Providing Furniture and Related Allied Works for District Project Officers Office,DPDC Hall and Guarden Minsiter Office at Latur Tq.Dist.Latur.

ITEM No. 1 :-           SEAT ASSEMBLY: The Cushioned seat inner is made of injection moulded glass filled poly-amide. Upholstered seat sub-assembly consists of moulded High Resilience (HR) Polyurethane foam of Density 45+2 kg/m, and hardness load 16 + 2 kgf as per IS:7888 for 25% compression. *Seat SIZE: 45.5cm. (D) x 52.4cm. (W) BACK ASSEMBLY: The Cushioned back is made of PU Foam with Polypropylene Injection molded Plastic Inner. *HIGH BACK SIZE: 50.5 cm. (W) x 76.7 cm. (D) ARMRESTS: The armrest having four range of adjustments Height adjustment sub assembly is inserted in the Aluminum Die Cast Arm body & all other adjustment are provided in adjustable arm top sub assembly. Up-Down adjustment has 8 position (10.5+0.Scm range)- Arm top swivel adjustment- 2 position, 12+2 swivel inside Arm top width adjustment - Any position (2.0+0.Scm range each arm top) Arm top To - Fro Adjustment- any position (4.0+0.Scm range) Armrest top is made up of high density PU molded over glass filled Poly-amide inner. POSTURE PERFECT MECHANISM: The adjustable tilting mechanism is designed with the following features: 360 revolving type. Forward tilt of sesat and back. Upright tilt lock. Tilt tension adjustment can be operated in seating position. 3-position Tilt limiter. SEAT DEPTH ADJUSTMENT: Seat depth adjustment is housed below the seat and integrated with the mechanism with help of Polypropene Seat cover. Seat Depth can be adjusted in sitting position. Seat depth adjustment range is of 5.0+0.5 cm. ADJUSTABLE BACK SUPPORT: Back Assembly is connected to buff polish die cast aluminum Spine with an Up-Down mechanism assembly. Back Height can be adjusted in sitting position. It can be adjusted in the range of 7.5+0.5 cm. PNEUMATIC HEIGHT ADJUSTMENT: The heavy duty class 4 pneumatic height adjustment has an adjustment stroke of 13.0+0.3 cm. PEDESTAL: The pedestal is made of die-cast aluminium with buffing finish. It is fitted with Snos. twin wheel castor. The pedestal is 67.0 + 0.5cm pitch-center dia. TWIN WHEEL CASTOR: 5 Nos. twin wheel soft castors are injection moulded in Poly-amide with PU lining, having 6.5+0.1cm wheel Diameter and assembled to pedestal. WIDTH (W): 74.0 CM. DEPTH (D): 74.0 CM. HEIGHT (H): 112.0 - 132.5 CM. SEAT HEIGHT (SH): 44.5 - 58.0

ITEM No. 2 :-           POSTURE PERFECT VISITOR : SEAT ASSEMBLY: The Cushioned seat inner is made of injection moulded glass filled poly-amide. Upholstered seat sub-assembly consists of moulded High Resilience (HR) Polyurethane foam of Density 45+2 kg/m*, and hardness load 16 + 2 kgf as per IS:7888 for 25% compression. *Seat SIZE: 45.5cm. (D) x 52.4cm. (W) BACK ASSEMBLY: The Cushioned back is made of PU Foam with Polypropylene Injection molded Plastic Inner. *HIGH BACK SIZE: 50.5 cm. (W) x 76.7 cm. (D) ARMRESTS: The armrest having four range of adjustment Height adjustment sub assembly is inserted in the Aluminum Die Cast Arm body & all other adjustment are provided in adjustable arm top sub assembly. Up-Down adjustment has 8 position (10.5+0.Scm range) Arm top swivel adjustment- 2 position, 12+2 swivel inside Arm top width adjustment - Any position (2.0+0.Scm range each arm top) Arm top To - Fro Adjustment- any position (4.0+0.Scm range)- Armrest top is made up of high density PU molded over glass filled Poly-amide inner. POSTURE PERFECT MECHANISM: The adjustable tilting mechanism is designed with the following features: 360 revolving type. Forward tilt of sesat and back. - Upright tilt lock. Tilt tension adjustment can be operated in seating position. 3- position Tilt limiter. SEAT DEPTH ADJUSTMENT: Seat depth adjustment is housed below the seat and integrated with the mechanism with help of Polypropene Seat cover. Seat Depth can be adjusted in sitting position. Seat depth adjustment range is of 5.0+0.5 cm. ADJUSTABLE BACK SUPPORT: Back Assembly is connected to buff polish die cast aluminum Spine with an Up-Down mechanism assembly. Back Height can be adjusted in sitting position. It can be adjusted in the range of 7.5+0.5 cm. PNEUMATIC HEIGHT ADJUSTMENT: The heavy duty class 4 pneumatic height adjustment has an adjustment stroke of 13.0+0.3 cm PEDESTAL: The pedestal is made of die-cast aluminium with buffing finish. It is fitted with Snos. twin wheel castor. The pedestal is 67.0 + 0.5cm pitch-center dia.TWIN WHEEL CASTOR: 5 Nos. twin wheel soft castors are injection moulded in Poly-amide with PU lining, having 6.5+0.1 cm wheel Diameter and assembled to pedestal. WIDTH (W): 74.0 CM. DEPTH (D): 74.0 CM. HEIGHT (H): 112.0 -132.5 CM. SEAT HEIGHT (SH): 44.5 - 58.0 CM. As per Quotation

ITEM No. 3 :-           Bamboowood 12 mm thick Wall Cladding including Threshold & T-mold for Accoustic purpose : Providing & fixing in position Phenol bonded Bamboowood wall cladding at all height with planks of sizes 10 mm thick, 1900mm length (minimum) and 135mm wide approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC) with necessary profiled edges fixed with BR nails to frame work made of second class teak wood of size 50 x 50 mm in centre and ends of each tile. The bamboowood cladding shall be laid over glass wool of 50mm thickness filled in between two teak wood frame and hold in place by 50mm thick teak wood placed centre of two teak wood and covered with mesh (rabbit) fixed to teak woodframe work with wire nails as backlayment and covered with 1.00mm thick expanded poly ethylene foam of density 25Kilogram/cum in two layers first layer on wall surface before fixing wooden frame and second layer on frame under cladding. The Bamboowood planks shall have minimum density of 1000 Kilogram/cum & minimum Hardness 1000 Kilogramf. with Eco friendly UV coating, all complete as per direction of As per Quotation

ITEM No. 4 :-           Providing supplying and fixing Acrylic/oil colors pantings On Canvas. Providing art work should have been created on the winsor and Newton cotton canvas and the canvas should be of 10. OZ thickness the texture of canvas should be fine grain and oil / Acrylic colours used to create the artwork are from the winsor and Newton linseed oil and liquin to apply and mixing for oil colours, after finishing the artwork a coat of varnish should be applied On the artwork the wooden stretcher required for the artwork is made up ofpine wood planks 1.5 Inch by 1.5 inch thickness. Fibre frame should be applied for exterior decoration of the Art Work. Art work should be supplied On the location and displayed the wall as per requirement and instructions. As per Sanctioned Rate

ITEM No. 5 :-           SUPPLYING & FIXING HIGH RELIEF FRP sculpture / mural on the wall. A) first Creat the Shadow soil model according to the size and drawing. B)Production should be made from dove craving rubble molds for FRP casting. C)FRP material 150 gelcoat MS lubrication bonding with oven matte colour D)Work should be done in polyurehane spray colour matte/metallic stone culour for Indoor and outdoor sculpture and mural E)Work should be done with the lacquer and sun coat spray As per Sanctioned Rate.

ITEM No. 6 :-           Clean the wall: to remove any dirt or debris. Repair holes and cracks: in the wall surface. Sand the wall: to create a smooth, even surface for painting. Wipe away any sanding residue: with a dry cloth. Apply a coat of acrylic primer: to the entire wall to ensure good paint adhesion and coverage. painting will be created on a given topic and colored with acrylic colors. As per Sanctioned Rate

ITEM No. 7 :-           A) SUPPLYING, PROVIDING AND FIXING SS BOX LETTERS Material : SS 304 grade 0.8 thickness. Letters/alphabet cutting in laser sorce. 1 inch molding surrounded to alphabet. 5 millimetre nut brezing inside the molding on sufficient distance for letters feeting. Full thrade SS road as per size of nuts for feeting on wall / background surface for Installation. B) SUPPLYING AND FIXING FOLLOWING MATERIAL-SS 1.5 Mm Thickness. A)Chemical Etching (engraving) For Design & Matter (0.02 millimetre) Deep Etching. B)Stowing Paint feel in to design and matter as per colour choice. C)After feeling colour heating processed for 1hr. D)epoxy gloss lamination on surface of product end to end (1 millimetre thick). E) 3 inch X 1 inch wooden frame surrounding to the product with wood polish and Wall hanging Clips on the Background f) Transportation and installation at site. SUPPLYING AND FIXING FOLLOWING MATERIAL-Material: Brass 1.5 millimetre thickness for PREAMBL. A) Chemical Etching (engraving) For Design & Matter (0.02 millimetre) Deep Etching. B)Stowing Paint feel in to design and matter as per colour choice. C)After feeling colour heating processed for 1hr. D)epoxy gloss lamination on surface of product end to end (1 millimetre thick). E)3 inch x 1 inch wooden frame surrounding to the product with wood polish and Wall hanging Clips on the Background f) Transportation and Installation at site.

ITEM No. 8 :-           SUPPLYING AND FIXING FOLLOWING MATERIAL- Material: Brass 1.5 millimetre Thickness for PREAMBL A)Chemical Etching (engraving) For Design & Matter (0.02 millimetre) Deep Etching B)Stowing Paint feel in to design and matter as per colour choice C)After feeling colour heating processed for 1hr D)epoxy gloss lamination on surface of product end to end (1 millimetre thick) E)3 inch x 1 inch wooden frame surrounding to the product with wood polish and Wall hanging Clips on the Background f) Transportation and Installation at site As per Sanctioned Rate

ITEM No. 9 :-           SUPPLYING AND FIXING HIGH RELIEF FRP sculpture/mural on the wall. A) first Creat the Shadow soil model according to the size and drawing. B)Production should be made from dove craving rubble molds for FRP casting. C) FRP material 150 gelcoat MS lubrication bonding with oven matte colour D Work should be done in polyurehane spray colour matte/metallic stone colour for Indoor and outdoor sculpture and mural E) Work should be done with the lacquer and sun coat spray As per Sanctioned Rate