivalent compound (having two component dry powder 80% Chemical 20% (chemical having 30% solid contents) making flexible waterproof and protective modified mortar with minimum thickness 70-80 micron after proper mixing of both the parts of compound along with laying of fiber glass mesh (of weaving size of 10x10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to set in natural air for minimum 2 Hrs. After 1st coat apply 2nd coat with minimum thickness 100 micron of the same compound. Allow the 2nd coat to set in natural air for minimum 4 Hrs. Total consumption of the diamond shield or equivalent in both coat should be @ 17.90 kg for 10sqm area. 0

(iii) Over the above layers providing and applying 1st coat of sealer compound (Single component High Build elastomeric, flexible, pure acrylic waterproofing membranes having solid content of 65%) minimum 50-60 micron and allow it to set in natural air for minimum 2 Hrs. After 1st coat apply 2nd and final coat 120-140 micron of sealer compound and allow it to set in natural air for minimum 4 Hrs. Consumption of Sealer compound should be @ 5.40 kg per 10 sqm area. The final area appearance of the coating will be milky white. 0

(iv) The treated area should be cure with water for 48 hrs by flooding the surface. All above operations to be done in order. 0 421 0

main bld. slab 1 5.85 7.60 44.46

toilet & bath 1 1.85 3.70 6.845

3 14.22 Painting on new work (two or more coats) to give an even shade with:

14.22.1 Satin synthetic enamel paint

4 14.23 Painting on old work (one or more coats) to give an even shade with:

14.23.1 Satin synthetic enamel paint

(Part - III) Cost of Dismentling Material L.S.

Part-III ( Cost of Dismentling Material) L.S.

3 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete:

3.12.1 Thermo-Mechanically treated bars FE 415

qnty as per item no.2 repair

3.85cum.x50.0kg/cum 0 kg

4 3.14 Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer. qnty as per item no.2 repair

3.85cum.x 6.35 begs/kg 0.00 kg

Detailed estimate for special repair of I-2 type quarter at Dhanora

S.N S.O.R. ITEM No. PARTICULARS QTY. UNIT RATE AMOUNT

Part-I ( dismentling)

1 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 4 each 100.00 400.00

2 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.. 3 each 66.50 199.50

3 16.7 Removing mortars from stones and concrete articles and cleaning the same. (Stacks of cleaned material shall be measured).

16.7.2 In cement mortar 1.11 cum 154.00 171.17

Part-II ( Repair)

1 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer.

2 4.22 Providing Water proofing treatment over Roof, Wall, Chhajjas, Balcony with Diamond Shield and Sealer coat or equivalent at leakage/ seepage area consisting of the operation:

(i) Surface preparation roughening of surface, opening of cracks in ‘V’ groove in size of 5mm x 10m (WxD), filling of cracks with putty of Diamond shield with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/ Nylon brush. Removing all dust particles and washing with adequate water to clean completely.

(ii) Providing and applying 1st coat of diamond shield or equivalent compound (having two component dry powder 80% Chemical 20% (chemical having 30% solid contents) making flexible waterproof and protective modified mortar with minimum thickness 70-80 micron after proper mixing of both the parts of compound along with laying of fiber glass mesh (of weaving size of 10x10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to set in natural air for minimum 2 Hrs. After 1st coat apply 2nd coat with minimum thickness 100 micron of the same compound. Allow the 2nd coat to set in natural air for minimum 4 Hrs. Total consumption of the diamond shield or equivalent in both coat should be @ 17.90 kg for 10sqm area.

(iii) Over the above layers providing and applying 1st coat of sealer compound (Single component High Build elastomeric, flexible, pure acrylic waterproofing membranes having solid content of 65%) minimum 50-60 micron and allow it to set in natural air for minimum 2 Hrs. After 1st coat apply 2nd and final coat 120-140 micron of sealer compound and allow it to set in natural air for minimum 4 Hrs. Consumption of Sealer compound should be @ 5.40 kg per 10 sqm area. The final area appearance of the coating will be milky white.

(iv) The treated area should be cure with water for 48 hrs by flooding the surface. All above operations to be done in order. 51.31 sqm 421.00 21599.41

3 14.22 Painting on new work (two or more coats) to give an even shade with: 0.00

14.22.1 Satin synthetic enamel paint 23.73 sqm 55.00 1304.88

4 14.23 Painting on old work (one or more coats) to give an even shade with: 0.00

14.23.1 Satin synthetic enamel paint 27.78 sqm 35.00 972.13

Total for Part II 55666.81

Total for Part- I & Part II 56437.48

Part-III ( Cost of Dismentling Material) L.S. 6700.00

Net Amount of Repair (Part-I+ II-III ) 49737.48

Say rs. 0.497 Lacs.

Detailed estimate for special repair of H-1 type quarter at Dhanora

S.N S.O.R. ITEM No. PARTICULARS MEASUREMENTS QTY. UNIT

Part-I ( dismentling)

1 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.

2 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead..

3 16.7 Removing mortars from stones and concrete articles and cleaning the same. (Stacks of cleaned material shall be measured).

16.7.2 In cement mortar

main bld. slab 1 7.80 7.30 0.03 1.42

Part-II ( Repair)

1 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer.

@35.80KG/SQM 763.256 kg kg

@ 8.00 kg/sqm 23.04 kg

Total 786.30 kg

2 8.148 Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge

8.148.1 Extruded section Profile size 48x40 mm.

D3 2 4.80 9.60 meter

3 8.149 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws.

8.149.1 24 mm thick door shutters with styles and rails of size 59x24 mm

4 4.13 Grading roof for water proofing treatment with:

4.13.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size)

5 3.14 Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer. QNTY AS PER ITEM NO.4 REPAIR

@ 6.35 BEGS/KG 30.38 KG

6 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete: QNTY AS PER ITEM NO.4 REPAIR

3.12.1 Thermo-Mechanically treated bars FE 415 @ 50KG/CUM 239.19 KG

7 14.22 Painting on new work (two or more coats) to give an even shade with:

14.22.1 Satin synthetic enamel paint

(Part - III) Cost of Dismentling Material L.S.

Part-III ( Cost of Dismentling Material) L.S.

3 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete:

3.12.1 Thermo-Mechanically treated bars FE 415

qnty as per item no.2 repair

3.85cum.x50.0kg/cum #REF! kg

4 3.14 Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer. qnty as per item no.2 repair

3.85cum.x 6.35 begs/kg #REF! kg

Detailed estimate for special repair of H-1 type quarter at Dhanora

S.N S.O.R. ITEM No. PARTICULARS QTY. UNIT RATE AMOUNT

Part-I ( dismentling)

1 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 8 each 100.00 800.00

2 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.. 12 each 66.50 798.00

3 16.7 Removing mortars from stones and concrete articles and cleaning the same. (Stacks of cleaned material shall be measured).

16.7.2 In cement mortar 1.63 cum 154.00 250.84

Part-II ( Repair)

1 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer.

2 8.148 Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge

8.148.1 Extruded section Profile size 48x40 mm. 9.60 meter 191.00 1833.60

3 8.149 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws.

8.149.1 24 mm thick door shutters with styles and rails of size 59x24 mm 3.20 sqm 2399.00 7676.80

4 4.13 Grading roof for water proofing treatment with:

4.13.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size) 4.78 cum 3817.00 18260.05

5 3.14 Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer. 30.38 kg 43.50 1321.43

6 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete:

3.12.1 Thermo-Mechanically treated bars FE 415 239.19 kg 54.50 13036.06

7 14.22 Painting on new work (two or more coats) to give an even shade with:

14.22.1 Satin synthetic enamel paint 51.55 sqm 55.00 2835.25

Total for Part II 103935.39

Total for Part- I & Part II 105784.23

Part-III ( Cost of Dismentling Material) L.S. 5800.00

Net Amount of Repair (Part-I+ II-III ) 99984.23

Say rs. 1.00 Lacs.

Detailed estimate for special repair of H-4 type quarter at Dhanora

S.N S.O.R. ITEM No. PARTICULARS MEASUREMENTS QTY. UNIT

Part-I ( dismentling)

1 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.

2 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead..

3 16.7 Removing mortars from stones and concrete articles and cleaning the same. (Stacks of cleaned material shall be measured).

16.7.2 In cement mortar

main bld. slab 1 7.80 7.30 0.03 1.42

Part-II ( Repair)

1 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer.

@35.80KG/SQM 698.816 kg kg

@ 8.00 kg/sqm 15.36 kg

Total 714.18 kg

2 8.148 Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge

8.148.1 Extruded section Profile size 48x40 mm.

D3 2 4.80 9.60 meter

3 8.149 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws.

8.149.1 24 mm thick door shutters with styles and rails of size 59x24 mm

4 4.13 Grading roof for water proofing treatment with:

4.13.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size)

5 3.14 Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer. QNTY AS PER ITEM NO.4 REPAIR

@ 6.35 BEGS/KG 30.38 KG

6 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete: QNTY AS PER ITEM NO.4 REPAIR

3.12.1 Thermo-Mechanically treated bars FE 415 @ 50KG/CUM 239.19 KG

7 14.22 Painting on new work (two or more coats) to give an even shade with:

14.22.1 Satin synthetic enamel paint

(Part - III) Cost of Dismentling Material L.S.

Part-III ( Cost of Dismentling Material) L.S.

3 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete:

3.12.1 Thermo-Mechanically treated bars FE 415

qnty as per item no.2 repair

3.85cum.x50.0kg/cum #REF! kg

4 3.14 Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer. qnty as per item no.2 repair

3.85cum.x 6.35 begs/kg #REF! kg

Detailed estimate for special repair of H-4 type quarter at Dhanora

S.N S.O.R. ITEM No. PARTICULARS QTY. UNIT RATE AMOUNT

Part-I ( dismentling)

1 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 6 each 100.00 600.00

2 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.. 10 each 66.50 665.00

3 16.7 Removing mortars from stones and concrete articles and cleaning the same. (Stacks of cleaned material shall be measured).

16.7.2 In cement mortar 1.63 cum 154.00 250.84

Part-II ( Repair)

1 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer.

2 8.148 Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge

8.148.1 Extruded section Profile size 48x40 mm. 9.60 meter 191.00 1833.60

3 8.149 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws.

8.149.1 24 mm thick door shutters with styles and rails of size 59x24 mm 3.20 sqm 2399.00 7676.80

4 4.13 Grading roof for water proofing treatment with:

4.13.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size) 4.78 cum 3817.00 18260.05

5 3.14 Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer. 30.38 kg 43.50 1321.43

6 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete:

3.12.1 Thermo-Mechanically treated bars FE 415 239.19 kg 54.50 13036.06

7 14.22 Painting on new work (two or more coats) to give an even shade with:

14.22.1 Satin synthetic enamel paint 47.95 sqm 55.00 2637.25

Total for Part II 98328.39

Total for Part- I & Part II 99844.23

Part-III ( Cost of Dismentling Material) L.S. 3900.00

Net Amount of Repair (Part-I+ II-III ) 95944.23

Say rs. 0.96 Lacs.

Detailed estimate for special repair of H-4 type quarter at Dhanora

S.N S.O.R. ITEM No. PARTICULARS MEASUREMENTS QTY. UNIT

Part-I ( dismentling)

1 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.

2 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead..

3 16.7 Removing mortars from stones and concrete articles and cleaning the same. (Stacks of cleaned material shall be measured).

16.7.2 In cement mortar

main bld. slab 1 7.80 7.30 0.03 1.42

Part-II ( Repair)

1 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer.

@35.80KG/SQM 763.256 kg kg

@ 8.00 kg/sqm 19.20 kg

Total 782.46 kg

2 8.148 Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge

8.148.1 Extruded section Profile size 48x40 mm.

D3 2 4.80 9.60 meter

3 8.149 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws.

8.149.1 24 mm thick door shutters with styles and rails of size 59x24 mm

4 4.13 Grading roof for water proofing treatment with:

4.13.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size)

5 3.14 Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer. QNTY AS PER ITEM NO.4 REPAIR

@ 6.35 BEGS/KG 30.38 KG

6 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete: QNTY AS PER ITEM NO.4 REPAIR

3.12.1 Thermo-Mechanically treated bars FE 415 @ 50KG/CUM 239.19 KG

7 14.22 Painting on new work (two or more coats) to give an even shade with:

14.22.1 Satin synthetic enamel paint

(Part - III) Cost of Dismentling Material L.S.

Part-III ( Cost of Dismentling Material) L.S.

3 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete:

3.12.1 Thermo-Mechanically treated bars FE 415

qnty as per item no.2 repair

3.85cum.x50.0kg/cum #REF! kg

4 3.14 Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer. qnty as per item no.2 repair

3.85cum.x 6.35 begs/kg #REF! kg

Detailed estimate for special repair of H-4 type quarter at Dhanora

S.N S.O.R. ITEM No. PARTICULARS QTY. UNIT RATE AMOUNT

Part-I ( dismentling)

1 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 7 each 100.00 700.00

2 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.. 11 each 66.50 731.50

3 16.7 Removing mortars from stones and concrete articles and cleaning the same. (Stacks of cleaned material shall be measured).

16.7.2 In cement mortar 1.63 cum 154.00 250.84

Part-II ( Repair)

1 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer.

2 8.148 Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge

8.148.1 Extruded section Profile size 48x40 mm. 9.60 meter 191.00 1833.60

3 8.149 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws.

8.149.1 24 mm thick door shutters with styles and rails of size 59x24 mm 3.20 sqm 2399.00 7676.80

4 4.13 Grading roof for water proofing treatment with:

4.13.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size) 4.78 cum 3817.00 18260.05

5 3.14 Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer. 30.38 kg 43.50 1321.43

6 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete:

3.12.1 Thermo-Mechanically treated bars FE 415 239.19 kg 54.50 13036.06

7 14.22 Painting on new work (two or more coats) to give an even shade with:

14.22.1 Satin synthetic enamel paint 51.55 sqm 55.00 2835.25

Total for Part II 103647.39

Total for Part- I & Part II 105329.73

Part-III ( Cost of Dismentling Material) L.S. 5500.00

Net Amount of Repair (Part-I+ II-III ) 99829.73

Say rs. 0.998 Lacs.

Detailed estimate for special repair of G-1 type quarter at Dhanora

S.N S.O.R. ITEM No. PARTICULARS MEASUREMENTS QTY. UNIT

Part-I ( dismentling)

1 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.

2 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead..

3 16.7 Removing mortars from stones and concrete articles and cleaning the same. (Stacks of cleaned material shall be measured).

16.7.2 In cement mortar

Part-II ( Repair)

1 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer.

@35.80KG/SQM 602.872 kg kg

2 8.148 Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge

8.148.1 Extruded section Profile size 48x40 mm.

D3 2 4.80 9.60 meter

3 8.149 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws.

8.149.1 24 mm thick door shutters with styles and rails of size 59x24 mm

4 4.13 Grading roof for water proofing treatment with:

4.13.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size)

5 3.14 Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer. QNTY AS PER ITEM NO.4 REPAIR

@ 6.35 BEGS/KG 46.93 KG

6 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete: QNTY AS PER ITEM NO.4 REPAIR

3.12.1 Thermo-Mechanically treated bars FE 415 @ 40KG/CUM 295.60 KG

7 14.22 Painting on new work (two or more coats) to give an even shade with:

14.22.1 Satin synthetic enamel paint

(Part - III) Cost of Dismentling Material L.S.

Part-III ( Cost of Dismentling Material) L.S.

3 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete:

3.12.1 Thermo-Mechanically treated bars FE 415

qnty as per item no.2 repair

3.85cum.x50.0kg/cum #REF! kg

4 3.14 Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer. qnty as per item no.2 repair

3.85cum.x 6.35 begs/kg #REF! kg

Detailed estimate for special repair of G-1 type quarter at Dhanora

S.N S.O.R. ITEM No. PARTICULARS QTY. UNIT RATE AMOUNT

Part-I ( dismentling)

1 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 6 each 100.00 600.00

2 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.. 5 each 66.50 332.50

3 16.7 Removing mortars from stones and concrete articles and cleaning the same. (Stacks of cleaned material shall be measured).

16.7.2 In cement mortar 1.97 cum 154.00 303.48

Part-II ( Repair)

1 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer.

2 8.148 Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge

8.148.1 Extruded section Profile size 48x40 mm. 9.60 meter 191.00 1833.60

3 8.149 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws.

8.149.1 24 mm thick door shutters with styles and rails of size 59x24 mm 3.20 sqm 2399.00 7676.80

4 4.13 Grading roof for water proofing treatment with:

4.13.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size) 7.39 cum 3817.00 28207.39

5 3.14 Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer. 46.93 kg 43.50 2041.29

6 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete:

3.12.1 Thermo-Mechanically treated bars FE 415 295.60 kg 54.50 16110.06

7 14.22 Painting on new work (two or more coats) to give an even shade with:

14.22.1 Satin synthetic enamel paint 47.76 sqm 55.00 2626.80

Total for Part II 103711.34

Total for Part- I & Part II 104947.32

Part-III ( Cost of Dismentling Material) L.S. 5000.00

Net Amount of Repair (Part-I+ II-III ) 99947.32

Say rs. 0.999 Lacs.

Detailed estimate for special repair of R.E.S. - 1 type quarter at Dhanora Under Sub-Division Keshkal

S.N S.O.R. ITEM No. PARTICULARS MEASUREMENTS QTY. UNIT

Part-I ( dismentling)

1 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.

2 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead..

3 16.7 Removing mortars from stones and concrete articles and cleaning the same. (Stacks of cleaned material shall be measured).

16.7.2 In cement mortar

main bld. slab 1 6.15 6.50 0.02 0.80

deduction 1 1.8 1.85 0.02 0.07

net qnty 0.87 cum

4 16.37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead.

( inner side) bed 1 2 2.60 3.3 17.16

toilet & bath 1 2 1.10 3.3 7.26

net qnty 150.41

net qnty 55.83 sqm

G.T. 232.44 sqm

Part-II ( Repair)

1 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer.

@30.89 KG/SQM 475.71 kg kg

2 8.148 Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge

8.148.1 Extruded section Profile size 48x40 mm.

D3 2 4.80 9.60 meter

3 8.149 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws.

8.149.1 24 mm thick door shutters with styles and rails of size 59x24 mm

4 4.13 Grading roof for water proofing treatment with:

4.13.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size)

net qnty 3.26 cum

5 3.14 Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer. QNTY AS PER ITEM NO.4 REPAIR

@ 6.35 begS/KG 20.71 KG

6 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete: QNTY AS PER ITEM NO.4 REPAIR

3.12.1 Thermo-Mechanically treated bars FE 415 @ 80KG/CUM 163.09 KG

7 11.1 Providing and making 6mm thick cement plaster of mix:

11.1.2 In Cement mortar 1:4 (1 cement : 4 fine sand) QNTY AS PER ITEM NO.4 ceiling ( dismentling) 26.20 sqm

8 11.2 Providing and making 12mm thick cement plaster of mix: QNTY AS PER ITEM NO.4 innner side ( dismentling)

11.2.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) 150.41 sqm

9 11.3 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: QNTY AS PER ITEM NO.4 outer side ( dismentling)

11.3.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) 55.83 sqm

10 14.14 Finishing walls with water proofing cement paint of required shade to give an even shade.

14.14.1 On new work (Two or more coats applied @ 3.84 kg/10 sqm) qnty as per item no.9 (repair) 55.83 sqm

11 14.9 Distempering with acrylic washable distemper to give an even shade.

14.9.1 On new work (Two or more coats) qnty as per item no.8(repair) 150.41 sqm

12 14.6 White washing with whiting to give an even shade.

14.6.1 On new work (Three or more coats) qnty as per item no.7(repair) 26.20 sqm

13 14.22 Painting on new work (two or more coats) to give an even shade with:

14.22.1 Satin synthetic enamel paint

(Part - III) Cost of Dismentling Material L.S.

Part-III ( Cost of Dismentling Material) L.S.

3 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete:

3.12.1 Thermo-Mechanically treated bars FE 415

qnty as per item no.2 repair

3.85cum.x50.0kg/cum #REF! kg

4 3.14 Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer. qnty as per item no.2 repair

3.85cum.x 6.35 begs/kg #REF! kg

Detailed estimate for special repair of R.E.S. -1 type quarter at Dhanora Under Sub-Division Keshkal

S.N S.O.R. ITEM No. PARTICULARS QTY. UNIT RATE AMOUNT

Part-I ( dismentling)

1 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 5 each 100.00 500.00

2 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.. 3 each 66.50 199.50

3 16.7 Removing mortars from stones and concrete articles and cleaning the same. (Stacks of cleaned material shall be measured).

16.7.2 In cement mortar 0.87 cum 154.00 133.95

4 16.37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead. 232.44 sqm 11.00 2556.79

Part-II ( Repair)

1 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer.

2 8.148 Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge

8.148.1 Extruded section Profile size 48x40 mm. 9.60 meter 191.00 1833.60

3 8.149 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws.

8.149.1 24 mm thick door shutters with styles and rails of size 59x24 mm 3.20 sqm 2399.00 7676.80

4 4.13 Grading roof for water proofing treatment with:

4.13.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size) 3.26 cum 3817.00 12450.10

5 3.14 Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer. 20.71 kg 43.50 900.98

6 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete:

3.12.1 Thermo-Mechanically treated bars FE 415 163.09 kg 54.50 8888.27

7 11.1 Providing and making 6mm thick cement plaster of mix:

11.1.2 In Cement mortar 1:4 (1 cement : 4 fine sand) 26.20 sqm 87.00 2279.40

8 11.2 Providing and making 12mm thick cement plaster of mix:

11.2.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) 150.41 sqm 91.50 13762.52

9 11.3 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:

11.3.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) 55.83 sqm 107.00 5973.28

10 14.14 Finishing walls with water proofing cement paint of required shade to give an even shade.

14.14.1 On new work (Two or more coats applied @ 3.84 kg/10 sqm) 55.83 sqm 41.00 2288.82

11 14.9 Distempering with acrylic washable distemper to give an even shade.

14.9.1 On new work (Two or more coats) 150.41 sqm 38.00 5715.58

12 14.6 White washing with whiting to give an even shade.

14.6.1 On new work (Three or more coats) 26.20 sqm 9.00 235.80

13 14.22 Painting on new work (two or more coats) to give an even shade with:

14.22.1 Satin synthetic enamel paint 30.13 sqm 55.00 1656.88

Total for Part II 99339.97

Total for Part- I & Part II 102730.20

Part-III ( Cost of Dismentling Material) L.S. 3500.00

Net Amount of Repair (Part-I+ II-III ) 99230.20

Say in lacs rs. 0.99

Detailed estimate for special repair of R.E.S. - 8 type quarter at Dhanora Under Sub-Division Keshkal

S.N S.O.R. ITEM No. PARTICULARS MEASUREMENTS QTY. UNIT

Part-I ( dismentling)

1 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.

2 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead..

3 16.7 Removing mortars from stones and concrete articles and cleaning the same. (Stacks of cleaned material shall be measured).

16.7.2 In cement mortar

main bld. slab 1 6.15 6.50 0.02 0.80

deduction 1 1.8 1.85 0.02 0.07

net qnty 0.87 cum

4 16.36 Dismantling terrazzo or mosaic or glazed vitreous or patent cement or tiled flooring or dado skirting of any thickness without sub base.

Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead.

toilet & bath 1 2 1.10 3.3 7.26

net qnty 150.41

net qnty 55.83 sqm

G.T. 232.44 sqm

Part-II ( Repair)

1 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer.

@30.89 KG/SQM 413.93 kg

2 8.148 Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge kg

8.148.1 Extruded section Profile size 48x40 mm.

D3 2 4.80 9.60 meter

3 8.149 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws.

8.149.1 24 mm thick door shutters with styles and rails of size 59x24 mm

4 4.13 Grading roof for water proofing treatment with:

4.13.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size)

net qnty 3.26 cum

5 3.14 Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer. QNTY AS PER ITEM NO.4 REPAIR

@ 6.35 begS/KG 20.71 KG

6 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete: QNTY AS PER ITEM NO.4 REPAIR

3.12.1 Thermo-Mechanically treated bars FE 415 @ 80KG/CUM 163.09 KG

7 12.3 Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. QNTY AS PER ITEM NO.4 (dismentling)

12.3.1 40 mm thick 9.49 sqm

8 11.1 Providing and making 6mm thick cement plaster of mix:

11.1.2 In Cement mortar 1:4 (1 cement : 4 fine sand) QNTY AS PER ITEM NO.5 ceiling ( dismentling) 26.20 sqm

9 11.2 Providing and making 12mm thick cement plaster of mix: QNTY AS PER ITEM NO.5 innner side ( dismentling)

11.2.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) 150.41 sqm

10 11.3 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: QNTY AS PER ITEM NO.5 outer side ( dismentling)

11.3.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) 55.83 sqm

11 14.14 Finishing walls with water proofing cement paint of required shade to give an even shade.

14.14.1 On new work (Two or more coats applied @ 3.84 kg/10 sqm) qnty as per item no.10(repair) 55.83 sqm

12 14.9 Distempering with acrylic washable distemper to give an even shade.

14.9.1 On new work (Two or more coats) qnty as per item no.9(repair) 150.41 sqm

13 14.6 White washing with whiting to give an even shade.

14.6.1 On new work (Three or more coats) qnty as per item no.8(repair) 26.20 sqm

14 14.22 Painting on new work (two or more coats) to give an even shade with:

14.22.1 Satin synthetic enamel paint

(Part - III) Cost of Dismentling Material L.S.

Part-III ( Cost of Dismentling Material) L.S.

3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete:

3 3.12.1 Thermo-Mechanically treated bars FE 415

qnty as per item no.2 repair

3.85cum.x50.0kg/cum #REF!

3.14 Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer. qnty as per item no.2 repair kg

4 3.85cum.x 6.35 begs/kg #REF!

Detailed estimate for special repair of R.E.S. -8 type quarter at Dhanora Under Sub-Division Keshkal

S.N S.O.R. ITEM No. PARTICULARS QTY. UNIT RATE AMOUNT

Part-I ( dismentling)

1 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 6 each 100.00 600.00

2 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.. 3 each 66.50 199.50

3 16.7 Removing mortars from stones and concrete articles and cleaning the same. (Stacks of cleaned material shall be measured).

16.7.2 In cement mortar 0.87 cum 154.00 133.95

4 16.36 Dismantling terrazzo or mosaic or glazed vitreous or patent cement or tiled flooring or dado skirting of any thickness without sub base. 9.49 sqm 22.50 213.53

5 16.37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead. 232.44 sqm 11.00 2556.79

Part-II ( Repair)

1 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer.

2 8.148 Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge

8.148.1 Extruded section Profile size 48x40 mm. 9.60 meter 191.00 1833.60

3 8.149 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws.

8.149.1 24 mm thick door shutters with styles and rails of size 59x24 mm 3.20 sqm 2399.00 7676.80

4 4.13 Grading roof for water proofing treatment with:

4.13.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size) 3.26 cum 3817.00 12450.10

5 3.14 Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer. 20.71 kg 43.50 900.98

6 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete:

3.12.1 Thermo-Mechanically treated bars FE 415 163.09 kg 54.50 8888.27

7 12.3 Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement.

8 11.1 Providing and making 6mm thick cement plaster of mix:

11.1.2 In Cement mortar 1:4 (1 cement : 4 fine sand) 26.20 sqm 87.00 2279.40

9 11.2 Providing and making 12mm thick cement plaster of mix:

11.2.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) 150.41 sqm 91.50 13762.52

10 11.3 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:

11.3.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) 55.83 sqm 107.00 5973.28

11 14.14 Finishing walls with water proofing cement paint of required shade to give an even shade.

14.14.1 On new work (Two or more coats applied @ 3.84 kg/10 sqm) 55.83 sqm 41.00 2288.82

12 14.9 Distempering with acrylic washable distemper to give an even shade.

14.9.1 On new work (Two or more coats) 150.41 sqm 38.00 5715.58

13 14.6 White washing with whiting to give an even shade.

14.6.1 On new work (Three or more coats) 26.20 sqm 9.00 235.80

14 14.22 Painting on new work (two or more coats) to give an even shade with:

14.22.1 Satin synthetic enamel paint 26.13 sqm 55.00 1436.88

Total for Part II 96593.25

Total for Part- I & Part II 100297.00

Part-III ( Cost of Dismentling Material) L.S. 3200.00

Net Amount of Repair (Part-I+ II-III ) 97097.00

Say in lacs rs. 0.97

Detailed estimate for special repair of R.E.S - 1 type quarter at Bahigaon Under Sub-Division Keshkal

S.N S.O.R. ITEM No. PARTICULARS MEASUREMENTS QTY. UNIT

Part-I ( dismentling)

1 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.

2 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead..

3 16.7 Removing mortars from stones and concrete articles and cleaning the same. (Stacks of cleaned material shall be measured).

16.7.2 In cement mortar

main bld. slab 1 6.15 6.50 0.02 0.80

deduction 1 1.8 1.85 0.02 0.07

net qnty 0.87 cum

4 16.37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead.

( inner side) bed 1 2 2.60 3.3 17.16

toilet & bath 1 2 1.10 3.3 7.26

net qnty 150.41

net qnty 55.83 sqm

G.T. 232.44 sqm

Part-II ( Repair)

1 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer.

@30.89 KG/SQM 475.71 kg kg

2 8.148 Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge

8.148.1 Extruded section Profile size 48x40 mm.

D3 2 4.80 9.60 meter

3 8.149 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws.

8.149.1 24 mm thick door shutters with styles and rails of size 59x24 mm

4 4.13 Grading roof for water proofing treatment with:

4.13.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size)

net qnty 3.26 cum

5 3.14 Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer. QNTY AS PER ITEM NO.4 REPAIR

@ 6.35 begS/KG 20.71 KG

6 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete: QNTY AS PER ITEM NO.4 REPAIR

3.12.1 Thermo-Mechanically treated bars FE 415 @ 80KG/CUM 163.09 KG

7 11.1 Providing and making 6mm thick cement plaster of mix:

11.1.2 In Cement mortar 1:4 (1 cement : 4 fine sand) QNTY AS PER ITEM NO.4 ceiling ( dismentling) 26.20 sqm

8 11.2 Providing and making 12mm thick cement plaster of mix: QNTY AS PER ITEM NO.4 innner side ( dismentling)

11.2.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) 150.41 sqm

9 11.3 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: QNTY AS PER ITEM NO.4 outer side ( dismentling)

11.3.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) 55.83 sqm

10 14.14 Finishing walls with water proofing cement paint of required shade to give an even shade.

14.14.1 On new work (Two or more coats applied @ 3.84 kg/10 sqm) qnty as per item no.9 (repair) 55.83 sqm

11 14.9 Distempering with acrylic washable distemper to give an even shade.

14.9.1 On new work (Two or more coats) qnty as per item no.8(repair) 150.41 sqm

12 14.6 White washing with whiting to give an even shade.

14.6.1 On new work (Three or more coats) qnty as per item no.7(repair) 26.20 sqm

13 14.22 Painting on new work (two or more coats) to give an even shade with:

14.22.1 Satin synthetic enamel paint

(Part - III) Cost of Dismentling Material L.S.

Part-III ( Cost of Dismentling Material) L.S.

3 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete:

3.12.1 Thermo-Mechanically treated bars FE 415

qnty as per item no.2 repair

3.85cum.x50.0kg/cum #REF! kg

4 3.14 Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer. qnty as per item no.2 repair

3.85cum.x 6.35 begs/kg #REF! kg

Detailed estimate for special repair of R.E.S -1 type quarter at Bahigaon Under Sub-Division Keshkal

S.N S.O.R. ITEM No. PARTICULARS QTY. UNIT RATE AMOUNT

Part-I ( dismentling)

1 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 5 each 100.00 500.00

2 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.. 3 each 66.50 199.50

3 16.7 Removing mortars from stones and concrete articles and cleaning the same. (Stacks of cleaned material shall be measured).

16.7.2 In cement mortar 0.87 cum 154.00 133.95

4 16.37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead. 232.44 sqm 11.00 2556.79

Part-II ( Repair)

1 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer.

2 8.148 Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge

8.148.1 Extruded section Profile size 48x40 mm. 9.60 meter 191.00 1833.60

3 8.149 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws.

8.149.1 24 mm thick door shutters with styles and rails of size 59x24 mm 3.20 sqm 2399.00 7676.80

4 4.13 Grading roof for water proofing treatment with:

4.13.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size) 3.26 cum 3817.00 12450.10

5 3.14 Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer. 20.71 kg 43.50 900.98

6 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete:

3.12.1 Thermo-Mechanically treated bars FE 415 163.09 kg 54.50 8888.27

7 11.1 Providing and making 6mm thick cement plaster of mix:

11.1.2 In Cement mortar 1:4 (1 cement : 4 fine sand) 26.20 sqm 87.00 2279.40

8 11.2 Providing and making 12mm thick cement plaster of mix:

11.2.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) 150.41 sqm 91.50 13762.52

9 11.3 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:

11.3.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) 55.83 sqm 107.00 5973.28

10 14.14 Finishing walls with water proofing cement paint of required shade to give an even shade.

14.14.1 On new work (Two or more coats applied @ 3.84 kg/10 sqm) 55.83 sqm 41.00 2288.82

11 14.9 Distempering with acrylic washable distemper to give an even shade.

14.9.1 On new work (Two or more coats) 150.41 sqm 38.00 5715.58

12 14.6 White washing with whiting to give an even shade.

14.6.1 On new work (Three or more coats) 26.20 sqm 9.00 235.80

13 14.22 Painting on new work (two or more coats) to give an even shade with:

14.22.1 Satin synthetic enamel paint 30.13 sqm 55.00 1656.88

Total for Part II 99339.97

Total for Part- I & Part II 102730.20

Part-III ( Cost of Dismentling Material) L.S. 3500.00

Net Amount of Repair (Part-I+ II-III ) 99230.20

Say in lacs rs. 0.99

Detailed estimate for special repair of R.E.S - 2 type quarter at Bahigaon Under Sub-Division Keshkal

S.N S.O.R. ITEM No. PARTICULARS MEASUREMENTS QTY. UNIT

Part-I ( dismentling)

1 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.

2 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead..

3 16.7 Removing mortars from stones and concrete articles and cleaning the same. (Stacks of cleaned material shall be measured).

16.7.2 In cement mortar

main bld. slab 1 6.15 6.50 0.02 0.80

deduction 1 1.8 1.85 0.02 0.07

net qnty 0.87 cum

4 16.36 Dismantling terrazzo or mosaic or glazed vitreous or patent cement or tiled flooring or dado skirting of any thickness without sub base.

Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead.

toilet & bath 1 2 1.10 3.3 7.26

net qnty 152.41

net qnty 55.83 sqm

G.T. 234.44 sqm

Part-II ( Repair)

1 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer.

@30.89 KG/SQM 413.93 kg

2 8.148 Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge kg

8.148.1 Extruded section Profile size 48x40 mm.

D3 2 4.80 9.60 meter

3 8.149 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws.

8.149.1 24 mm thick door shutters with styles and rails of size 59x24 mm

4 4.13 Grading roof for water proofing treatment with:

4.13.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size)

net qnty 3.26 cum

5 3.14 Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer. QNTY AS PER ITEM NO.4 REPAIR

@ 6.35 begS/KG 20.71 KG

6 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete: QNTY AS PER ITEM NO.4 REPAIR

3.12.1 Thermo-Mechanically treated bars FE 415 @ 80KG/CUM 163.09 KG

7 12.3 Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. QNTY AS PER ITEM NO.4 (dismentling)

12.3.1 40 mm thick 9.49 sqm

8 11.1 Providing and making 6mm thick cement plaster of mix:

11.1.2 In Cement mortar 1:4 (1 cement : 4 fine sand) QNTY AS PER ITEM NO.5 ceiling ( dismentling) 26.20 sqm

9 11.2 Providing and making 12mm thick cement plaster of mix: QNTY AS PER ITEM NO.5 innner side ( dismentling)

11.2.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) 152.41 sqm

10 11.3 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: QNTY AS PER ITEM NO.5 outer side ( dismentling)

11.3.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) 55.83 sqm

11 14.14 Finishing walls with water proofing cement paint of required shade to give an even shade.

14.14.1 On new work (Two or more coats applied @ 3.84 kg/10 sqm) qnty as per item no.10(repair) 55.83 sqm

12 14.9 Distempering with acrylic washable distemper to give an even shade.

14.9.1 On new work (Two or more coats) qnty as per item no.9(repair) 152.41 sqm

13 14.6 White washing with whiting to give an even shade.

14.6.1 On new work (Three or more coats) qnty as per item no.8(repair) 26.20 sqm

14 14.22 Painting on new work (two or more coats) to give an even shade with:

14.22.1 Satin synthetic enamel paint

(Part - III) Cost of Dismentling Material L.S.

Part-III ( Cost of Dismentling Material) L.S.

3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete:

3 3.12.1 Thermo-Mechanically treated bars FE 415

qnty as per item no.2 repair

3.85cum.x50.0kg/cum #REF!

3.14 Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer. qnty as per item no.2 repair kg

4 3.85cum.x 6.35 begs/kg #REF!

Detailed estimate for special repair of R.E.S -2 type quarter at Bahigaon Under Sub-Division Keshkal

S.N S.O.R. ITEM No. PARTICULARS QTY. UNIT RATE AMOUNT

Part-I ( dismentling)

1 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 6 each 100.00 600.00

2 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.. 3 each 66.50 199.50

3 16.7 Removing mortars from stones and concrete articles and cleaning the same. (Stacks of cleaned material shall be measured).

16.7.2 In cement mortar 0.87 cum 154.00 133.95

4 16.36 Dismantling terrazzo or mosaic or glazed vitreous or patent cement or tiled flooring or dado skirting of any thickness without sub base. 9.49 sqm 22.50 213.53

5 16.37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead. 234.44 sqm 11.00 2578.79

Part-II ( Repair)

1 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer.

2 8.148 Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge

8.148.1 Extruded section Profile size 48x40 mm. 9.60 meter 191.00 1833.60

3 8.149 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws.

8.149.1 24 mm thick door shutters with styles and rails of size 59x24 mm 3.20 sqm 2399.00 7676.80

4 4.13 Grading roof for water proofing treatment with:

4.13.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size) 3.26 cum 3817.00 12450.10

5 3.14 Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer. 20.71 kg 43.50 900.98

6 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete:

3.12.1 Thermo-Mechanically treated bars FE 415 163.09 kg 54.50 8888.27

7 12.3 Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement.

8 11.1 Providing and making 6mm thick cement plaster of mix:

11.1.2 In Cement mortar 1:4 (1 cement : 4 fine sand) 26.20 sqm 87.00 2279.40

9 11.2 Providing and making 12mm thick cement plaster of mix:

11.2.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) 152.41 sqm 91.50 13945.52

10 11.3 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:

11.3.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) 55.83 sqm 107.00 5973.28

11 14.14 Finishing walls with water proofing cement paint of required shade to give an even shade.

14.14.1 On new work (Two or more coats applied @ 3.84 kg/10 sqm) 55.83 sqm 41.00 2288.82

12 14.9 Distempering with acrylic washable distemper to give an even shade.

14.9.1 On new work (Two or more coats) 152.41 sqm 38.00 5791.58

13 14.6 White washing with whiting to give an even shade.

14.6.1 On new work (Three or more coats) 26.20 sqm 9.00 235.80

14 14.22 Painting on new work (two or more coats) to give an even shade with:

14.22.1 Satin synthetic enamel paint 30.13 sqm 55.00 1656.88

Total for Part II 97072.25

Total for Part- I & Part II 100798.00

Part-III ( Cost of Dismentling Material) L.S. 4500.00

Net Amount of Repair (Part-I+ II-III ) 96298.00

Say in lacs rs. 0.96

Detailed estimate for special repair of R.E.S - 5 type quarter at Keshkal

S.N S.O.R. ITEM No. PARTICULARS MEASUREMENTS QTY. UNIT

Part-I ( dismentling)

1 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.

2 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead..

3 16.7 Removing mortars from stones and concrete articles and cleaning the same. (Stacks of cleaned material shall be measured).

16.7.2 In cement mortar

main bld. slab 1 6.15 6.50 0.02 0.80

deduction 1 1.8 1.85 0.02 0.07

net qnty 0.87 cum

4 16.37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead.

( inner side) bed 1 2 2.60 3.3 17.16

toilet & bath 1 2 1.10 3.3 7.26

net qnty 150.41

net qnty 55.83 sqm

G.T. 232.44 sqm

Part-II ( Repair)

1 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer.

@30.89 KG/SQM 525.13 kg kg

2 8.148 Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge

8.148.1 Extruded section Profile size 48x40 mm.

D3 2 4.80 9.60 meter

3 8.149 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws.

8.149.1 24 mm thick door shutters with styles and rails of size 59x24 mm

4 4.13 Grading roof for water proofing treatment with:

4.13.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size)

net qnty 3.26 cum

5 3.14 Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer. QNTY AS PER ITEM NO.4 REPAIR

@ 6.35 begS/KG 20.71 KG

6 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete: QNTY AS PER ITEM NO.4 REPAIR

3.12.1 Thermo-Mechanically treated bars FE 415 @ 80KG/CUM 163.09 KG

7 11.1 Providing and making 6mm thick cement plaster of mix:

11.1.2 In Cement mortar 1:4 (1 cement : 4 fine sand) QNTY AS PER ITEM NO.4 ceiling ( dismentling) 26.20 sqm

8 11.2 Providing and making 12mm thick cement plaster of mix: QNTY AS PER ITEM NO.4 innner side ( dismentling) 150.41

11.2.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) sqm

9 11.3 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: QNTY AS PER ITEM NO.4 outer side ( dismentling) 55.83

11.3.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) sqm

10 14.22 Painting on new work (two or more coats) to give an even shade with:

14.22.1 Satin synthetic enamel paint

(Part - III) Cost of Dismentling Material L.S.

Part-III ( Cost of Dismentling Material) L.S.

3 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete:

3.12.1 Thermo-Mechanically treated bars FE 415

qnty as per item no.2 repair

3.85cum.x50.0kg/cum #REF! kg

4 3.14 Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer. qnty as per item no.2 repair

3.85cum.x 6.35 begs/kg #REF! kg

Detailed estimate for special repair of R.E.S -5 type quarter at Keshkal

S.N S.O.R. ITEM No. PARTICULARS QTY. UNIT RATE AMOUNT

Part-I ( dismentling)

1 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 4 each 100.00 400.00

2 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.. 3 each 66.50 199.50

3 16.7 Removing mortars from stones and concrete articles and cleaning the same. (Stacks of cleaned material shall be measured).

16.7.2 In cement mortar 0.87 cum 154.00 133.95

4 16.37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead. 232.44 sqm 11.00 2556.79

Part-II ( Repair)

1 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer.

2 8.148 Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge

8.148.1 Extruded section Profile size 48x40 mm. 9.60 meter 191.00 1833.60

3 8.149 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws.

8.149.1 24 mm thick door shutters with styles and rails of size 59x24 mm 3.20 sqm 2399.00 7676.80

4 4.13 Grading roof for water proofing treatment with:

4.13.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size) 3.26 cum 3817.00 12450.10

5 3.14 Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer. 20.71 kg 43.50 900.98

6 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete:

3.12.1 Thermo-Mechanically treated bars FE 415 163.09 kg 54.50 8888.27

7 11.1 Providing and making 6mm thick cement plaster of mix:

11.1.2 In Cement mortar 1:4 (1 cement : 4 fine sand) 26.20 sqm 87.00 2279.40

8 11.2 Providing and making 12mm thick cement plaster of mix:

11.2.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) 150.41 sqm 91.50 13762.52

9 11.3 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:

11.3.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) 55.83 sqm 107.00 5973.81

10 14.22 Painting on new work (two or more coats) to give an even shade with:

14.22.1 Satin synthetic enamel paint 26.13 sqm 55.00 1436.88

Total for Part II 94587.10

Total for Part- I & Part II 97877.33

Part-III ( Cost of Dismentling Material) L.S. 3200.00

Net Amount of Repair (Part-I+ II-III ) 94677.33

Say rs. 0.95 Lacs.

Detailed estimate for special repair of R.E.S - 6 type quarter at Keshkal

S.N S.O.R. ITEM No. PARTICULARS MEASUREMENTS QTY. UNIT

Part-I ( dismentling)

1 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.

2 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead..

3 16.7 Removing mortars from stones and concrete articles and cleaning the same. (Stacks of cleaned material shall be measured).

16.7.2 In cement mortar

main bld. slab 1 6.15 6.50 0.02 0.80

deduction 1 1.8 1.85 0.02 0.07

net qnty 0.87 cum

4 16.37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead.

( inner side) bed 1 2 2.60 3.3 17.16

toilet & bath 1 2 1.10 3.3 7.26

net qnty 150.41

net qnty 55.83 sqm

G.T. 232.44 sqm

Part-II ( Repair)

1 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer.

@30.89 KG/SQM 586.91 kg kg

2 8.148 Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge

8.148.1 Extruded section Profile size 48x40 mm.

D3 2 4.80 9.60 meter

3 8.149 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws.

8.149.1 24 mm thick door shutters with styles and rails of size 59x24 mm

4 4.13 Grading roof for water proofing treatment with:

4.13.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size)

net qnty 3.26 cum

5 3.14 Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer. QNTY AS PER ITEM NO.4 REPAIR

@ 6.35 begS/KG 20.71 KG

6 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete: QNTY AS PER ITEM NO.4 REPAIR

3.12.1 Thermo-Mechanically treated bars FE 415 @ 80KG/CUM 163.09 KG

7 11.1 Providing and making 6mm thick cement plaster of mix:

11.1.2 In Cement mortar 1:4 (1 cement : 4 fine sand) QNTY AS PER ITEM NO.4 ceiling ( dismentling) 26.20 sqm

8 11.2 Providing and making 12mm thick cement plaster of mix: QNTY AS PER ITEM NO.4 innner side ( dismentling) 150.41

11.2.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) sqm

9 11.3 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: QNTY AS PER ITEM NO.4 outer side ( dismentling) 55.83

11.3.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) sqm

10 14.22 Painting on new work (two or more coats) to give an even shade with:

14.22.1 Satin synthetic enamel paint

(Part - III) Cost of Dismentling Material L.S.

Part-III ( Cost of Dismentling Material) L.S.

3 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete:

3.12.1 Thermo-Mechanically treated bars FE 415

qnty as per item no.2 repair

3.85cum.x50.0kg/cum #REF! kg

4 3.14 Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer. qnty as per item no.2 repair

3.85cum.x 6.35 begs/kg #REF! kg

Detailed estimate for special repair of R.E.S -5 type quarter at Keshkal

S.N S.O.R. ITEM No. PARTICULARS QTY. UNIT RATE AMOUNT

Part-I ( dismentling)

1 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 5 each 100.00 500.00

2 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.. 3 each 66.50 199.50

3 16.7 Removing mortars from stones and concrete articles and cleaning the same. (Stacks of cleaned material shall be measured).

16.7.2 In cement mortar 0.87 cum 154.00 133.95

4 16.37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead. 232.44 sqm 11.00 2556.79

Part-II ( Repair)

1 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer.

2 8.148 Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge

8.148.1 Extruded section Profile size 48x40 mm. 9.60 meter 191.00 1833.60

3 8.149 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws.

8.149.1 24 mm thick door shutters with styles and rails of size 59x24 mm 3.20 sqm 2399.00 7676.80

4 4.13 Grading roof for water proofing treatment with:

4.13.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size) 3.26 cum 3817.00 12450.10

5 3.14 Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer. 20.71 kg 43.50 900.98

6 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete:

3.12.1 Thermo-Mechanically treated bars FE 415 163.09 kg 54.50 8888.27

7 11.1 Providing and making 6mm thick cement plaster of mix:

11.1.2 In Cement mortar 1:4 (1 cement : 4 fine sand) 26.20 sqm 87.00 2279.40

8 11.2 Providing and making 12mm thick cement plaster of mix:

11.2.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) 150.41 sqm 91.50 13762.52

9 11.3 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:

11.3.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) 55.83 sqm 107.00 5973.81

10 14.22 Painting on new work (two or more coats) to give an even shade with:

14.22.1 Satin synthetic enamel paint 30.13 sqm 55.00 1656.88

Total for Part II 99440.60

Total for Part- I & Part II 102830.83

Part-III ( Cost of Dismentling Material) L.S. 3800.00

Net Amount of Repair (Part-I+ II-III ) 99030.83

Say rs. 0.99 Lacs.

Detailed estimate for special repair of R.E.S - 7 type quarter at Keshkal

S.N S.O.R. ITEM No. PARTICULARS MEASUREMENTS QTY. UNIT

Part-I ( dismentling)

1 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.

2 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead..

3 16.7 Removing mortars from stones and concrete articles and cleaning the same. (Stacks of cleaned material shall be measured).

16.7.2 In cement mortar

main bld. slab 1 6.15 6.50 0.02 0.80

deduction 1 1.8 1.85 0.02 0.07

net qnty 0.87 cum

4 16.37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead.

( inner side) bed 1 2 2.60 3.3 17.16

toilet & bath 1 2 1.10 3.3 7.26

net qnty 150.41

net qnty 55.83 sqm

G.T. 232.44 sqm

Part-II ( Repair)

1 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer.

@30.89 KG/SQM 586.91 kg kg

2 8.148 Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge

8.148.1 Extruded section Profile size 48x40 mm.

D3 2 4.80 9.60 meter

3 8.149 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws.

8.149.1 24 mm thick door shutters with styles and rails of size 59x24 mm

4 4.13 Grading roof for water proofing treatment with:

4.13.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size)

net qnty 3.26 cum

5 3.14 Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer. QNTY AS PER ITEM NO.4 REPAIR

@ 6.35 begS/KG 20.71 KG

6 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete: QNTY AS PER ITEM NO.4 REPAIR

3.12.1 Thermo-Mechanically treated bars FE 415 @ 80KG/CUM 163.09 KG

7 11.1 Providing and making 6mm thick cement plaster of mix:

11.1.2 In Cement mortar 1:4 (1 cement : 4 fine sand) QNTY AS PER ITEM NO.4 ceiling ( dismentling) 26.20 sqm

8 11.2 Providing and making 12mm thick cement plaster of mix: QNTY AS PER ITEM NO.4 innner side ( dismentling) 150.41

11.2.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) sqm

9 11.3 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: QNTY AS PER ITEM NO.4 outer side ( dismentling) 55.83

11.3.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) sqm

10 14.22 Painting on new work (two or more coats) to give an even shade with:

14.22.1 Satin synthetic enamel paint

(Part - III) Cost of Dismentling Material L.S.

Part-III ( Cost of Dismentling Material) L.S.

3 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete:

3.12.1 Thermo-Mechanically treated bars FE 415

qnty as per item no.2 repair

3.85cum.x50.0kg/cum #REF! kg

4 3.14 Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer. qnty as per item no.2 repair

3.85cum.x 6.35 begs/kg #REF! kg

Detailed estimate for special repair of R.E.S -7 type quarter at Keshkal

S.N S.O.R. ITEM No. PARTICULARS QTY. UNIT RATE AMOUNT

Part-I ( dismentling)

1 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 5 each 100.00 500.00

2 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.. 3 each 66.50 199.50

3 16.7 Removing mortars from stones and concrete articles and cleaning the same. (Stacks of cleaned material shall be measured).

16.7.2 In cement mortar 0.87 cum 154.00 133.95

4 16.37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead. 232.44 sqm 11.00 2556.79

Part-II ( Repair)

1 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer.

2 8.148 Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge

8.148.1 Extruded section Profile size 48x40 mm. 9.60 meter 191.00 1833.60

3 8.149 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws.

8.149.1 24 mm thick door shutters with styles and rails of size 59x24 mm 3.20 sqm 2399.00 7676.80

4 4.13 Grading roof for water proofing treatment with:

4.13.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size) 3.26 cum 3817.00 12450.10

5 3.14 Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer. 20.71 kg 43.50 900.98

6 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete:

3.12.1 Thermo-Mechanically treated bars FE 415 163.09 kg 54.50 8888.27

7 11.1 Providing and making 6mm thick cement plaster of mix:

11.1.2 In Cement mortar 1:4 (1 cement : 4 fine sand) 26.20 sqm 87.00 2279.40

8 11.2 Providing and making 12mm thick cement plaster of mix:

11.2.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) 150.41 sqm 91.50 13762.52

9 11.3 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:

11.3.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) 55.83 sqm 107.00 5973.81

10 14.22 Painting on new work (two or more coats) to give an even shade with:

14.22.1 Satin synthetic enamel paint 30.13 sqm 55.00 1656.88

Total for Part II 99440.60

Total for Part- I & Part II 102830.83

Part-III ( Cost of Dismentling Material) L.S. 3500.00

Net Amount of Repair (Part-I+ II-III ) 99330.83

Say rs. 0.993 Lacs.

G E N E R A L - A B S T R A C T

S. No. Sub-Head Amount

1 Detailed estimate for special repair of High secondary School Building at Arandi 446885.47

Total 446885.47

Total 527324.47

Say Rs. In Lacs 5.27

GOVT. OF CHHATTISGARH P.W.D. (B/R) DIVISION KONDAGAON

Detailed estimate for special repair of High secondary School Building at Arandi

FOR TECHNICAL SANCTION ESTIMATED

Cost Rs. 5.27 Lacs

N.I.T. SCHEDULE FOR SPECIAL REPAIR OF HIGH SECONDARY SCHOOL BUILDING AT ARANDI

SOR of Building Work for P.W.D. w.e.f. 10-06-2026 PAC 4.50 LACS

S. No. Chapter No Item No Sub Item No Particulars Quantity Unit Rate Amount

1 16 16.26 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 12 each 85.00 1020.00

2 16 16.27 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.. 13 each 57.00 741.00

3 16 16.7 16.7.2 Removing mortars from stones and concrete articles and cleaning the same. (Stacks of cleaned material shall be measured). In cement mortar 8.99 cum 131.00 1178.00

4 16 16.37 16.37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead. 675.99 cum 9.00 6084.00

5 9 9.13 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer. 2301.26 kg 64.00 147281.00

6 8 8.148 8.148.1 Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge Extruded section Profile size 48x40 mm. 16.20 meter 162.00 2624.00

7 8 8.149 8.149.1 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. 24 mm thick door shutters with styles and rails of size 59x24 mm 5.04 sqm 2039.00 10277.00

8 4 4.13 4.13.1 Grading roof for water proofing treatment with: Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size) 33.72 cum 3244.00 109388.00

9 3 3.1 3.12.1 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete: Thermo-Mechanically treated bars FE 415 1686.00 kg 46.00 77556.00

10 11 11.1 11.1.2 Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand) 317.19 sqm 74.00 23472.00

11 11 11.2 11.2.4 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 358.80 sqm 78.00 27986.00

12 14 14.61 14.61 Providing and applying Synthatic oil bound washable Distemper having VOC content less than 50gms/ lit. Minimum two coats up to final finish to give an even shade applied 1.25 kg / 10Sqm as per relevant I.S. Code 428:2000 (product such as Asian Tractor synthatic distemper , Berger Bison Lite , Dulux Magik , Birla Opus Style super smart) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work. 675.99 sqm 48.00 32448.00

13 14 14.71 14.71 Providing and applying satin/ matt finish Enamel paint mimimum 2 coats in all surface applying @ 0.75 lit/ 10 Sqm up to required finish as per relevent I.S. code 2932: 2013 of (Product such as Asian satin Enamel, Dulux Promise Premium Enamel, Nerolac Synthatic Enamel, Opus Prime enamel) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc. complete for the work. 91.43 sqm 113.00 10331.00

To enable entering data into the sheet, please click on 'Enable Editing'.

Please insert items from 12th row.

Every row will be considered as a distinct item.

The row, in which the two fields- 'Item Code' and 'Description' are blank, will not be considered.

If 'CREDIT ITEM' is not entered, default value '0' will be taken.

If 'Calc Field' is not entered, default value 'N' will be taken.

MAX ITEM LIMIT IN EACH EXCEL FILE IS 1000

Name of work:- SPECIAL REPAIR OF HIGH SECONDARY SCHOOL BUILDING AT ARANDI

S. No. Department SOR Year S.OR. Item No. ITEM DESCRIPTION Quantity Rate Unit Amount Serial no. Credit item (0/1) Field (Y/N) Reserve EMD Amount

1 PWD BUILDING 2026 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 12 85.00 each 1020.00 0 N 0 0

2 PWD BUILDING 2026 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.. 13 57.00 each 741.00 0 N 0 0

3 PWD BUILDING 2026 16.7.2 Removing mortars from stones and concrete articles and cleaning the same. (Stacks of cleaned material shall be measured). In cement mortar 9 131.00 cum 1178.00 0 N 0 0

4 PWD BUILDING 2026 16.37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead. 676 9.00 cum 6084.00 0 N 0 0

5 PWD BUILDING 2026 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer. 2301 64.00 kg 147281.00 0 N 0 0

6 PWD BUILDING 2026 8.148.1 Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge Extruded section Profile size 48x40 mm. 16 162.00 meter 2624.00 0 N 0 0

7 PWD BUILDING 2026 8.149.1 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. 24 mm thick door shutters with styles and rails of size 59x24 mm 5 2039.00 sqm 10277.00 0 N 0 0

8 PWD BUILDING 2026 4.13.1 Grading roof for water proofing treatment with: Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size) 34 3244.00 cum 109388.00 0 N 0 0

9 PWD BUILDING 2026 3.12.1 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete: Thermo-Mechanically treated bars FE 415 1686 46.00 kg 77556.00 0 N 0 0

10 PWD BUILDING 2026 11.1.2 Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand) 317 74.00 sqm 23472.00 0 N 0 0

11 PWD BUILDING 2026 11.2.4 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 359 78.00 sqm 27986.00 0 N 0 0

12 PWD BUILDING 2026 14.61 Providing and applying Synthatic oil bound washable Distemper having VOC content less than 50gms/ lit. Minimum two coats up to final finish to give an even shade applied 1.25 kg / 10Sqm as per relevant I.S. Code 428:2000 (product such as Asian Tractor synthatic distemper , Berger Bison Lite , Dulux Magik , Birla Opus Style super smart) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work. 676 48.00 sqm 32448.00 0 N 0 0

13 PWD BUILDING 2026 14.71 Providing and applying satin/ matt finish Enamel paint mimimum 2 coats in all surface applying @ 0.75 lit/ 10 Sqm up to required finish as per relevent I.S. code 2932: 2013 of (Product such as Asian satin Enamel, Dulux Promise Premium Enamel, Nerolac Synthatic Enamel, Opus Prime enamel) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc. complete for the work. 91 113.00 sqm 10331.00 0 N 0 0

Say in Lacs 4.50

N.I.T. SCHEDULE FOR SPECIAL REPAIR OF BUILDINGS UNDER SUB-DIVISION KESHKAL

SOR of Building Work for P.W.D. w.e.f. 10-06-2026 PAC 16.93 LACS

S. No. Chapter No Item No Sub Item No Particulars Quantity Unit Rate Amount Badbattar Arandi 14 Qtr. GAD Total Qunt. Amount Badbattar Amount Arandi Amount 14 Qtr. Amount

1 16 16.8 16.8 Dismantling flag stone flooring laid in cement/lime mortar including stacking of serviceable material and disposal of unserviceable material within 50 metre lead. 5.00 sqm 48.00 240.00 5 5 240.00

2 16 16.9 16.9 Dismantling of old tarfelts of water proofing treatment of any course from the top of roof of any floor including disposal and removal of material with 50 metre lead. 458.64 sqm 9.00 4128.00 458.64 458.64 4128.00 0.00 0.00 4128

3 16 16.26 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 58 each 85.00 4930.00 10 12 28 8 58 4930.00 850.00 1020.00 2380

4 16 16.27 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.. 58 each 57.00 3306.00 11 13 28 6 58 3306.00 627.00 741.00 1596

5 16 16.28 16.28 Taking out door shutters (steel or wood) including stacking within 50 metres lead. 28 each 40.00 1120.00 28 28 1120.00 0.00 0.00 1120

6 16 16.7.2 16.7.2 Removing mortars from stones and concrete articles and cleaning the same. (Stacks of cleaned material shall be measured). In cement mortar 19.26 cum 131.00 2524.00 10.2716 8.992 19.2636 2524.00 1346.00 1178.00 0

7 16 16.37 16.37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead. 3203.45 cum 9.00 28831.00 619.61 675.99 1864.77 43.08 3203.45 28831.00 5576.00 6084.00 16783

8 9 9.13 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer. 6037.36 kg 64.00 386391.00 1994.0958 2301.2598 1344 398 6037.3556 386391.00 127622.00 147281.00 86016

9 3 3.1 3.1.3 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:3:6(1 cement : 3 coarse sand : 6 graded stoneaggregate 40mm nominalsize). 4.88 cum 2525.00 12322.00

10 12 12.3 12.3.2 Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 50mmthick 48.80 cum 216.00 10541.00

11 8 8.12 8.12.2 Providing and fixing flush door shutters, conforming to IS : 2202 (Part- I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges. 35 mm. thick (single leaf) 56.00 sqm 1704.00 95424.00 56.00 56 95424.00 0.00 0.00 95424

12 8 8.107 8.107.2 Providing and fixing powder coated M.S. butt hinges with necessary iron screws: 100x58x1.90 mm 168.00 each 21.00 3528.00 168.00 168 3528.00 0.00 0.00 3528

14 8 8.112 8.112.1 Providing and fixing powder coated M.S. sliding door bolts with bolts, nuts and necessary iron screws: 300x16 mm 140.00 each 115.00 16100.00 140.00 140 16100.00 0.00 0.00 16100

15 8 8.115 8.115.2 Providing and fixing powder coated M.S. tower bolts (Barrel type) with necessary iron screws: 200 x10mm 70.00 each 28.00 1960.00 70.00 70 1960.00 0.00 0.00 1960

16 8 8.116 8.116.1 Providing and fixing powder coated M.S. handles with necessary iron screws: 125 mm 140.00 each 52.00 7280.00 140.00 140 7280.00 0.00 0.00 7280

17 8 8.119 8.119 Providing and fixing powder coated MS hanging door stopper with necessary powder coated MS steel screws complete. 84.00 each 13.00 1092.00 84.00 84 1092.00 0.00 0.00 1092

18 8 8.148 8.148.1 Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge Extruded section Profile size 48x40 mm. 32.40 meter 162.00 5249.00 16.2 16.2 32.4 5249.00 2624.00 2624.00 0

19 8 8.149 8.149.1 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. 24 mm thick door shutters with styles and rails of size 59x24 mm 10.08 sqm 2039.00 20553.00 5.04 5.04 10.08 20553.00 10277.00 10277.00 0

20 4 4.13 4.13.1 Grading roof for water proofing treatment with: Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size) 72.24 cum 3244.00 234342.00 38.5185 33.72 72.2385 234342.00 124954.00 109388.00 0

21 3 3.12 3.12.1 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete: Thermo-Mechanically treated bars FE 415 3611.93 kg 46.00 166149.00 1925.925 1686 3611.925 166149.00 88593.00 77556.00 0

22 11 11.1 11.1.2 Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand) 712.88 sqm 74.00 52753.00 395.69 317.19 712.88 52753.00 29281.00 23472.00 0

23 11 11.2 11.2.4 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 602.37 sqm 78.00 46985.00 223.92 358.8 582.72 45452.00 17466.00 27986.00 0

24 11 11.3 11.3.4 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 19.65 sqm 91.00 1788.00 0

25 14 14.61 14.61 Providing and applying Synthatic oil bound washable Distemper having VOC content less than 50gms/ lit. Minimum two coats up to final finish to give an even shade applied 1.25 kg / 10Sqm as per relevant I.S. Code 428:2000 (product such as Asian Tractor synthatic distemper , Berger Bison Lite , Dulux Magik , Birla Opus Style super smart) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work. 1295.60 sqm 48.00 62189.00 619.61 675.99 1295.6 62189.00 29741.00 32448.00 0

26 14 14.71 14.71 Providing and applying satin/ matt finish Enamel paint mimimum 2 coats in all surface applying @ 0.75 lit/ 10 Sqm up to required finish as per relevent I.S. code 2932: 2013 of (Product such as Asian satin Enamel, Dulux Promise Premium Enamel, Nerolac Synthatic Enamel, Opus Prime enamel) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc. complete for the work. 343.70 sqm 113.00 38838.00 74.268 91.428 178.00 343.70 38838.00 8392.00 10331.00 20114

27 4 4.22 4.22 Providing Water proofing treatment over Roof, Wall, Chhajjas, Balcony with Diamond Shield and Sealer coat or equivalent at leakage/ seepage area consisting of the operation: (i) Surface preparation roughening of surface, opening of cracks in ‘V’ groove in size of 5mm x 10m (WxD), filling of cracks with putty of Diamond shield with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/ Nylon brush. Removing all dust particles and washing with adequate water to clean completely. (ii) Providing and applying 1st coat of diamond shield or equivalent compound (having two component dry powder 80% Chemical 20% (chemical having 30% solid contents) making flexible waterproof and protective modified mortar with minimum thickness 70-80 micron after proper mixing of both the parts of compound along with laying of fiber glass mesh (of weaving size of 10x10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to set in natural air for minimum 2 Hrs. After 1st coat apply 2nd coat with minimum thickness 100 micron of the same compound. Allow the 2nd coat to set in natural air for minimum 4 Hrs. Total consumption of the diamond shield or equivalent in both coat should be @ 17.90 kg for 10sqm area. (iii) Over the above layers providing and applying 1st coat of sealer compound (Single component High Build elastomeric, flexible, pure acrylic waterproofing membranes having solid content of 65%) minimum 50-60 micron and allow it to set in natural air for minimum 2 Hrs. After 1st coat apply 2nd and final coat 120- 140 micron of sealer compound and allow it to set in natural air for minimum 4 Hrs. Consumption of Sealer compound should be @ 5.40 kg per 10 sqm area. The final area appearance of the coating will be milky white (iv) The treated area should be cure with water for 48 hrs by flooding the surface. All above operations to be done in order. The application shall be got done through the authorised applicator of the manufacturer. 544.64 sqm 358.00 194981.00 86.52 458.64 458.64 164193.00 0.00 0.00 164193

28 17 17.1 17.1.1 Repairs to plaster in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls with cement mortar 1:4 (1 cement : 4 fine sand) complete including disposal of rubbish to the dumping ground within 50metres lead : 1864.77 sqm 112.00 208854.00 1864.77 1864.77 208854.00 0.00 0.00 208854

29 14 14.85 14.85.1 Providing and applying for renewing Acrylic washable Distemper or lite economy Plastic emulsion paint having VOC content less than 50gms/ lit as per relevant I.S. Code 428:2000 (product such as Tractor Uno, Dulux acrylic distemper, Berger Bison, Opus Style/ lite economy emulsion product such as Asian Tactor Spark , Dulux Pomise sheen, Neroloc Litil Master, Berger Bison Lite, Nippon Superio.) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work. 1864.77 sqm 34.00 63402.00 1864.77 1864.77 63402.00 0.00 0.00 63402

30 9 9.16 9.16.2 Providing and fixing M.S. frames of doors, windows, ventilators and cupboards joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 39.20 sqm 62.00 2430.00 39.20 39.2 2430.00 0.00 0.00 2430

31 8 8.152 8.152 Providing and fixing 30mm thick factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45degree angle on either side forming styles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2 ) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per Manufacturer’s specification including 3 nos ISI marked stainless steel hinges of size 100x58x1.9 mm complete. (for W.C. and bathroom door shutter). PVC door shutter 3.20 sqm 1970.00 6304.00 3.20 3.2 6304.00 0.00 0.00 6304

32 18 18.17 18.17.1 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : White Size 550x450mm 1.00 each 1216.00 1216.00

33 19 19.42 19.42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 1000.00 litter 6.00 6000.00

To enable entering data into the sheet, please click on 'Enable Editing'.

Please insert items from 12th row.

Every row will be considered as a distinct item.

The row, in which the two fields- 'Item Code' and 'Description' are blank, will not be considered.

If 'CREDIT ITEM' is not entered, default value '0' will be taken.

If 'Calc Field' is not entered, default value 'N' will be taken.

MAX ITEM LIMIT IN EACH EXCEL FILE IS 1000

Name of work:- SPECIAL REPAIR OF BUILDINGS UNDER SUB-DIVISION KESHKAL

S. No. Department SOR Year S.OR. Item No. ITEM DESCRIPTION Quantity Rate Unit Amount Serial no. Credit item (0/1) Field (Y/N) Reserve EMD Amount

1 PWD BUILDING 2026 16.8 Dismantling flag stone flooring laid in cement/lime mortar including stacking of serviceable material and disposal of unserviceable material within 50 metre lead. 5.00 48.00 sqm 240.00 0 N 0 0

2 PWD BUILDING 2026 16.9 Dismantling of old tarfelts of water proofing treatment of any course from the top of roof of any floor including disposal and removal of material with 50 metre lead. 459 9.00 sqm 4128.00 0 N 0 0

3 PWD BUILDING 2026 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 58 85.00 each 4930.00 0 N 0 0

4 PWD BUILDING 2026 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.. 58 57.00 each 3306.00 0 N 0 0

5 PWD BUILDING 2026 16.28 Taking out door shutters (steel or wood) including stacking within 50 metres lead. 28.00 40.00 each 1120.00 0 N 0 0

6 PWD BUILDING 2026 16.7.2 Removing mortars from stones and concrete articles and cleaning the same. (Stacks of cleaned material shall be measured). In cement mortar 19.26 131.00 cum 2524.00 0 N 0 0

7 PWD BUILDING 2026 16.37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead. 3203.45 9.00 cum 28831.00 0 N 0 0

8 PWD BUILDING 2026 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer. 6037.36 64.00 kg 386391.00 0 N 0 0

9 PWD BUILDING 2026 3.1.3 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:3:6(1 cement : 3 coarse sand : 6 graded stoneaggregate 40mm nominalsize). 5 2525.00 cum 12322.00 0 N 0 0

10 PWD BUILDING 2026 12.3.2 Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 50mmthick 49 216.00 cum 10541.00 0 N 0 0

11 PWD BUILDING 2026 8.12.2 Providing and fixing flush door shutters, conforming to IS : 2202 (Part- I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges. 35 mm. thick (single leaf) 56 1704.00 sqm 95424.00 0 N 0 0

12 PWD BUILDING 2026 8.107.2 Providing and fixing powder coated M.S. butt hinges with necessary iron screws: 100x58x1.90 mm 168 21.00 each 3528.00 0 N 0 0

14 PWD BUILDING 2026 8.112.1 Providing and fixing powder coated M.S. sliding door bolts with bolts, nuts and necessary iron screws: 300x16 mm 140 115.00 each 16100.00 0 N 0 0

15 PWD BUILDING 2026 8.115.2 Providing and fixing powder coated M.S. tower bolts (Barrel type) with necessary iron screws: 200 x10mm 70.00 28.00 each 1960.00 0 N 0 0

16 PWD BUILDING 2026 8.116.1 Providing and fixing powder coated M.S. handles with necessary iron screws: 125 mm 140.00 52.00 each 7280.00 0 N 0 0

17 PWD BUILDING 2026 8.119 Providing and fixing powder coated MS hanging door stopper with necessary powder coated MS steel screws complete. 84.00 13.00 each 1092.00 0 N 0 0

18 PWD BUILDING 2026 8.148.1 Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge Extruded section Profile size 48x40 mm. 32.40 162.00 meter 5249.00 0 N 0 0

19 PWD BUILDING 2026 8.149.1 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. 24 mm thick door shutters with styles and rails of size 59x24 mm 10.08 2039.00 sqm 20553.00 0 N 0 0

20 PWD BUILDING 2026 4.13.1 Grading roof for water proofing treatment with: Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size) 72.24 3244.00 cum 234342.00 0 N 0 0

21 PWD BUILDING 2026 3.12.1 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete: Thermo-Mechanically treated bars FE 415 3611.93 46.00 kg 166149.00 0 N 0 0

22 PWD BUILDING 2026 11.1.2 Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand) 712.88 74.00 sqm 52753.00 0 N 0 0

23 PWD BUILDING 2026 11.2.4 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 602.37 78.00 sqm 46985.00 0 N 0 0

24 PWD BUILDING 2026 11.3.4 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 19.65 91.00 sqm 1788.00 0 N 0 0

25 PWD BUILDING 2026 14.61 Providing and applying Synthatic oil bound washable Distemper having VOC content less than 50gms/ lit. Minimum two coats up to final finish to give an even shade applied 1.25 kg / 10Sqm as per relevant I.S. Code 428:2000 (product such as Asian Tractor synthatic distemper , Berger Bison Lite , Dulux Magik , Birla Opus Style super smart) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work. 1295.60 48.00 sqm 62189.00 0 N 0 0

26 PWD BUILDING 2026 14.71 Providing and applying satin/ matt finish Enamel paint mimimum 2 coats in all surface applying @ 0.75 lit/ 10 Sqm up to required finish as per relevent I.S. code 2932: 2013 of (Product such as Asian satin Enamel, Dulux Promise Premium Enamel, Nerolac Synthatic Enamel, Opus Prime enamel) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc. complete for the work. 343.70 113.00 sqm 38838.00 0 N 0 0

27 PWD BUILDING 2026 4.22 Providing Water proofing treatment over Roof, Wall, Chhajjas, Balcony with Diamond Shield and Sealer coat or equivalent at leakage/ seepage area consisting of the operation: (i) Surface preparation roughening of surface, opening of cracks in ‘V’ groove in size of 5mm x 10m (WxD), filling of cracks with putty of Diamond shield with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/ Nylon brush. Removing all dust particles and washing with adequate water to clean completely. (ii) Providing and applying 1st coat of diamond shield or equivalent compound (having two component dry powder 80% Chemical 20% (chemical having 30% solid contents) making flexible waterproof and protective modified mortar with minimum thickness 70-80 micron after proper mixing of both the parts of compound along with laying of fiber glass mesh (of weaving size of 10x10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to set in natural air for minimum 2 Hrs. After 1st coat apply 2nd coat with minimum thickness 100 micron of the same compound. Allow the 2nd coat to set in natural air for minimum 4 Hrs. Total consumption of the diamond shield or equivalent in both coat should be @ 17.90 kg for 10sqm area. (iii) Over the above layers providing and applying 1st coat of sealer compound (Single component High Build elastomeric, flexible, pure acrylic waterproofing membranes having solid content of 65%) minimum 50-60 micron and allow it to set in natural air for minimum 2 Hrs. After 1st coat apply 2nd and final coat 120- 140 micron of sealer compound and allow it to set in natural air for minimum 4 Hrs. Consumption of Sealer compound should be @ 5.40 kg per 10 sqm area. The final area appearance of the coating will be milky white (iv) The treated area should be cure with water for 48 hrs by flooding the surface. All above operations to be done in order. The application shall be got done through the authorised applicator of the manufacturer. 544.64 358.00 sqm 194981.00 0 N 0 0

28 PWD BUILDING 2026 17.1.1 Repairs to plaster in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls with cement mortar 1:4 (1 cement : 4 fine sand) complete including disposal of rubbish to the dumping ground within 50metres lead : 1864.77 112.00 sqm 208854.00 0 N 0 0

29 PWD BUILDING 2026 14.85.1 Providing and applying for renewing Acrylic washable Distemper or lite economy Plastic emulsion paint having VOC content less than 50gms/ lit as per relevant I.S. Code 428:2000 (product such as Tractor Uno, Dulux acrylic distemper, Berger Bison, Opus Style/ lite economy emulsion product such as Asian Tactor Spark , Dulux Pomise sheen, Neroloc Litil Master, Berger Bison Lite, Nippon Superio.) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work. 1864.77 34.00 sqm 63402.00 0 N 0 0

30 PWD BUILDING 2026 9.16.2 Providing and fixing M.S. frames of doors, windows, ventilators and cupboards joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 39.20 62.00 sqm 2430.00 0 N 0 0

31 PWD BUILDING 2026 8.152 Providing and fixing 30mm thick factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45degree angle on either side forming styles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2 ) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per Manufacturer’s specification including 3 nos ISI marked stainless steel hinges of size 100x58x1.9 mm complete. (for W.C. and bathroom door shutter). PVC door shutter 3.20 1970.00 sqm 6304.00 0 N 0 0

32 PWD BUILDING 2026 18.17.1 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : White Size 550x450mm 1.00 1216.00 each 1216.00 0 N 0 0

33 PWD BUILDING 2026 19.42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 1000.000 6.00 litter 6000.00 0 N 0 0

Total 1693318.00

Say in Lacs 16.93

DETAILED ESTIMATE FOR SPECIAL REPAIR OF BUILDINGS UNDER SUB-DIVISION KESHKAL Badbattar Arandi 14 Qtr. GAD Total Qunt. Amount Badbattar Amount Arandi Amount 14 Qtr. Amount

SOR of Building Work for P.W.D. w.e.f. 10-06-2026 PAC 16.93 LACS

S. No. S.O.R. ITEM No. PARTICULARS MEASUREMENTS QTY. UNIT Rate Amount

1 16.8 Dismantling flag stone flooring laid in cement/lime mortar including stacking of serviceable material and disposal of unserviceable material within 50 metre lead.

2 16.9 Dismantling of old tarfelts of water proofing treatment of any course from the top of roof of any floor including disposal and removal of material with 50 metre lead.

14 Nos. Qtr. At Vishrampuri D 14x1 6.00 4.50 378.00

3 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.

Badbattar H.S. D 10 10

Arandi H.S.S. D 12 12

14 Nos. Qtr. At Vishrampuri D 14x2 28

4 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead..

Badbattar H.S. W 11 11

Arandi H.S.S. W 13 13

14 Nos. Qtr. At Vishrampuri W 28 28

5 16.28 Taking out door shutters (steel or wood) including stacking within 50 metres lead.

14 Nos. Qtr. At Vishrampuri D 14x2 28

6 16.7.2 Removing mortars from stones and concrete articles and cleaning the same. (Stacks of cleaned material shall be measured). In cement mortar

Badbattar H.S. slab front 1 28.10 13.00 0.02 7.31

Total (A) 10.27

7 16.37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead.

ceiling class room 5 7.00 5.00 175.00

front lobby 1 8.50 8.20 69.70

teachers room 1 4.00 4.50 18.00

principle 1 4.00 3.40 13.60

Inner side C.R 3x2 7.00 3.50 147.00

net qnty (ceiling+inner side) Total 619.61 sqm

ceiling class room 5 7.00 5.00 175.00

front lobby 1 8.50 8.20 69.70

teachers room 1 4.00 4.50 18.00

principle 1 4.00 3.40 13.60

Inner side C.R 5x2 7.00 3.5 245.00

net qnty (ceiling+inner side) Total 675.99 sqm

14 Nos. Qtr. At Vishrampuri

Total 1864.7650

Deduction Openning Door 2 0.90 2.10 -3.78

8 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer.

@ 35.80 kg/sqm Total 1994.10 kg

@ 35.80 kg/sqm Total 2301.26 kg

14 Nos. Qtr. At Vishrampuri

tacking @ 40kg/sqm Total 1344.00 kg

windows W 3 1.50 1.20 5.40

add welding weight charges @ 5.00% 18.67

Total 398.00 kg

9 3.1.3 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:3:6(1 cement : 3 coarse sand : 6 graded stoneaggregate 40mm nominalsize).

10 12.3.2 Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 50mmthick

Courtyard 2 6.10 4.00 48.80

11 8.12.2 Providing and fixing flush door shutters, conforming to IS : 2202 (Part- I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges. 35 mm. thick (single leaf)

14 Nos. Qtr. At Vishrampuri

12 8.107.2 Providing and fixing powder coated M.S. butt hinges with necessary iron screws: 100x58x1.90 mm

14 Nos. Qtr. At Vishrampuri 6x2 14.00 168.00

14 Nos. Qtr. At Vishrampuri 4x2 14.00 112.00

14 8.112.1 Providing and fixing powder coated M.S. sliding door bolts with bolts, nuts and necessary iron screws: 300x16 mm

14 Nos. Qtr. At Vishrampuri

15 8.115.2 Providing and fixing powder coated M.S. tower bolts (Barrel type) with necessary iron screws: 200 x10mm

14 Nos. Qtr. At Vishrampuri

16 8.116.1 Providing and fixing powder coated M.S. handles with necessary iron screws: 125 mm

14 Nos. Qtr. At Vishrampuri

17 8.119 Providing and fixing powder coated MS hanging door stopper with necessary powder coated MS steel screws complete.

18 8.148.1 Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge Extruded section Profile size 48x40 mm.

19 8.149.1 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. 24 mm thick door shutters with styles and rails of size 59x24 mm

20 4.13.1 Grading roof for water proofing treatment with: Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size)

Total (A) 38.52 sqm

Total (B) 33.72

21 3.12.1 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete: Thermo-Mechanically treated bars FE 415

Badbattar H.S. qnty as per item no. 20 (A) (repair)

taken 50kg/cum 1925.93

Arandi H.S.S. qnty as per item no. 20 (B) (repair)

taken 50kg/cum 1686.00

22 11.1.2 Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand)

Badbattar H.S. qnty as per item no.7 (dismentling) 395.69

Arandi H.S.S. qnty as per item no.7 (dismentling) 317.190

23 11.2.4 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)

qnty as per item no.7(dismentling) 223.92

qnty as per item no.7(dismentling) 358.80

Deduction Openning Door 2 0.90 2.10 -3.78

24 11.3.4 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)

Deduction Openning Door 2 0.90 2.10 -3.78

25 14.61 Providing and applying Synthatic oil bound washable Distemper having VOC content less than 50gms/ lit. Minimum two coats up to final finish to give an even shade applied 1.25 kg / 10Sqm as per relevant I.S. Code 428:2000 (product such as Asian Tractor synthatic distemper , Berger Bison Lite , Dulux Magik , Birla Opus Style super smart) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work.

qnty as per item no. 23 repair 223.92

qnty as per item no. 22 repair 395.69

Arandi H.S.S. qnty as per item no. 23 repair 358.80

qnty as per item no. 22 repair 317.19

26 14.71 Providing and applying satin/ matt finish Enamel paint mimimum 2 coats in all surface applying @ 0.75 lit/ 10 Sqm up to required finish as per relevent I.S. code 2932: 2013 of (Product such as Asian satin Enamel, Dulux Promise Premium Enamel, Nerolac Synthatic Enamel, Opus Prime enamel) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc. complete for the work.

14 Nos. Qtr. At Vishrampuri

27 4.22 Providing Water proofing treatment over Roof, Wall, Chhajjas, Balcony with Diamond Shield and Sealer coat or equivalent at leakage/ seepage area consisting of the operation: (i) Surface preparation roughening of surface, opening of cracks in ‘V’ groove in size of 5mm x 10m (WxD), filling of cracks with putty of Diamond shield with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/ Nylon brush. Removing all dust particles and washing with adequate water to clean completely. (ii) Providing and applying 1st coat of diamond shield or equivalent compound (having two component dry powder 80% Chemical 20% (chemical having 30% solid contents) making flexible waterproof and protective modified mortar with minimum thickness 70-80 micron after proper mixing of both the parts of compound along with laying of fiber glass mesh (of weaving size of 10x10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to set in natural air for minimum 2 Hrs. After 1st coat apply 2nd coat with minimum thickness 100 micron of the same compound. Allow the 2nd coat to set in natural air for minimum 4 Hrs. Total consumption of the diamond shield or equivalent in both coat should be @ 17.90 kg for 10sqm area. (iii) Over the above layers providing and applying 1st coat of sealer compound (Single component High Build elastomeric, flexible, pure acrylic waterproofing membranes having solid content of 65%) minimum 50-60 micron and allow it to set in natural air for minimum 2 Hrs. After 1st coat apply 2nd and final coat 120- 140 micron of sealer compound and allow it to set in natural air for minimum 4 Hrs. Consumption of Sealer compound should be @ 5.40 kg per 10 sqm area. The final area appearance of the coating will be milky white (iv) The treated area should be cure with water for 48 hrs by flooding the surface. All above operations to be done in order. The application shall be got done through the authorised applicator of the manufacturer.

14 Nos. Qtr. At Vishrampuri

28 17.1.1 Repairs to plaster in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls with cement mortar 1:4 (1 cement : 4 fine sand) complete including disposal of rubbish to the dumping ground within 50metres lead :

14 Nos. Qtr. At Vishrampuri

Inner room 14x6 2.15 2.15 388.29

29 14.85.1 Providing and applying for renewing Acrylic washable Distemper or lite economy Plastic emulsion paint having VOC content less than 50gms/ lit as per relevant I.S. Code 428:2000 (product such as Tractor Uno, Dulux acrylic distemper, Berger Bison, Opus Style/ lite economy emulsion product such as Asian Tactor Spark , Dulux Pomise sheen, Neroloc Litil Master, Berger Bison Lite, Nippon Superio.) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work.

14 Nos. Qtr. At Vishrampuri 14x6 2.15 2.15 388.29

30 9.16.2 Providing and fixing M.S. frames of doors, windows, ventilators and cupboards joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.

14 Nos. Qtr. At Vishrampuri

Tacking @ 3.5 kg/sqm 39.20

31 8.152 Providing and fixing 30mm thick factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45degree angle on either side forming styles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2 ) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per Manufacturer’s specification including 3 nos ISI marked stainless steel hinges of size 100x58x1.9 mm complete. (for W.C. and bathroom door shutter). PVC door shutter

14 Nos. Qtr. At Vishrampuri 2 0.80 2.00 3.20

32 18.17.1 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : White Size 550x450mm

33 19.42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

G. Total 1998327.64

Say in Lacs 19.98

DETAILED ESTIMATE FOR SPECIAL REPAIR OF BUILDINGS UNDER SUB-DIVISION KESHKAL Badbattar Arandi 14 Qtr. GAD Total Qunt. Amount Badbattar Amount Arandi Amount 14 Qtr. Amount

SOR of Building Work for P.W.D. w.e.f. 10-06-2026 PAC 16.93 LACS

S. No. S.O.R. ITEM No. PARTICULARS MEASUREMENTS QTY. UNIT Rate Amount

1 16.8 Dismantling flag stone flooring laid in cement/lime mortar including stacking of serviceable material and disposal of unserviceable material within 50 metre lead.

2 16.9 Dismantling of old tarfelts of water proofing treatment of any course from the top of roof of any floor including disposal and removal of material with 50 metre lead.

14 Nos. Qtr. At Vishrampuri D 14x1 6.00 4.50 378.00

3 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.

Badbattar H.S. D 10 10

Arandi H.S.S. D 12 12

14 Nos. Qtr. At Vishrampuri D 14x2 28

4 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead..

Badbattar H.S. W 11 11

Arandi H.S.S. W 13 13

14 Nos. Qtr. At Vishrampuri W 28 28

5 16.28 Taking out door shutters (steel or wood) including stacking within 50 metres lead.

14 Nos. Qtr. At Vishrampuri D 14x2 28

6 16.7.2 Removing mortars from stones and concrete articles and cleaning the same. (Stacks of cleaned material shall be measured). In cement mortar

Badbattar H.S. slab front 1 28.10 13.00 0.02 7.31

Total (A) 10.27

7 16.37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead.

ceiling class room 5 7.00 5.00 175.00

front lobby 1 8.50 8.20 69.70

teachers room 1 4.00 4.50 18.00

principle 1 4.00 3.40 13.60

Inner side C.R 3x2 7.00 3.50 147.00

net qnty (ceiling+inner side) Total 619.61 sqm

ceiling class room 5 7.00 5.00 175.00

front lobby 1 8.50 8.20 69.70

teachers room 1 4.00 4.50 18.00

principle 1 4.00 3.40 13.60

Inner side C.R 5x2 7.00 3.5 245.00

net qnty (ceiling+inner side) Total 675.99 sqm

14 Nos. Qtr. At Vishrampuri

Total 1864.7650

Deduction Openning Door 2 0.90 2.10 -3.78

8 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer.

@ 35.80 kg/sqm Total 1994.10 kg

@ 35.80 kg/sqm Total 2301.26 kg

14 Nos. Qtr. At Vishrampuri

tacking @ 40kg/sqm Total 1344.00 kg

windows W 3 1.50 1.20 5.40

add welding weight charges @ 5.00% 18.67

Total 398.00 kg

9 3.1.3 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:3:6(1 cement : 3 coarse sand : 6 graded stoneaggregate 40mm nominalsize).

10 12.3.2 Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 50mmthick

Courtyard 2 6.10 4.00 48.80

11 8.12.2 Providing and fixing flush door shutters, conforming to IS : 2202 (Part- I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges. 35 mm. thick (single leaf)

14 Nos. Qtr. At Vishrampuri

12 8.107.2 Providing and fixing powder coated M.S. butt hinges with necessary iron screws: 100x58x1.90 mm

14 Nos. Qtr. At Vishrampuri 6x2 14.00 168.00

14 Nos. Qtr. At Vishrampuri 4x2 14.00 112.00

14 8.112.1 Providing and fixing powder coated M.S. sliding door bolts with bolts, nuts and necessary iron screws: 300x16 mm

14 Nos. Qtr. At Vishrampuri

15 8.115.2 Providing and fixing powder coated M.S. tower bolts (Barrel type) with necessary iron screws: 200 x10mm

14 Nos. Qtr. At Vishrampuri

16 8.116.1 Providing and fixing powder coated M.S. handles with necessary iron screws: 125 mm

14 Nos. Qtr. At Vishrampuri

17 8.119 Providing and fixing powder coated MS hanging door stopper with necessary powder coated MS steel screws complete.

18 8.148.1 Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge Extruded section Profile size 48x40 mm.

19 8.149.1 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. 24 mm thick door shutters with styles and rails of size 59x24 mm

20 4.13.1 Grading roof for water proofing treatment with: Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size)

Total (A) 38.52 sqm

Total (B) 33.72

21 3.12.1 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete: Thermo-Mechanically treated bars FE 415

Badbattar H.S. qnty as per item no. 20 (A) (repair)

taken 50kg/cum 1925.93

Arandi H.S.S. qnty as per item no. 20 (B) (repair)

taken 50kg/cum 1686.00

22 11.1.2 Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand)

Badbattar H.S. qnty as per item no.7 (dismentling) 395.69

Arandi H.S.S. qnty as per item no.7 (dismentling) 317.190

23 11.2.4 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)

qnty as per item no.7(dismentling) 223.92

qnty as per item no.7(dismentling) 358.80

Deduction Openning Door 2 0.90 2.10 -3.78

24 11.3.4 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)

Deduction Openning Door 2 0.90 2.10 -3.78

25 14.61 Providing and applying Synthatic oil bound washable Distemper having VOC content less than 50gms/ lit. Minimum two coats up to final finish to give an even shade applied 1.25 kg / 10Sqm as per relevant I.S. Code 428:2000 (product such as Asian Tractor synthatic distemper , Berger Bison Lite , Dulux Magik , Birla Opus Style super smart) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work.

qnty as per item no. 23 repair 223.92

qnty as per item no. 22 repair 395.69

Arandi H.S.S. qnty as per item no. 23 repair 358.80

qnty as per item no. 22 repair 317.19

26 14.71 Providing and applying satin/ matt finish Enamel paint mimimum 2 coats in all surface applying @ 0.75 lit/ 10 Sqm up to required finish as per relevent I.S. code 2932: 2013 of (Product such as Asian satin Enamel, Dulux Promise Premium Enamel, Nerolac Synthatic Enamel, Opus Prime enamel) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc. complete for the work.

14 Nos. Qtr. At Vishrampuri

27 4.22 Providing Water proofing treatment over Roof, Wall, Chhajjas, Balcony with Diamond Shield and Sealer coat or equivalent at leakage/ seepage area consisting of the operation: (i) Surface preparation roughening of surface, opening of cracks in ‘V’ groove in size of 5mm x 10m (WxD), filling of cracks with putty of Diamond shield with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/ Nylon brush. Removing all dust particles and washing with adequate water to clean completely. (ii) Providing and applying 1st coat of diamond shield or equivalent compound (having two component dry powder 80% Chemical 20% (chemical having 30% solid contents) making flexible waterproof and protective modified mortar with minimum thickness 70-80 micron after proper mixing of both the parts of compound along with laying of fiber glass mesh (of weaving size of 10x10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to set in natural air for minimum 2 Hrs. After 1st coat apply 2nd coat with minimum thickness 100 micron of the same compound. Allow the 2nd coat to set in natural air for minimum 4 Hrs. Total consumption of the diamond shield or equivalent in both coat should be @ 17.90 kg for 10sqm area. (iii) Over the above layers providing and applying 1st coat of sealer compound (Single component High Build elastomeric, flexible, pure acrylic waterproofing membranes having solid content of 65%) minimum 50-60 micron and allow it to set in natural air for minimum 2 Hrs. After 1st coat apply 2nd and final coat 120- 140 micron of sealer compound and allow it to set in natural air for minimum 4 Hrs. Consumption of Sealer compound should be @ 5.40 kg per 10 sqm area. The final area appearance of the coating will be milky white (iv) The treated area should be cure with water for 48 hrs by flooding the surface. All above operations to be done in order. The application shall be got done through the authorised applicator of the manufacturer.

14 Nos. Qtr. At Vishrampuri

28 17.1.1 Repairs to plaster in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls with cement mortar 1:4 (1 cement : 4 fine sand) complete including disposal of rubbish to the dumping ground within 50metres lead :

14 Nos. Qtr. At Vishrampuri

Inner room 14x6 2.15 2.15 388.29

29 14.85.1 Providing and applying for renewing Acrylic washable Distemper or lite economy Plastic emulsion paint having VOC content less than 50gms/ lit as per relevant I.S. Code 428:2000 (product such as Tractor Uno, Dulux acrylic distemper, Berger Bison, Opus Style/ lite economy emulsion product such as Asian Tactor Spark , Dulux Pomise sheen, Neroloc Litil Master, Berger Bison Lite, Nippon Superio.) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work.

14 Nos. Qtr. At Vishrampuri 14x6 2.15 2.15 388.29

30 9.16.2 Providing and fixing M.S. frames of doors, windows, ventilators and cupboards joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.

14 Nos. Qtr. At Vishrampuri

Tacking @ 3.5 kg/sqm 39.20

31 8.152 Providing and fixing 30mm thick factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45degree angle on either side forming styles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2 ) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per Manufacturer’s specification including 3 nos ISI marked stainless steel hinges of size 100x58x1.9 mm complete. (for W.C. and bathroom door shutter). PVC door shutter

14 Nos. Qtr. At Vishrampuri 2 0.80 2.00 3.20

32 18.17.1 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : White Size 550x450mm

33 19.42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

G. Total 1998327.64

Say in Lacs 19.98